Võrguseadmed

Frequency ranges:LTE 700 & 800: 698-862MHz / 9.5 dBiLTE 1800: 1710-1880MHz / 11 dBiLTE 2600: 2500-2700MHz / 11 dBi3G 900: 880-960MHz / 10 dBi3G 2100: 1920-2170MHz / 11 dBiWi-Fi (WLAN): 2401-2495MHz / 11 dBiFeatures:Antenna Gain: 9–11 dBiCable length: 5 mConnector: SMA maleImpedance: 50 oHmMax. power connection: 50 WAntenna length: 1070 mmNumber of elements: 58Polarization: 2 × 45 degreesFront-back ratio: 23 dBBeam width H/V: 54/46°VSWR:

CAT 6 võrgukaabel S/FTP (PiMF), roheline vaskjuht (CU), halogeenivaba kaablikest (LSZH) Eeljuhtmega topeltvarjestatud LAN-kaabel RJ45 pistikutega võrgukomponentide ühendamiseks CAT 6 internetikaabel, mis sobib 10 Gigabit Etherneti 10BASE-T, 100BASE-TX, 1000BASE-T, 10/100/1000/10000 Mbit/s jaoks S/FTP üldine varjestus: alumiiniumfooliumist varjestus üksikute juhtmepaaride jaoks (PiMF) ja alumiiniumist punutud varjestus kaabli mantli jaoks Kvaliteetne vaskjuht (CU) ja kullatud kontaktid tagavad suurepärase ja võimsa võrguühenduse Paindekaitse ja vastupidav PVC-kate kaitsevad võrgukaablit tõhusalt purunemise eest RJ45 pistiku riivikaitse takistab riivi kinnijäämist või lahtimurdmist, aidates tagada usaldusväärse Interneti-ühenduse Etherneti kaabel on CAT 6 testitud ja sobib Power over Etherneti (PoE, PoE+) jaoks.

CAT 6A ühenduskaabel, S/FTP (PiMF), hall vaskjuht (CU), halogeenivaba kaabli ümbris (LSZH) CAT-kaablid edastavad signaale tippkvaliteediga ja suure kiirusega, tagades alati stabiilse ühenduse. Kvaliteetsed sisejuhid, tugev kaablikest ja täpselt sobivad pistikud iseloomustavad meie ühenduskaablite ja pistikutega portfelli. Goobay pakub alati täiuslikke tooteid teie võrguvajaduste rahuldamiseks - olenemata sellest, kas teie eesmärk on luua kodu- või ettevõtte võrk. Topeltvarjestatud LAN-kaabel 2x RJ45 pistikutega võrgukomponentide ühendamiseks CAT 6A internetikaabel, mis sobib 10 Gigabit Ethernet 10BASE-T, 100BASE-TX, 1000BASE-T, 10/100/1000/10000 Mbit/s jaoks. S/FTP üldvarjestus: üksikute juhtmepaaride (PiMF) alumiiniumfooliumiga varjestus ja kaabli mantli alumiiniumpunutisega varjestus. Kvaliteetne vaskjuht (CU) ja 3µ kullatud kontaktid tagavad suurepärase ja võimsa võrguühenduse. Painutuskaitse ja tugev PVC-mantel kaitsevad Ethernet-kaablit tõhusalt purunemise eest RJ45-pistikute lukustuskaitse takistab lukustuse kinnijäämist või katkemist, aidates tagada usaldusväärset internetiühendust Võrgukaabel on CAT 6A testitud (koos katseprotokolliga) ja sobib Power over Ethernet (PoE,PoE+) jaoks.

