AX1800 Gigabit Wi-Fi 6 Access Point Gigabit WiFi 6 Speed – 1.8 Gbps Dual Band WiFi for faster browsing, streaming and downloading, all at the same time.† Flexible Deployment – Supports Passive PoE to carry electrical power and data simultaneously. Multiple Modes – Supports Access Point, Range Extender, Multi-SSID, and Client modes to meet any network needs. Boosted Coverage – Four fixed antennas equipped with Beamforming technology extend and concentrate the Wi-Fi signals. Captive Portal – Offers a designed portal page for heightened security and marketing.
TSW210 INDUSTRIAL ETHERNET SWITCH The TSW210 is an Ethernet switch offering a perfect combination of Gigabit Ethernet and SFP. Eight Ethernet ports allow you to quickly and easily connect multiple devices to the network, without the need for further configuration. SFP enables remote devices to be enabled while maintaining high speed and reliability.
Type 3G/4G Modem | Data transmission speed 300 Mbps | Number of antennas 2 | Wireless Frequency Range 2.4 GHz | Wireless Transmit Power 20 dBm | Power supply requirements 12V/1A DC | Dimensions 226.6 x 100x 54.7mm
ASUS RT-BE90U Next-Level Smart Home WiFi 7 Elevate your smart home with blazing-fast tri-band WiFi 7 speeds of up to 9400 Mbps, boosted range with ASUS RF and AI-boosted Smart AiMesh technology. The ASUS RT-BE90U unleashes superior 6 GHz WiFi and ultra-fast 2.5G networking. With next-gen ASUS Network Security and a suite of advanced network technologies such as IoT Network, the RT-BE90U safeguards your network end-to-end, 24/7. Ultrafast WiFi 7 – WiFi 7 (802.11be) tri-band extendable router boosts speeds up to 9400 Mbps, with 320MHz and 4096-QAM increasing a single frequency band’s transmission speed by 2.4 times Unleashing Multi-link operation (MLO) for Ultra-Smooth Connectivity – Link to multiple bands at the same time to ensure stable internet connections and efficient data transfers Quad 2.5G Ports – Traffic via 2.5G ports has top priority, supported by flexible WAN/LAN port configurations to maximize wired connectivity Smart Home Master – Easily establish up to three SSIDs with Smart Home Master for easy IoT device setup and management, instant VPN connections, and convenient parental controls Hassle-free AiMesh Extendable Network – AiMesh extendable routers enable whole home seamless roaming with rich, advanced features Commercial-Grade Network Security – Network security with commercial-grade AiProtection, plus a one-tap security scan and Safe Browsing 4G LTE/5G mobile tethering – Supports 4G LTE/5G mobile tethering for always-on internet
The new MikroTik Gigabit PoE adapter for powering any RouterBOARD over Gigabit Ethernet. Simply connect your power source and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead up the tower. For using with any RouterBOARD that supports 9-48V PoE.
CRS326-24G-2S+RM SwOS/RouterOS powered 24 port Gigabit Ethernet switch with two SFP+ ports, wire speed connectivity with several new switching features! It has “Dual boot” feature that allows you to choose which operating system you prefer to use, RouterOS or SwOS. If you prefer to have a simplified switch only OS with more switch specific features, use SwOS. If you are used to Winbox and would like the ability to use routing and other Layer 3 features on some ports in your CRS, boot and use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields. SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules. SwOS Features • Non-blocking Layer 2 switching capacity • 16K host table • IEEE 802.1Q VLAN • Supports up to 4K simultaneous VLANs • Port isolation• Port security • Broadcast storm control • Port mirroring of ingress/egress traffic • Rapid Spanning Tree Protocol • Access Control List • MikroTik neighbor discovery • SNMP v1 • Web-based GUI
The SXTsq Lite5 is a compact and lightweight outdoor wireless device with an integrated antenna. Perfect for point to point links of up to 12 kilometers or as a CPE unit. It is compact, weatherproof and easy to mount. The SXTsq Lite5 retains a 16dBi antenna like the SXT Lite5, our previous model, yet the antenna design has been improved and the physical size has been dramatically reduced - the SXTsq is two times thinner (see photos for comparison). The device can be mounted on horizontal and vertical poles and masts, but for precise alignment, separately available is the QuickMount Pro, which allows to adjust in every angle (see photo and related product). - SXTsq Lite5-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed. - SXTsq Lite5 (International) supports 5150MHz-5875MHz range.Included Parts Wireless specifications5 GHz Transmit power (dBm)Receive SensitivityTransmit power (mW)6MBit/s25-9631654MBit/s20-80100MCS025-96316MCS719-7579
