Seinakarp annab võimaluse kiudoptilise kaabli ühendamiseks, mis paiknevad korpuses. Võimalus kasutada SC ja LC tüüpi adaptereid, mis annab paindliku lahenduse lõppkasutajale. Funktsionaalne korpus võimaldab paigaldamise ajal hõlpsalt juurdepääsu olemasolevatele kaablitele või kiududele.
Kahe fiiberoptilise pistiku ühendamiseks on vaja adapterit. Adapterid on erinevad nii välimuselt kui ka sisult. Adapterid on simplex, duplex ja Quad versioonina, ning samuti nii plastik kui ka metall korpusega. Ühemooduliste (SM) adapterite ühendustoru materjal on keraamika ja mitmemooduliste (MM) on materjaliks PhBr (fosfor-pronks ). Adapteri mõlemas otsas on kork, sama värviga nagu adapter.
Kahe fiiberoptilise pistiku ühendamiseks on vaja adapterit. Adapterid on erinevad nii välimuselt kui ka sisult. Adapterid on simplex, duplex ja Quad versioonina, ning samuti nii plastik kui ka metall korpusega. Ühemooduliste (SM) adapterite ühendustoru materjal on keraamika ja mitmemooduliste (MM) on materjaliks PhBr (fosfor-pronks ). Adapteri mõlemas otsas on kork, sama värviga nagu adapter.
LTU-LiteIncorporating Ubiquiti’s proprietary LTU technology, the LTU-Lite is a 5 GHz radio with an integrated antenna design for use as a PtMP CPE. LTU technology breaks through the limitations of 802.11 Wi-Fi technology and supports 1024 QAM for superior performance. Channel width flexibility (10/20/30/40/50 MHz) allows independent TX and RX channel frequency configurations anywhere within the radio band to avoid local interference. PtMP CPE 1024 QAM 10/20/30/40/50 MHz channel bandwidth Central configuration management from AP side Frequency split Auto power adjustments Router mode support Functions in a PtMP environment with the LTU-Rocket as the basestation Featuring an integrated antenna, the LTU Lite is a compact, cost-effective subscriber station utilizing the 5 GHz radio band. It functions as a CPE (Customer Premises Equipment) in a Point-to-MultiPoint (PtMP) environment with the LTU Rocket® as the basestation.Proprietary LTU TechnologyBased on Ubiquiti’s LTU technology, the LTU Lite is not impeded by the limitations of standard 802.11 Wi-Fi technology. Its custom LTU silicon and radio architecture provide up to 600+ Mbps (1) of real TCP/IP throughput and modulation rates of up to 4096QAM (2). (1) 1+ Gbps with future firmware upgrade. (2) Available with future firmware upgrade.CPE ModesThe LTU Lite supports both bridged and built-in hardware NAT router modes to suit your specific deployment.Frequency SplitThe LTU Lite can use different frequencies for TX and RX to avoid interference.Convenient Mount OptionsThe LTU Lite is designed for quick yet reliable mounting on a pole or on a wall. All necessary mounting hardware is included.
TwistPort Adaptor for ePMPIntegrates ePMP connectorized radios into TwistPort eco-system. What is TwistPort AdaptorTwistPort Adaptor converts 3rd party radio coaxial interface into RF elements® proprietary TwistPort waveguide connector. Integration of the radio is smooth and requires no tools. Making 3rd party radios compatible with TwistPort enables using the radio with any TwistPort antenna ever made with superior performance, noise immunity and network scalability. Designed For ePMPTwistPort Adaptor for ePMP is compatible with Cambium Networks ePMP 1000 AP/CSM, ePMP Force 300 CSM and ePMP 3000L AP. Market Leading PerformanceTwistPort Adaptors cover an ultra-wideband spectrum of 5180-6400 MHz and perform with superb efficiency and great VSWR.
