CAT6a SSTP Patch CableAugmented Category 6 or CAT6a Cable is used in network applications such as 10Base-T 100Base-T 1000Base-T 10000Base-T Ethernet up to 100 meters. CAT6a cables have been designed specifically for 10 Gigabit Ethernet applications over copper. They perform at high-data transfer rates and operate at a minimum frequency of 500 MHz. These cables deliver improved performance over standard CAT6 cables.CAT6a is completely backward-compatible with current CAT6 CAT5E and CAT5 equipment. Vention CAT6a Cables are composed of 4 twisted pair 27 AWG stranded copper conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the draft specification ANSI/TIA/EIA-568-B.2-10 standard.Use to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-TX Fast Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cables have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Suppresses ANEXT (Alien Near End Cross Talk) and delivers superior 10 GbE performance up to 100 meters.Performance rated beyond 500 MHz.
Bidirectional SFP+ 10G module kit. Kit contains two SFP+ modules that can be used as pair to achieve operating data rate up to 10Gbps for distances up to 10km on single optical cable.
CAT7 SSTP Patch CableCategory 7/Class F (ISO/IEC 11801) cable specifications require transmission frequencies of up to 600 MHz over 100 meters of fully shielded copper cabling. CAT7 cable consists of four individually shielded pairs inside an overall braided shield also known as Shielded Twisted Pair Cable (SSTP) or S/FTP (Shielded Foil Twisted Pair). CAT7 features even more stringent specifications for crosstalk and system noise than CAT6 and is designed specifically for Gigabit Ethernet applications (Gigabit over copper).Vention CAT7 cables exceed the current ISO/IEC specifications and represent the next generation in Ethernet over copper.Used to connect your network device to any of the following: 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Backwards compatible with CAT5 CAT5e CAT6 and CAT6a equipment.Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel. Complies with TIA/EIA 568B standard.Virtually eliminates alien crosstalk and interference.Performance rated beyond 600 MHz.
CAT7 SSTP Patch CableCategory 7/Class F (ISO/IEC 11801) cable specifications require transmission frequencies of up to 600 MHz over 100 meters of fully shielded copper cabling. CAT7 cable consists of four individually shielded pairs inside an overall braided shield also known as Shielded Twisted Pair Cable (SSTP) or S/FTP (Shielded Foil Twisted Pair). CAT7 features even more stringent specifications for crosstalk and system noise than CAT6 and is designed specifically for Gigabit Ethernet applications (Gigabit over copper).Vention CAT7 cables exceed the current ISO/IEC specifications and represent the next generation in Ethernet over copper.Used to connect your network device to any of the following: 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Backwards compatible with CAT5 CAT5e CAT6 and CAT6a equipment.Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel. Complies with TIA/EIA 568B standard.Virtually eliminates alien crosstalk and interference.Performance rated beyond 600 MHz.
CAT7 Flat Extension Patch CableCategory 7/Class F (ISO/IEC 11801) cable specifications require transmission frequencies of up to 600 MHz over 100 meters of fully shielded copper cabling. CAT7 cable consists of four individually shielded pairs inside an overall braided shield also known as Shielded Twisted Pair Cable (SSTP) or S/FTP (Shielded Foil Twisted Pair). CAT7 features even more stringent specifications for crosstalk and system noise than CAT6 and is designed specifically for Gigabit Ethernet applications (Gigabit over copper).Vention CAT7 Flat Network Extension Cables exceed the current ISO/IEC specifications and represent the next generation in Ethernet over copper. Network Extension Cable are excellent for extending of your LAN connection to your HDTV Blu Ray Player Home Theater XBox 360 PS3 etc. Used for network adapters hubs switches routers DSL/Cable modems patch panels and other twisted-pair applications.Used to connect your network device to any of the following: 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Backwards compatible with CAT5 CAT5e CAT6 and CAT6a equipment.Extension Cables have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Complies with TIA/EIA 568B standard.Virtually eliminates alien crosstalk and interference.Performance rated beyond 600 MHz.
