Ethernet Surge Protector Gen2 - It's an updated version of the original ETH-SP. Improves the surge protection performance significantly.ESD Protection for Outdoor PoE DevicesDamaging electrostatic discharge attacks and surges are diverted to the ETH-SP-G2 and safely discharged into the ground, so network devices are protected.Additional ESD ProtectionAll Ubiquiti® airMAX® devices are equipped with built-in ESD protection, so the ETH‑SP-G2 adds another layer of protection to your outdoor, high-speed network.Plug and Play InstallationConnect the ground and Ethernet cables in between your network devices.
24 10/100/1000Mbps portsInnovative energy-efficient technology saves power up to 20%Supports MAC address self-learning, Auto MDI/MDIX and Auto negotiationPlug & play designThe TL-SG1024D 24-Port Gigabit switch provides an easy way to make the transition to Gigabit Ethernet. All 24 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the TL-SG1024D can save up to 20%* of the power consumption, making it an eco-friendly solution for your business network.
The Ubiquiti Unifi U7-PRO Wifi-7 is a cutting-edge access point designed for ceiling mounting, featuring Power over Ethernet Plus (PoE+) for easy installation and a 2.5 Gigabit Ethernet port for ultra-fast data transfer. Ideal for businesses seeking robust and high-speed wireless connectivity.
Deco X10 on AX1500 terviklahendusega silmusvõrk (mesh) Wi-Fi 6 süsteem, mis pakub kiiret ja stabiilset internetiühendust kogu kodus. See suudab ühendada rohkem seadmeid ning tagab sujuva ja katkestusteta katvuse tänu Wi-Fi 6 tehnoloogiale. • Wi-Fi 6 kiirus kuni 1500 Mbps • OFDMA ja MU-MIMO tehnoloogia • Sujuv kogu kodu katvus (kuni 520 m 2 ) • Väga madal latentsus • Ühtne võrk • Tugevad vanemlikud kontrollid • Lihtne seadistamine Deco rakendusega
Ubiquiti U-PoE++ on suure võimsusega Gigabit Power over Ethernet (PoE) injektor, mis on spetsiaalselt loodud pakkuma kuni 60W toidet nõudlikele võrguseadmetele. Selle usaldusväärne jõudlus, ülepinge kaitse ja universaalne sisend muudavad selle ideaalseks lahenduseks selliste seadmete jaoks nagu juurdepääsupunktid, IP-kaamerad ja muud võrguseadmed, mis vajavad suurt energiatarbimist.Peamised omadused:Kompaktne ja vastupidav disain: Mõõtmetega 106 x 63 x 34 mm ja kaaluga 210 g, see injektor on nii kompaktne kui ka vastupidav erinevatele paigalduskohtadele.60W PoE toide: Toetab 4-paarilist toiteedastust, pakkudes kuni 60W toidet, tagades stabiilse toitevarustuse suurte energiavajadustega seadmetele.Gigabitine LAN-port: Varustatud Gigabit Etherneti pordiga, mis tagab kiire andmeedastuse koos toite edastamisega.Kõrge efektiivsus: Efektiivsusega 85+% tagab U-PoE++ minimaalse energiakao ja pideva töökindluse.Ülepinge kaitse: Täiustatud klambri kaitse nii andme- kui toiteühendustele, maksimaalse ülepinge mahalaadimisega kuni 1500A, kaitstes ühendatud seadmeid.Universaalne AC sisend: Ühildub globaalsete toitenormidega, toetades 100—240V AC @ 50/60Hz.Tehnilised andmed:Väljundpinge: 48V DC @ 1.25ASisendvool: 1.3A @ 120V AC / 0.75A @ 230V ACSisselülitusvool:
Powerful Dual LTE Cat 6 router is designed for mission critical applications. Two simultaneously operational LTE CAT 6 modems can provide speeds up to 600 Mbps with load balancing feature. This makes this device irreplaceable in applications where loosing connection is not an option. Two LTE modules working simultaneously can provide speeds up to 600 Mbps Instant failover switching 5 x Gigabit Ethernet with speeds up to 1000 Mbps Wave-2 802.11ac Dual Band WiFi with speeds up to 867 Mbps Teltonika Remote Management System compatible Easy to use, secure and feature rich OpenWrt based Operating System
