This Wireless LAN antenna can be connected to a WLAN device with RP-SMA interface, in order to send and receive signals. Specification • Connector: RP-SMA plug • Frequency range: 2.400 - 2.500 GHz 5.150 - 5.875 GHz • Antenna gain: 5 dBi @ 2.400 - 2.500 GHz 7 dBi @ 5.150 - 5.875 GHz • Impedance: 50 Ohm • Polarisation: linear, vertical • VSWR: 2.5 • Operating temperature: -10 °C ~ 55 °C • Housing material: ABS • Colour: black • Length: ca. 231.50 mm (with tilt joint) ca. 199.20 mm (without tilt joint) • Diameter: ca. 19.70 mm (top) ca. 21.50 mm (max.) ca. 13.15 mm (RP-SMA) System requirements • Device with a free RP-SMA jack Package content • WLAN antenna
AstroAI digital tire pressure gauge 072711 230PSIAstroAI digital tire pressure gauge is designed for monitoring tire pressure of cars, trucks, motorcycles, as well as bicycles. With a measuring range of up to 230 PSI and a resolution of 0.1 PSI, the device allows precise readings. It requires 2 AAA batteries (included) to power it.Practical, durable designThe dual head allows easy and convenient connection to various types of valves, including twin wheels. Ergonomic rubber handle provides a stable grip for increased comfort.Intuitive operation and easy-to-read displayThe meter features an LCD display that guarantees convenient reading of results even in low-light conditions. An easy-to-use button allows you to quickly turn it on, change measurement units (PSI, BAR, kPa, kg/cm²) and turn the device off. An added bonus is the built-in flashlight.Compact and portableThanks to its compact dimensions (12.2 x 1.77 x 1.2 inches), the meter fits easily into a car glove box or tool bag.Included:Digital tire pressure gaugeAAA battery x2 ManufacturerAstroAIManufacturer codeGL-0911Measuring unitsPSI, BAR, kPa, kg/cm²Measuring range0-230 PSI / 0-16 BAR / 0-1600 kPa / 0-16 kg/cm²DisplayBacklit LCDDisplay resolution0.1 PSIOperating temperature-5°C to 50°C (23°F-122°F)Power supply2 AAA batteries (included)
Habotest HT118E Universal Digital Multimeter True RMS NCVThe Habotest HT118E is a versatile digital multimeter that supports up to 20,000 counts and offers precise measurements of AC/DC voltage, current, resistance, capacitance, frequency and temperature (-20°C to 1000°C). A True RMS function ensures accurate readings, and non-contact voltage detection (NCV) enhances operational safety. A large LCD display with backlight, LED flashlight, automatic range selection, and built-in stand provide comfort in all conditions.Wide range of measurementsThe HT118E multimeter offers measurement of AC/DC voltage up to 1000V, current up to 10A, resistance up to 100MΩ, capacitance up to 2mF and frequency up to 20MHz. The ability to test diodes, check circuit continuity, and measure minimum and maximum values makes it an extremely functional tool for electronics engineers, electricians and do-it-yourselfers.NCV and Live Test functionWith non-contact voltage detection (NCV), you can check the presence of voltage in wires without physical contact. Live Test allows you to quickly detect a live wire, and a built-in audible and light alarm signals the danger.Backlit screen and result memoryThe HT118E features an easy-to-read, 2.7-inch LCD display with dual backlighting that automatically turns orange when 80V or 1A is exceeded, warning of high voltage. A data storage function saves measurement results, and a dynamic bar graph makes analysis easy.Durability and safetyA double fuse protects both the multimeter and the electrical system under test. The housing with protective silicone covering protects against mechanical damage and electric shock. CAT III 1000V and CAT IV 600V safety certifications ensure that the multimeter can be used even at high voltages.Practical solutionsThe built-in LED flashlight allows work in dark rooms, and the stable stand allows comfortable use without holding the meter in your hand. Flexible cable extrusions help keep the work area tidy. Power is provided by 2 AA batteries (included), and an automatic shut-off function after 15 minutes extends the operating time.Included:Habotest HT118E True RMS NCV digital multimeterMeasurement cable x2 (red and black)Thermocouple for temperature measurementAA battery x2Protective cover ManufacturerHabotestManufacturer codeHT118EDC voltage200mV / 2V / 20V / 200V / 