CAT 6A ühenduskaabel, S/FTP (PiMF), hall vaskjuht (CU), halogeenivaba kaabli ümbris (LSZH) CAT-kaablid edastavad signaale tippkvaliteediga ja suure kiirusega, tagades alati stabiilse ühenduse. Kvaliteetsed sisejuhid, tugev kaablikest ja täpselt sobivad pistikud iseloomustavad meie ühenduskaablite ja pistikutega portfelli. Goobay pakub alati täiuslikke tooteid teie võrguvajaduste rahuldamiseks - olenemata sellest, kas teie eesmärk on luua kodu- või ettevõtte võrk. Topeltvarjestatud LAN-kaabel 2x RJ45 pistikutega võrgukomponentide ühendamiseks CAT 6A internetikaabel, mis sobib 10 Gigabit Ethernet 10BASE-T, 100BASE-TX, 1000BASE-T, 10/100/1000/10000 Mbit/s jaoks. S/FTP üldvarjestus: üksikute juhtmepaaride (PiMF) alumiiniumfooliumiga varjestus ja kaabli mantli alumiiniumpunutisega varjestus. Kvaliteetne vaskjuht (CU) ja 3µ kullatud kontaktid tagavad suurepärase ja võimsa võrguühenduse. Painutuskaitse ja tugev PVC-mantel kaitsevad Ethernet-kaablit tõhusalt purunemise eest RJ45-pistikute lukustuskaitse takistab lukustuse kinnijäämist või katkemist, aidates tagada usaldusväärset internetiühendust Võrgukaabel on CAT 6A testitud (koos katseprotokolliga) ja sobib Power over Ethernet (PoE,PoE+) jaoks.

Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: UTP - unschielded twisted pair kaabel, 4 pairs pikkus: 3 m Category: 6 Coating type: PVC - polyvinyl chloride 1-ühenduse tüüp: RJ45 2-ühenduse tüüp: RJ45 Cross-Over: Ei Boot: non-snag-proof värv: kollane Lisaandmed: AWG 24 (8*7*0.2mm), Conductor stranding

Color: Black Cable length: 5m RPSMA Male to N Male plug cable

Color: Black Cable length: 9m RPSMA Male to N Male plug cable

4 X 10G NETWORK ADVANTAGE

10G-Ready 12-port patch panel Cat6A patch panels deliver a steady connection to copper gigabit & 10G switches Shielded design to eliminate EMI and crosstalk Compatible with Cat5e, Cat6 and Cat6A cabling Wall mountable metal housing Color-coded labeling for T568A and T568B wiring schemes 110 IDC type terminal blocks (use 110 or Krone type tool) Use with TRENDnet TC-PDT Punch Down Tool (sold separately) Supports ANSI/EIA/TIA 568-B.2-1, ISO/IEC 11801, and EN50173-1 90° angle type Operating temperature: -25° – 50° C (-13° – 122° F) 2 year warranty TRENDnet’s 12-Port Cat6A Shielded Wall Mount Patch Panel, model TC-P12C6AS, is ideal for gigabit and 10G Copper Ethernet network applications. This patch panel is ideal for use with Cat6A shielded cabling, which is specifically designed to eliminate EMI and crosstalk, ensuring peak performance and data integrity. Cat6A Performance Cat6A cabling allows performance of up to 10Gbps speeds over Cat6A Ethernet cables. Shielded Housing Design Sturdy metal housing design protects against EMI/RFI noise for a more stable connection. Cable Management Integrated cable management cover plate with convenient cable separation for better organization and reduced cable clutter.  

CAT6 SSTP Patch CableVention CAT6 SSTP Patch Cord is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates. These cables deliver improved performance over standard CAT5E cables.The superior Shielded design of this Cat6 cable includes individually foil-shielded bare copper connectors encased in a overall steel braid; fully shielded metal connectors have gold-plated RJ45 contacts and a snag-less boot with molded strain relief.CAT6 is completely backward-compatible with current CAT5 CAT5E equipment. Vention CAT6 SSTP Patch Cords are composed of 4 pairs 27AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard.Used to connect your network card to any of the following: 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Virtually eliminates alien crosstalk and interference.Performance rated beyond 250 MHz.

JE-250 S2T - lock by non-lose screws two cable glands instalation by bracketTechnical parametersInner size 246 x 185 x 61/50 mmMaterial Aluminum alloy with high corrosion protectionWeight 1.5 kg Specification:GentleBOX JE-250 Alu is an ideal metal outdoor box for installation of electronicsMetal body assures rezistance against interferences hight rezistance against lightning and waterBox included ventilation plug for the best water protectionssembling screws and plastic self-hold distance tubes (8/8 pcs)Easy to instal on mast or wall - variableThe package includes cable gland which is secured against spinning by specially molded retaining linesHinge with end stop for cable glands protectionUBNT Rocket instalation by GentleCLIPReady for easy instalation Mikrotik RouterBoards RB 411 RB911 RB912 RB433 RB493 others by sheet (not including the package)

Frequency: 690-2690Mhz Gain: 5dBi Maximum input power: 50W Dimension: length:190mm width:17mm Radiation: Omni-directional

Tüüp: Kommutaator (Switch); Side tüüp: 10 / 100 / 1000 BaseT; Printserver: Ei; Juhtmevaba side standardid: Ei; SIM-kaardi pesa olemasolu: Ei; Liides LAN (RJ-45): On; USB 2.0 liides: Ei; WAN-port liides: Ei; Portide arv: LAN x 8; Värv: Must; Mõõtmed...

