5m SFP+ 10Gbps Active Optics direct attach cable. This is highly cost-effective way to connect two SFP/SFP+ devices for very short distances, within racks and across adjacent racks. It works with all our products with SFP/SFP+ ports, including new RB4011 series (RB4011 series are not compatible with our passive direct attach cables S+DA0001 and S+DA0003)
The GPEN11 is a power injector that can be mounted on a wall, and will power your uplink devices with PoE power. The GPEN11 is part of the GPEN (Gigabit Passive Ethernet Network) concept, which aims to replace GPON installations with lower cost and more easy to deploy ethernet alternative.It also has a designated space for an ISP sticker on the front. Sticker size: 6,6 x 2,54 cm.GPEN11 can be mounted inside customer premises, next to the WiFi router which provides the connectivity to the users. The GPEN11 itself will then power the ISP router, whether a outdoor wireless unit mounted on a roof, or the network switch. The GPEN unit can be securely attached to a wall, or communications cabinet. The ethernet cable can be routed either directly through it’s bottom cable opening, or into the wall, as preferred. The GPEN family of products includes switches with outdoor enclosures, which support powering from PoE sources, such as the GPEN11 injector. A basic setup inside customer premisis to provide the Internet connection. Power adapter is not included in the package.
Tootja: Lanberg Tootegrupp: Socket component Type of plug's component: moodul adapter Type of ühenduspesa: 1 x RJ45 Lisaandmed: ühenduspesa:, external värv: valge
Tootja: Intellinet võrguseade Solutions Tootegrupp: PoE toiteplokk pakkuja tüüp: Power over Ethernet Injector sisendpinge: 230 V AC väljundpinge: 44 V DC, 57 V DC Real power: 30 vatti Toetatud protokollid ja standardid: IEEE 802.3af - Power over Ethernet, IEEE 802.3at - Power over Ethernet+, IEEE 802.3 - 10BaseT, IEEE 802.3ab - 1000BaseT, IEEE 802.3u - 100BaseTX Lisaandmed: 1 RJ-45 1000 Mbps input port, 1 RJ-45 1000 Mbps data ja power väljund ports, 1 toide ühenduspesa (3 pin) kõrgus: 35 mm laius: 172 mm sügavus: 154 mm
The LevelOne WAB-6010 is a managed, outdoor single-band 802.11n wireless access point, capable of 300 Mbps wireless internet speeds. The device runs on 2.4 GHz frequency, and can be used as part of a managed network when controlled by the LevelOne WAC-2000/WAC-2003 Wireless LAN Controller. LevelOne WAB-6010 also offers PoE, removing the need for an external power supply, which makes it easy to install. Advanced weatherproof design, rated to IP65 means the WAP is designed for outdoor deployments, and can withstand rain, humidity, dust, snow and extremely hot conditions. A fast, versatile and secure access point for a wide variety of outdoor network requirements.Share your wireless network up to 300MbpsCompatible with IEEE 802.11b/g/n wireless standardsMulti-operation modes to suit different wireless applicationsDual power support: 12V DC/PoE (IEEE 802.3at)Weatherproof IP65-rated housingProvides up to 4 SSIDs to separate network traffic and enhance security
Streaming, gaming, or working from home – whatever you want to do now or in the future, with devolo Magic 1 LAN you are already prepared today for the day after tomorrow. The innovative Powerline technology gets every device in every room online quickly and reliably. With top speeds of up to 1200 Mbit/s, even over distances of up to 400 meters. Stationary devices such as a smart TV or console can be connected via the Gigabit LAN port. devolo Magic 1 LAN features smart Plug & Play. Simply unpack, plug in, and get fast connections up and running. All devolo Magic adapters can also be conveniently managed via the new, innovative devolo app.
UVC-G3-F-C Ubiquiti Recessed ceiling mount accessory for the UVC-G3-FLEX camera. Mount your camera inside the ceiling or a ceiling tile for a clean, low-profile installation. Includes mounting hardware for drywall, solid surface, or ceiling tile installation. Optional security screw locks the camera to the mount from above for added security. Features: Low-profile installationRequires 2 1/8" inch cutoutIncludes drywall mounting anchorsIncludes retainer for ceiling tile mountOptional security screw locks camera to mount* - UVC-G3-Flex camera is shown for demonstration purposes only and sold separately!
