Mini-GBIC Multi-Mode LC ModuleTE100-MGBFX (Version v1.0R)Compatible with standard SFP (Mini-GBIC) slotsSupports 100Mbps connection speedsSupports 1310 nm Multi-Mode network transmissionsCompatible with Duplex-LC fiber connector typesSupports fiber connections for distances up to 2 km (1.2 miles)The Mini-GBIC Multi-Mode LC Module, model TE100-MGBFX, works with standard SFP (Mini-GBIC) slots on most switches and supports Multi-Mode network transmissions speeds of 100Mbps. The TE100-MGBSX is compatible with Duplex-LC fiber connector types and supports fiber optic connection distances of up to 2 kilometers (1.2 miles).Industry standard SFP connector typeCompliant with Fast Ethernet standardSupports 1310 nm Multi-Mode network transmissionsCompatible with Duplex-LC fiber connector typesSupports fiber connections for distances up to 2 km (1.2 miles)Different Low Voltage positive-coupled logic (LVPECL) inputs and outputsPower consumption: 3.3VHot pluggable3-year limited warranty
The TUC-ETG is a high-speed USB network adapter that allows you to easily connect to a gigabit network from a USB Type-C enabled desktop, MacBook®, or notebook PC. Compliant with a USB Type-C port and backwards compatible with USB 3.0, 2.0 and 1.1 speeds, you can share files and printers and gain access to broadband Internet.USB Type-C Easily connect to a gigabit network from a USB Type-C enabled desktop, MacBook®, or notebook PC.Compatibility Compatible with Windows® and Mac®operating systems.Gigabit Speeds Experience Full Duplex 2 Gbps Ethernet speeds with this compact USB Type-C to Gigabit adapter. Easy Setup Simple installation in minutesFlexible Connector Attached flexible 12.7 cm (5 in.) USB cable accommodates most installation scenariosUSB Powered No bulky power brick—compact adapter powered by USB port
Hardened Industrial 100/1000 Base-T to SFP Media Converter TI-F11SFP (Version v1.0R) Hardened IP30 rated 100/1000 Base-T Ethernet to SFP converter SFP port accommodates Multi or Single Mode fiber Up to 80 km fiber networking distances with the TEG-MGBS80 SFP module Includes DIN-rail and wall mounts Extreme -40 to 75 ºC (-40 to 167 ºF) operating temperature range Dual redundant power inputs with overload current protection Powers supply sold separately (model TI-M6024)
The pair of Mini-GBIC Single Mode module works with standard Mini-GBIC slots on most switches. The pair of Dual Wavelength Single Mode LC Type modules must be used together in order to span distances up to 10km (6.2 miles). Two modules are included, each with 1 x 1000Mbps-LX (LC Simplex -Type) Mini-GBIC connector.Andmeedastuskiirus (maksimaalne)1000 Mbit/sLiidese tüüpSFPFiiberoptiline pistmikLCVõrgustandardidIEEE 802.3,IEEE 802.3ab,IEEE 802.3uSFP-transiiveri tüüpLRKaabli tüüpSingle-modeIsehäälestuvJahKäigultvahetusJahMaksimaalne ülekandekaugus40000 m
TRENDnet’s TI-F10S30 is a compact IP40 rated 100Base-FX fiber converter with hardened components rated for extreme industrial environments. It accommodates long distance networking with 100Base-FX Single-Mode fiber over distances of up to 30 km (18.6 miles). Both DIN-rail and wall mount hardware is included. Power supply sold separately: model TI-M6024.Andmeedastuskiirus (maksimaalne)200 Mbit/sKonverteri sisendi liides100Base-TXKonverteri väljundi liides100Base-FXVõrgustandardidIEEE 802.3,IEEE 802.3u,IEEE 802.3xEthernet-liidese tüüpKiire EthernetEthernet LAN-i andmeedastuskiirused10,100 Mbit/sEtherneti vaskkaablite tehnoloogia10BASE-T,100BASE-TXEtherneti kiudkaablite tehnoloogia100BASE-FXVoo reguleerimise tugiJahAutomaatne ühildumineJahDupleks-süsteemTäisversioon, PoolFiiberoptiline pistmikSCÜhenduvustehnoloogiaJuhtmega ühendatudEthernet LAN (RJ-45) pordid1Kiudjuhtme portide arv1Maksimaalne ülekandekaugus30000 mLainepikkus1310 nmKiustruktuurÜksikrežiimToetatud kiudkaabli läbimõõt9/125Lingi bilanss7 dBSisemineEiLED-indikaatoridJahToote värvMustKorpuse materjalMetallRahvusvahelise kaitse (IP) koodIP40DIN-liistu paigaldamineJahSisendpinge12-60Elektritarbimine (max)1,92 WKiirpaigaldusjuhendJahKasutamistemperatuur (T-T)-40 - 75 °CSertifikaatFCC, CELaius60 mmSügavus50 mmKõrgus35 mmKaal90 g
Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: "Cat.6A S/FTP patch cords with 600MHz raw cable".Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.Available colours: Black, Blue, Grey, Red, White.