QuPSU P561Passive PoE Power SupplyPoE power supply for QuCam and QuPoE Switch SCA6E. It is dedicated to power through QuCam/QuPoE Switch: 1x Teltonika RUT230/RUT240/RUT900/RUT950/RUT955 4x CCTV cameras with active PoE 802.3af/at Features: Passive PoE Power Supply Output: 56V 1A Input: AC100-240V 0.8A Max 50/60Hz EU power cord CE Caution: Indoor use only
RC10-6U-300GGSTALFLEX's Hanging cabinet is a perfect solution for installation organization and storage of: IT equipment monitoring devices alarm systems TV networks local LAN networks all the other devices in non-standard housings and in any complexed Configuration. The new STALFLEX series of rack cabinets is distinguished by an extremely easy and intuitive assembly which definitely simplifies the installation process and makes them uncompetitive to the alternative products offered by other manufacturers!Functionality of the cabinets combined with solid execution of the STALFLEX's team makes this product ideally suited for protection of delicate devices against external factors and accidental mechanical damage.Brokable cable gland.An unquestionable advantage of STALFLEX rack cabinets is an easy-to-break out plug for cabling in their lower and upper part (each with dimensions: 80 mm x 40 mm +/-1/2 mm).This gives various possibilities for cable entry while ensuring convenient wiring installation and easy correct assembly of any devices.Doors easy to assemble.Additional installation comfort is ensured by the easy-to-install door with the option of choosing (right / left). The doors are closed with a patent lock (in the set with a set of two keys).The depth level of front brackets can be adjusted!In order to ensure maximum freedom in arranging the internal space of the cabinet the two front brackets are connected to its body by means of screws.It is a solution that allows mounting the brackets at one of three depth levels (spacing of the mounting holes every 30 mm).Mounting Holes.Holes in the back of the cabinet allow it to be hung with the use of dowels.Specially designed space for convenient assembly of devices.The interior of the cabinet is designed in such a way that after mounting the shelf with the maximum permissible depth there still is free space inside: about 30 mm in its rear part - developed specifically to facilitate the installation of wiring about 60 mm in its front part - to enable safe insertion of eg Ethernet connectors or fiber optics.An additional advantage of the Stalflex rack cabinet is the lack of a back wall which facilitates free use of its internal space.EASY INSTALLATION!The product is intended for self-assembly. By purchasing this product you get a complete assembly kit with the exact instructions and accessories necessary for proper assemble of the cabinet. Thanks to uncomplicated design Stalflex's rack cabinets are extremely easy fast and intuitive to install. Width 10" Height 6U Depth 300 mm Material powder coated steel Package size 335 x 157 x 345 mm External dimensions 300 x 292 x 300 mm
QuOmni LTE MIMO 2x2Omnidirectional multiband LTE MIMO 2x2 antennaQuOmni LTE omnidirectional MIMO 2x2 LTE antenna is working in Vertical polarization it´s desired for LTE/3G/2G connections. The antenna can be used for the most popular LTE bands (e.g. 3 7 20) frequencies 694-2700 MHz. That antenna is predicted to be installed on the buildings (on the pole or on the wall) as the client antenna or on the moving points like trains buses lorries yachts boats to receive Internet by LTE/3G. It’s compatible with Teltonika: RUT240 RUT900 RUT950 RUT955 RUTX09 RUTX11 and other MIMO 2x2 LTE/3G/2G modems and routers.Cable length: 5m
QuPanel LTE MIMO 4x4Directional multiband LTE MIMO 4x4 antennaQuPanel LTE directional MIMO 4x4 antenna is predicted for 4G LTE high categories from cat 5 up to cat 19. The antenna improves the signal in rural/suburban and locations where the mobile signal is weak. That antenna is predicted to be installed on the buildings (on the pole or on the wall). Due to very wide working frequency range the antenna is universal client for LTE bands like LTE700/800/1800/1900/2100/2300/2600. It’s compatible with all MIMO 4x4 LTE modems and routers working in categories: cat 5 cat 6 cat 7 cat 9 cat 10 cat 11 cat 12 cat 13 cat 15 cat 16 cat 18 cat 19.Cable length: 5m
CAT8 Flat Patch CableVention CAT8 Flat Patch Cables are capable of reaching up to 40Gbps transfer speeds and up to 2000MHz bandwidth. These CAT8 patch cords consist of 4 pairs 30 AWG stranded copper conductors and RJ45 connectors. Cat.8 patch cables are backwards compatible with CAT5E CAT6 CAT6A and CAT7.Used to connect your network device to any of the following: 40GBASE-T Gigabit Ethernet 25GBASE-T Gigabit Ethernet 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet CAT8 Performance for a 10GBASE-T 25GBASE-T or a 40GBASE-T channel compliant network up to 30 meters; 10Gbps support up to 100 meters. Optimize the distance and power in high density networking End of Row (EOR) Top of Rack (TOR) or Middle of Row (MOR) configurations at the data center. CAT8 supports interconnect topologies that are limited to 2 connections in a 30 meter channel for 25Gbps or 40Gbps network speeds.Vention CAT8 Flat Patch Cable provides a lower cost alternative than OM3 fiber connections under 30 meters or a SFP+ twin-axial connection under 5 meters Cat 8 Ethernet cable supports auto-negotiation for compatibility with mixed network server speeds from 1 Gbps to 40 Gbps.The superior Shielded design of this CAT8 cable includes individually foil-shielded bare copper connectors encased in a overall steel braid; fully shielded metal connectors have gold-plated RJ45 contacts and a snag-less boot with molded strain relief.Tested to support up to 2000 MHz (2 Ghz) that is 4x the frequency of CAT6A cable or CAT7 cable.
