Operating relative humidity range, % 5 - 95 Redundant power supply (RPS) support Yes Link aggregation Static trunk or dynamic (LACP) Power over Ethernet (PoE), W 240 Auto MDI/MDI-X Yes Safety IP and MAC-based access control, ACL, 802.1X (port-base), Guest VLAN, Port Security, MAC Address limit, RADIUS/TACACS+, SSL, Management VLAN MAC address filtering Yes 10G support No Networking standards IEEE 802.3, IEEE 802.3u, IEEE 802.3ab,IEEE 802.3z, IEEE 802.3af, IEEE 802.3at, IEEE 802.1p Maximum data transfer rate, Gbit/s 17.86 SFP+ slots quantity 4 Ethernet LAN (RJ-45) PoE ports quantity 8 Management protocols SNMP (v1, v2c, v3), ICMP echo reply, Syslog, Ethernet copper connection MIB support RFC 2233 IF MIB, RFC1213 MIB II, RFC 1757 RMON 1, 2, 3, 9, RFC1215 generic traps, RFC1493 bridge, Private MIB, RFC 2674 Q-Bridge MIB, LLDP-MIB, LLDP-EXT-MED MIB Storage temperature range (T-T), °C -40 - 70 °C SSH/SSL support Yes MAC address table, entries 16000 Switch layer L2/3 Operating temperature range (T-T), °C 0 - 50 °C DHCP server Yes Port mirroring Yes Power consumption, W 44.5 Jumbo Frames support Yes Switching capacity, Gbit/s 128 Quality of Service (QoS) support Yes IGMP snooping Yes Supported data transfer rates 10/100/1000 Mbps Broadcast storm control Yes Weight, g 1450 Power over Ethernet (PoE) Support Yes Switch type Managed Dimensions W x D x H, mm 77 x 127.3 x 15 Ports quantity 12
Using airMAX ac technology, the IsoStation 5AC supports up to 450+ Mbps real TCP/IP throughput. It also offers the following features:Interchangeable horn antennas for enhanced beam shapingHorn feed comes directly from the radio input/output so connectors are eliminatedSingle button release for ease of changing antennasAll metal, shielded radio baseMetal strap for quick pole-mountingThe IsoStation 5AC comes with a 45° isolation antenna. Ubiquiti offer three optional antennas with precise radiation angles for specific beam shaping, so you can customize the IsoStation 5AC for your specific installation requirements:30°60°90°All horn antennas are optimized for co-location. The asymmetrical versions (60° and 90°) narrow the elevation pattern to increase gain where users need it.
LDF 5 The LDF (Lite Dish Feed) is an outdoor wireless system with a built in antenna, meant to be installed on satellite offset dish antennas. The dish will act as a reflector, amplifying the signal. This means you can use any available satellite TV dish with an offset mount to quickly deploy powerful long range wireless links. The offset mount is universal at 40mm diameter, and the LDF can easily be placed inside it. Since the LDF itself is a tiny little package, it makes shipping and deployment simple and low cost. Using a dish of up to 100cm in diameter, it is possible to obtain antenna amplification of up to 33dBi. The device comes preinstalled with RouterOS and is ready to use. - LDF 5 US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed. - LDF 5 (International) supports 5150MHz-5875MHz range.
The UFiber splitter carries data from a UFiber OLT’s long-haul cable and shares it with multiple UFiber ONUs. Available with 4, 8, 16, or 32 outputs. PLC Splitters UF-SPLITTER-4 UF-SPLITTER-8 UF-SPLITTER-16 UF-SPLITTER-32 Input (1) SC/APC (1) SC/APC (1) SC/APC (1) SC/APC Outputs (4) SC/APC (8) SC/APC (16) SC/APC (32) SC/APC Insertion Loss with Connectors 7.4 dB 10.5 dB 13.7 dB 17.0 dB Uniformity Loss 0.6 dB 0.8 dB 1.2 dB 1.5 dB Polarization Dependent Loss 0.3 dB 0.3 dB 0.3 dB 0.3 dB Wavelength Bandwidth 1260-1650 nm 1260-1650 nm 1260-1650 nm 1260-1650 nm Return Loss (All Ports) 50 dB 50 dB 50 dB 50 dB Directivity 55 dB 55 dB 55 dB 55 dB Fiber Type G657A1 G657A1 G657A1 G657A1 Operating Temperature -40 to 85° C (-40 to 185° F) -40 to 85° C (-40 to 185° F) -40 to 85° C (-40 to 185° F) -40 to 85° C (-40 to 185° F) Total Length 4.06m (13.32') 4.06 m (13.32') 4.06 m (13.32') 4.08 m (13.39') Weight 58 g (2.0 oz) 62 g (2.2 oz) 110 g (3.9 oz) 160 g (5.6 oz)
XQ+31LC02D A QSFP28 module for distances up to 2km in your 100 Gigabit setups. 1271, 1291, 1311, 1331 nm The MikroTik 100 Gigabit product line keeps growing! Add this QSFP module for distances up to 2km to your CCR2216 or CRS504 setups and enjoy real speed and ultimate reliability. This optical module offers four independent full-duplex channels with up to 25 Gbps per channel bandwidth and an aggregate bandwidth of 100 Gbps. The module has built-in digital diagnostic functions, including optical power monitoring, and will perform well in environments up to 70° C. It has been designed to meet the harshest conditions, including temperature, humidity, and EMI interference, so we definitely recommend this as a reliable solution for all your 100 Gbps QSFP28 devices.