The TFC-110MST Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Multi Mode ST-Type fiber converter spanning distances up to 2km (1.2 miles). Ports include 1 x 10/100Base-TX (RJ-45) port and 1 x 100Base-FX fiber port (ST-Type).ST-type multi-mode fiber port connects over distances of up to 2km (1.2 miles)10/100Base-TX port supports Auto-Negotiation, Auto-MDIX and Full-Duplex modeFunctions as a stand alone converter or with the TFC-1600 fiber chassis
1000Base-T 1 1000Base-LX 1 SC 1 RJ45 1 Cable distance 10km Power supply requirements 7.5V DC, 1A external power adapter Shipping box quantity 1 Unit Brutto Volume 0,001752 cubm Unit Net Weight 0,354 kg Unit Gross Weight 0,526 kg
1000Base-T 1 1000Base-LX 1 SC 1 RJ45 1 Cable distance 10km Power supply requirements 7.5V DC, 1A external power adapter Shipping box quantity 1 Unit Brutto Volume 0,001752 cubm Unit Net Weight 0,354 kg Unit Gross Weight 0,523 kg
Intelligent 1000Base-T to 1000Base-LX Dual Wavelength Single Mode SC Fiber (40 km / 24.85 miles) TFC-1000S40D3 (Version C1.1R) Must use with TFC-1000S40D5 SC-type dual-wavelength single-mode fiber port connects over distances of up to 40 km (24.85 miles) 1000Base-T Gigabit copper port supports Full-Duplex mode Supports port level SNMP management Functions as a stand alone converter or with the TFC-1600 fiber chassis The TFC-1000S40D3 Bi-Directional Intelligent Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Dual Wavelength Single Mode SC-Type fiber converter that supports port-based SNMP reporting and spans distances up to 40 km (24.85 miles). This module must be used with the TFC-1000S40D5 module. Ports include 1 x 1000Base-T (RJ-45) port and 1 x 1000Base-LX (SC Simplex Type) port. Compliant with IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX standards 1 x 1000Base-T RJ-45 port 1 x 1000Base-LX single-mode bi-directional simplex-SC type fiber port Provides Dip switch to set: Fiber (Forced / Auto-Negotiation), LLR (Enable / Disable) Support LLCF (Link Loss Carry Forward, Link Pass Through) Support LLR (Link Loss Return) for FX port Monitor and configure Ethernet or Fiber’s duplex mode, LLR, port on / off and receive link down information via management module TFC-1600MM and chassis TFC-1600 Status LED indicators for Power and Link / Activity Wall mountable Optional 19” system chassis with redundant power supply (TFC-1600), holds up to 16 TFC series Media Converters 3-year limited warranty
802.11b/g/n USB Nano wireless adapter Compatible with 802.11b/g/n, up to 300 Mbps network data transfer rate in 802.11n mode Ad-hoc and Infrastructure operation modes. WEP, WPA, WAP2 encryption support Ultra small design (34.4 mm x 18 mm x 7.7 mm)
Peab kasutama koos TFC-1000S40D3-ga. SC-tüüpi kahe lainepikkusega ühemoodiline kiudoptiline port ühendab kuni 40 km (24,85 miili) kaugusele. 1000Base-T Gigabit vaskport toetab täisdupleksrežiimi Toetab pordi tasandi SNMP-haldust Toimib iseseisva muundurina või koos TFC-1600 kiudoptilise šassiiga TFC-1000S40D5 kahesuunaline intelligentne kiudkonverter töötab koos TFC-1600 šassiisüsteemiga või iseseisva seadmena. See muundur on kahe lainepikkuse ühe režiimiga SC-tüüpi kiudkonverter, mis toetab pordipõhist SNMP-aruandlust ja ulatub kuni 40 km (24,85 miili) kaugusele. Seda moodulit tuleb kasutada koos mooduliga TFC-1000S40D3. Pordid on 1 x 1000Base-T (RJ-45) port ja 1 x 1000Base-LX (SC Simplex-tüüpi) port. Vastab standarditele IEEE 802.3ab 1000Base-T ja IEEE 802.3z 1000Base-LX. 1 x 1000Base-T RJ-45 port 1 x 1000Base-LX ühemoodiline kahesuunaline simplex-SC-tüüpi kiudoptiline port Pakub Dip lüliti seadistamiseks: Fiber (Forced / Auto-Negotiation), LLR (Enable / Disable). Toetab LLCF (Link Loss Carry Forward, Link Pass Through). Toetab LLR (link Loss Return) FX-porti jaoks. Jälgib ja konfigureerib Ethernet või Fiber'i dupleksrežiimi, LLR, port on / off ja saab link down teavet juhtimismooduli TFC-1600MM ja šassii TFC-1600 kaudu. Toite ja ühenduse / aktiivsuse oleku LED-indikaatorid Seinale paigaldatav Valikuline 19-tolline süsteemikere koos üleliigse toiteallikaga (TFC-1600), mahutab kuni 16 TFC-seeria meediamuundurit.
