We are now offering a Hot Swap -48V DC telecom power supply (product code PW48V-12V150W), available to purchase separately for use with CCR1072. Simply remove one of the current power supplies and replace with the new PW48V-12V150W for -48V installations - simple and easy. You don't even need to turn off the device.
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 0.5 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: roheline
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 0.5 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: Red
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 0.25 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: sinine
Deploy the UniFi XG AP in very high-density environments requiring maximum wireless performance. The UniFi XG AP features simultaneous dual-band 4x4 MU-MIMO technology and convenient 802.3bt PoE compatibility.10G and 1G Ethernet Connectivity Designed to be a 10G Ethernet backhaul the primary port carries both data and PoE while the secondary Gigabit Ethernet port is for bridging and also supports PoE input.Features: 10 Gigabit Ethernet Support4x4 MU-MIMO Quad-Radio: (3) client 1 SecurityDual 5 GHz 802.11ac Wave 2 Radios3.466 Gbps Combined Radio Rate in 5 GHz800 Mbps Radio Rate in 2.4 GHzDedicated Security Radio with Persistent Threat Management1 500 Client Association Limit
Schutzkontakt-Steckdosenleiste, mit sechs Anschlüssen, erhöhter Berührungsschutz, beleuchteter Fußschalter mit 1,5 m langer Steuerleitung, 2x permanente Steckdosen, 4x schaltbare Steckdosen, Stecksystem DE (Stecker-Typ F)
This outdoor wireless system with a built-in antenna can provide a connection even in the most remote locations. Tiny powerful can be used with any satellite TV dish with an offset mount.LDF LTE6 kit is a device for extremely remote locations that are within cellular network coverage. Attach it to any satellite TV dish (NOT included) and the dish will act as a reflector greatly amplifying the signal.Using large enough dishes it is possible to obtain antenna amplification of 30 dBi or more. That means – Internet connectivity is possible even in areas where you would usually have no mobile connectivity at all. Stormy weather is not a problem either – with a solid IP68 rating LDF LTE6 kit can withstand dust dirt and sand as well as temporary immersion in water.LDF LTE6 kit features a CAT6 LTE modem which enables carrier aggregation and allows the device to use multiple bands at the same time. A huge advantage when there are a lot of LTE users in the area. It provides better responsiveness and higher efficiency for weaker signal situations in the countryside.Dish is shown for demonstration only and NOT included!
Belkin AVC006btSGY. Hostiliides: USB 3.2 Gen 1 (3.1 Gen 1) Type-C, Jaoturi liidesed: HDMI, USB 3.2 Gen 1 (3.1 Gen 1) Type-A, USB 3.2 Gen 1 (3.1 Gen 1) Type-C, Maksimaalne resolutsioon (HDMI): 3840 x 2160 pikslit. ...
Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-802S40, GT-806S60, GT-805A and GT-806A/B media converters support conversion between 10/100/1000BASE-T and 1000BASE-SX/LX networks. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively. Distance Extension with High Performance and Steady Network Communications PLANET GT-80x gigabit media converter series extends communication distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000BASE-T and 1000BASE-SX/LX interfaces for various fiber optic applications. The available fiber interfaces are shown below: Optic Mode Connector Type Distance Multi-mode Duplex LC/SC 220m/550m/2km Single mode Duplex LC/SC 20/40/60/80/120km Single mode WDM Simplex LC/SC 20/40/60/80km Enhanced Smart Management Features The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Passthrough function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the network. The DIP switch can disable or enable the LFP function. LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the network. Easy Installation The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R/MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T and IEEE 802.3z 1000BASE-LX/SX, the Gigabit media conversion installation is quite quick and easy with its Plug and Play feature. The GT-80x also supports flow control and back pressure in half-duplex mode to eliminate packet loss. Fiber-optic Networking for ISPs, Enterprises, and homes With high performance of data transmission and easy installation, the GT-80x can build the ISP network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for ISPs and FTTBs (Fiber to the Building) for small enterprise network environment.