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: Cat6 pikkus: 0.25 m Category: 6 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 0.5 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: must
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 0.5 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
4 x Gigabit PoE+ ports 1 x Gigabit port 120W PoE power budget 10Gbps switching capacity Supports jumbo frames up to 9KB Hardened IP30 rated metal housing Includes DIN-Rail bracket and magnetic wall mount kit Operating temperature range of -40° – 75° C (-40° – 167° F) Redundant power inputs with overload current protection Alarm relay triggered by power failure Power supply sold separately (models: TI-S12048, TI-S24048, and 48VDC3000)
Integrated multi-band LTE omni antenna + WiFi omni antenna + place to install Teltonika RUT240 or 230 (All-in-one) QuSpot omni LTE antenna for Teltonika RUT240 or 230 router is a perfect outdoor device for mobile and fixed installations like industrial, CCTV, hotspots, yachts, boats, campers, RV etc. It has embedded also omni Wi-Fi antenna. If you use RUT240 or 230 with QuSpot antenna, you get an integrated complete solution with embedded router and multi band antennas in one enclosure. NOTE: For RUT230 one LTE antenna is unplugged. All antennas and Teltonika router integrated in one enclosure Outdoor antenna works in any weather conditions, IP67 Antenna perfectly matched with the router Passive PoE support
4 x Gigabit PoE+ porti 1 x Gigabit-port 1 x SFP-pesa 12 Gbps kommutatsioonivõimsus 65W PoE võimsuse eelarve Toetab 100/1000Base-FX kiudoptilisi SFP-mooduleid Vähendab seadmekulusid, edastades andmeid ja toite üle olemasolevate võrgukaablite IEEE 802.1p QoS ja DSCP läbipääsu tugi Kompaktne seinale paigaldatav metallist korpus Ventilaatorita disain TRENDneti 6-portiline Gigabit PoE+ Switch, mudel TPE-TG611, vähendab seadmete ja paigalduskulusid, edastades andmeid ja toite olemasolevatele Ethernet-kaablitele. See väike SFP-toega võrgukommutaator pakub nelja Gigabit PoE+ porti, mille PoE-võimsuse kogueelarve on 65 W, ühte gigabit-porti ja ühte SFP-pesa kiudoptiliste rakenduste jaoks. Tänu PoE-tehnoloogiale vajavad kasutajad ainult ühte kaablikomplekti nii andmete kui ka toite edastamiseks. SFP-toega väike võrgukommutaator võimaldab teil ühendada PoE-seadmeid, näiteks traadita pääsupunkte, IP-kaameraid, VoIP-telefone, IP-videokoodereid, juurdepääsukontrolli ja muud. Lisatud SFP-pesa toetab nii ühemoodilisi kui ka mitmemoodilisi kiudoptilisi SFP-mooduleid pikamaa kiudoptiliste võrgurakenduste jaoks. PoE+ toide SFP-toega väikesel võrgukommutaatoril on 65 W koguvõimsuse PoE-eelarve, mis varustab kuni nelja Power over Ethernet seadet. Gigabit Kuus gigabiti porti pakuvad sellele SFP-toega väikesele võrgukommutaatorile täielikku 12 Gbps lülitusvõimsust servavõrkude paigaldamiseks. Kompaktne disain Kompaktse ja kerge korpuse disainiga kompaktne kommutaator sobib hästi lauaarvutite paigaldamiseks. Selle ventilaatorita disain sobib ideaalselt vaiksesse keskkonda, mis nõuab vaikset tööd. Võrgupordid Neli gigabitilist PoE+ porti, üks gigabitiline port ja üks SFP-pesa. PoE+ Annab kuni 30 W PoE+ võimsust ühe PoE-pordi kohta, kusjuures selle väikese SFP-toega võrgukommutaatori võimsuse eelarve on 65 W. Lülitusvõimsus Selle SFP-toega väikese võrgukommutaatori lülitusvõimsus 12 Gbps Jumbo Frame Saadab suuremaid pakette ehk Jumbo raame (kuni 9KB), et suurendada jõudlust. LED-indikaatorid LED-indikaatorid edastavad pordi olekut Korpus Kompaktne ja väike võrgukommutaator seinale paigaldatava metallkorpusega