ePMP MP 3000 MicroPOP Access PointThe ePMP MP 3000 is Cambium Networks' MicroPOP solution for WISP's and Enterprise network operators. The MicroPOP MP3000, part of the ePMP portfolio, solves the need for injecting additional capacity where it is needed most as well as extending network coverage in a cost-effective, light-weight manner. For example, a WISP can expand coverage to a new sub-division or area of a village that wasn't previously reachable by the core ePMP network. Additionally, a WISP or enterprise operator may need to inject additional capacity to a small campus or enclave of buildings. The MP 3000 along with ePMP Subscriber Modules can also serve as a distribution network for wi-fi access points.The MicroPOP MP 3000 is based on 802.11ac Wave 2 technology and can interoperate with any combination of up to 64 of the ePMP Force 300 series of subscriber modules (including Force 300-13, -13L, -16, -19, -19R and -25) as well as the Force 180/190/200 with backwards compatibility. Capacities of up to 600 Mbps are achievable with a range typically of one mile or 1.5 kilometers. The MP 3000 features an integrated omni antenna in a ruggedized IP67 enclosure.MicroPOP Applications: Extend Coverage Areas: deploy the MP 3000 in places unreachable by the main tower or to add adjacent coverage for new subscribers with lower overall density Inject New Capacity: deploy the MP 3000 to a set of customers demanding especially high capacity services Backhaul for Outdoor Wi-Fi Access Points: deploy the MP 3000 and ePMP Subscriber modules to create a hub-and-spoke backhaul for multiple wi-fi access points. Key Specifications: 2X2 MIMO support with peak throughput of 600 Mbps 256QAM-5/6, 80 MHz support Supports a wide frequency range: 4910 to 5950 MHz Supports up to 64 subscriber modules Integrated 9 dBi Dual-Polarity Omni-directional antenna Cloud or on-premises network management with cnMaestro NOTE: the MP 3000 does not support GPS synchronization and does not have an integrated real-time spectrum analyzer.
Teltonika FMC001LTE/GNSS/BLE plug and play OBD trackerTeltonika FMC001 represents next step in communication technology – this is the first Plug and Track LTE OBD device with GNSS and Bluetooth connectivity. Possibility to read OBD II parameters effortless installation and detailed accelerometer data provides a compelling solution. This is perfect tracker for a wide range of applications – fleet management of light commercial vehicles car rental & leasing driver log-book insurance telematics (UBI) and so on. Device supports various Bluetooth Low Energy sensors beacons firmware and configuration update via Bluetooth.
A heavy-duty 2.4GHz access point with extra miniPCI slot three SIM slots GNSS support (GPS GLONASS BeiDou Galileo) and LTE modem for International bands 1 2 3 7 8 20 38 and 40 The LtAP LTE kit is a compact weatherproof wireless access point with a built in cellular modem that supports 4G (LTE) connectivity.Connect to the LtAP’s built-in high power 2.4 GHz 802.11b/g/n wireless and access the LTE network from your phone or any other wireless device. The LtAP LTE kit also has one Gigabit Ethernet LAN port for wired devices. The RS232 serial port gives you console access for debugging.• 2.4 GHz AP in a rugged case• LTE installed in miniPCIe slot• Second miniPCIe slot for expansions• Three Mini SIM slots• Gigabit Ethernet port• Built-in GPS• Many powering options (DC jack POE-in automotive)• Serial port and full size USB for other devices• Perfect for cars or outdoor mobile applications The unit comes with two miniPCIe slots (one already populated with LTE modem) offering many expansion options. For example you can install second LTE modem for redundancy or 5 GHz interface to have dual concurrent 2.4 GHz / 5G hz AP + LTE. Unit is powered by Dual-Core 880 MHz CPU and 128 MB RAM to deal with heavy loads.LtAP has a special enclosure with a wall mounting kit three miniSIM slots to alternate between cellular providers and integrated GNSS support (GPS GLONASS BeiDou Galileo) making this a perfect device for use in moving vehicles like cars buses or trains. External GPS antenna is available for ordering separately (not included product code ACGPSA).The LTE card is connected to two internal antennas with u.FL connectors so if you want you can unplug the connectors and add your own external LTE antenna for better coverage. The unit has several powering options: 12-30 V PoE-in by Ethernet port DC jack and automotive connector.Use the built in GPS module to track the location of your vehicle in real time we have even provided a simple tracking application example in the RouterOS documentation to help you start development of your platform. Three models are available: • LtAP LTE kit (RBLtAP-2HnD&R11e-LTE) with R11e-LTE modem for International bands 1 2 3 7 8 20 38 and 40.• LtAP 4G kit (RBLtAP-2HnD&R11e-4G) with R11e-4G modem for International / USA bands 3 7 20 31 41n 42 and 43.• LtAP (RBLtAP-2HnD) without LTE card. Included parts
Teltonika MSP500Special GNSS/GSM/Bluetooth tracker with speed limiting functionalityMSP500 is a special tracking terminal with GNSS/GSM/Bluetooth connectivity internal GNSS/GSM antennas RS232 interface and internal Ni-Mh battery. Device was designed for speed limiting control.Speed limitingMoreover device contains integrated buzzer and relay for a speed limiting functionality based on a fuel pump power supply switching or accelerator pedal control using additional electronic throttle controller.
Seinakarp annab võimaluse kiudoptilise kaabli ühendamiseks, mis paiknevad korpuses. Võimalus kasutada SC ja LC tüüpi adaptereid, mis annab paindliku lahenduse lõppkasutajale. Funktsionaalne korpus võimaldab paigaldamise ajal hõlpsalt juurdepääsu olemasolevatele kaablitele või kiududele.
