The RBM33G is a fully featured RouterBOARD device perfect for using in your own enclosure or building a custom solution. It uses the same PCB form factor and same mounting holes as it’s predecessors (RB433 and RB953 series).The RBM33G features a new MediaTek two core CPU running at 880 MHz and 256 MB of DDR3 RAM and three Gigabit Ethernet ports. It is specially designed for setups that requires two 3G/LTE modems.You can use the device with e.g.:• two miniPCIe 3G/LTE modems (two SIM slots provided)• two miniPCIe wireless cards• one miniPCIe and one USB 3G/LTE modem leaving other miniPCIe slot for 802.11 wireless card (consult product Quick Guide for details).The included USB 2.0/3.0 port can be used either for 3G/LTE modem or an external hard drive (consult product Quick Guide for details). For expanding storage, microSD and a PCIe M.2 slots are provided. The RBM33G comes fitted with a RS232 serial port for console access. The device can be powered by PoE through it’s gigabit ethernet connector or through the DC power jack. Ethernet test results RBM33GMT7621A (880Mhz) 1G all port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)162.41,972.2443.71,817.41039.1532.0Bridging25 bridge filter rules162.41,972.2168.1688.5174.389.2Routingnone (fast path)162.41,972.2444.41,820.31035.0529.9Routing25 simple queues162.41,972.2179.6735.6171.487.8Routing25 ip filter rules92.91,128.294.1385.493.848.0
Tootja: Lanberg Tootegrupp: Installation võrguseade kaabel juhtme tüüp: CAT6 Category: 6 Lisaandmed: LAN kaabel category 6 UTP (unshielded) gelled väline. AWG 23 (4x2x0.57mm)., The wires are made of pure copper (CU 100% bare copper). , External PVC insulation pikkus: 305 m värv: must
To attach DIN rail adapter to the device: 1. Locate the groove for attaching adapter on the bottom of the device. 2. Line up smaller holes in the middle of DIN rail adapter with the groove on the device. 3. Secure adapter with two screws.
Tootja: Lanberg Tootegrupp: võrguseade plug | coupler | boots Type of plug, coupler: RJ45 (8P8C) Wiring type: CAT5e, Shielded Lisaandmed: Set of 100 tk of shielded RJ-45 [8P8C] Cat.5E võrguseade plugs, intended mainly, for FTP LAN kaablid. värv: Metal
5m SFP+ 10Gbps Active Optics direct attach cable. This is highly cost-effective way to connect two SFP/SFP+ devices for very short distances, within racks and across adjacent racks. It works with all our products with SFP/SFP+ ports, including new RB4011 series (RB4011 series are not compatible with our passive direct attach cables S+DA0001 and S+DA0003)
LTU-PRO Incorporating innovative industrial design with advanced technology, the LTU Pro is a Point-to-MultiPoint (PtMP) 5 GHz high-performance subscriber station. Based on Ubiquiti’s proprietary LTU technology, the LTU Pro is not impeded by the limitations of standard 802.11 Wi-Fi technology. It features an integrated high-gain dish for long range and high performance. Channel width flexibility (10/20/30/40/50 MHz) allows independent TX and RX channel frequency configurations anywhere within the radio band to avoid local interference. Features: PtMP CPE 1024 QAM 10/20/30/40/50 MHz channel bandwidth Central configuration management from AP side Frequency split Automatic power adjustments Router mode support Functions in a PtMP environment with the LTU-Rocket as the basestation. Featuring an integrated 24 dBi dish antenna, the LTU Pro is a 5 GHz subscriber station that functions as a CPE (Customer Premises Equipment) in a Point‑to‑MultiPoint (PtMP) environment with the LTU Rocket® as the basestation.Proprietary LTU Technology Based on Ubiquiti’s LTU technology, the LTU Pro is not impeded by the limitations of standard 802.11 Wi‑Fi technology. Its custom LTU silicon and radio architecture provide up to 600+ Mbps (1) of real TCP/IP throughput and modulation rates of up to 4096QAM (2). 1 1+ Gbps with future firmware upgrade.2 Available with future firmware upgrade. CPE Modes The LTU Pro supports both bridged and built-in hardware NAT router modes to suit your specific deployment. Frequency Split The LTU Pro can use different frequencies for TX and RX to avoid interference. Robust Pole Mount Design The LTU Pro is designed for quick yet reliable mounting on a pole. It features a built-in mechanical tilt; the mounting bracket allows convenient adjustments to the elevation with a range of ± 15°.
