300Mbps Multi-Mode Wireless N Router Fast Wi-Fi for Daily Life — MW302R provides fast and stable connections to meet all your network needs with speeds of up to 300 Mbps Broader Coverage — Equipped with high gain external antennas to deliver strong Wi-Fi signals to every corner of your home Multi-Mode — Four modes in one device to satisfy all application scenarios Easy installation — Intuitive webpage guides you through the setup process in minutes Active Parental Controls — Establish appropriate access policies to protect children with responsible, safe internet access Compatible with IPv6 (Internet Protocol version 6)
Features: High quality imaging with 2 MP resolution Efficient H.264 compression technology Clear imaging even with strong back lighting due to DWDR technology Water and dust resistant (IP67)
M1300 3-pack AC1200 Dual Band Whole Home Wi-Fi Mesh Wi-Fi AC1200 network 867 Mbps on the 5 GHz band and 300 Mbps on the 2.4 GHz band Seamless roaming, coverage throughout your home 2 Gigabit Ethernet ports Compatible with 15 additional DDNS providers PPTP/L2TP/OpenVPN/WireGuard/IPSec/Zerotier VPN
MikroTik LHG LTE18 Kit LHGGM&EG18-EA No Wi-Fi, Pole and Mast Mountable, 10/100/1000 Mbit/s, Ethernet LAN (RJ-45) ports 1, 1 Gbps (RJ-45) ports quantity 1, Mesh Support No, MU-MiMO Yes, 3G/4G data sharing
This table microphone by Delock is suitable for use in conferences. Optimal recordings The microphone has a circle pattern (omnidirectional) and therefore captures the acoustic signal ideally. Due to a high power, low self-noise and precise performance, even the finest sounds are optimally recorded. Touch mute button & status LED The touch mute button quickly mutes the microphone. The LED is red when muted and green when recording. Headphone output The microphone has a 3.5 mm stereo jack output for connecting headphones or speakers. Plug & Play Due to USB Plug & Play the microphone is ready to use immediately, no driver installation is needed. The microphone works with all common operating systems such as Windows, Mac OS, Chrome OS and Linux. Specification • Connectors: 1 x USB 2.0 Type-A male 1 x 3.5 mm 3 pin stereo jack female • Directivity: omnidirectional • Sensitivity: -16 dB +/- 3 dB • Frequency range: 100 Hz - 10 kHz • Sample rate: 16 Bit / 44.1 kHz • Signal-to-noise ratio (SNR): ca. 65 dB • Mute-Button • Status LED • Cable length: ca. 1.5 m • Colour: black • Dimensions (Ø x H): ca. 75 x 19 mm • USB bus powered • Plug & Play System requirements • Chrome OS • Linux Kernel 4.4 or above • Mac OS 10.9 or above • Windows 7/7-64/8.1/8.1-64/10/10-64 • PC or laptop with a free USB Type-A port Package content • USB microphone • User manual
With a passive twin-ax cable assembly of 3 meters and two SFP+ connectors on each side, TL-SM5220-3M is suitable for short distances and offers a cost-effective way to connect within racks and across adjacent racks.
> Layer 2 management PoE switch > Intelligent PoE > Red port supports 90W IEEE802.3bt > Web management with friendly interface and easy operation > 250 m long distance PoE transmission > PoE watchdog > Plug and play Communication Standard: IEEE802.3; IEEE802.3u; IEEE802.3x; IEEE 802.3ab; IEEE 802.3z PoE Standard: IEEE802.3af/ IEEE802.3at/ Hi-PoE/IEEE802.3bt Port 1-16: 16 × RJ-45 10 M/100 M (PoE) Port 17-18: 2 × RJ-45 10 M/100 M/1000 M (uplink) Port 17-18: 2 × SFP 1000 M (uplink) (combo) PoE Budget: Port 1-2 ≤ 90W, Port 3-16≤ 30W, total ≤ 240W
The effective connection distance is 100 meters on Cat5e/Cat6 cable. The solution is small but very effective. The DN-95132 is an active indoor PoE midspan injector power supply designed specifically for complex backhaul and networking applications. Provides 52 V DC, 0.58 A power for external devices requiring PD power through 2 pairs of output sockets. The solution supports both 10/100 Base-T and Gigabit compatible devices. The solution works with devices that support PD PoE with a power of 30 W, such as wireless access points, WLAN routers, network cameras, IP phones, radio devices and other end devices compatible with power over Ethernet. The solution is fully compliant with the PoE IEEE802.3af standard. The device has a plastic housing protected against fire with a protection level of IP40. The solution supports a wide input voltage range of 100-240 V AC, 50 or 60 Hz. It has a detection chip inside that recognizes and classifies a power-demanding device (PD) before power is supplied to that device. Provides power only when a device supporting the PD (Power Delivery) standard is detected. provides 52 V DC, 0.58 A power for external devices requiring PD power through 2 pairs of output sockets support for both 10/100 Base-T and Gigabit compatible devices the solution supports a wide input voltage range of 100-240 V AC, 50 or 60 Hz Easy-to-use combination of power and data cables in one cable Each output port offers output current limit function, short circuit protection, full powered device detection and classification (PD) Injector can be used regardless of the operating system
