The NanoSwitch N-SW is an outdoor 4-port Gigabit switch with PoE passthrough.Power Strip Simplicity for 24V Devices Simply providing 24V 2-pair input makes NanoSwitch an outdoor 4-port unmanaged switch with "always on" 24V 2-pair output on three ports.PoE Passthrough PoE In - RJ45 port supports 10/100/1000 Ethernet connections, and supports passive 24V, 2-pair PoE to power the switch. PoE Out - RJ45 ports support 10/100/1000 Ethernet connections, and the three passive 24V, 2-pair PoE ports provide up to 24W PoE output. Designed for Outdoor Durability The NanoSwitch features an outdoor weatherproof form factor.Operating Temperature: -30 to 70° C (-22 to 158° F)
Most powerful and feature rich device within Teltonika Networking products range. Equipped with Dual-SIM, 4 x Gigabit Ethernet ports, Dual-Band AC WiFi, Bluetooth LE and USB interfaces. RUTX11 comes with all RutOS software and security features. This device is perfect for advanced Industrial and Enterprise applications.HARDWAREMobile4G (LTE) – Cat 6 DL up to 300 Mbps, UL up to 50Mbps; DC-HSDPA; HSUPA; WCDMACPUQuad Core ARM Cortex A7 717 MHz CPUMemory256 MBytes Flash, 256 MBytes DDR3 RAMEthernet4 x 1 Gbit Ethernet ports: 1 x WAN (configurable as LAN), 3 x LANWiFiDual-Band 802.11ac Wave 2 (WiFi 5) with MU-MIMO support and data transmission rates up to 867 Mbps.Power supply9 - 50 VDC, 4 pin DC connectorConnectors1 x 4 pin DC, 4 x Ethernet, 2 x Mobile SMA, 2 x WiFi RP-SMA, 1 x GPS SMASIM2 x external SIM holdersStatus LEDs1 x Power, 2 x SIM, 3 x Mobile network type, 5 x Signal Strength, 2 x WiFi band status, 1 x WiFi status, 8 x Ethernet status, 4 x WAN type LEDsOperating temperature-40 °C to 75 °CHousingFull aluminium with grounding terminalDimensions115 mm x 95 mm x 44 mmWeight456 gSOFTWAREOperating systemRutOS (OpenWrt based Linux OS)SIM switch2 SIM cards, auto-switch cases: data limit, roaming, no network, network denied, data connection failMultiple PDNPossibility to use different PDNs for multiple network access and servicesNetwork protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DHCP, DNS, HTTP, HTTPS, SMTP, SSL v3, TLS, ARP, PPPoE, UPNP, SSH, TelnetNetworking featuresNAT, Static/Dynamic routing, Firewall, OpenVPN, IPSec, H.232 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packetsUnique networking featuresVLAN, Mobile quota control, WEB Filter, Load Balancing, Network Backup, Auto FailoverConnection monitoringPing Reboot, Periodic Reboot, LCP and ICMP for link inspectionAutheticationPre-shared key, digital certificates, X.509 certificatesKeep settingsUpdate FW without losing current configurationMonitoring & ManagementWEB UI, SSH, SMS, SNMP, JSON-RPC, FOTA, RMSSupported languagesBusybox shell, Lua, C, C++Development toolsSDK package with build environment provided
5-Port 10/100/1,000 Mbps Desktop Switch Five 10/100/1,000 Mbps auto-negotiation RJ45 ports with auto MDI / MDIX supported Easily wired network expansion Compact design for flexible arrangement Plug and play setup, no configuration required Green Ethernet technology saves power by up to 82%
Direct attach cable that supports not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard!Mikrotik is releasing new direct attach cables that support not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! This is highly cost-effective way to connect two SFP/SFP+/SFP28 devices (for example two units of new CCR2004-1G-12S+2XS) for very short distances within racks and across adjacent racks. They provide a low cost low power and low latency interconnect solution for 25-Gigabit Ethernet Fiber Channel and other industry standards and are direct attached compliant and fully conform to the SFP+ MSA specifications.Two versions are available- XS+DA0001 (1m) and XS+DA0003 (3m)
netFiber 9 is a powerful outdoor switch with SFP SFP+ and Gigabit Ethernet. It features a powerful ARM v7 CPU 256 MB of RAM 4x 10G SFP+ ports and an advanced Marvell switch-chip that can handle even the heaviest loads. The Gigabit Ethernet port is not just for management purposes. It has a direct connection to the switch chip – so you can enjoy full gigabit speed. This port also supports PoE-in so you don’t have to rely on the DC jack for powering in tight hard-to-reach spots. There is a console port followed by five regular SFP ports and four SFP+ ports for that sweet 10 Gbps networking. This means there might be quite a lot of wires for you to organize at some point. That’s why Mikrotik designed the case to have some handy little additional features on the bottom of the case to help you keep everything neat and tidy.The sturdy case provides decent protection in dusty environments with occasional splashes of water. Perfect for outdoors with some light coverage – like a roof overhang or a simple cabinet.There is a massive heatsink on the back that serves two purposes. Not only it provides outstanding heat dissipation it also moves the center of mass towards the side with all the mounting options – keeping the board firm and strong upon installation. The package includes metal hose clamps and screws so you can attach the netFiber to a pole wall or mast right away.netFiber 9 is an amazing tool for anyone working with connections over 100 meters while keeping data loss and ping low. Optic fiber can be a great alternative to copper if you are worried about electromagnetic interference or maybe even tampering and eavesdropping. With 10 ports a powerful CPU and a rugged case netFiber 9 is a real bargain that will make your network management so much easier!