See Delocki M.2 dokkimisjaam võimaldab paigaldada kaks M.2 PCIe NVMe SSD-d ja seda saab ühendada USB kaudu arvutiga või sülearvutiga. Kaasasolev USB-kaabel võimaldab ühendamist vabasse USB-C™-porti. M.2 PCIe SSD kloonimise funktsioon Kloonimisfunktsioon võimaldab kopeerida ühe SSD sisu teisele ilma arvutit kasutamata. Ideaalne testimisvahend Mälu ühendatakse lihtsalt vastupidavasse korpusesse ja seda saab kohe kasutada. Ei ole vaja kruvisid, tööriistu ega lisaseadmeid, mis tähendab, et SSD-d saab kiiresti vahetada. Spetsifikatsioon - Ühendused: 1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) USB Type-C™ emane 2 x 67-pinniline M.2 võtme M pesa 1 x USB Type-C™ female (toiteallikas) - Kiibistik: Asmedia ASM2362 - Toetab M.2-mooduleid M- või B+M-klahviga PCIe (NVMe) baasil - Toetab NVM Express (NVMe) - Andmeedastuskiirus kuni 10 Gbps - Toetab UASP - LED-indikaator toite, juurdepääsu ja kopeerimise oleku kohta - Funktsiooniklahv: 1 x kloonimisnupp 1 x sisse/välja lüliti - Mõõtmed (LxSxK): ca. 72 x 79 x 18 mm - Hot Plug, Plug & Play Toiteallika spetsifikatsioon - Seina toiteallikas - Sisend: AC 100 ~ 240 V / 50 ~ 60 Hz / 0,6 A - Väljund: 5,0 V / 3,0 A Süsteeminõuded - Android 10.0 või uuem - Chrome OS 83.0 või uuem - Linuxi 5.4 või uuem - Mac OS 10.15.6 või uuem - Windows 8.1/8.1-64/10/10-64 - Vaba USB Type-C™ pordiga või vaba Thunderbolt™ 3 pordiga seade Paketi sisu - M.2 dokkimisjaam - Kaabel USB-C™ isane USB-C™ isane, pikkus ca. 45 cm - Kaabel USB-C™ isane USB Type-A isane, pikkus ca. 80 cm (toiteallikas) - Väline toiteallikas - Kasutusjuhend
wAP LR2 kit Our newest out-of-the-box solution for LoRa® technology. Works with the 2.4 GHz frequency for LoRa®. Doesn’t interfere with the 2.4 GHz WLAN signal!
USB Bluetooth v.5.0 dongle - ENJOY THE FREEDOM OF WIRELESS TECHNOLOGY - Large operating distance - Easily connect any Bluetooth device to your PC - Fast & easy file transfer between your PC and mobile devices - Perfect for streaming high quality stereo music - Windows 11 compatible Type Adapter Bluetooth 5.0, Wireless Frequency Range 2.402 - 2.48 GHz
Bluetooth 5.0 Nano USB Adapter - Bluetooth 5.0 – Applies the latest Bluetooth 5.0 technology, backward compatible with Bluetooth V4.0/3.0/2.1/2.0/1.1 - Wireless Connectivity – Provides stable and convenient communication between Bluetooth devices and your PC or laptop - Nano-Sized – Ultra-small for convenient portability with reliable high performance - Supported Operating Systems – Windows 11/10/8.1/7 Type Adapter Bluetooth 5.0
MT48-480095-11DG is 48 V 0.95 A power supply. It's part of Mikrotik GPEN concept that provides all the benefits of GPON but utilizes well-proven simple and inexpensive Ethernet solutions.MT48-480095-11DG allows using long Ethernet cable runs and multiple GPER units - please refer to the table in the last page of GPEN concept brochure.
