Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: Cat6 pikkus: 2 m Category: 6 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: Cat6 pikkus: 1.5 m Category: 6 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
Ubiquiti Networks set the bar for the world's first low-cost and efficient broadband Customer Premises Equipment (CPE) with the NanoStation® M. The NanoStation AC and NanoStation AC loco take the same concept to the future with sleek form factors, along with integrated airMAX (MIMO TDMA protocol) technology and dedicated Wi-Fi management. The radio and antenna are combined to create a more efficient and compact CPE. The NanoStation AC and NanoStation AC loco get maximum gain out of the smallest footprint. The low cost, high performance, and small form factor of the NanoStation AC and NanoStation AC loco make them extremely versatile and economical to deploy. Sleek Industrial Design The NanoStation AC and NanoStation AC loco represent the next evolution of the iconic CPE design that revolutionized the Wireless ISP industry. Dual Ethernet Connectivity The NanoStation AC provides a secondary Ethernet port with software-enabled PoE. Use this port to conveniently power an external device, such as a PoE security camera, for seamless IP video integration.Management Wi-Fi Radio Each NanoStation AC model integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.Improved Surge Protection The NanoStation AC and NanoStation AC loco feature enhanced protection against ESD events. Now with airOS®8 airOS®8 provides powerful features, including airMAX® ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.
QNAP TL-D400S. Toote tüüp: HDD/SSD ümbris. Toetatud ketaste arv: 4, Ketta suurus: 2.5/3.5", Kõvaketta ühenduse tüüp: Jada ATA II, Jada ATA III. Andmeedastuskiirus: 6 Gbit/s. Käigultvahetus. Toote värv: Must, Hall
RayAIM-DH1 is an alignment and aiming attachment for the nRAY. Use it to attach a scope of your choice for even greater precision and easier installation of the Wireless Wire nRAY.
QNAP TS-432PXU-RP. Toetatud ketaste tüübid: HDD & SSD, Kõvaketta ühenduse tüüp: Jada ATA II, Jada ATA III, Toetatud ketaste suurused: 2.5,3.5". Protsessori perekond: Annapurna Labs, Protsessori tootja: Annapurna Labs, ...
Schneller WLAN-Repeater, bis zu 2x 2.400 MBit/s (5 GHz) und 1x 1.200 Mbit/s (2,4 GHz), Mesh-fähig, 802.11a/g/n/ac/ax, 1x 2,5-GBit-LAN und 1x Gbit-LAN, WPA2 und WPS
Bluetooth 5.0 Nano USB Adapter - Bluetooth 5.0 – Applies the latest Bluetooth 5.0 technology, backward compatible with Bluetooth V4.0/3.0/2.1/2.0/1.1 - Wireless Connectivity – Provides stable and convenient communication between Bluetooth devices and your PC or laptop - Nano-Sized – Ultra-small for convenient portability with reliable high performance - Supported Operating Systems – Windows 11/10/8.1/7 Type Adapter Bluetooth 5.0
MikroTik Cloud Router Switch CSS610-8P-2S+IN No Wi-Fi, Router Switch, Rack Mountable, 10/100/1000 Mbit/s, Ethernet LAN (RJ-45) ports 8, Mesh Support No, MU-MiMO No, No mobile broadband, SFP+ ports quantity 2
TL-SG105PP-M2 5-Port 2.5G Desktop Switch with 4-Port PoE++ - 5× 10 Mbps/100 Mbps/1 Gbps/2.5 Gbps RJ45 ports - With four PoE++ ports, transfers data and power on one single cable - Works with IEEE 802.3af/at/bt type3 compliant PDs - 802.1p/DSCP QoS enable smooth latency-sensitive traffic - Supports PoE Power up to 60 W for each PoE++ port - Supports PoE Power up to 123 W for all PoE ports - PoE Auto Recovery guarantees stable operation of PoE devices by automatically rebooting the dropped or unresponsive PD devices - Plug and Play, no configuration and installation required
With a passive twin-ax cable assembly of 3 meters and two SFP+ connectors on each side, TL-SM5220-3M is suitable for short distances and offers a cost-effective way to connect within racks and across adjacent racks.