Antenna kit for LoRa® with a 6.5 dBi Omni antenna for 824-960 MHz 1 m long SMA cable and mechanical holder for quick and easy mast attachment.The new kit offers significantly higher durability in a smaller package – without sacrificing performance. The improved cable durability and the added IP66 water resistance with protection against powerful jets make this kit an excellent choice for all kinds of marine and coastal projects.Mount this antenna on a 25-50 mm mast or on the wall and enjoy the superb coverage!
Connection: 1 x LAN (RJ45) 10/100/1000/2500 Mbps networks with automatic recognition Conforms with: IEEE802.3, IEEE802.3u & IEEE802.3ab specification Chipset: Realtek RTL8125B - 2500Base-T Ethernet Controller Supports: auto MDI/MDIX crossover PCI Express: Specification 2.1 Wake-on-LAN (WOL): Yes IEEE802.1q VLAN tagging: Yes LED operating display: Active / data traffic / 2.5G data traffic Supported operating systems: Windows 7/8/10 (32/64Bit), Windows Server 2008 R2/2012 R2/2016, Linux 4 and higher Operating temperature: 5 °C to +50 °C Dimensions (WxDxH): 12 x 9.8 x 2.2 cm Weight: 35.2 g
The 10 Gbps Direct Attach Cable is an SFP+ compatible cable capable of sustaining 10 Gbps throughput. This cable is perfect for creating short links between switches that deliver 10 Gbps speed throughout your network.
RUT142 on kompaktne tööstuslik Ethernet-marsruuter, mis suurendab turvalisust lõppseadmete võrguisolatsiooni abil. Varustatud RS232 jadaliidese, kahe Ethernet-porti, DIN-riba klambri ja tööstusliku 3-poolse pistiku abil, tagab see tõrgeteta ühenduvuse ja lihtsa paigalduse. Marsruuter on varustatud RutOSi, Wi-Fi 4 ja toetab tööstuslikke protokolle, nagu Modbus, DLMS, DNP3 ja OPC UA, ning on ühilduv RMSiga, et tagada tõhus kaug- ja kohapealne juhtimine.ÜHENDUS2 x 10/100 Mbit/s Ethernet-porti, Wi-Fi 4JADALIIDESRS232 jadakommunikatsiooniksTÖÖSTUSLIK DISAINIntegreeritud DIN-riba klamber ja 3-poolne toitepistikRMSKaugjuhtimine, juurdepääs ja VPN-teenused
TL-SG1210MPE 10-Port Gigabit Easy Smart Switch with 8-Port PoE+ - 9× gigabit RJ45 ports and 1× combo gigabit SFP/RJ45 port - Equipped with eight 802.3af/at PoE+ ports with up to 30 W for each port, the switch can transfer data and power via one single cable - Supports PoE power up to 123 W for all PoE ports* - Provides network monitoring, traffic prioritization, VLAN features, and PoE Auto Recovery - Simple network set-up on top of plug-and-play connectivity - Web-based user interface and Easy Smart Configuration Utility simplify configuration - Fanless design lowers energy consumption and eliminates operating noise
Type 3G/4G Modem | Data transmission speed 300 Mbps | Number of antennas 2 | Wireless Frequency Range 2.4 GHz | Wireless Transmit Power 20 dBm | Power supply requirements 12V/1A DC | Dimensions 226.6 x 100x 54.7mm
8-Port 10/100Mbps Desktop Switch • Eight 10/100Mbps Auto-Negotiation RJ45 Ports with Auto MDI / MDIX Support • Easily wired network expansion • Compact design for exible arrangement • Plug and play setup, no conguration required
Original part number PP6U-5M/BK Product name Gembird UTP Cat6 Patch cord, 5 m, black Producer Gembird Class of product Patchcord network cable Wiring type CAT6 Length 5 m Category 6 Coating type PVC - polyvinyl chloride Plug 1 type 1 x RJ45 Plug 2 type 1 x RJ45 Cross-Over No Colour Black
Range Extender, Data transmission speed 733 Mbps, IEEE 802.11a/b/g/n/ac, 1x10/100M, Number of antennas 2, Wireless Frequency Range 2.4GHz & 5GHz, Dimensions 156.5 x 101.5 x 95mm
Price/Performance Breakthrough The EdgeRouter™ 4 offers next-generation price/performance value: up to 3.4 million packets per second processing with a line rate of up to 4 Gbps. Versatile Design The EdgeRouter 4 can be rack-mounted with the use of the EdgeRouter Rack Mount Kit model ER-RMKIT (sold separately). Centralized Management The EdgeRouter 4 is supported and managed by UNMS™ (Ubiquiti® Network Management System) a comprehensive controller with an intuitive UI. A single control plane manages registered EdgeMAX® devices across multiple sites.