RACK case 19" 2U 130 mm whiteCR19-2U-130-WThe vertical RACK housing allows assembling the devices in the RACK standard with a maximum depth of 350 mm while taking up little space.Installation and operation of devices in a new type of RACK housing is trouble-free and extremely easy. The housing door opens from the top down at an angle of 90 degrees. For this reason we get full opening and unlimited access to the devices.Special cylinders mounted in the housing slow down the opening of the housing door. Such a solution causes the fact that the risk of damage to the assembled equipment is minimised and the comfort of use is significantly increased.Broken cable glands were designed in the back of the housing. They allow breaking the appropriate ribs which will make it easier to lead in and lead out cables. The door is closed with a patent lock (included with a set of two keys).The holes in the back of the housing allow it to be hung with wall plugs.
BKT RJ45 kaableid kasutatakse jaotuskappide ühendamiseks või seadmete ühendamiseks pistikupesadega. Neid kasutatakse serveriruumides, kontori- ja tööstusruumides ning elamuhoontes. BKT võrgukaablid põhinevad kvaliteetsetel komponentidel, et tagada nõuetekohane jõudlus.
BKT RJ45 kaableid kasutatakse jaotuskappide ühendamiseks või seadmete ühendamiseks pistikupesadega. Neid kasutatakse serveriruumides, kontori- ja tööstusruumides ning elamuhoontes. BKT võrgukaablid põhinevad kvaliteetsetel komponentidel, et tagada nõuetekohane jõudlus.
BKT RJ45 kaableid kasutatakse jaotuskappide ühendamiseks või seadmete ühendamiseks pistikupesadega. Neid kasutatakse serveriruumides, kontori- ja tööstusruumides ning elamuhoontes. BKT võrgukaablid põhinevad kvaliteetsetel komponentidel, et tagada nõuetekohane jõudlus.
BKT RJ45 kaableid kasutatakse jaotuskappide ühendamiseks või seadmete ühendamiseks pistikupesadega. Neid kasutatakse serveriruumides, kontori- ja tööstusruumides ning elamuhoontes. BKT võrgukaablid põhinevad kvaliteetsetel komponentidel, et tagada nõuetekohane jõudlus.
BKT RJ45 kaableid kasutatakse jaotuskappide ühendamiseks või seadmete ühendamiseks pistikupesadega. Neid kasutatakse serveriruumides, kontori- ja tööstusruumides ning elamuhoontes. BKT võrgukaablid põhinevad kvaliteetsetel komponentidel, et tagada nõuetekohane jõudlus.
BKT RJ45 kaableid kasutatakse jaotuskappide ühendamiseks või seadmete ühendamiseks pistikupesadega. Neid kasutatakse serveriruumides, kontori- ja tööstusruumides ning elamuhoontes. BKT võrgukaablid põhinevad kvaliteetsetel komponentidel, et tagada nõuetekohane jõudlus.