Twisted Pair Patch Cable with RJ45 connectorsCat.6 F/UTP, CCAIntegrated snagless connector for latch protectionGold plated pins for better conductivity and elimination of signal loss10 year warrantyCat.6 F/UTP CCA network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.Cat.6 cable for operating frequencies up to 250Mhz in a shielded version with foil shielding (F/UTP). Cat.6 cables are widespread throughout the professional sector. They are ideal for Gigabit Ethernet or AV extension applications. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.The high frequencies used in network technology cause a high current load in the outer layers of the conductors due to the "skin effect", while the conductor cores are only subjected to very low electrical loads. This allows the use of copper clad aluminium (CCA) conductor material, making this cable more cost-effective than pure copper cables.Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m.
Wireless Router, Available bandwidth 1200 Mbps, IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac, 1 WAN, 4x10/100M, 64, 128-bit WEP, WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access, DHCP, Number of antennas 4, Wireless Frequency Range 2.4GHz and 5GHz, Windows 10, Windows 8, Windows 7, Linux, MacOS, Windows XP, Windows Vista, Power supply requirements 9VDC / 0.85A, Dimensions 229.87 x 144.19 x 36.85 mm
TPA-C5xTwistPort Adaptor for Mimosa C5x What is TwistPortTM Adaptor TwistPort Adaptor TPA-C5x adapts Mimosa® C5x radios to RF elements® proprietary TwistPort waveguide connector. Integration of the radio is smooth and easy. Making Mimosa® C5x radios compatible with TwistPort allows for using the radio with any TwistPort antenna ever made and enable superior performance noise immunity and network scalability. Dual Slant or H+VTPA-C5x allows to choose between Dual Slant polarization setup or H+V polarization setup. Market Leading PerformanceTwistPort Adaptors cover an ultra-wideband spectrum of 5180-6400 MHz and perform with superb efficiency with very well managed VSWR across the spectrum.
CAT7 SSTP Patch CableCategory 7/Class F (ISO/IEC 11801) cable specifications require transmission frequencies of up to 600 MHz over 100 meters of fully shielded copper cabling. CAT7 cable consists of four individually shielded pairs inside an overall braided shield also known as Shielded Twisted Pair Cable (SSTP) or S/FTP (Shielded Foil Twisted Pair). CAT7 features even more stringent specifications for crosstalk and system noise than CAT6 and is designed specifically for Gigabit Ethernet applications (Gigabit over copper).Vention CAT7 cables exceed the current ISO/IEC specifications and represent the next generation in Ethernet over copper.Used to connect your network device to any of the following: 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Backwards compatible with CAT5 CAT5e CAT6 and CAT6a equipment.Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel. Complies with TIA/EIA 568B standard.Virtually eliminates alien crosstalk and interference.Performance rated beyond 600 MHz.
CAT7 SSTP Patch CableCategory 7/Class F (ISO/IEC 11801) cable specifications require transmission frequencies of up to 600 MHz over 100 meters of fully shielded copper cabling. CAT7 cable consists of four individually shielded pairs inside an overall braided shield also known as Shielded Twisted Pair Cable (SSTP) or S/FTP (Shielded Foil Twisted Pair). CAT7 features even more stringent specifications for crosstalk and system noise than CAT6 and is designed specifically for Gigabit Ethernet applications (Gigabit over copper).Vention CAT7 cables exceed the current ISO/IEC specifications and represent the next generation in Ethernet over copper.Used to connect your network device to any of the following: 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Backwards compatible with CAT5 CAT5e CAT6 and CAT6a equipment.Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel. Complies with TIA/EIA 568B standard.Virtually eliminates alien crosstalk and interference.Performance rated beyond 600 MHz.
Schutzkontakt-Steckdosenleiste, mit sechs Anschlüssen, Überspannungsschutz mit max. Ableitstrom bis zu 19.500 A, erhöhter Berührungsschutz, Master-Slave-Funktion (1x Master / 5x Slave), einstellbare Schaltwelle (ca. 8 bis 80 W), zweipoliger Ein-/Ausschalter, Gesamtleistung max. 16 A / 3.500 W, Stecksystem DE (Stecker-Typ F)