The Wireless Wire is a ground breaking solution which offers fiber speed and quality for a fraction of the price. This amazing kit replaces your Gigabit ethernet cable with two small devices that connect to each other over a 60 GHz wireless link.Simply point the included devices at one another and power them on, it will make a 1 Gbit full duplex link to instantly replace your cable - this is why we call it the Wireless Wire! The Wireless Wire makes secure AES encrypted 60 GHz wireless link that is not affected by the crowded WiFi spectrum, offering a stable and fast link for distances of 100 meters or more. The box includes two wAP60G devices that are already paired together, a wall mounting kit, straps for pole mounting and also a pair of table stands for using the devices indoors. The link will even work through most windows, depending on their material. The box includes a wall mounting kit, straps for pole mounting and also a pair of table stands for using the devices indoors Ethernet test resultsRBwAPG-60ad kitIPQ-4019 1G one port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)81.2986.1234.9962.21483.0759.3Bridging25 bridge filter rules81.2986.1227.7932.7231.9118.7Routingnone (fast path)81.2986.1234.9962.21489.5762.6Routing25 simple queues81.2986.1234.9962.2375.7192.4Routing25 ip filter rules81.2986.1177.9728.7180.192.2
TRB family devices are designed to be small, lightweight and energy efficient - allowing you to do IoT projects with ease. TRB142 comes with widely used RS232 port for remote device management. It contains a high performance ARM Cortex-A7 1.2GHz processor and 128 megabytes of RAM. It is equipped with mission-critical LTE capabilities and a Linux environment offering high degree of customization.HardwareMobileLTE(Cat1)/3G/2GCPUARM Cortex-A7 1.2 GHz CPURAM128 MBytes (50 MBytes available for userspace)Flash512 MBytes (70 MBytes available for userspace)Power connector4 pin industrialSIM slotMini SIM (2FF)Antenna connectors1 x SMA for LTELEDsPower, signal, network and data statusRS232 connectorDB9 socket, 5 pin configuration with flow controlOtherMicro-USB connector, Reset buttonSecurity/SW featuresNetworkingFirewall, NATRS232 related servicesModbus, Serial over IP, NTRIPRemote ManagementRMS Support, FOTA support, SSH, CLI, SMS UtilitiesAdditional featuresUSB virtual network interface, Input/OutputElectrical, Mechanical & EnvironmentalInput voltage9 - 30 VDCOperating temperature-40° C to 75° CStorage temperature-45° C to 80° COperating humidity10% to 90% non-condensingStorage humidity5% to 95% non-condensingDimensions60 mm x 70 mm x 18 mmWeight50 gMobileLTE(Cat1)/3G/2GCPUARM Cortex-A7 1.2 GHz CPURAM128 MBytes (50 MBytes available for userspace)Flash512 MBytes (70 MBytes available for userspace)Power connector4 pin industrialSIM slotMini SIM (2FF)Antenna connectors1 x SMA for LTELEDsPower, signal, network and data statusRS232 connectorDB9 socket, 5 pin configuration with flow controlOtherMicro-USB connector, Reset buttonSecurity/SW featuresNetworkingFirewall, NATRS232 related servicesModbus, Serial over IP, NTRIPRemote ManagementRMS Support, FOTA support, SSH, CLI, SMS UtilitiesAdditional featuresUSB virtual network interface, Input/OutputElectrical, Mechanical & EnvironmentalInput voltage9 - 30 VDCOperating temperature-40° C to 75° CStorage temperature-45° C to 80° COperating humidity10% to 90% non-condensingStorage humidity5% to 95% non-condensingDimensions60 mm x 70 mm x 18 mmWeight50 g
This robust industrial router is equipped with 4 x Gigabit Ethernet ports, Quad-core CPU and 256 MB of RAM. These powerful specifications combined with core RutOS software features such as advanced Firewall and RMS support makes this device a superb Industrial performer where no Cellular or WiFi connectivity is required.ETHERNETWAN1 x WAN (can be configured to LAN) 10/100/1000 Mbps, comply IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossoverLAN3 x LAN ports, 10/100/1000 Mbps, comply IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossoverNETWORKRoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2)Network protocolsTCP, UDP, IPv4, IPv6, ICMP, UDP, NTP, DNS, HTTP, FTP, SMTP, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPPVoIP passthrough supportH.232 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packetsConnection monitoringPing Reboot, Periodic Reboot, LCP and ICMP for link inspectionFirewallPort forward, traffic rules, custom rulesDHCPStatic and dynamic IP allocation, DHCP RelaydQoSTraffic priority queuing by source/destination, service, protocol or port, WMM, 802.11eDDNSSupported >25 service providers, others can be configured manuallyNetwork backupVRRPSSHFS (optional)Possibility to mount