LTU-ROCKET Ubiquiti introduces the LTU Rocket®, the first Point-to-Multi-Point (PtMP) BaseStation radio in LTU™ product family. Operating in the 5 GHz frequency band, the LTU Rocket is a spectrally efficient, noise-resilient PtMP AP specifically designed for wireless ISPs (WISPs).Incorporating Ubiquiti’s proprietary LTU technology, the LTU-Rocket is a Point-to-MultiPoint (PtMP) 5 GHz Access Point featuring 2+ Mpps processing, proprietary RF filtering, and flexible GPS sync for superior performance. Channel width flexibility (10/20/30/40/50 MHz) allows independent TX and RX channel frequency configurations anywhere within the radio band to avoid local interference. A custom co-processor is included for future performance and feature upgrades. Functions in a PtMP environment using the LTU-Pro, LTU-Lite for subscriber stations.Primary features of the LTU Rocket include:• 600+ Mbps PtMP performance(1)• Up to 64 client connections per AP(2)• 2+ Million pps• Proprietary RF filtering (1) 1+ Gbps with future firmware upgrade. (2) 255 client connections with future firmware upgrade. Superior PerformanceLTU is a new, proprietary technology with custom silicon and radio design that break through the limitations of 802.11 Wi-Fi technology. This enables LTU to deliver far superior performance over previous airMAX products that are based on 802.11 Wi-Fi.The LTU Rocket is designed for WISPs from the ground floor up. Its core communications processing engine enables low latency, long-range capability, DFS flexibility, higher constellations, better power output, and improved receive sensitivity.Seamless CompatibilityThe LTU Rocket is designed to be paired with a variety of Ubiquiti antennas to suit the needs of each installation. The radio includes a mounting bracket that allows it to be used with a 5 GHz airMAX® Sector antenna or airMAX Omni antenna for a complete 5 GHz PtMP BaseStation. You can even pair three LTU Rocket radios with the airPrism® 5 GHz 3x30° HD Sector Antenna for co-location deployments.The LTU Rocket also works with any CPE device in the LTU family, such as the LTU-Pro.
8 x Fast Ethernet porti 1,6 Gbps kommutatsioonivõimsus Edasisaatmiskiirus: (64 baidi suuruste pakettide puhul). Kaitsekindla IP30-klassi metallist lüliti Sisaldab DIN-riba ja seinakinnituse klambreid Lai töötemperatuurivahemik -40° - 75° C (-40° - 167° F) Kaks sisendit tagavad üleliigse voolu kaitsega redundantse toiteallika Häirerelee, mis käivitub voolukatkestuse korral Toiteplokk müüakse eraldi (mudel: TI-M6024) Ventilaatorita disain tagab vaikse töö
CAT6 UTP Flat Patch CableVention CAT6 flat patch cords are a great solution for how to hide ethernet cables in tight spaces where regular CAT6 patch cord is too bulky. Flat fully molded cord gives a neat appearance to desktops & wall outlets.Vention CAT6 Flat Patch Cord is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates. These cables deliver improved performance over standard CAT5E cables.CAT6 is completely backward-compatible with current CAT5 CAT5E equipment. Vention CAT6 Flat Patch Cords are composed of 4 pairs 32AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard.Used to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Virtually eliminates alien crosstalk and interference.Performance rated beyond 250 MHz.
CAT6 UTP Flat Patch CableVention CAT6 flat patch cords are a great solution for how to hide ethernet cables in tight spaces where regular CAT6 patch cord is too bulky. Flat fully molded cord gives a neat appearance to desktops & wall outlets.Vention CAT6 Flat Patch Cord is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates. These cables deliver improved performance over standard CAT5E cables.CAT6 is completely backward-compatible with current CAT5 CAT5E equipment. Vention CAT6 Flat Patch Cords are composed of 4 pairs 32AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard.Used to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Virtually eliminates alien crosstalk and interference.Performance rated beyond 250 MHz.
CAT6 UTP Patch CableVention CAT6 Patch Cord is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates. These cables deliver improved performance over standard CAT5E cables.CAT6 is completely backward-compatible with current CAT5 CAT5E equipment. Vention CAT6 Patch Cords are composed of 4 pairs 26AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard.Used to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Virtually eliminates alien crosstalk and interference.Performance rated beyond 250 MHz.