M1300 3-pack AC1200 Dual Band Whole Home Wi-Fi Mesh Wi-Fi AC1200 network 867 Mbps on the 5 GHz band and 300 Mbps on the 2.4 GHz band Seamless roaming, coverage throughout your home 2 Gigabit Ethernet ports Compatible with 15 additional DDNS providers PPTP/L2TP/OpenVPN/WireGuard/IPSec/Zerotier VPN
RUT140 on kompaktne tööstuslik Ethernet-marsruuter, mis suurendab turvalisust lõppseadmete võrguisolatsiooni abil. Varustatud kahe Ethernet-porti, DIN-riba klambri ja tööstusliku 3-poolse pistiku abil tagab see sujuva ühenduvuse ja lihtsa paigalduse. Marsruuter on varustatud RutOSi, Wi-Fi 4 ja toetab tööstusprotokolle, nagu Modbus, DLMS, DNP3 ja OPC UA, ning on ühilduv RMSiga tõhusaks kaug- ja kohapealseks haldamiseks.ÜHENDUS2 x 10/100 Mbit/s Ethernet-porti, Wi-Fi 4 TOITEPINGE1 x 3-poolne tööstuslikuks kasutamiseks kohandatud toitepistikupesaLIHTNE PAIGALDAMINELihtne paigaldus integreeritud DIN-riba klambrigaRMSKaugjuhtimine, juurdepääs ja VPN-teenused
TSW030 on kuluefektiivne haldamata Ethernet-kommutaator, millel on kaheksa 10/100 RJ45 porti ja integreeritud DIN-riba paigaldus. See kompaktne ja vastupidav 8-portiline kommutaator sisaldab 2-poolset toitesisendit ja madalat energiatarbimist, mis on kuni 0,5 W tühikäigul ja maksimaalselt kuni 1,5 W. Tänu sellele sobib see plug-and-play lüliti ideaalselt tööstuslikesse rakendustesse, kus on vaja ühendada kuni kaheksa seadet. 2-POOLNE TOITESISENDLihtne ja tööstusrakendustesse sobivMADAL ENERGIATARVETühikäigul kuni 0,5 W, maksimaalselt kuni 1,5 WINTEGREERITUD DIN-RÖÖPMELLihtne paigaldus plug-and-play kasutuselevõtuks8 X RJ45 PORTSKaheksa 10/100 Mbit/s Ethernet-porti
The TL-SG1048 is specially designed for Ethernet (10Mbps), Fast Ethernet (100Mbps) and Gigabit Ethernet (1000Mbps) with seamless link. Each port supports up to 2000Mbps throughput in full duplex mode. It is the perfect choice to improve the performance of Offices and workgroup networks. All ports support Full/half duplex transfer mode for 10Mbps/100Mbps and Full duplex transfer mode for 1000Mbps Supports Auto-MDI/MDIX function Supports IEEE 802.3X flow control for full-duplex mode and back pressure flow control for half-duplex mode Store and forward Switching scheme
Improved Noise ImmunityThe NanoBeam directs RF energy in a tighter beamwidth. With the focus in one direction, the NanoBeam blocks or spatially filters out noise, so noiseimmunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.Innovative Mechanical Design• Built-in mechanical tilt The mounting bracket conveniently offers 20° of uptilt and up to 20° of downtilt.• Quick assembly The number of fasteners was reduced to simplify assembly. Tools are required only when the technician mounts the NanoBeam on the pole.• Easy removal The antenna feed can be detached with the push of a button.Corrosion Resistance• Fasteners GEOMET®-coated for improved corrosion resistance when compared with zinc-plated fasteners.
D-Link DES-1016D/E. Switch type: Unmanaged. MAC address table: 8000 entries, Maximum data transfer rate: 0.1 Gbit/s. LED indicators: power. Internal memory: 2 MB. Data transfer rate: 100 Mbit/s, Dimensions (WxDxH): 324 x 231 x ...