Directional High Power multiband LTE MIMO 2x2 antennaQuPanel LTE HP directional MIMO 2x2 high gain antenna is predicted for 4G LTE mainly but is compatible with 3G and 2G as well. The antenna improves the signal in rural/suburban and locations where the mobile signal is weak. That antenna is predicted to be installed on the buildings (on the pole or on the wall). Due to very wide working frequency range the antenna is universal client for LTE bands like LTE700/800/1800/1900/2100/2300/2600. It’s compatible with Teltonika: RUT240 RUT900 RUT950 RUT955 RUTX09 RUTX11 and other MIMO 2x2 LTE/3G/2G modems and routers.
QuPanel LTE HP MIMO 4x4Directional High Power multiband LTE MIMO 4x4 antennaQuPanel LTE directional MIMO 4x4 high gain antenna is predicted for 4G LTE high categories from cat 5 up to cat 19. The antenna improves the signal in rural/suburban and locations where the mobile signal is weak. That antenna is predicted to be installed on the buildings (on the pole or on the wall). Due to very wide working frequency range the antenna is universal client for LTE bands like LTE700/800/1800/1900/2100/2300/2600. It’s compatible with all MIMO 4x4 LTE modems and routers working in categories: cat 5 cat 6 cat 7 cat 9 cat 10 cat 11 cat 12 cat 13 cat 15 cat 16 cat 18 cat 19.Cable length:5 m
QuPanel LTE HP MIMO 4x4Directional High Power multiband LTE MIMO 4x4 antennaQuPanel LTE directional MIMO 4x4 high gain antenna is predicted for 4G LTE high categories from cat 5 up to cat 19. The antenna improves the signal in rural/suburban and locations where the mobile signal is weak. That antenna is predicted to be installed on the buildings (on the pole or on the wall). Due to very wide working frequency range the antenna is universal client for LTE bands like LTE700/800/1800/1900/2100/2300/2600. It’s compatible with all MIMO 4x4 LTE modems and routers working in categories: cat 5 cat 6 cat 7 cat 9 cat 10 cat 11 cat 12 cat 13 cat 15 cat 16 cat 18 cat 19.Cable length:5 m
Omnidirectional multiband LTE MIMO 2x2 antennaQuOmni LTE omnidirectional MIMO 2x2 LTE antenna is working in Vertical polarization it´s desired for LTE/3G/2G connections. The antenna can be used for the most popular LTE bands (e.g. 3 7 20) frequencies 694-2700 MHz. That antenna is predicted to be installed on the buildings (on the pole or on the wall) as the client antenna or on the moving points like trains buses lorries yachts boats to receive Internet by LTE/3G. It’s compatible with Teltonika: RUT240 RUT900 RUT950 RUT955 RUTX09 RUTX11 and other MIMO 2x2 LTE/3G/2G modems and routers.
QuOmni LTE omnidirectional SISO LTE antenna is working in Vertical polarization it´s desired for LTE/3G/2G connections. The antenna can be used for the most popular LTE bands (e.g. 3 7 20) frequencies 694-2700 MHz. That antenna is predicted to be installed on the buildings (on the pole or on the wall) as the client antenna or on the moving points like trains buses lorries yachts boats to receive Internet by LTE/3G. It’s compatible with Teltonika: RUT230 TRB140 TRB141 TRB142 TRB145 TRM240 TRM250 and other SISO LTE/3G/2G modems and routers.
QuCam for RUT240 is a powerful outdoor industrial gateway for professional CCTV application with embedded PoE switch for up to 3x CCTV cameras and place to install Teltonika RUT240 (not included in gateway set). QuCam for RUT240 also has integrated omnidirectional LTE and Wi-Fi antennas. The mobile router delivers high performance for mission-critical cellular communication in harsh and hazardous environments where a wide operating temperature is required. Equipped with an external SIM holder.RUT240 LTE router is shown for demonstration only and not included!