CAT8 SSTP Patch CableVention CAT8 cables are capable of reaching up to 40Gbps transfer speeds and up to 2000MHz bandwidth. These CAT8 patch cords consist of 4 pairs 28 AWG stranded copper conductors and RJ45 connectors. Cat.8 patch cables are backwards compatible with CAT5E CAT6 CAT6A and CAT7.Used to connect your network device to any of the following: 40GBASE-T Gigabit Ethernet 25GBASE-T Gigabit Ethernet 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet CAT8 Performance for a 10GBASE-T 25GBASE-T or a 40GBASE-T channel compliant network up to 30 meters; 10Gbps support up to 100 meters. Optimize the distance and power in high density networking End of Row (EOR) Top of Rack (TOR) or Middle of Row (MOR) configurations at the data center. Cat 8 supports interconnect topologies that are limited to 2 connections in a 30 meter channel for 25Gbps or 40Gbps network speeds.Vention CAT8 patch cord provides a lower cost alternative than OM3 fiber connections under 30 meters or a SFP+ twin-axial connection under 5 meters; Cat 8 Ethernet cable supports auto-negotiation for compatibility with mixed network server speeds from 1 Gbps to 40 Gbps.The superior Shielded design of this Cat 8 cable includes individually foil-shielded bare copper connectors encased in a overall steel braid; fully shielded metal connectors have gold-plated RJ45 contacts and a snag-less boot with molded strain relief; Tested to support up to 2000 MHz (2 Ghz) that is 4x the frequency of Cat 6A cable or Cat7 cable.
• 250 Watt power supply unit • Improved failover of the LANCOM XS-5116QF, LANCOM XS-6128QF, LANCOM GS-4554X, or LANCOM GS-4530X • Hot-swappable – can be inserted during operation • Input voltage: 110 VAC and 230 VAC • Output voltage: 12 V @20 A • Over current protection • Over voltage protection • Over temperature protection • Operating temperature: 0°C to 50°C • Not suitable for operation in ambient temperatures below -40°C and above 70°C
PLANET IGS-1600T Industrial high-density 16-port 10/100/1000T Gigabit Ethernet Switch is equipped with a rugged IP30 metal case for stable operation in heavy industrial demanding environments. Thus, the IGS-1600T provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curbside traffic control cabinets. Industrial-grade, Flexible and Environmentally-hardened Design The IGS-1600T possesses an integrated power supply source with a wide range of voltages (12 to 48V DC or 24V AC) for worldwide high availability applications requiring dual or backup power inputs. Being able to operate under wide temperature range from -40 to 75 degrees C, the IGS-1600T can be placed in almost any difficult environment. The IGS-1600T also allows either DIN rail or wall mounting for efficient use of cabinet space. Robust Protection The IGS-1600T provides a contact discharge of ±6KV DC and air discharge of ±6KV DC for Ethernet ESD protection. It also supports ±6KV surge immunity to improve product stability and protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate. Dual Power Input for High Availability Network System The IGS-1600T features a strong dual power input system with wide-ranging voltages (12V~48V DC or 24V AC) incorporated into customer’s automation network to enhance system reliability and uptime. In the example below, when power supply 1 fails to work, the hardware failover function will be activated automatically to keep powering the IGS-1600T via power supply 2 alternatively without any loss of operation. Energy Savings The IGS-1600T, integrated with advanced green networking technologies and IEEE 802.3az protocol based power savings, is able to provide power savings of up to 50% but maintain high performance efficiently. Link Down power savings The Link Down power savings goes beyond IEEE specifications to automatically lower power consumption for a given port when it is not linked. With the Link Down power saving technology, the IGS-1600T will automatically adjust power usage of the ports that are shut down or not connected to network device. Intelligent power scale based on cable length Intelligent power scale is an intelligent algorithm that actively determines the appropriate power level based on cable length. When the IGS-1600T is connected with Ethernet cable shorter than 20m, a device can obtain maximum power savings because the IGS-1600T would automatically detect the Ethernet cable length and diminish power usage. The connected device can substantially reduce the overall power consumption, which makes a significant contribution to energy savings. Industrial-grade Switch for Building Automation and Security Suitable for buildings where security is strictly enforced, the IGS-1600T, with sixteen Gigabit Ethernet Switch interfaces, can easily build an infrastructure with an IP phone system, IP surveillance system, and wireless AP group in the harsh Industrial environment. Designed for Heavy Industries The IGS-1600T’s IP30-rated metal case is particularly designed for heavy industries, such as factories, harbors, warehouses, and more. When installed at these establishments, it can enhance the work performance of these establishments by speedily transferring incoming and outgoing data.