1000VAC voltage200mV / 2V / 20V / 200V / 750VDC current200μA / 2000μA / 20mA / 200mA / 10AAC current200μA / 2000μA / 20mA / 200mA / 10AResistance200Ω / 2kΩ / 20kΩ / 200kΩ / 2MΩ / 20MΩ / 100MΩCapacitance20nF / 200nF / 2μF / 20μF / 200μF / 2mFFrequency200Hz / 2kHz / 20kHz / 200kHz / 2MHz / 20MHzTemperature rangefrom -20°C to 1000°CSampling frequency~3 times/secondNumber of counts20 000Display2.7" LCDDual backlightyesLive Test (live wire test)yes, audible and light alarmNon-contact voltage detection (NCV)yes, audible and light alarmDiode testingyesMax/min value measurementyesData storageyesTrue RMyesFrequency response1kHzAutomatic shutdownyesLow battery indicatoryesActive jack indicatoryesLED flashlightyesPower supply2x AA batteryHousing materialABS with silicone protective coverSafety standardsEN61010-1, -2-030, EN61010-2-033, EN61326-1, CAT III 1000V, CAT IV 600V
Intelligent 1000Base-T to 1000Base-LX Single-Mode SC Fiber Converter (20km/12.4miles) TFC-1000S20 (Version C1.0R) SC-type single-mode fiber port connects over distances of up to 20km (12.4 miles) 1000Base-T Gigabit copper port supports Full-Duplex mode Supports port level SNMP management Functions as a stand alone converter or with the TFC-1600 fiber chassis The TFC-1000S20 Intelligent Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Single Mode SC-Type fiber converter that supports SNMP and spans distances up to 20km (12.4miles). Ports include 1 x 1000Base-T (RJ-45) port and 1 x 1000Base-LX (SC-Type) port. Compliant with IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX standards 1 x 1000Base-T RJ-45 port 1 x 1000Base-LX single-mode SC type fiber port Provides Dip switch to set: Fiber (Forced/Auto-Negotiation), LLR (Enable/Disable) Support LLCF (Link Loss Carry Forward, Link Pass Through) Support LLR (link Loss Return) for Fiber port Monitor and configure Ethernet or Fiber’s duplex mode, LLR, port on/off and receive link down information via management module TFC-1600MM and chassis TFC-1600 Status LED indicators for Power and Link/Activity Wall mountable Optional 19” system chassis with redundant power supply (TFC-1600), holds up to 16 TFC series Media Converters 3-year limited warranty
To prevent Ethernet devices from possible damage caused by surge voltages as a result of lightning strikes, PLANET has released a new Ethernet Lightning Arrest Box especially made in the current Ethernet environment. The ELA-100 Ethernet Lightning Arrest Box provides two passive 10 / 100 / 1000Base-T interfaces for connection of two Ethernet devices and one ground position for earth. The ELA-100 Ethernet Lightning Arrest Box is the ideal solution to preventing damages to Ethernet devices from surge voltages caused by lightning strikes. Outdoor Installation of Ethernet Lightning Arrest Box When installing the ELA-100 in an outdoor place with shelter, the Ethernet Lightning Arrest Box must be earthed or else the Ethernet Lightning Arrest Box may get electric shock and damage. Then connect two Ethernet devices to the two passive 10/100/1000Base-T ports (protected port and un-protected port) of Ethernet Lightning Arrest Box for lightning strike prevention.
Original part number 560283 Product name Intellinet patch panel 19" 48 ports UTP kat.6 2U Black Producer Intellinet Network Solutions Class of product Patchpanel 19"&10" Number of ports 48 Type of connector RJ45 Category 6 Wiring type UTP - unschielded twisted pair cable, 4 pairs Additional information Compatible with both 110 and Krone punch-down toolsSupports 22 to 26 AWG stranded and solid wireFor use with unshielded twisted pair (UTP) Cat6 network cableCat6 compliant to ANSI/TIA/EIA 568 B.2-1Ideal for Ethernet, Fast Ethernet and Gigabit Ethernet network applicationsFinishing network by RJ-45 portsMeets 19" rackmount standards Height 2 U Width 19 inches Net weight 1.27 kg Colour Black
The hot-swappable AC/DC PSU modul are compatible with the EdgeRouter Infinity and UFiber OLT. The second module can be used as a backup to the primary PSU.AC/DC 100W for 110 - 240VAC InputPower Options The UFiber OLT includes an AC/DC power module. You have the option to add a second AC/DC power module or use a DC/DC power module for DC power. The EdgeRouter Infinity includes two AC/DC power modules. You have the option to substitute in a DC/DC power module.
