The TFC-110MST Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Multi Mode ST-Type fiber converter spanning distances up to 2km (1.2 miles). Ports include 1 x 10/100Base-TX (RJ-45) port and 1 x 100Base-FX fiber port (ST-Type).ST-type multi-mode fiber port connects over distances of up to 2km (1.2 miles)10/100Base-TX port supports Auto-Negotiation, Auto-MDIX and Full-Duplex modeFunctions as a stand alone converter or with the TFC-1600 fiber chassis
1000Base-T 1 1000Base-LX 1 SC 1 RJ45 1 Cable distance 10km Power supply requirements 7.5V DC, 1A external power adapter Shipping box quantity 1 Unit Brutto Volume 0,001752 cubm Unit Net Weight 0,354 kg Unit Gross Weight 0,526 kg
1000Base-T 1 1000Base-LX 1 SC 1 RJ45 1 Cable distance 10km Power supply requirements 7.5V DC, 1A external power adapter Shipping box quantity 1 Unit Brutto Volume 0,001752 cubm Unit Net Weight 0,354 kg Unit Gross Weight 0,523 kg
Protect your network from catastrophic lightning strikes and electrical surgeUse with TRENDnets High Power Wireless Outdoor Access Point (TEW-455APBO)Multiple lightning strike and bi-directional protectionSave repair expenses: no need to replace equipment after a lightning strike
Intelligent 1000Base-T to 1000Base-LX Dual Wavelength Single Mode SC Fiber (40 km / 24.85 miles) TFC-1000S40D3 (Version C1.1R) Must use with TFC-1000S40D5 SC-type dual-wavelength single-mode fiber port connects over distances of up to 40 km (24.85 miles) 1000Base-T Gigabit copper port supports Full-Duplex mode Supports port level SNMP management Functions as a stand alone converter or with the TFC-1600 fiber chassis The TFC-1000S40D3 Bi-Directional Intelligent Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Dual Wavelength Single Mode SC-Type fiber converter that supports port-based SNMP reporting and spans distances up to 40 km (24.85 miles). This module must be used with the TFC-1000S40D5 module. Ports include 1 x 1000Base-T (RJ-45) port and 1 x 1000Base-LX (SC Simplex Type) port. Compliant with IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX standards 1 x 1000Base-T RJ-45 port 1 x 1000Base-LX single-mode bi-directional simplex-SC type fiber port Provides Dip switch to set: Fiber (Forced / Auto-Negotiation), LLR (Enable / Disable) Support LLCF (Link Loss Carry Forward, Link Pass Through) Support LLR (Link Loss Return) for FX port Monitor and configure Ethernet or Fiber’s duplex mode, LLR, port on / off and receive link down information via management module TFC-1600MM and chassis TFC-1600 Status LED indicators for Power and Link / Activity Wall mountable Optional 19” system chassis with redundant power supply (TFC-1600), holds up to 16 TFC series Media Converters 3-year limited warranty
Peab kasutama koos TFC-1000S40D3-ga. SC-tüüpi kahe lainepikkusega ühemoodiline kiudoptiline port ühendab kuni 40 km (24,85 miili) kaugusele. 1000Base-T Gigabit vaskport toetab täisdupleksrežiimi Toetab pordi tasandi SNMP-haldust Toimib iseseisva muundurina või koos TFC-1600 kiudoptilise šassiiga TFC-1000S40D5 kahesuunaline intelligentne kiudkonverter töötab koos TFC-1600 šassiisüsteemiga või iseseisva seadmena. See muundur on kahe lainepikkuse ühe režiimiga SC-tüüpi kiudkonverter, mis toetab pordipõhist SNMP-aruandlust ja ulatub kuni 40 km (24,85 miili) kaugusele. Seda moodulit tuleb kasutada koos mooduliga TFC-1000S40D3. Pordid on 1 x 1000Base-T (RJ-45) port ja 1 x 1000Base-LX (SC Simplex-tüüpi) port. Vastab standarditele IEEE 802.3ab 1000Base-T ja IEEE 802.3z 1000Base-LX. 1 x 1000Base-T RJ-45 port 1 x 1000Base-LX ühemoodiline kahesuunaline simplex-SC-tüüpi kiudoptiline port Pakub Dip lüliti seadistamiseks: Fiber (Forced / Auto-Negotiation), LLR (Enable / Disable). Toetab LLCF (Link Loss Carry Forward, Link Pass Through). Toetab LLR (link Loss Return) FX-porti jaoks. Jälgib ja konfigureerib Ethernet või Fiber'i dupleksrežiimi, LLR, port on / off ja saab link down teavet juhtimismooduli TFC-1600MM ja šassii TFC-1600 kaudu. Toite ja ühenduse / aktiivsuse oleku LED-indikaatorid Seinale paigaldatav Valikuline 19-tolline süsteemikere koos üleliigse toiteallikaga (TFC-1600), mahutab kuni 16 TFC-seeria meediamuundurit.