PLANET IGTP-815AT on väikseim tööstusliku klassi gigabitine PoE+ meediakonverter, millel on üks 100/1000BASE-X SFP optikaport ja üks 10/100/1000BASE-T 802.3at PoE+ vaskport IP30-klassi karmides, kuid kompaktses korpuses. Tänu võimele töötada temperatuurivahemikus -40 kuni 75 kraadi C, pakub IGTP-815AT usaldusväärset, stabiilset ja pidevat pikkmaagali andmeedastust ning seda saab paigaldada mis tahes karmides keskkondades ilma ruumi arvestamata.Kuna IIoT (Industrial Internet of Things) infrastruktuuri järele nõudlus järjest kasvab, on IGTP-815AT spetsiaalselt loodud selleks, et muuta tööstusvõrgu hõlpsaks kasutuselevõtuks, kuna see on varustatud Plug and Play funktsiooniga. Peale selle on see kiire andme- ja toiteedastuse osas stabiilne ja usaldusväärne.IEEE 802.3at PoE PlusVastavalt IEEE 802.3at Power over Ethernet Plus (PoE+) standardile edastab IGTP-815AT gigabitise kiirusega Etherneti andmeedastust ja pakub kuni 36-vatist võimsust üle täiendava 100 m UTP kaabli 802.3af/at PoE PD-le (powered device), mis on paigaldatud kaugsesse piirkonda, kus nõutakse piisavat ja usaldusväärset toitepinget. Kasutajad saavad hõlpsasti uuendada oma olemasolevaid võrke ilma tarkvarakonfiguratsiooni vajaduseta.Optilise kaabli ühenduse võimalus laiendab võrgu kasutuselevõtu ulatustPoE PSE (power sourcing equipment) ja PD vahelise maksimaalse kauguse Etherneti UTP kaabli kaudu on 100 meetrit. PoE kasutuselevõtu ulatuse paindlikuks laiendamiseks võib IGTP-815AT SFP-pesa, mis toetab 100BASE-FX/1000BASE-X, SFP-mooduleid ja muud, saavutada edastuskauguse kuni 120 km.Interaktiivne võrgu tuvastamineIGTP-815AT toetab LFP (Link Fault Passthrough) funktsiooni sisseehitatud DIP-lüliti kaudu. LFP-funktsioon sisaldab Link Loss Carry Forward (LLCF) ja Link Loss Return (LLR):LLCF tähendab, et kui konverteriga ühendatud seade ja TP-liin kaotavad ühenduse, katkestab konverteri optikaport edastuse ühenduse.LLR tähendab, et kui konverteriga ühendatud seade ja optikaabel kaotavad ühenduse, katkestab konverteri optikaport edastuse ühenduse.
Robustly Designed for Critical Business Applications Designed to be installed in heavy industrial demanding environments, the IGS-4215-8T2S is the new member of PLANET Industrial-grade, DIN-rail type L2/L4 Managed Gigabit Switch family to improve the availability of critical business applications. It provides IPv6/IPv4 dual stack management and built-in L2/L4 Gigabit switching engine along with 8 10/100/1000BASE-T ports, and 2 extra 100/1000BASE-X SFP fiber ports for data and video uplink. The IGS-4215-8T2S is able to operate reliably, stably and quietly in any hardened environment without affecting its performance. It comes with operating temperature ranging from -40 to 75 degrees C in a rugged IP30 metal housing. Environmentally Hardened Design With the IP30 industrial case, the IGS-4215-8T2S provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets without air conditioner. Being able to operate under the temperature range from -40 to 75 degrees C, the IGS-4215-8T2S can be placed in almost any difficult environment. Robust Protection The IGS-4215-8T2S provides contact discharge of ±6KV DC and air discharge of ±8KV DC for Ethernet ESD protection. It also supports ±4KV surge immunity to improve product stability and protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate. Redundant Ring, Fast Recovery for Surveillance System The IGS-4215-8T2S supports redundant ring technology and features strong rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In certain simple Ring network, the recovery time of data link can be as fast as < 450ms. Robust Layer 2 Features The IGS-4215-8T2S can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN, Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), loop and BPDU guard, IGMP snooping, and MLD snooping. Via the link aggregation, the IGS-4215-8T2S allows the operation of a high-speed trunk to combine with multiple ports such as an 8Gbps fat pipe, and supports fail-over as well. Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2 protocol included to help discover basic information about neighboring devices on the local broadcast domain. IPv6/IPv4 Dual Stack Management Supporting both IPv6 and IPv4 protocols, the IGS-4215-8T2S helps the SMBs to step in the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up. Efficient Traffic Control The IGS-4215-8T2S is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast/multicast/unicast storm control, per port bandwidth control, 802.1p/CoS/IP DSCP QoS priority and remarking. It guarantees the best performance in VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources. User-friendly and Secure Management For efficient management, the IGS-4215-8T2S is equipped with Command line, Web and SNMP management interfaces. With the built-in Web-based management interface, the IGS-4215-8T2S offers an easy-to-use, platform-independent management and configuration facility. For text-based management, it can be accessed via Telnet and SSHv2 protocol. For standard-based monitor and management software, it offers SNMPv3 connection which encrypts the packet content at each session for secure remote management. . Powerful Security from Layer 2 to Layer 4 PLANET IGS-4215-8T2S offers comprehensive IPv4/IPv6 Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1X port-based user and device authentication, which can be deployed with RADIUS to ensure the port level security and block illegal users. With the Protected Port function, communication between edge ports can be prevented to guarantee user privacy. Furthermore, Port Security function allows limiting the number of network devices on a given port. Advanced Network Security The IGS-4215-8T2S also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before. Flexibility and Long-distance Extension Solution The two additional SFP slots built in the IGS-4215-8T2S support 100BASE-FX /1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceivers to uplink to backbone switch in long distance. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and up to 120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.   Intelligent SFP Diagnosis Mechanism The IGS-4215-8T2S supports SFP-DDM (Digital Diagnostic Monitor) function that can easily monitor real-time parameters of the SFP for the network administrator, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. Industrial-grade Switch for Building Automation and Security Suitable for buildings where security is strictly to be enforced, the IGS-4215-8T2S, with eight high-speed Gigabit Ethernet interfaces, can easily build a power centrally controlled for an IP phone system, IP surveillance system, and wireless AP group in the harsh Industrial environment. Model that Withstands Harsh Operation and Extends Distance The IGS-4215-8T2S is made to withstand any harsh operation in such environments as traffic control cabinets, factory floors, and indoor and outdoor locations where temperatures are extremely high or low. With a non-blocking design and compact size, the installation of the IGS-4215-8T2S is easy and helpful to build a Gigabit high-bandwidth switched network quickly.
Converts a non-PoE port to a PoE++ Gigabit port Supplies PoE (15.4W), PoE+ (30W), or PoE++ (95W) Integrated power supply Network a PoE device up to 100m (328 ft.) away Save on installation and equipment costs IEEE 802.3af/at/bt compliant
8 x Gigabit PoE+ ports 2 x Gigabit ports 2 x SFP slots 110W PoE power budget Easy-to-use web-based management interface Supports IPv6, LACP, VLAN, QoS, and IGMP Snooping Extend PoE+ signal up to 656 ft./200m at 10Mbps Front panel 4-digit LED display provides PoE power statistics Surveillance mode GUI for simplified configuration and network monitoring Device discovery for ONVIF compliant IP cameras and NVRs Upload building floorplans to create an E-map of surveillance devices Change IP camera IP address settings Upgrade IP camera firmware Change IP camera administrator user name and password Bandwidth control per port 802.1Q, MAC, Surveillance, and Voice VLAN support IEEE 802.1p QoS with queue scheduling support 24Gbps switching capacity IEEE 802.1p QoS with queue scheduling support TRENDnet's