RMK-2/10 allows installing two of the smaller MikroTik form-factor devices within traditional 19-inch racks, such as our neat and handy SR-10U! Alternatively, you can permanently remove a part of the bracket to install a single 200 mm device into a classic 10-inch rack.
AC1200 OneMesh Wi-Fi Range Extender - Eliminate weak signal areas with whole home WiFi coverage. - 2.4 GHz (300 Mbps) and 5 GHz (867 Mbps) dual-band WiFi connection ensures more stable wireless experience.† - Creates a Mesh network by connecting to a OneMesh router for seamless whole-home coverage.‡ - Adaptive Path Selection – connects to the fastest connection path to the router automatically and runs at top-speed. - High Speed Mode – maximizes speed by using one WiFi band as dedicated backhaul, ideal for HD streaming and gaming. - AP Mode – create a new Wi-Fi access point to enhance your wired network with Wi-Fi capability. - Smart Signal Indicator - helps to find the best location for optimal Wi-Fi coverage by showing the signal strength. - Push the WPS button to easily connect to the router and you can uniformly manage from the Tether app or Web UI. - Works with any Wi-Fi router or wireless access point Range Extender Data transmission speed 1200 Mbps, 1x10/100M Number of antennas 2, Wireless Frequency Range 2.4GHz & 5GHz(11ac) Wireless Transmit Power 30 dBm, Colour White Dimensions 89×35.0×124.1 mm
The Ubiquiti UniFi patch cable is a high-quality networking solution designed to meet the demands of modern indoor environments. With its CAT 6 specification, it supports high-speed data transmission, making it perfect for connecting a wide range of devices. Each cable features male RJ-45 connectors on both ends, ensuring a secure and straightforward connection. Designed specifically for indoor use, this patch cable offers optimal performance and reliability. Furthermore, it complies with TIA/EIA-568-B.2 and VW-1 (UL1581) standards, highlighting its safety and durability. Whether for home or office use, the Ubiquiti UniFi patch cable is an excellent choice for establishing a reliable network.
The HPE Networking Instant On SG1004 is designed to elevate network performance with its robust features. This gateway device supports wired connectivity through four Gigabit Ethernet ports, ensuring swift data transfer rates and reliable network access. With a focus on security, this model offers a secure networking solution suitable for various environments, making it an ideal choice for small to medium-sized networks looking to enhance their infrastructure. With its straightforward setup and efficient management, the SG1004 allows users to establish a strong network foundation effortlessly. The device's simple interface and secure options cater to the needs of businesses seeking to streamline operations while maintaining a reliable connection. Experience seamless networking that meets your requirements.
Vertically and Horizontally AdjustableAvailable now, the Ubiquiti Networks Window/Wall Mounting kit for NanoStation. The kit comes with interchangeable mounting adapters(suction mount for window, wall screws for wall) so the NanoStation can be easily fitted on a window or wall. Vertically and horizontally adjustable.
Ethernet LAN (RJ-45) PoE ports quantity 4 Operating relative humidity range, % 5 - 95 Redundant power supply (RPS) support Yes Auto MDI/MDI-X Yes MAC address filtering Yes 10G support No Networking standards IEEE 802.3, IEEE 802.3u, IEEE 802.3ab,IEEE 802.3z, IEEE 802.3af, IEEE 802.3at, IEEE 802.1p Ventilation fan(s) No Power over Ethernet (PoE), W 120 SFP+ slots quantity 1 Maximum data transfer rate, Gbit/s 7.44 Switch type Unmanaged Ports quantity 5 Storage temperature range (T-T), °C -40 - 70 °C Jumbo Frames support Yes Supported data transfer rates 10/100/1000 Mbps Weight, g 500 Dimensions W x D x H, mm 29.1 x 107.3 x 139 Operating temperature range (T-T), °C 0 - 50 °C Power consumption, W 44.5 Switch layer L2/3 Switching capacity, Gbit/s 128 MAC address table, entries 16000 Power over Ethernet (PoE) Support Yes