LTU-ROCKET Ubiquiti introduces the LTU Rocket®, the first Point-to-Multi-Point (PtMP) BaseStation radio in LTU™ product family. Operating in the 5 GHz frequency band, the LTU Rocket is a spectrally efficient, noise-resilient PtMP AP specifically designed for wireless ISPs (WISPs).Incorporating Ubiquiti’s proprietary LTU technology, the LTU-Rocket is a Point-to-MultiPoint (PtMP) 5 GHz Access Point featuring 2+ Mpps processing, proprietary RF filtering, and flexible GPS sync for superior performance. Channel width flexibility (10/20/30/40/50 MHz) allows independent TX and RX channel frequency configurations anywhere within the radio band to avoid local interference. A custom co-processor is included for future performance and feature upgrades. Functions in a PtMP environment using the LTU-Pro, LTU-Lite for subscriber stations.Primary features of the LTU Rocket include:• 600+ Mbps PtMP performance(1)• Up to 64 client connections per AP(2)• 2+ Million pps• Proprietary RF filtering (1) 1+ Gbps with future firmware upgrade. (2) 255 client connections with future firmware upgrade. Superior PerformanceLTU is a new, proprietary technology with custom silicon and radio design that break through the limitations of 802.11 Wi-Fi technology. This enables LTU to deliver far superior performance over previous airMAX products that are based on 802.11 Wi-Fi.The LTU Rocket is designed for WISPs from the ground floor up. Its core communications processing engine enables low latency, long-range capability, DFS flexibility, higher constellations, better power output, and improved receive sensitivity.Seamless CompatibilityThe LTU Rocket is designed to be paired with a variety of Ubiquiti antennas to suit the needs of each installation. The radio includes a mounting bracket that allows it to be used with a 5 GHz airMAX® Sector antenna or airMAX Omni antenna for a complete 5 GHz PtMP BaseStation. You can even pair three LTU Rocket radios with the airPrism® 5 GHz 3x30° HD Sector Antenna for co-location deployments.The LTU Rocket also works with any CPE device in the LTU family, such as the LTU-Pro.
The DIGITUS Industrial Gigabit switch is designed for harsh environments where it is exposed to moisture, temperature fluctuations and vibration. With a temperature range of -40°C to 85°C, the Industrial Gigabit switch can be used under the most adverse conditions. The PoE ports with IEEE802.3af/at support can supply PoE capable devices with up to 30 W per port. It ensures a constant availability in highly sensitive areas such as transport, production, traffic and safety monitoring. The simple Plug-and-Play system allows the Industrial Gigabit switch to be quickly integrated into the respective environment. With its Gigabit connectivity, the Industrial Gigabit switch is a flexible, cost-effective solution for the industrial environment.
This outdoor wireless system with a built-in antenna can provide a connection even in the most remote locations. Tiny powerful can be used with any satellite TV dish with an offset mount.LDF LTE6 kit is a device for extremely remote locations that are within cellular network coverage. Attach it to any satellite TV dish (NOT included) and the dish will act as a reflector greatly amplifying the signal.Using large enough dishes it is possible to obtain antenna amplification of 30 dBi or more. That means – Internet connectivity is possible even in areas where you would usually have no mobile connectivity at all. Stormy weather is not a problem either – with a solid IP68 rating LDF LTE6 kit can withstand dust dirt and sand as well as temporary immersion in water.LDF LTE6 kit features a CAT6 LTE modem which enables carrier aggregation and allows the device to use multiple bands at the same time. A huge advantage when there are a lot of LTE users in the area. It provides better responsiveness and higher efficiency for weaker signal situations in the countryside.Dish is shown for demonstration only and NOT included!
Der Cisco Compatible SFP-10G-LR SFP+/LR SFP-Transceiver ist ein Erweiterungsmodul für Cisco Switches. Der Cisco Compatible SFP-10G-LR SFP+/LR unterstützt den 10 Gigabit-Standard auf einer Reichweite von bis zu 10 Kilometer und kann dank Hot-Swap-Fähigkeit während des Betriebes ein- und ausgebaut werden.