Smart L3 Managed Stackable Switches DGS-1520 Series Stacking Physically stacking up to 8 switches for expansion and redundancy. Touchless installation Seamless multi-site deployment with automatic configuration download. Large PoE budget Power over Ethernet (PoE) budget up to 370W allows you to power multiple devices. 10G connections Four 10-gigabit ports for stacking or uplinking. Multi-gigabit PoE ports Four 2.5G PoE ports, ideal for Gigabit Wi-Fi 6 access points. Redundant power An optional redundant power supply ensures uninterrupted operation. Advanced L2 and L3 features Easily adapt to network changes with selectable Q-in-Q, VRRP, RIP and OSPF features. Limited Lifetime Guarantee Register your product to take advantage of Lifetime Limited's lifetime warranty. A new dimension in Managed Smart Switches Expandable network with high-performance 10-gigabit stackable switches to increase productivity and uptime. x8 Eight connected switches form a redundant stack with up to 384 gigabit ports. 188Gbps High throughput data transfer between connected devices at up to 188 Gbps. x4 Four 2.5G PoE ports (PoE models), ideal for Wi-Fi 6 access points. High availability Simplification of management and cabling increases the efficiency and reliability of the network. Physical stacking up to 8 switches with a total bandwidth of 80G. Designed with Wi-Fi 6 in mind The multi-gigabit 2.5G ports on the DGS-1520 series PoE switches eliminate potential bottlenecks in connecting to WiFi 6 gigabit access points. Touchless deployments For multi-site network expansion, the latest firmware and network configurations for the DGS-1520 series switches can be downloaded without the need to involve on-site IT personnel, making deployments easier and faster. Advanced L2 and L3 features Advanced, selected software features - Q-in-Q, VRRP, RIP and OSPF enable adaptation to changes in the network. For businesses with increasing bandwidth and network expansion requirements, the DGS-1520 series switches are a cost-effective upgrade option with 10-gigabit connections for network infrastructure. Hybrid staking Stack up to eight DGS-1520 switches using 10GBASE-T copper and/or SFP+ fiber ports. Hybrid stacking support increases cabling capability and lower cost by using copper instead of fiber. Simplified management Centrally manage multiple large networks with wired or wireless devices using D-View 7 to reduce cost and maintenance. There is also a D-Link Network Assistant (DNA) available to simplify setup and management of smaller networks.
Desktop switch, 16 gigabit ports, including 16 PoE+ ports 16 Gigabit RJ45 ports 16 PoE+ ports, power and data transfer via one cable Compatibility with PoE-powered devices operating in IEEE 802.3af/at standards. Up to 30 W of PoE power on each PoE port PoE power supply support up to 120W for all PoE ports Up to 250m of data and power transmission in Extend mode Priority mode provides high priority for ports 1-4 Isolation Mode enables one-click separation of client traffic for improved security and performance. Automatic restart of PoE-powered devices that are dead or unresponsive thanks to the PoE Auto Recovery function. Plug and play connection, no configuration or complicated installation required. Dedicated 16 PoE+ ports (120 W budget) for many applications Compatibility with the 802.3af/at PoE+ standard provides up to 30 W of power on each PoE port. A total PoE power budget of 120W* for 16 PoE+ ports opens up a wide range of applications such as surveillance in offices, dorms and small businesses. It is fully compatible with IP cameras, access points, IP phones, computers, printers and more Perfect for monitoring - Up to 250 m of transmission Thanks to the Extend mode, the transmission distance can reach up to 250m, perfect for installing IP cameras in large areas. Auto lifting system with PoE Auto Recovery The switch automatically detects and restarts PoE-powered devices such as cameras and access points when they stop working or become unresponsive, ensuring stable device operation without the need for manual monitoring and restarting. Intelligent power management When total power consumption exceeds 120W, Intelligent Power Management turns off power to the lowest priority port to provide power to higher priority ports and thus protect the device from overload. It also enables automatic detection of the PoE power required by a given device and protects non-PoE devices from damage. Durable metal housing The internal components of the TL-SG116P switch are protected by a high-quality metal housing ensuring a long product life. After passing a series of rigorous reliability tests, the TL-SG116P delivers switching performance you can rely on.
The Ubiquiti UniFi CAT 6 Network Cable is designed to provide reliable connectivity indoors with its build quality. This patch cable features molded connectors that enhance durability, ensuring consistent performance with every use. Equipped with Etherlighting technology, this cable supports 2.5 Gigabit Ethernet speeds, making it suitable for applications that require high data transfer rates. The translucent connector boots add a touch to the cable design while maintaining functionality. With PoE++ readiness, this cable is suitable for powering devices over the network without the need for additional power sources.
GS1005P 5-port gigabit POE+ switch Compliant with IEEE802.3, IEEE 802.3u, IEEE 802.3ab, IEEE802.3af, IEEE802.3at It has 5 10/100/1000Base-TX ports Total PoE power output 60W 10Gbps high throughput IEEE802.3x flow control EMI standards compliant with FCC, CE class B
WU1300S AC1300 High Gain USB Wi-Fi Adapter AC1300 WiFi speed Dual Band - Perfect for video streaming and online gaming The high-gain antenna provides a strong signal Home Security standards ensure the security of your wireless network Compatible with Windows 7/8/8.1/10, Mac OS