Description This high-quality heat shrink tube set by Delock is used to protect and to insulate cables, electrical tubes or wires. Under the effect of heat, the sleeve completely encloses the cable and shrinks. This protects the cable from the effects of the influence of weather and mechanical damage. Choice of different sizes and shrink rates This set contains hoses with four different diameters, two different lengths, two different colors and two different shrink rates that can be used in many different ways. Practical storage box The handy box is ideal for protecting the shrink tubes, keeping it free of dirt and dust. The box can also be reused to store various tool accessories, such as screws, nuts, etc. Multifunctional application The heat shrink tubes can be used e.g. in a workshop, at home or in the industry. Application of shrink tubes The heat shrink tube can be heated with a hot air gun, the hose shrinks to half its original diameter when heated at a 2:1 shrinkage ratio and to a quarter of its original diameter at a 4:1 shrinkage ratio. Specification • Content: Shrinkage ratio 2:1: 100 x diameter 3.0 mm red, length: ca. 50 mm 100 x diameter 3.0 mm black, length: ca. 50 mm 50 x diameter 6.0 mm red, length: ca. 50 mm 50 x diameter 6.0 mm black, length: ca. 50 mm 60 x diameter 13.0 mm red, length: ca. 50 mm 60 x diameter 13.0 mm black, length: ca. 50 mm 30 x diameter 25.0 mm red, length: ca. 50 mm 30 x diameter 25.0 mm black, length: ca. 50 mm Shrinkage ratio 4:1: 20 x diameter 25.0 mm red, length: ca. 100 mm 20 x diameter 25.0 mm black, length: ca. 100 mm • Shrinking temperature: 70 °C ~ 125 °C • Material: polyethylene • Box dimensions (LxWxH): ca. 300 x 200 x 63 mm Package content • Heat shrink tube box Package • Box
The effective connection distance is 100 meters on Cat5e/Cat6 cable. The solution is small but very effective. The DN-95132 is an active indoor PoE midspan injector power supply designed specifically for complex backhaul and networking applications. Provides 52 V DC, 0.58 A power for external devices requiring PD power through 2 pairs of output sockets. The solution supports both 10/100 Base-T and Gigabit compatible devices. The solution works with devices that support PD PoE with a power of 30 W, such as wireless access points, WLAN routers, network cameras, IP phones, radio devices and other end devices compatible with power over Ethernet. The solution is fully compliant with the PoE IEEE802.3af standard. The device has a plastic housing protected against fire with a protection level of IP40. The solution supports a wide input voltage range of 100-240 V AC, 50 or 60 Hz. It has a detection chip inside that recognizes and classifies a power-demanding device (PD) before power is supplied to that device. Provides power only when a device supporting the PD (Power Delivery) standard is detected. provides 52 V DC, 0.58 A power for external devices requiring PD power through 2 pairs of output sockets support for both 10/100 Base-T and Gigabit compatible devices the solution supports a wide input voltage range of 100-240 V AC, 50 or 60 Hz Easy-to-use combination of power and data cables in one cable Each output port offers output current limit function, short circuit protection, full powered device detection and classification (PD) Injector can be used regardless of the operating system
The 802.3bt injector from DIGITUS offers an 85 watt PoE port as a midspan solution. Compact, cost-effective and fully IEEE802.3bt-compliant. The simple solution for remote power supply of wireless access points, IP security camera, VoIP phones, thin clients and other installations with PoE functionality.
Tooteandmed on täiendamisel ja tõlkimisel. Kui vajate toote osas täiendavat infot või võõrkeelse teksti mõistmisel abi, andke sellest palun teada e-posti teel abi@onoff.ee. Saadame teile vastuse esimesel võimalusel. Vabandame võimalike ebamugavuste pärast!