Unmanaged Gigabit Ethernet Switches (GS108X) 8-port unmanaged Gigabit Ethernet switch with one dedicated 10G SFP+ port 8 Gigabit Ethernet ports 1 x 10G SFP+ Fiber port Energy-efficient Ethernet for maximum power savings Fanless and quiet Desktop or wall-mountable PLUG-AND-PLAY Simple setup with no software to install or configure FULL PERFORMANCE Non-blocking switching architecture delivers maximum wired network throughput QUIET OPERATION Fanless operation means no additional noise - ideal for environments where silence is a priority ENERGY EFFICIENT Designed to optimize power consumption and reduce operating costs METAL HOUSING Rugged and durable housing provides long-lasting durability performance VERSATILE MOUNTING OPTIONS Desktop and wall mountable with included wall mount kit
Neljast konksuga testriotsikust koosnev komplekt (kaks punast ja kaks halli). Ühildub VPS100, VPS101, VPS121 ja kõigi VPS200 seeria sondidega
Original part number PP6U-2M/BK Product name Gembird UTP Cat6 Patch cord, 2 m, black Producer Gembird Class of product Patchcord network cable Wiring type CAT6 Length 2 m Category 6 Coating type PVC - polyvinyl chloride Plug 1 type 1 x RJ45 Plug 2 type 1 x RJ45 Cross-Over No Colour Black
Tootja: Lanberg Tootegrupp: Complete outlet Type of ühenduspesa: 1 x RJ45 ports: 1 Wiring type: UTP - unschielded twisted pair kaabel, 4 pairs, CAT5E Category: 5e kasutusvaldkond: on wall/surface mounted Lisaandmed: Allows connection of conductors 26-22 AWG, universaalne IDC/LSA Ühendusi in accordance koos T568A/B laius: 0 mm kõrgus: 0 mm sügavus: 0 mm Netokaal: 0 kg värv: valge
Ports: 8 x1000Base-T (Ethernet/Fast Ethernet/Gigabit Ethernet) Total Ports: 10 Switching Protocol: Ethernet MAC Address Table Size16K Status LED Indicators: Power, Activity Status, Link, PoE võrguseadeing Compliant Standards10 (RJ-45) sügavus (mm): 104 mm kõrgus (mm): 26 mm laius (mm)177.5 mm Package Type: Retail Maksimum Operating Ambient Temperature10 % Mean Time Between Failures: 50000 hr garantii Products Returnable1kg Pack kaal Netto (kg): 1kg Pieces in pack: 1Box kaal Brutto (kg): 1kg Retail Packaging Netokaal Carton: 1kg Retail Packaging Netokaal Plastic: 1kg Packs in Box: 1
Adapter|PCIE|Number of ports 2 Network Device Type Adapter PCIE Yes Number of ports 2 Shipping box quantity 5 Unit Brutto Volume 0,000819 cubm Unit Net Weight 0,15 kg Unit Gross Weight 0,188 kg
D-Link DUB-E130. Ühenduvustehnoloogia: Juhtmega ühendatud, Hostiliides: USB tüüp-C, Liides: Ethernet. Andmete edastamise maksimaalne määr: 1000 Mbit/s. Toote värv: Valge
Kit for mounting RB5009 devices in 1U rackmounts. With this kit you can mount up to four RB5009UG+S+IN routers in a single 1U rackmount space! No more server-room-Tetris just pure productivity.
This version of our BLE tags comes completely sealed cast in industrial-grade molds to give it a solid IP69k ingress protection rating. In other words this tag is dust-tight — nothing gets in and it is fully protected against close-range high-pressure high-temperature spray downs. Perfect for industrial telemetry systems or to track all kinds of heavy equipment and materials at a construction site.Like the indoor version this tag also supports iBeacon Eddystone and MikroTik telemetry formats. There is an NFC encoded MAC address and optional encryption. Unlike the indoor version the outdoor tag comes with a built-in temperature sensor that can be used for condition monitoring. The ±0.5 °C precision can be very useful in cold supply chain logistics.TG-BT5-OUT features an improved 550 mAh battery that will last around five years (with a sending interval of 1s). It is suitable for strapping to all kinds of surfaces and it can handle a temperature range of -20 °C to 85 °C.
