Habotest HT609PRO Gas Leak DetectorThe Habotest HT609PRO sensor will provide you with fast and accurate leak detection. Among other things, the device recognizes methane, propane, butane, carbon monoxide, ammonia, acetylene, acetone, benzene, hydrogen, ethanol, kerosene, solvent and many others, allowing you to effectively monitor safety at home, work, workshop or laboratory. It also allows accurate measurement of gas concentration in PPM units. A color LCD display with an intuitive bar graph, a 1.5-meter telescopic probe and a dual alarm system (sound and light) make operation easy.Precise detectionThe device detects all LEL (Lower Explosive Limit) gases, i.e. substances that can become explosive when they exceed a certain concentration in the air. Thanks to its wide detection range (50-1000 PPM) and fast response time (2-5 seconds), the Habotest HT609PRO sensor allows immediate detection of danger.Telescopic probeThanks to its flexible 1.5-meter-long probe, the sensor allows you to check hard-to-reach areas without using a ladder or dismantling the installation. The Habotest HT609PRO is ideal for inspecting gas installations in buildings and LPG systems in vehicles, ensuring convenience and safety of use.Sensitivity adjustmentThe detector offers a three-stage sensitivity adjustment, so you can adapt its performance to your environment. The high sensitivity mode detects already minimal amounts of gas, while the low sensitivity mode eliminates interference in environments with higher gas concentrations. An audible alarm sounds depending on the sensitivity setting - from the second to the eighth bar of the chart.Safety and convenienceThe Habotest HT609PRO warns of gas detection with an audible and light signal. The color LCD screen displays measurements in an easy-to-read graphical form, allowing easy interpretation of the results. A low battery indicator reminds you to replace the battery. You'll power the device with 3 AAA batteries, which are included in the package.Durable designThanks to its compact and ergonomic design, the sensor fits perfectly in your hand. It is made of durable materials to ensure resistance to damage and wear. The automatic shut-off function after 5 minutes of inactivity extends the device's working time.Included:Habotest HT609PRO gas leak detectorProtective bag for storageAAA battery x3User manual ManufacturerHabotestManufacturer codeHT609PRORangeapproximately 50 ~ 1000ppm (methane)Sensitivity> 50 PPM (methane)Extendable probeYes, 1.5mTest gases (partial list)Acetone, acetylene, alcohol, ammonia, benzene, butane, ethanol, oxirane, gasoline, hexane, hydrogen, methane, gasoline, kerosene, natural gas, paint thinners, propane, solvents, etc.Start-up timeapproximately 30 secondsResponse time500ppm: approx. 2sAlarm modeAudible and lightAutomatic power offyesPower supply3 x 1.5V AAA batteryWorking temperature0 to 50°CWorking humidity20 to 80%Storage temperature-10 to 60°CStorage humidity20 to 80%
FEATURES 5 10/100Mbps Auto-Negotiation, Auto-MDIX Fast Ethernet RJ-45 ports Compliant with IEEE 802.3 / IEEE 802.3u standards IEEE 802.3x Flow Control support Provide 1K MAC address entries Compliant with Windows, Linux, and Mac Operating Systems. Store-and-Forward Switching method Non-blocking Architecture Diagnostic LEDs Plug & Play
Intelligent 10/100Base-TX to 100Base-FX Single Mode SC Fiber Converter TFC-110S60i (Version A1.1R) SC-type single-mode fiber port connects over distances of up to 60km 10/100Base-TX port supports Auto-Negotiation, Auto-MDIX and Full-Duplex mode Supports port level SNMP management Functions as a stand alone converter or with the TFC-1600 fiber chassis The TFC-110S60i Intelligent Fiber Converter works with the TFC-1600 chassis system or as standalone unit. This converter is a Single Mode SC-Type fiber converter that supports SNMP management and spans distances of up to 60km (37.2 miles). Ports include 1 x 10/100Base-TX (RJ-45) port and 1 x 100Base-FX fiber port (SC-Type). Compliant with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX / 100Base-FX standards One 10/100Base-TX