Ruijie RG-RAP2200(E)

This USB pin header cable by Delock enables the connection of different USB 2.0 devices through the USB 3.0 pin header of your mainboard. The connected USB 2.0 devices will be supplied with sufficient power due to the connection to USB 3.0. Furthermore Delock offers optional pin header adapter which are suitable for the connection of standard USB devices.   Specification • Suitable adapter by Delock: item 41761, 41762, 41764 • Connector: USB 3.0 pin header 19 pin female > USB 2.0 pin header 8 pin male • Data transfer rate up to 480 Mb/s • Power supply up to 900 mA • Cable length ca. 30 cm • Colour: black   System requirements • Mainboard with a free USB 3.0 pin header 19 pin male   Package content • USB pin header cable

RJ45 võrgukaabel CAT 6A S/FTP (PiMF), 500 MHz, CAT 7 töötlemata kaabliga, magenta vaskjuht (CU), halogeenivaba kaablikest (LSZH) CAT-kaablid edastavad signaale tippkvaliteediga suurel kiirusel, tagades alati stabiilse ühenduse. Kvaliteetsed sisejuhid, vastupidav kaablikate ja täpselt sobivad pistikud eristavad meie ühenduskaablite ja pistikute portfelli. Meie lahendused sobivad eriti hästi kõrge eraldusvõimega pildiedastuseks sagedustel 8K @ 60 Hz ja 4K @ 120 Hz. Goobay pakub alati teie võrguvajaduste jaoks täiuslikke tooteid – olenemata sellest, kas soovite luua kodu- või ettevõttevõrku. Eeljuhtmega topeltvarjestatud LAN-kaabel (CAT 7 600 MHz) RJ45 pistikutega (CAT 6A 500 MHz) võrgukomponentide ühendamiseks Kiire võrgukaabel spetsiaalselt kõrge eraldusvõimega pildiga (8K @ 60 Hz ja 4K @ 120 Hz) mängukonsoolidele, nagu Sony PlayStation 5 või Microsoft Xbox X S/FTP üldine varjestus: alumiiniumfooliumist varjestus üksikute juhtmepaaride jaoks (PiMF) ja alumiiniumist punutud varjestus kaabli mantli jaoks Kvaliteetne vaskjuhe (CU) ja 50µ kullatud kontaktid tagavad suurepärase ja võimsa võrguühenduse RJ45 pistiku riivikaitse takistab riivi kinnijäämist või lahtimurdmist, aidates tagada usaldusväärse Interneti-ühenduse Paindekaitse ja vastupidav PVC-kate kaitsevad Etherneti kaablit tõhusalt purunemise eest CAT 7 kaabel sobib Power over Ethernet (PoE, PoE+) ja 10 Gigabit Etherneti jaoks kiirusega kuni 10/100/1000/10000 Mbit/s

RJ45 võrgukaabel CAT 6A S/FTP (PiMF), 500 MHz, CAT 7 töötlemata kaabliga, hall vaskjuht (CU), halogeenivaba kaablikest (LSZH) CAT-kaablid edastavad signaale tippkvaliteediga suurel kiirusel, tagades alati stabiilse ühenduse. Kvaliteetsed sisejuhid, vastupidav kaablikate ja täpselt sobivad pistikud eristavad meie ühenduskaablite ja pistikute portfelli. Meie lahendused sobivad eriti hästi kõrge eraldusvõimega pildiedastuseks sagedustel 8K @ 60 Hz ja 4K @ 120 Hz. Goobay pakub alati teie võrguvajaduste jaoks täiuslikke tooteid – olenemata sellest, kas soovite luua kodu- või ettevõttevõrku. Eeljuhtmega topeltvarjestatud LAN-kaabel (CAT 7 600 MHz) RJ45 pistikutega (CAT 6A 500 MHz) võrgukomponentide ühendamiseks Kiire võrgukaabel spetsiaalselt kõrge eraldusvõimega pildiga (8K @ 60 Hz ja 4K @ 120 Hz) mängukonsoolidele, nagu Sony PlayStation 5 või Microsoft Xbox X S/FTP üldine varjestus: alumiiniumfooliumist varjestus üksikute juhtmepaaride jaoks (PiMF) ja alumiiniumist punutud varjestus kaabli mantli jaoks Kvaliteetne vaskjuhe (CU) ja 50µ kullatud kontaktid tagavad suurepärase ja võimsa võrguühenduse RJ45 pistiku riivikaitse takistab riivi kinnijäämist või lahtimurdmist, aidates tagada usaldusväärse Interneti-ühenduse Paindekaitse ja vastupidav PVC-kate kaitsevad Etherneti kaablit tõhusalt purunemise eest CAT 7 kaabel sobib Power over Ethernet (PoE, PoE+) ja 10 Gigabit Etherneti jaoks kiirusega kuni 10/100/1000/10000 Mbit/s

Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca

Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca

Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca

Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca

Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca

Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca

Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca

Double Shielded Flexible HF400UF Coaxial Cable (LMR400UF UltraFlex equivalent) MADE IN ITALY HF400UF Coaxial cable is one of the most popular products within the coaxial cable range. The LMR400 / HF400 is recognized globally as the industry standard ultra low loss flexible low cost lightweight DC – 6GHz coaxial cable solution for many RF applications. Why choose HF400UF? HF400UF is very well know for it’s Extreme flexibility Excellent Reliability and Low attenuation. The HF400UF cable has much lower attenuation than RG 8 RG 213 RG 214 and 9913 Air-Dielectric type Cables. The HF400UF cable was created to achieve much better flexing abilities than the HF400/LMR400. This has been achieved through the use of a stranded center conductor and PVC outer jacket. This is an excellent product where extra flexure is required for installations. How is the HF400UF low loss figures achieved? This is achieved due to the cable construction specifications. The center conductor uses a high conductivity Stranded Bare copper conductor material. The dielectric is gas injected foamed Polyethylene which helps achieve 84% Velocity of Propagation. The Dielectric has a Aluminium foil outer conductor which is chemically bonded on to it. Due to the cable construction the attenuation is significantly lower as compared to single shielded coaxial cables: RF shielding of HF400UF is > 90 dB as compared to 40 dB for RG8. Outer Sheath HF400UF coaxial cable comes with a UV resistant flexible PVC Jacket. This helps allow the cable to bend with much less force than that of standard HF400 with PE or LSZH Jacket. Frequency Operating Band HF400UF is designed to operate excellent from DC up to 6GHz. For any frequency band at VHF and above HF400 series is the obvious choice. Features: Indoor/Outdoor. Flexible UV-protected black PVC jacket Stranded Pure Copper Conductor and Tinned Copper Braided Shield for best-in-class data transmission with minimal attenuation Certified for EU and UK. Full compliance with European standards CE RoHS UKCA Class CPR Eca

RJ45 patch cord CAT 6A S/FTP (PiMF), 500 MHz, with CAT 7 raw cable, blackcopper conductor (CU), halogen-free cable sheath (LSZH)Our CAT cables transmit signals in top quality at high speed, always guaranteeing a stable connection. High-quality inner conductors, robust cable sheathing and precisely fitting plugs distinguish our portfolio of connection cables and plugs. Our solutions are especially suitable for high-resolution image transmission in 8K @ 60 Hz and 4K @ 120 Hz. Goobay always provides the perfect products for your network needs - whether you aim to set up a home or company network. Simply. All. You need!Prewired, double-shielded LAN cable (CAT 7 with 600 MHz) with RJ45 connectors (CAT 6A with 500 MHz) for connecting network componentsHigh-speed network cable especially for game consoles with high-resolution picture (8K @ 60 Hz and 4K @ 120 Hz) such as Sony PlayStation 5 or Microsoft Xbox XS/FTP overall shield: aluminium foil shield for individual wire pairs (PiMF) and aluminium braid shield for the cable sheathHigh-quality copper conductor (CU) and 50µ gold-plated contacts guarantee an excellent, powerful network connectionLatch protection on the RJ45 connector prevents the latch from snagging or breaking off, helping to provide a reliable internet connectionBend protection and a sturdy PVC jacket effectively protect the Ethernet cable from breakageCAT 7 cable is suitable for Power over Ethernet (PoE, PoE+) and 10 Gigabit Ethernet with speeds of up to 10/100/1000/10000 Mbit/s