remote file system via SSH protocol (not available in standard FW)MONITORING & MANAGEMENTWEB UIHTTP, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel logFOTAFirmware update from server, automatic notification.SSHSSH (v1, v2)TR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVsystemsSNMPSNMP (v1, v2, v3), SNMP trapJSON-RPCManagement API over HTTPMODBUSMODBUS TCP status/controlRMSTeltonika Remote Management System (RMS)SYSTEM CHARACTERISTICSCPUQuad-core ARM Cortex A7, 717MHzRAM256MB, DDR2FLASH memory256MB SPI FlashFIRMWARE / CONFIGURATIONWEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backupFOTAUpdate FW/configuration from serverRMSUpdate FW/configuration for multiple devicesKeep settingsUpdate FW without losing current configurationFIRMWARE CUSTOMIZATIONOperating systemRutOS (OpenWrt based Linux OS)Supported languagesBusybox shell, Lua, C, C++Development toolsSDK package with built environment providedINPUT/OUTPUTInput1 x Digital Input (Non-isolated, Logic low 0...+5V, Logic high +8...+40V)Output1 x Digital Output (open collector type, 30V@0.3A)EventsEMAIL, RMSUSBData rateUSB 2.0ApplicationsSamba share, custom scriptsExternal devicesPossibility to connect external HDD, flash drive, additional modem, printerStorage formatsFAT, FAT32, NTFSPOWERConnector4 pin industrial DC power socketInput voltage range9 - 50 VDC, reverse polarity protection, voltage surge/transient protectionPoE (passive)Passive PoE. Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at standardsPower consumption11W Max.PHYSICAL INTERFACES (PORTS, LEDS, BUTTONS)Ethernet4 x RJ45 ports, 10/100/1000 MbpsStatus LEDs3 x connection status LEDs, 5x connection strength LEDs, 8x LAN status LEDs, 3x WAN status LEDs, 1x Power LEDPower4 pin industrial DC power socketUSBUSB A socket for external devicesResetReset/restore to default buttonPHYSICAL SPECIFICATIONCasing materialFull aluminium housingDimensions115 mm x 95 mm x 32 mm (H x W x D)Weight357 gMounting optionsDIN rail (can be mounted on two sides), flat surface placementOPERATING ENVIRONMENTOperating temperature-40 C to 75 COperating humidity10% to 90% non-condensingIngress Protection RatingIP30
USP-RPSThe UniFi® SmartPower Redundant Power System, model USP-RPS, is a proprietary redundant power system designed to protect up to six UniFi SmartPower supported devices from sudden power supply module failure. The USP-RPS continually monitors all attached devices. In the event of an internal AC/DC power supply failure, failover is automatic so your network continues to operate with no interruption in service. With a 950W DC power budget, the USP-RPS can protect a variety of high-power devices, including UniFi PoE switches. An integrated 1.3" color touchscreen LCM displays system information for convenient monitoring.
Mercusys AC1300 Whole Home Mesh Wi-Fi System Halo H30G (3-Pack) 802.11ac, 400+867 Mbit/s, Ethernet LAN (RJ-45) ports 2, Mesh Support Yes, MU-MiMO Yes, White
The Switch Enterprise XG 24 (USW Enterprise XG 24) is a fully managed mult-gigabit Layer 3 switch with (24) 10GbE RJ45 ports and (2) 25G SFP28 ports. The USW Enterprise XG 24 also features a 1.3" LCM color touchscreen that concisely displays key system and connection insights.Additionally the USW Enterprise XG 24 offers enhanced power supply failure protection when connected to the SmartPower Redundant Power System (USP RPS sold separately). This switch can be monitored or configured from anywhere with the powerful intuitive UniFi Network web application and mobile app.
MS108GP 8-Port Gigabit Desktop Switch with 7-Port PoE+ - Full Gigabit Ports: 8× 10/100/1000 Mbps RJ45 ports - Two Cables in One: With 7 PoE+ ports, transfers data and power on one single cable - High Power PoE+: Support PoE Power up to 30 W for each PoE port and 65 W for all PoE ports - Long-Range up to 250 m: Increases PoE transmission distance to 250 m by Extend Mode - Isolation Mode: One click to divide traffic for specific ports for stability and security - Compliant with Powered Devices: Works with IEEE 802.3af/at compliant PDs - Durable Metal Casing: Allows for efficient heat dissipation and long network life - Plug and Play: Simple to use and saves time and effort
The Ubiquiti UniFi Switch Ultra 60W is a pivotal addition to any network, designed to deliver both efficiency and reliability. With its stable DC 27 V power supply, this switch ensures that all connected devices operate smoothly, without any power interruptions. It's an ideal solution for businesses looking to enhance their network's productivity and connectivity. The switch's robust design and reliable performance make it a valuable asset for any setup, promising to elevate the operational standards of your network infrastructure.