QuPanel LTE MIMO 4x4Directional multiband LTE MIMO 4x4 antennaQuPanel LTE directional MIMO 4x4 antenna is predicted for 4G LTE high categories from cat 5 up to cat 19. The antenna improves the signal in rural/suburban and locations where the mobile signal is weak. That antenna is predicted to be installed on the buildings (on the pole or on the wall). Due to very wide working frequency range the antenna is universal client for LTE bands like LTE700/800/1800/1900/2100/2300/2600. It’s compatible with all MIMO 4x4 LTE modems and routers working in categories: cat 5 cat 6 cat 7 cat 9 cat 10 cat 11 cat 12 cat 13 cat 15 cat 16 cat 18 cat 19.Cable length: 5m
QuPanel LTE HP MIMO 2x2Directional High Power multiband LTE MIMO 2x2 antennaQuPanel LTE HP directional MIMO 2x2 high gain antenna is predicted for 4G LTE mainly but is compatible with 3G and 2G as well. The antenna improves the signal in rural/suburban and locations where the mobile signal is weak. That antenna is predicted to be installed on the buildings (on the pole or on the wall). Due to very wide working frequency range the antenna is universal client for LTE bands like LTE700/800/1800/1900/2100/2300/2600. It’s compatible with Teltonika: RUT240 RUT900 RUT950 RUT955 RUTX09 RUTX11 and other MIMO 2x2 LTE/3G/2G modems and routers.
QuCam for RUT240 is a powerful outdoor industrial gateway for professional CCTV application with embedded PoE switch for up to 3x CCTV cameras and place to install Teltonika RUT240 (not included in gateway set). QuCam for RUT240 also has integrated omnidirectional LTE and Wi-Fi antennas. The mobile router delivers high performance for mission-critical cellular communication in harsh and hazardous environments where a wide operating temperature is required. Equipped with an external SIM holder.RUT240 LTE router is shown for demonstration only and not included!
LHGG LTE6 KIT – a great solution for great distances. With Gigabit Ethernet an upgraded dual-core CPU a powerful 17 dBi antenna and a massive heat sink you can trust the LHGG LTE6 kit to handle any challenge!Do you want high-speed Internet in the middle of nowhere? Then you want our newest LHGG LTE6 kit! It is a device for “last mile” Internet access in very remote locations. Mount it outdoors on a pole mast or any tall structure and connect even where cell phones fail. Due to its large high-gain 17 dBi antenna the LHGG LTE6 kit can connect to cell towers in extreme rural locations giving you the ability to provide last mile internet access where nothing else is available.The LHGG LTE6 kit features a 300 Mbps CAT6 LTE modem which enables carrier aggregation and allows the device to use multiple bands at the same time. That is a huge advantage when there are a lot of LTE users in the area. It provides better responsiveness in a crowded environment and higher efficiency for weaker signal situations in the countryside. We have seen Internet speed doubling in rural areas after switching to CAT6 so there is no need to wait for cable network expansions.This device features a Gigabit Ethernet port with PoE-in for powering the device from the Ethernet port. The grid antenna design can withstand harsh windy weather and can be mounted in different ways. There is a massive heat sink so you don’t have to worry about overheating. With this device you can really focus on the important stuff while the tech simply works in the background.
The Archer VR400 unlocks the full potential of your Internet connection by providing combined dual band Wi-Fi speeds of up to 1.2 Gbps, including 300 Mbps on the 2.4 GHz band and 867 Mbps on the 5 GHz band, eliminating lag and buffering from your online experience. Two dedicated Wi-Fi networks support more devices and reduce wireless interference to create stable connections.