MikroTik Antenna RouterBOARD Groove 52HPn - Radio access point - 100Mb LAN - 802.11a/b/g/n - Dual Band CPU Qualcomm Atheros AR9342 Internal Clock Rate 600 MHz RAM 64 MB Local Area Network Architecture 10Base-T/100Base-TX Uplink Port Type 1 x 10Base-T/100Base-TX Total Number of Ports 1 Data Link Protocol Supports Fast Ethernet/Ethernet IEEE 802.11a/b/g/n/ac Device Location External Wi-Fi Band Frequency 2.4 GHz/5 GHz Networking Features Power over Ethernet (PoE) Antenna External Radio Output Power 500 mW AC Adapter ExternalOutput: DC 24 V Power Device Installed Quantity 1 Power Device Maximum Quantity Supports 1 External Colour Gray Included Accessories Power Adapter PoE Injector Package Type Retail Depth (mm) 177 mm Height (mm) 44 mm Width (mm) 44 mm Nominal Weight 0.193 kg Maximum Operating Ambient Temperature 70 °C Minimum Operating Ambient Temperature -30 °C Warranty Products Returnable Yes Warranty Term (month) 23 month(s) Warranty Validation Criteria Serial Number Pack Weight Brutto (kg) 0.19 kg Pack Weight Netto (kg) 0.01 kg Pieces in pack 1 Box Weight Brutto (kg) 0.19 kg Retail Packaging Net Weight Carton 0.01 kg Retail Packaging Net Weight Plastic 0.01 kg Packs in Box 1
Original part number DN-93904 Product name DIGITUS CAT 5e, Class D, RJ45 Patch Cable Adapter, shielded Producer DIGITUS Class of product Complete outlet Type of connector 2 x RJ-45 1 x RJ45 Number of ports 3 Wiring type SSTP - Screened Shielded Twisted Pair Usage indoor Colour Silver-grey
Original part number PP6U-3M/R Product name Gembird UTP Cat6 Patch cord, 3 m, red Producer Gembird Class of product Patchcord network cable Wiring type CAT6 Length 3 m Category 6 Coating type PVC - polyvinyl chloride Plug 1 type 1 x RJ45 Plug 2 type 1 x RJ45 Cross-Over No Colour Red
The UFiber splitter carries data from a UFiber OLT’s long-haul cable and shares it with multiple UFiber ONUs. Available with 4, 8, 16, or 32 outputs. PLC Splitters UF-SPLITTER-4 UF-SPLITTER-8 UF-SPLITTER-16 UF-SPLITTER-32 Input (1) SC/APC (1) SC/APC (1) SC/APC (1) SC/APC Outputs (4) SC/APC (8) SC/APC (16) SC/APC (32) SC/APC Insertion Loss with Connectors 7.4 dB 10.5 dB 13.7 dB 17.0 dB Uniformity Loss 0.6 dB 0.8 dB 1.2 dB 1.5 dB Polarization Dependent Loss 0.3 dB 0.3 dB 0.3 dB 0.3 dB Wavelength Bandwidth 1260-1650 nm 1260-1650 nm 1260-1650 nm 1260-1650 nm Return Loss (All Ports) 50 dB 50 dB 50 dB 50 dB Directivity 55 dB 55 dB 55 dB 55 dB Fiber Type G657A1 G657A1 G657A1 G657A1 Operating Temperature -40 to 85° C (-40 to 185° F) -40 to 85° C (-40 to 185° F) -40 to 85° C (-40 to 185° F) -40 to 85° C (-40 to 185° F) Total Length 4.06m (13.32') 4.06 m (13.32') 4.06 m (13.32') 4.08 m (13.39') Weight 58 g (2.0 oz) 62 g (2.2 oz) 110 g (3.9 oz) 160 g (5.6 oz)
• Allows adjustment both vertically and horizontally • Supports all LHG series, products, including LHG XL. • Made from metal. • Package also includes a U-bolt and a mounting kit.
Features: Extends IR Range Up to 25 m (82 ft) Weather Resistent for Outdoor Use Powered and Controlled by the UniFi Video Camera Compatible with UniFi Video Camera G3 model UVC-G3
Naudi sujuvat 4K voogedastust ja allalaadimist superkiire 1,8 Gbps Wi-Fi kiirusega. Täiustatud algoritmid, kiirendustehnoloogia ja kõrgjõudlusega antennid parandavad Wi-Fi katvust. Järgmise põlvkonna platvorm tagab kiire ja stabiilse Wi-Fi, samal ajal vähendades energiatarvet. Lapsevanemate kontrollimise funktsioonid pakuvad mitmekülgseid võimalusi, sh URLi blokeerimine ja profiili haldamine. • Superkiire 1,8 Gbps Wi-Fi • Järgmise põlvkonna platvorm • Lapsevanemate kontroll • Ühildub enamiku ISP-dega • OneMesh tugi • Lihtne seadistamine
Bluetooth 5.0 Nano USB Adapter - Bluetooth 5.0 – Applies the latest Bluetooth 5.0 technology, backward compatible with Bluetooth V4.0/3.0/2.1/2.0/1.1 - Wireless Connectivity – Provides stable and convenient communication between Bluetooth devices and your PC or laptop - Nano-Sized – Ultra-small for convenient portability with reliable high performance - Supported Operating Systems – Windows 11/10/8.1/7 Type Adapter Bluetooth 5.0
Tooteandmed on täiendamisel ja tõlkimisel. Kui vajate toote osas täiendavat infot või võõrkeelse teksti mõistmisel abi, andke sellest palun teada e-posti teel abi@onoff.ee. Saadame teile vastuse esimesel võimalusel. Vabandame võimalike ebamugavuste pärast!
Dual-Radio Performance Gigabit Speeds The UniFi AC Pro AP delivers 5x the performance of the first-generation UniFi AP while still maintaining Ubiquiti’s disruptive pricing strategy. Sleek Ultra-Compact Design The UniFi AC Pro AP features a cleaner design in a reduced footprint – half the size compared to the standard UniFi AP. Scalable Enterprise Wi-Fi Management The UniFi Controller v4 software is a powerful enterprise wireless software engine ideal for high-density client deployments requiring low latency and high uptime performance. With its software-based capabilities the UniFi virtual control plane allows for unlimited scalability under one centralized controller. Remotely access the UniFi Controller to upgrade deployed UniFi APs while in the field.