The dual port QXG-10G2T-X710 is a PCIe Gen 3 (compatible with PCIe Gen 2)10GbE network expansion card with an Intel Ethernet Controller X710 and supports up to five speeds (10G / 5G / 2.5G / 1G / 100M). By using Port Trunking, both ports can be combined to achieve up to 20Gbps transfer speeds for accelerating file sharing and intensive data transfer. With SR-IOV and iSCSI support, the QXG-10G2T-X710 greatly boosts network efficiency and is ideal for I/O-intensive and latency-sensitive virtualization applications and data centers.
00/100Mbps Downstream / upstream, high Performance Ethernet over VDSL Solution PLANET VC-231 is an Ethernet-over-VDSL2 Converter with high performance. It is designed based on two core networking technology, Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VDSL2 technology offers absolutely fastest data transmission speed over existing copper telephone lines without the need of rewiring. The VC-231 supports ultra-high performance to the pervasive telephone line network with up to 100/100Mbps symmetric data rate within 300m and 50/2Mbps for 1.4km long range connections. Implementing with Existing Telephone Copper Wires The VC-231 is also a Long Reach Ethernet (LRE) converter providing one RJ-45 Ethernet port and one RJ-11 phone jack that is for VDSL2 connection. By using the additional Splitter from package of VC-231, the splitter can provide POTS splitter to share the existing phone line with POTS; therefore it is no need of replacing the existing copper wiring. Just plug the VC-231 with additional splitter into the existing RJ-11 telephone jack and a high-performance VDSL2 network can be connected. The VC-231 is ideal to be used as an Ethernet extender to an existing Ethernet network. Delivering High-Demand Service Connectivity for ISP / Triple Play Devices The VC-231 provides excellent bandwidth to satisfy the triple play devices for home entertainment and communication. With the capability of 100/100Mbps symmetric data transmission, the VC-231 enables many multi-media services to work on the local Internet, such as VOD (Video on Demand), Voice over IP, Video phone, IPTV, Internet caching server, distance education, and so on. Easy & Flexible Installation The Ethernet-over-VDSL2 Converter comes with a plug-and-play design and is fully compatible with all kinds of network protocols. Moreover, the operating status of each individual port and the whole system can be watched via the rich diagnostic LEDs on the front panel. The VC-231 offers two modes, CPE and CO, for application: CPE mode is used at client side and CO mode is at central side. The CPE or CO mode can be adjusted by using a built-in DIP switch. For point-to-point connection, a CPE mode VC-231 and a CO mode VC-231 must be setup as one pair of converters to perform the connection. Providing Superior Upstream and Downstream Transmission Performance The VC-231 also defines symmetric band plan for the transmission of upstream and downstream signals, the band plan performs higher transmission quality in short range for central side (CO) in symmetric mode. In all, when the VC-231 is in profile 17a operation mode, it provides long distance transmit with Ultra-high performance to the pervasive telephone line network, and when the VC-231 is in 30a operation mode, it gives short distance transmits with upstream and downstream transmission giving wire speed performance. Ethernet Distance Extension Two VC-231 acting as a standalone pair is good for Ethernet distance extension over existing telephone wires. With just one pair of AWG-24 copper wire, you can easily connect two Ethernet networks together with the data rate of maximum 100/100Mbps. With the additional splitter, the telephone service can still be used while the VC-231 CO/CPE is in operation. The two solutions listed below are typical applications for the Ethernet over VDSL2 Converter. MTU / MDU / Hospitality Solution The VC-231 is a perfect solution to quickly providing cost-effective yet high speed network services to multi-unit buildings such as residential buildings (multi-dwelling units), commercial (multi-tenant units) buildings, hotels or hospitals. By utilizing the existing telephony infrastructure, network installation is straightforward and requires no new wiring. With up to 100/100Mbps transmission, Video on Demand, IP telephony and various broadband services can be easily provided. Last Mile of FTTx Deployment The VC-231 is an ideal solution for FTTx (Fiber to the Building, Fiber to the Campus or Fiber to the Node) applications. It supports high bandwidth VDSL2 over existing telephone wires in the “last mile” from the ISP / Telecom / Service provider’s fiber node to the buildings and customers' houses. The 10/100Mbps port of the VC-231 can be directly connected to a PC or to Ethernet devices such as Ethernet Switches or Broadband Routers. It is excellent for phone line network built under Internet because every room or house can use the existing phone line to transmit data through the Internet and the whole building can share the Internet to the wider area network at a minimum cost.
Throughput: 56 Forwarding rate: 41.7 Packet buffer: 4.1 MAC address table size: 8000 Power consumption: 17.32 Mean time between failures (MTBF): 992.594 Weight: 2.15
