Sporting a sleek industrial design, the U Fiber WiFi is a robust, high‑performance GPON CPE that features an informational LED display with 4 Ethernet ports and WiFi. Features: High-Performance GPON CPELED diodes for easy diagnosticsUp to 2.4 Gbps Downstream and 1.2 Gbps UpstreamSupports up to 20 km GPON LinksPowerful Layer 2/3 Management FeaturesGPON WAN Port4x RJ45 Gigabit LAN PortSC/APC Fiber Connector802.11n Wi‑Fi Status LEDs The easy-to-read LEDs provide status information: Ethernet connection, signal strength, and power.Versatile Power The 4 Ethernet LAN ports support 10/100/1000 Mbps connections. The UFiber WiFi can be powered using 24V passive PoE on Port 1, or by 24VDC. Designed for Integration Up to 128 UFiber WiFi devices can be connected to a single GPON port. Supporting GPON links of up to 20 km, the UFiber WiFi integrates with the UFiber OLT and third-party OLT devices.
5m SFP+ 10Gbps Active Optics direct attach cable. This is highly cost-effective way to connect two SFP/SFP+ devices for very short distances, within racks and across adjacent racks. It works with all our products with SFP/SFP+ ports, including new RB4011 series (RB4011 series are not compatible with our passive direct attach cables S+DA0001 and S+DA0003)
Universal 2in1 crimping tool and cable testerThis professional crimping & testing tool is designed for RJ45 and RJ11 plugs; has a twisted-pair tester built into the cradle's handles to disconnect one part of the tester from the crimper;Prowered by 4xLR44 batteries - not included;Technical data:enables clamping of modular plugs:RJ45 - 8p8cRJ11 - 6p2cRJ12 - 6p6cRJ14 - 6p4cknives for cutting wiresknives for removing external insulation (flat cables)
Lanberg’s crimping tool for pass-through RJ45 is an essential product intended for any installer, who has, on a daily basis, contact with the ICT and telecommunications network wiring. This device (with its double arms) can be used for crimping all kinds of cable connectors such as RJ-11, RJ-12 and RJ-45 and RJ-45 pass through. On top of that, this convenient tool has a built-in additional insulation stripper intended. Due to the special ratchet mechanism, insufficient pressure placed connectors can be prevented. All in all, this tool’s simplicity and multi-functionality of this device, allows it to meet the expectations of both amateurs and professional, when it comes to crimping network cable connectors.
USW-Flex-UtilityFlex Switch Adapter Kit for Street Light Pole Applications.The USW Flex Utility is an outdoor weatherproof enclosure designed for use with the UniFi Switch Flex, USW-Flex. It includes an Ethernet patch cable and a 60W PoE adapter, which provides a maximum PoE budget of 46W. The USW Flex Utility can be easily mounted on a pole, provides clean cable management and screw lock for security. Note: UniFi Switch Flex, USW-Flex, sold separately
Quick-MountToolless Quick-Mounts for Ubiquiti CPE Products.Designed for additional mounting flexibility and device alignment options, the Quick-Mount accessory kit features an easy-to-use, toolless design.Features: No tools required Quick and easy installation Supports NanoStation, NanoStation Loco, and NanoBeam devices Flexible, easy alignment
Powerful Dual LTE Cat 6 router is designed for mission critical applications. Two simultaneously operational LTE CAT 6 modems can provide speeds up to 600 Mbps with load balancing feature. This makes this device irreplaceable in applications where loosing connection is not an option. Two LTE modules working simultaneously can provide speeds up to 600 Mbps Instant failover switching 5 x Gigabit Ethernet with speeds up to 1000 Mbps Wave-2 802.11ac Dual Band WiFi with speeds up to 867 Mbps Teltonika Remote Management System compatible Easy to use, secure and feature rich OpenWrt based Operating System
D-Link AC1200. Maximum data transfer rate (2.4 GHz): 300 Mbit/s, Maximum data transfer rate (5 GHz): 867 Mbit/s, Ethernet LAN-i andmeedastuskiirused: 10,100,1000 Mbit/s. WAN-ühendus: Ethernet (RJ-45). Paigutus: Post, Toote värv: ...
The GPEN21 is a smart power injector that serves as an advanced software controlled repeater. Not only can it power your uplink devices via PoE it can also provide a range of useful software features: Interface management and monitoring GPEN link fault detection VLAN support SNMP reporting Basic traffic shaping GPEN21 has an Ethernet and SFP port for fiber connectivity. Customers can choose to use GPEN21 to power optical module for uplink to provider or to provide PoE to power Ethernet uplink to provider (that uses Mikrotik GPeR and/or netPower products) The GPEN unit can be securely attached to a wall or the communications cabinet. The Ethernet cable can be routed either directly through its bottom cable opening or into the wall as preferred.
Industrial-grade Ethernet cable that protects your network from elemental and electrostatic damage.The UISP-Cable-Pro is a Category 5e cable with a highly insulating weatherproof jacket that prevents damage from rain snow and other extreme climatic conditions. The cable is also fortified with internal foil shielding and a drain wire that collectively shield it from electrostatic discharge (ESD) and allow it to maintain Gigabit Ethernet link rates even when electromagnetic interference is present.