Gigabit PoE+ Smart Surveillance Switch series is designed to simplify the installation and management of surveillance networks, especially for integrators and installers. These ONVIF switches are optimized for the surveillance industry; surveillance mode provides a graphical dashboard interface with detailed information about the switch and each connected PoE device. Connect ONVIF compliant IP cameras and NVRs for more advanced capabilities such as changing device IP settings, and to view individual IP camera video within the switch GUI. The Smart Surveillance Switches are also PoE self-healing switches featuring PoE device auto-recovery and power scheduling. Installers and integrators can save on equipment costs and reduce installation time with TRENDnet's Gigabit PoE+ Smart Surveillance Switches by delivering up to 30W per port of PoE power and data over existing Ethernet cables. Available PoE port controls include enabling and disabling PoE, PD alive check, and power scheduling. PD alive check is an automated PoE self-healing switch feature that attempts to recover an unresponsive PoE device connected to the switch. If a PoE device such as a PoE camera becomes unresponsive to pings, the ONVIF compliant switch will auto-reboot the PoE port in attempt to recover the device. These PoE+ ONVIF switches feature a 4-digit LED display showing total PoE power, available power, and power-per-port. They also support long distance PoE+ networking up to 656 ft./200m away at speeds up to 10mbps. TRENDnet's Gigabit PoE+ Smart Surveillance Switches also feature SFP slots to support long-distance fiber networking applications. Advanced managed switch features include LACP to group ports together to increase bandwidth between switches, VLANs for segmenting and isolating virtual LAN groups, QoS for traffic prioritization, port bandwidth controls, and SNMP monitoring, making this ONVIF switch a powerful SMB network solution. Improve voice performance by isolating and prioritizing VoIP traffic from normal data traffic with the easy-to-use voice VLAN feature. Smart Surveillance Management These managed ONVIF switches are optimized for the surveillance industry; surveillance mode provides a graphical dashboard interface with detailed information about the switch and each connected device. Integration Flexibility Managed switch features include access control lists, VLAN, IGMP snooping, QoS, RMON, SNMP, and syslog for monitoring and flexible network integration. PoE Device Alive Check PD alive check is an automated PoE self-healing switch feature that attempts to recover an unresponsive PoE device connected to the switch. If a PoE device such as a PoE camera becomes unresponsive, the ONVIF compliant switch will auto-reboot the PoE port in attempt to recover the device. Hardware Design Provides gigabit PoE+ ports, SFP slots for fiber connectivity, and a 1U 19” rackmount design with brackets included PoE Power Each PoE+ managed ONVIF switch supplies up to 30W of power per port and data over a single Ethernet cable to PoE devices Surveillance Mode ONVIF switches are optimized for the surveillance industry, proving a graphical dashboard interface with useful information about the switch and each connected device Long Range PoE+ Long distance PoE+ networking up to 656 ft./200m away at speeds up to 10mbps 4-Digit PoE LED Display 4-digit 7-segment LED display to view total power, available power, and power-per-port IPv6 Ready ONVIF switches support IPv6 configuration and IPv6 neighbor discovery Traffic Management Managed switch features include: Link aggregation, 802.1Q VLAN, Voice VLAN, Surveillance VLAN, RSTP, MSTP, Loopback Detection, QoS, and port bandwidth management Troubleshooting A convenient cable diagnostic test and traffic statistics aid in network troubleshooting Monitoring RMON, SNMP, and Port Mirroring support administrator monitoring solutions
See Delocki ergonoomilise disainiga pehme hiirematt toimib tänu oma randmetoele leevendavalt hiirega töötamisel. Tänu oma sujuvale täidisele lamab käsipall hiiremattil mugavalt. Spetsifikatsioon Paindlik pehme hiirematt randmetugi Kummeeritud põhi Mõõtmed (LxSxK): ca. 252 x 227 x 20 mm Kaal: ca. 99,5 g Värv: must Pakendi sisu Hiirealus