auto-negotiation RJ-45 port Auto MDIX for 10/100Base-TX port and one 100Mbps fiber port with single-mode SC-type connector Provides Dip switch to set: Fiber (FDX/HDX), Ethernet (Forced/Auto-Negotation), Ethernet Speed (10M/100M), LLR (Enable/Disable), LLCF (Enable/Disable) Half / Full-Duplex mode selector on Fiber port Support LLCF (Link Loss Carry Forward, Link Pass Through) Support LLR (link Loss Return) for FX port Monitor and configure Ethernet or Fiber’s duplex mode, speed, LLCF, LLR, and receive link down information via management module (TFC-1600MM) and chassis (TFC-1600) Status LED indicators for Power, Link/Activity, Full-Duplex, Link Fail, and Speed Wall-Mountable Optional 19” system chassis with redundant power supply (TFC-1600), holds up to 16 TFC series Media Converters 3-year limited warranty
Manufacturer: Remax Product code: L200 Color: Black Remax is a modern and high quality premium brand from Korea which is covering a wide range of the most important accessories for mobile phones and mobile devices . All Remax products combines the reliability and durability, which managed to get through attention to the selection of the highest quality materials and components. Remax products has bright and original design and technical solutions, which makes these products unique, and nothing can compare with them. This Product is Compatible with: All Audio Devices with support AUX 3,5mm Audio jack connection type - male-male Cable type: AUX 3,5mm Male to 3,5mm Male Cable Length: 2m Packed in Remax Blister Package Designed in Hong Kong. Made in China. Manufacturer warranty: 12 months.
The 5-Port Gigabit PoE+ Switch, model TPE-TG50g, delivers data and power over existing Ethernet cables to Power over Ethernet (PoE) devices such as Access Points and IP Cameras. It supports both PoE (802.3af) and PoE+ (802.3at) devices with a 31 Watt PoE budget. Plug and Play this sturdy metal switch for reliable high speed PoE networking.4 x Gigabit PoE+ ports and 1 x Gigabit port31 Watt PoE budget10 Gbps switching capacitySturdy metal switchPlug and Play installationUse with TRENDnet's PoE Splitter to network and power non-PoE devices
TRENDnet’s 5/7 dBi Outdoor Dual Band Omni Antenna Kit, model TEW-AO57, comes with a pair of high performance outdoor antennas which support 2.4 and 5 GHz radio transmissions. The omni-directional antennas provide blanket wireless coverage and have N-Type male connectors. The antennas work with 802.11ac/n/g/b/a routers and access points with N-Type female connectors.- Antenna KitComes with a pair of outdoor antennas- OutdoorDurable antenna construction for extreme outdoor conditions- Omni-DirectionalOmni-directional antennas for blanket wireless coverage- Dual Band Support (2.4 + 5 GHz)Compatible with 802.11ac/n/g/b/a routers and access points- Antenna Gain2.4 GHz peak gain: 5 dBi, 5 GHz peak gain: 7 dBi- N-Type ConnectorN-Type male connectors are compatible with routers and access points with N-Type female connectors* Effective wireless coverage may vary depending on the wireless device's output power, antenna gain, antenna align-ment, receiving sensitivity, and radio interference. Additionally environmental factors such as weather conditions, physical obstacles, and other considerations may affect performance. For optimal results, we recommended consulting a professional installer for site survey, safety precautions, and proper installation.Antennivõimenduse tase (maksimaalne)7 dBiSagedusriba2.4 - 2.5 / 5.1 - 5.875VõrgustandardidIEEE 802.11a,IEEE 802.11ac,IEEE 802.11b,IEEE 802.11g,IEEE 802.11nAntenni võimendus (2,4 GHz)5 dBiAntenni võimendus (5 GHz)7 dBiNäivtakistus50 ΩHorisontaalse kiire laius360°Vertikaalse kiire laius30°Antenni tüüpOmni-directional antennaAntennipistmiku tüüpN-tüüpiSuguMalePolariseerimineVertikaalne polarisatsioonSeisulaine suhe (VSWR)2.0 max.: 1Võimsuskäsitlus2 WOtstarveHoonevälineÜhilduvad tootedCompatible with 802.11ac/n/g/b/a routers and access points with N-Type female connectorsToote värvValgeRoHS-vastavusJahKasutamistemperatuur (T-T)-40 - 70 °CLaius22 mmKõrgus178 mmKaal58 gKogus2