LtAP LR8 LTE - a compact all-in-one solution with LTE GPS and wireless support for LoRa® in a rugged heavy-duty case!Inside the heavy-duty case there is a powerful 2.4 GHz wireless access point with a Gigabit Ethernet port built-in GPS and two internal LTE antennas. There are two miniPCIe slots – one is used for the LTE modem the other one is populated with the concentrator gateway card for LoRa® technology.There are three powering options: DC jack PoE-in and automotive.Internet-of-things has never been so affordableTo fully understand what this device can do we need to talk about Internet-of-things. Let’s start with an example. Imagine a farmer who has cattle an irrigation system for the crops and storage for the goods. On a day-to-day basis he needs to: track the animals monitor the grain stock level control the irrigation system For all these tasks the farmer can use low-cost wireless sensors. By connecting them to the LtAP - he can gather the real-time data combine it with the location information of the vehicle and send it to the cloud via high-speed LTE. Now all the information he needs to monitor and plan the growth of his farms is in one place. So simple and so handy. The wireless technology behind this is called LoRa® which stands for Long Range. It requires very low power. That’s why LoRa® is the best way to build your Internet-of-things solutions. LoRa® can be used for anything from smart homes to agriculture supply chains logistics and even smart cities. Monitor parking spaces track utility services measure environmental data and so on - the possibilities are endless.There is even a free server infrastructure that you can use - The Things Network fully supported by the LtAP LR8 LTE kit. With a large community of enthusiasts and developers around the world you will never be alone with your questions regarding the LoRa® network.Perfect for logistics and trackingThere are 3 MiniSIM slots you can use to set up automatic switching between mobile operators. Very convenient if you have to cross the border regularly. The device features two internal LTE antennas but you can use the U.FL connectors to add external antennas of your choice for even better coverage. The same goes for the GPS – you can attach an external antenna as well. By the way Mikrotik has provided a simple application example on the RouterOS documentation website so you can start real-time location tracking right away!The Things NetworkMikrotik products for LoRa® are ready to work with “The Things Network” - the famous open source infrastructure that provides free LoRa® network coverage and has tons of apps for your needs. With the help of “The Things Network” you can get started with the Internetof- things within a day. And it is easily upgradable to enterprise-grade network “The Things Industries”.The setup is so easy - anyone can learn it. No need to reinvent the wheel – join “The Things Network” to save time and energy with smart solutions!
UniFi® Access Reader Pro is a premium NFC and Bluetooth reader with sharp touchscreen display and high-resolution camera a part of the UniFi Access solution. The UniFi Access Reader Pro has been designed for superior guest experience and employee convenience. The PoE powered reader is easy to install and supports the latest NFC security standards including AES-128 encrypted MIFARE DESFire. Unlocking the door is quick and secure with NFC card or with mobile app.Features: Premium NFC and Bluetooth reader 802.3af PoE powered by UniFi Access Hub High resolution touchscreen and integrated camera Advanced NFC credentials including MIFARE DESFire Built-in security element chip For the best NFC security use with our UA-Card Mobile access with app (future software release) Intercom call functionality to request entry (future software release) Note: UniFi Dream Machine Pro is required to run UniFi Access (NOT included and sold separately!)
BLUE PUCK MOVExtend device limits with new Bluetooth 4.0 LE movement sensor! Teltonika is always focused on innovation and constantly offers new solutions to customers. Latest addition of BLE sensors extends covered business cases: assets trailers or any other spec equipment motion status monitoring angular position and unexpected movement detection. Bluetooth motion sensors are small signal transmitters with configurable signal strength and data send intervals. Sensor uses advanced Bluetooth 4.0 LE technology to get data from long distance and can work from one battery up to 12 years.List of devices compatible with this accessory: FMC125 FMC130 FMM125 FMM130 RUTX11 RUTX10
Teltonika FMC640 is a PROFESSIONAL series device with 4G (LTE Cat 1) network coverage including 3G (UMTS) 2G (GSM) fallback compatibility. Device equipped with GNSS and LTE modules external GNSS and LTE antennas. FMC640 will maximize your fleet efficiency with features like FMS CAN data (J1939) fuel CAN data (J1708) tachograph live data (K-Line) remote tachograph file download various third party RS232 or RS485 devices support and Dual-SIM.Terminal is suitable for applications like international logistics refrigerated transport agriculture construction & mining security & emergency services and even more.
UniFi® Access Hub is an intelligent IP networked single door controller a part of UniFi Access solution. The UniFi Access Hub comes with versatile interfaces including support for most electric bolts/strikes magnetic locks and 12V access accessories such as motion sensors push buttons and alarms. The three Ethernet PoE powered reader interfaces minimize need for wiring work and offer a convenient way to add a UniFi G3-Flex surveillance camera for additional security. The seamlessly integrated UniFi Access solution is managed with UniFi Access Controller software. Easily manage users visitors schedules and access policies with the with the intuitive browser-based interface.Features: Powered by 802.3bt (PoE++) switch Three 802.3af PoE ports for UniFi readers and G3 Flex surveillance camera 12V powered and dry relays compatible with most locks Four inputs for motion sensors request-to-exit devices and door position switch Managed with UniFi Access Controller in UDM-Pro DIN-rail mounting Note: UniFi Dream Machine Pro is required to run UniFi Access (NOT included and sold separately!)