Seda Delocki kaablit kasutatakse jadaühenduse pikendamiseks ja seda saab kasutada erinevate D-Sub 9-poldilise pistiku abil ühendatud seadmete ühendamiseks. Spetsifikatsioon - Liitmikud: 1 x D-Sub 9-pin isane > 1 x D-Sub 9 pin emane - Kruvidega ühendused - Kaabli gabariit: 30 AWG - Pikkus koos pistikutega: ca. 5 m - Värv: beež Süsteeminõuded - Vaba 9-pooluseline D-Sub-liitmik
Seda Delocki sertifitseeritud DisplayPort-kaablit kasutatakse DisplayPort-liidesega seadmete, näiteks monitoride, projektorite või telerite ühendamiseks arvuti või sülearvutiga. Toetades maksimaalset ribalaiust 32,4 Gb/s, saab sisu kuvada 8K Ultra HD (7680 x 4320 @ 60 Hz) resp. 5K (5120 x 2880 @ 120 Hz) ja 4K Ultra HD (3840 x 2160 @ 240 Hz) resolutsioonis. Kvaliteetne, kolmekordselt varjestatud kaabel parandab oluliselt ka heliülekannete kvaliteeti, mille proovivõtusagedus on kuni 1536 kHz. Spetsifikatsioon - Ühendused: 1 x DisplayPort 20-poolne isane > 1 x DisplayPort 20-poolne isane - DisplayPort 1.4 spetsifikatsioon - ühildub DisplayPort 1.3, 1.2 ja 1.1 standardiga. - DisplayPort® DP 8K sertifitseeritud kaabel - Pin 20 ei ole ühendatud - Kaabli gabariit: 28 AWG - Kaabli läbimõõt: umbes 7,5 mm - Vaskjuht - Kolmekordselt varjestatud kaabel - Kontaktid kullatud - Audio- ja videosignaalide edastamine - Andmeedastuskiirus kuni 32,4 Gb/s - Resolutsioon kuni: DSC-toega ekraan: 7680 x 4320 @ 60 Hz 5120 x 2880 @ 120 Hz 3840 x 2160 @ 240 Hz Ekraan ilma DSC-toeta: 7680 x 4320 @ 30 Hz 5120 x 2880 @ 60 Hz 3840 x 2160 @ 120 Hz (sõltuvalt süsteemist ja ühendatud riistvarast) - Toetab Display Stream Compression 1.2 (DSC) - Toetab HDR - Toetab HDCP 1.4 ja 2.2 - Toetab HBR3 (8,1 Gb/s) andmesagedust - Kuni 32 audiokanalit kõlarite jaoks - Kuni 1536 kHz audio proovivõtusagedus - Toetab värvisamplereerimist 4:4:4, 4:2:2 ja 4:2:0 formaadis - Värv: must - Pikkus koos pistikutega (L): ca 3 m Süsteeminõuded - Vaba DisplayPort-liides Pakendi sisu - DisplayPort kaabel
This ergonomical designed soft mouse pad by Delock acts due to its wrist rest relieving when working with a mouse. With its smooth filling the ball of the hand lays comfortable on the mouse pad. Specification • Flexible soft mouse pad • Wrist rest • Rubberized bottom • Dimensions (LxWxH): ca. 245 x 206 x 20 mm • Weight: ca. 108 g • Colour: grey Package content • Mouse pad
See Delocki DisplayPort switch on käsitsi juhitav kahesuunaline lüliti erinevate seadmete ühendamiseks DisplayPort pordiga. See lüliti pakub kahte erinevat rakendust. 1. Kuni 2 seadet saab ühendada monitori, teleri või projektoriga. Nupulevajutusega saab valida seadme, mida ekraanil kuvatakse. 2. DisplayPort-seadet saab ühendada kuni 2 ekraaniga. Nupuvajutusega saab valida ekraani, millel signaali kuvatakse. Samaaegne väljund mitmele ekraanile ei ole võimalik. Märkus Kasutades videoallikas 20-poldilist Displayport-kaablit, saab lüliti toiteallikale anda. Spetsifikatsioon - Ühendused: Funktsioon 1 Sisend: DisplayPort 20-poolne emane 1 x 5 V DC pesa 1,35 x 3,5 mm Väljund: 1 x DisplayPort 20-poolne pistikupesa: 1 x DisplayPort 20-poolne pistikupesa Funktsioon 2 Sisend: 1 x DisplayPort 20-poolne pistikupesa: 1 x DisplayPort 20-poolne pistikupesa 1 x 5 V alalisvoolu pesa 1,35 x 3,5 mm Väljund: 2 x DisplayPort 20-poolne pistikupesa: 2 x DisplayPort 20-poolne pistikupesa - DisplayPort pordi valik nupu abil - Resolutsioon kuni 3840 x 2160 @ 60 Hz (sõltuvalt süsteemist ja ühendatud seadmest). riistvarast) - Plastikust korpus - Värv: must - Mõõtmed (LxSxK): ca. 82 x 62 x 17 mm Süsteeminõuded - Vaba DisplayPort-liitmik - DisplayPort kaabel - Toiteallikas, millel on vaba USB A-tüüpi port Pakendi sisu - Kahesuunaline switch - USB toitekaabel, pikkus: ca 1 m - Kasutusjuhend
The LHG XL HP5 is a 5GHz 802.11 a/n wireless device with an integrated dual polarization 27 dBi grid antenna and high TX output power, designed to reach up to 40km in point-to-point setups at full speed. The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables. 4PACK