CS4228-24GT-375 28-Port Cloud Managed Desktop Gigabit Switch with 24-Port PoE > Meets the requirements of IEEE802.3,IEEE802.3u,IEEE802.3x,IEEE802.3ab,IEEE802.3z standards. > Meets the requirements of IEEE802.3af, IEEE802.3at, Hi-PoE, and IEEE802.3bt power supply standards. > Manages PoE power consumption and PoE power on/off. Supports Intelligent PoE. > A wide operating temperature range and a full metal casing that is fully-enclosed and dust-proof.
With a passive twin-ax cable assembly of 1 meter and two SFP+ connectors on each side, TL-SM5220-1M is suitable for short distances and offers a cost-effective way to connect within racks and across adjacent racks.
Die NETGEAR Gigabit Unmanaged Switch-Serie unterstützt Unternehmen dabei, das Netzwerk kostengünstig auf Gigabit-Geschwindigkeiten und höhere Portzahlen auszuweiten. Der GS524 ergänzt die Serie und bietet 24 Gigabit Ports. Der GS524 ist energieeffizient, auf lange Lebensdauer ausgelegt und wird intensiv getestet, um die Zuverlässigkeit zu bieten, die das Unternehmen benötigt. Priorisierung des 802.1p-Datenverkehrs und Jumbo Frame Support gestatten die nahtlose Integration in komplexere Netzwerke.
TL-SG1210MPE 10-Port Gigabit Easy Smart Switch with 8-Port PoE+ - 9× gigabit RJ45 ports and 1× combo gigabit SFP/RJ45 port - Equipped with eight 802.3af/at PoE+ ports with up to 30 W for each port, the switch can transfer data and power via one single cable - Supports PoE power up to 123 W for all PoE ports* - Provides network monitoring, traffic prioritization, VLAN features, and PoE Auto Recovery - Simple network set-up on top of plug-and-play connectivity - Web-based user interface and Easy Smart Configuration Utility simplify configuration - Fanless design lowers energy consumption and eliminates operating noise
MS106LP 6-Port 10/100Mbps Desktop Switch with 4-Port PoE+ 6 Ports: 6× 10/100 Mbps RJ45 ports with 4 PoE+ ports Two Cables in One: With four PoE+ ports, transfers data and power on one single cable High Power PoE+: Support PoE Power up to 30 W for each PoE port and 40 W for all PoE ports 2× Uplink Ports: MS106LP provides 2× uplink ports when turning on the isolation mode. One for connecting to the Internet and one for connecting to the NVR. Long-Range up to 250 m: Increases PoE transmission distance to 250 m by Extend Mode Isolation Mode: One click to divide traffic for specific ports for stability and security Compliant with Powered Devices: Works with IEEE 802.3af/at compliant PDs Durable Metal Casing: Allows for efficient heat dissipation and long network life Plug and Play: Simple to use and saves time and effort PoE Auto Recovery: Automatically reboots your dropped or unresponsive PoE-powered devices
Discover the Ubiquiti UniFi network cable, engineered for performance and durability in outdoor environments. This CAT 5e patch cable is designed with a rugged, weather-resistant Thermoplastic elastomer (TPE) jacket to withstand harsh conditions, ensuring your network remains operational in any weather. The 24 AWG stranded copper conductor, combined with shielded connectors and foil shielding material, provides protection against electromagnetic interference, offering a stable and secure connection. Additionally, the cable features an ESD drain wire to safeguard against electrostatic discharge, enhancing its reliability. With compliance to key standards such as ISO/IEC 11801, TIA/EIA-568-B.2, and VW-1, this patch cable is a testament to Ubiquiti's commitment to quality and performance. Whether for professional or personal use, the Ubiquiti UniFi network cable is the perfect solution for extending your network outdoors.