RJ45 võrgukaabel CAT 6A S/FTP (PiMF), 500 MHz, CAT 7 töötlemata kaabliga, kollane vaskjuht (CU), halogeenivaba kaablikest (LSZH) CAT-kaablid edastavad signaale tippkvaliteediga suurel kiirusel, tagades alati stabiilse ühenduse. Kvaliteetsed sisejuhid, vastupidav kaablikate ja täpselt sobivad pistikud eristavad meie ühenduskaablite ja pistikute portfelli. Meie lahendused sobivad eriti hästi kõrge eraldusvõimega pildiedastuseks sagedustel 8K @ 60 Hz ja 4K @ 120 Hz. Goobay pakub alati teie võrguvajaduste jaoks täiuslikke tooteid – olenemata sellest, kas soovite luua kodu- või ettevõttevõrku. Eeljuhtmega topeltvarjestatud LAN-kaabel (CAT 7 600 MHz) RJ45 pistikutega (CAT 6A 500 MHz) võrgukomponentide ühendamiseks Kiire võrgukaabel spetsiaalselt kõrge eraldusvõimega pildiga (8K @ 60 Hz ja 4K @ 120 Hz) mängukonsoolidele, nagu Sony PlayStation 5 või Microsoft Xbox X S/FTP üldine varjestus: alumiiniumfooliumist varjestus üksikute juhtmepaaride jaoks (PiMF) ja alumiiniumist punutud varjestus kaabli mantli jaoks Kvaliteetne vaskjuhe (CU) ja 50µ kullatud kontaktid tagavad suurepärase ja võimsa võrguühenduse RJ45 pistiku riivikaitse takistab riivi kinnijäämist või lahtimurdmist, aidates tagada usaldusväärse Interneti-ühenduse Paindekaitse ja vastupidav PVC-kate kaitsevad Etherneti kaablit tõhusalt purunemise eest CAT 7 kaabel sobib Power over Ethernet (PoE, PoE+) ja 10 Gigabit Etherneti jaoks kiirusega kuni 10/100/1000/10000 Mbit/s

RJ45 võrgukaabel CAT 6A S/FTP (PiMF), 500 MHz, CAT 7 töötlemata kaabliga, punane vaskjuht (CU), halogeenivaba kaablikest (LSZH) CAT-kaablid edastavad signaale tippkvaliteediga suurel kiirusel, tagades alati stabiilse ühenduse. Kvaliteetsed sisejuhid, vastupidav kaablikate ja täpselt sobivad pistikud eristavad meie ühenduskaablite ja pistikute portfelli. Meie lahendused sobivad eriti hästi kõrge eraldusvõimega pildiedastuseks sagedustel 8K @ 60 Hz ja 4K @ 120 Hz. Goobay pakub alati teie võrguvajaduste jaoks täiuslikke tooteid – olenemata sellest, kas soovite luua kodu- või ettevõttevõrku. Eeljuhtmega topeltvarjestatud LAN-kaabel (CAT 7 600 MHz) RJ45 pistikutega (CAT 6A 500 MHz) võrgukomponentide ühendamiseks Kiire võrgukaabel spetsiaalselt kõrge eraldusvõimega pildiga (8K @ 60 Hz ja 4K @ 120 Hz) mängukonsoolidele, nagu Sony PlayStation 5 või Microsoft Xbox X S/FTP üldine varjestus: alumiiniumfooliumist varjestus üksikute juhtmepaaride jaoks (PiMF) ja alumiiniumist punutud varjestus kaabli mantli jaoks Kvaliteetne vaskjuhe (CU) ja 50µ kullatud kontaktid tagavad suurepärase ja võimsa võrguühenduse RJ45 pistiku riivikaitse takistab riivi kinnijäämist või lahtimurdmist, aidates tagada usaldusväärse Interneti-ühenduse Paindekaitse ja vastupidav PVC-kate kaitsevad Etherneti kaablit tõhusalt purunemise eest CAT 7 kaabel sobib Power over Ethernet (PoE, PoE+) ja 10 Gigabit Etherneti jaoks kiirusega kuni 10/100/1000/10000 Mbit/s