The dual port QXG-10G2T-X710 is a PCIe Gen 3 (compatible with PCIe Gen 2)10GbE network expansion card with an Intel Ethernet Controller X710 and supports up to five speeds (10G / 5G / 2.5G / 1G / 100M). By using Port Trunking, both ports can be combined to achieve up to 20Gbps transfer speeds for accelerating file sharing and intensive data transfer. With SR-IOV and iSCSI support, the QXG-10G2T-X710 greatly boosts network efficiency and is ideal for I/O-intensive and latency-sensitive virtualization applications and data centers.
00/100Mbps Downstream / upstream, high Performance Ethernet over VDSL Solution PLANET VC-231 is an Ethernet-over-VDSL2 Converter with high performance. It is designed based on two core networking technology, Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VDSL2 technology offers absolutely fastest data transmission speed over existing copper telephone lines without the need of rewiring. The VC-231 supports ultra-high performance to the pervasive telephone line network with up to 100/100Mbps symmetric data rate within 300m and 50/2Mbps for 1.4km long range connections. Implementing with Existing Telephone Copper Wires The VC-231 is also a Long Reach Ethernet (LRE) converter providing one RJ-45 Ethernet port and one RJ-11 phone jack that is for VDSL2 connection. By using the additional Splitter from package of VC-231, the splitter can provide POTS splitter to share the existing phone line with POTS; therefore it is no need of replacing the existing copper wiring. Just plug the VC-231 with additional splitter into the existing RJ-11 telephone jack and a high-performance VDSL2 network can be connected. The VC-231 is ideal to be used as an Ethernet extender to an existing Ethernet network. Delivering High-Demand Service Connectivity for ISP / Triple Play Devices The VC-231 provides excellent bandwidth to satisfy the triple play devices for home entertainment and communication. With the capability of 100/100Mbps symmetric data transmission, the VC-231 enables many multi-media services to work on the local Internet, such as VOD (Video on Demand), Voice over IP, Video phone, IPTV, Internet caching server, distance education, and so on. Easy & Flexible Installation The Ethernet-over-VDSL2 Converter comes with a plug-and-play design and is fully compatible with all kinds of network protocols. Moreover, the operating status of each individual port and the whole system can be watched via the rich diagnostic LEDs on the front panel. The VC-231 offers two modes, CPE and CO, for application: CPE mode is used at client side and CO mode is at central side. The CPE or CO mode can be adjusted by using a built-in DIP switch. For point-to-point connection, a CPE mode VC-231 and a CO mode VC-231 must be setup as one pair of converters to perform the connection. Providing Superior Upstream and Downstream Transmission Performance The VC-231 also defines symmetric band plan for the transmission of upstream and downstream signals, the band plan performs higher transmission quality in short range for central side (CO) in symmetric mode. In all, when the VC-231 is in profile 17a operation mode, it provides long distance transmit with Ultra-high performance to the pervasive telephone line network, and when the VC-231 is in 30a operation mode, it gives short distance transmits with upstream and downstream transmission giving wire speed performance. Ethernet Distance Extension Two VC-231 acting as a standalone pair is good for Ethernet distance extension over existing telephone wires. With just one pair of AWG-24 copper wire, you can easily connect two Ethernet networks together with the data rate of maximum 100/100Mbps. With the additional splitter, the telephone service can still be used while the VC-231 CO/CPE is in operation. The two solutions listed below are typical applications for the Ethernet over VDSL2 Converter. MTU / MDU / Hospitality Solution The VC-231 is a perfect solution to quickly providing cost-effective yet high speed network services to multi-unit buildings such as residential buildings (multi-dwelling units), commercial (multi-tenant units) buildings, hotels or hospitals. By utilizing the existing telephony infrastructure, network installation is straightforward and requires no new wiring. With up to 100/100Mbps transmission, Video on Demand, IP telephony and various broadband services can be easily provided. Last Mile of FTTx Deployment The VC-231 is an ideal solution for FTTx (Fiber to the Building, Fiber to the Campus or Fiber to the Node) applications. It supports high bandwidth VDSL2 over existing telephone wires in the “last mile” from the ISP / Telecom / Service provider’s fiber node to the buildings and customers' houses. The 10/100Mbps port of the VC-231 can be directly connected to a PC or to Ethernet devices such as Ethernet Switches or Broadband Routers. It is excellent for phone line network built under Internet because every room or house can use the existing phone line to transmit data through the Internet and the whole building can share the Internet to the wider area network at a minimum cost.
60 GHz PtMP station powered by Wave Technology. Max. link range: — Wave AP: 8 km — Wave AP Micro: 6 km Max. throughput: 2 Gbps (1 Gbps duplex) 5 GHz weatherproof backup radio (Max. throughput: 800 Mbps) (1) GbE RJ45 port Precision alignment mount Integrated GPS & Bluetooth