Intelligent 1000Base-T to 1000Base-LX Single-Mode SC Fiber Converter (50km/31miles) TFC-1000S50 (Version C1.0R) SC-type single-mode fiber port connects over distances of up to 50km (31 miles) 1000Base-T Gigabit copper port supports Full-Duplex mode Supports port level SNMP management Functions as a stand alone converter or with the TFC-1600 fiber chassis The TFC-1000S50 Intelligent Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Single Mode SC-Type fiber converter that supports SNMP and spans distances up to 50km (31miles). Ports include 1 x 1000Base-T (RJ-45) port and 1 x 1000Base-LX (SC-Type) port. Compliant with IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX standards 1 x 1000Base-T RJ-45 port 1 x 1000Base-LX single-mode SC type fiber port Provides Dip switch to set: Fiber (Forced/Auto-Negotiation), LLR (Enable/Disable) Support LLCF (Link Loss Carry Forward, Link Pass Through) Support LLR (link Loss Return) for Fiber port Monitor and configure Ethernet or Fiber’s duplex mode, LLR, port on/off and receive link down information via management module TFC-1600MM and chassis TFC-1600 Status LED indicators for Power and Link/Activity Wall mountable Optional 19” system chassis with redundant power supply (TFC-1600), holds up to 16 TFC series Media Converters 3-year limited warranty
The TFC-1000S70 Intelligent Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Single Mode SC-Type fiber converter that supports SNMP and spans distances up to 70km (43.5 miles). Ports include 1 x 1000Base-T (RJ-45) port and 1 x 1000Base-LX (SC-Type) port.Andmeedastuskiirus (maksimaalne)1000 Mbit/sKaabeldustehnoloogia1000Base-T, 1000Base-LXLainepikkus1300 nmLED-indikaatoridVõimsusVõimsustarve (tüüpiline)7,2 WKasutamistemperatuur (T-T)0 - 40 °CHoiustamistemperatuur (T-T)-25 - 70 °CSuhteline õhuniiskus kasutamisel (H-H)10 - 90 protsentiSuhteline õhuniiskus (H-H) hoiustamisel5 - 90 protsentiAndmelüli protokollidCSMA/CDPistmik(ud)SC
D-SUB kestad on loodud D-SUB pistikute kaitseks ja pingevähenduseks. Neil on 9-positsiooniline disain, plastkorpus metallkattega vastupidavuse tagamiseks ning sirge kaabli sisseviik lihtsaks kaabli sisestamiseks. Kruvi võimaldab turvalist ja reguleeritavat kaabli kinnitust.Põhikirjeldus:Tüüp: D-SUB katePositsioonid: 9Materjal: Plastik, metallkattegaKaabli sisseviik: SirgeKinnituse mehhanism: KruviKeerme tüüp: UNC 4-40Need D-SUB korgid sobivad ideaalselt rakendustele, mis vajavad kaitset ja pingevähendust D-SUB pistikute jaoks erinevates elektroonilistes ja tööstuslikes keskkondades.