Tutvustame MikroTik RouterBOARD RB750GR3, 4P MikroTik RouterBOARD RB750GR3 - usaldusväärne ja kuluefektiivne võrgulahendus nii väikestele kontoritele kui ka eramutele. Tänu oma kompaktsele disainile sobib see hõlpsasti igasse tööruumi, ilma et oleks vaja teha järeleandmisi võimsuse ja tõhususe osas. Viie Gigabit Ethernet-porti abil pakub RB750GR3 usaldusväärset ja kiiret mitme seadme ühenduvust, mistõttu on see ideaalne keskkondadesse, kus tõhusus ja kiirus on võtmetähtsusega. Selle jõuallikaks on suure jõudlusega kahetuumaline 880 MHz protsessor, mis tagab sujuva töötluse ja minimaalse viiteaja isegi suure võrgukoormuse korral. Lisaks on seade varustatud 256 MB RAM-iga, mis võimaldab hõlpsasti täita keerulisi võrguülesandeid ja hallata suuri andmemahte. RB750GR3 töötab MikroTik'i RouterOS tarkvaraga, mis pakub põhjalikku komplekti võrguvahendeid, nagu tulemüüri kaitse, ribalaiuse haldamine ja VPN-funktsioonid. See kõrge kohandamise tase võimaldab kasutajatel kohandada oma võrgu seadistust vastavalt oma konkreetsetele vajadustele, olgu see siis isiklikuks kasutamiseks, kaugtööks või väikeettevõtte keskkonnaks. Energiatõhus disain ei aita mitte ainult vähendada energiatarbimist, vaid pikendab ka seadme kasutusiga, muutes selle keskkonnasõbralikuks ja kuluefektiivseks valikuks. Lisaks võimaldab selle kasutajasõbralik kasutajaliides lihtsat seadistamist ja kasutamist, nii et isegi minimaalsete tehniliste teadmistega inimesed saavad hõlpsasti tööle hakata. 4P MikroTik RouterBOARD RB750GR3 on usaldusväärne ja mitmekülgne valik neile, kes soovivad laiendada oma võrgu võimalusi võimsa ja tõhusa ruuteriga.
Discover the reliability and performance of the Ubiquiti UniFi network cable, a vital component for any modern network setup. This CAT 6 patch cable features male RJ-45 connectors on both ends, ensuring a secure and efficient connection between your devices. With compliance to TIA/EIA-568-B.2 standards, it delivers dependable network performance. Additionally, its VW-1 (UL1581) certification attests to its safety and durability, making it an ideal choice for indoor environments. Whether for home or office use, this network cable is designed to meet the demands of your networking needs, providing a stable and high-speed data transmission solution.
Router LT400 Outdoor LTE FDD/TDD Cat 4 N300 Wi-Fi 1 x 10/100Mbps WAN/LAN Nano SIM Slot 24V Passive PoE 2 x Internal WiFi Antennas + 2 x Detachable 4G Antennas VPN & DDNS IP65 WaterProof Turn Everywhere 4G into N300 Wi-FiWith 4G Cat.4 standards, LT400 Outdoor communicates with a 4G tower with speeds of up to 150 Mbps download and 50 Mbps upload. It features a N300 Wi-Fi, providing reliable network for web browsing,video streaming, surveilance, and POS services.Boosted Wi-Fi Coverage with BeamformingTested Wi-Fi coverage performance in four dierent scenarios, achieved by Beamforming technology and two built-in antennas. If your space is too large for one Cudy 4G Outdoor Router to cover, you can expand your Wi-Fi coverage into a Mesh network by adding another Cudy AP.Insert a SIM, Enjoy Wi-FiInstall Wi-Fi anywhere is as easy as plugging a SIM card and booting it up with the PoE adapter. One PoE Adapter is included in the box.Pull Network to 100 m AwayPlug your Ethernet cable into the PoE adapter/switch to get up to 100 m of wired network reach. The extra cable is not included in the box.Install an AP for Indoor Wi-FiConnect an AP to the PoE adapter to equip your cafe, home, or oce with a better Wi-Fi signal. AP needs to bepurchased separately.Install Extension AntennasThe default 4G antennas are as sensitive as a standard phone's antennas. You can still replace them with customized ones via the SMA connectors.