Intelligent 1000Base-T to 1000Base-LX Single-Mode SC Fiber Converter (20km/12.4miles) TFC-1000S20 (Version C1.0R) SC-type single-mode fiber port connects over distances of up to 20km (12.4 miles) 1000Base-T Gigabit copper port supports Full-Duplex mode Supports port level SNMP management Functions as a stand alone converter or with the TFC-1600 fiber chassis The TFC-1000S20 Intelligent Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Single Mode SC-Type fiber converter that supports SNMP and spans distances up to 20km (12.4miles). Ports include 1 x 1000Base-T (RJ-45) port and 1 x 1000Base-LX (SC-Type) port. Compliant with IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX standards 1 x 1000Base-T RJ-45 port 1 x 1000Base-LX single-mode SC type fiber port Provides Dip switch to set: Fiber (Forced/Auto-Negotiation), LLR (Enable/Disable) Support LLCF (Link Loss Carry Forward, Link Pass Through) Support LLR (link Loss Return) for Fiber port Monitor and configure Ethernet or Fiber’s duplex mode, LLR, port on/off and receive link down information via management module TFC-1600MM and chassis TFC-1600 Status LED indicators for Power and Link/Activity Wall mountable Optional 19” system chassis with redundant power supply (TFC-1600), holds up to 16 TFC series Media Converters 3-year limited warranty
802.11b/g/n USB Nano wireless adapter Compatible with 802.11b/g/n, up to 300 Mbps network data transfer rate in 802.11n mode Ad-hoc and Infrastructure operation modes. WEP, WPA, WAP2 encryption support Ultra small design (34.4 mm x 18 mm x 7.7 mm)
Intelligent 1000Base-T to 1000Base-LX Single-Mode SC Fiber Converter (50km/31miles) TFC-1000S50 (Version C1.0R) SC-type single-mode fiber port connects over distances of up to 50km (31 miles) 1000Base-T Gigabit copper port supports Full-Duplex mode Supports port level SNMP management Functions as a stand alone converter or with the TFC-1600 fiber chassis The TFC-1000S50 Intelligent Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Single Mode SC-Type fiber converter that supports SNMP and spans distances up to 50km (31miles). Ports include 1 x 1000Base-T (RJ-45) port and 1 x 1000Base-LX (SC-Type) port. Compliant with IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX standards 1 x 1000Base-T RJ-45 port 1 x 1000Base-LX single-mode SC type fiber port Provides Dip switch to set: Fiber (Forced/Auto-Negotiation), LLR (Enable/Disable) Support LLCF (Link Loss Carry Forward, Link Pass Through) Support LLR (link Loss Return) for Fiber port Monitor and configure Ethernet or Fiber’s duplex mode, LLR, port on/off and receive link down information via management module TFC-1600MM and chassis TFC-1600 Status LED indicators for Power and Link/Activity Wall mountable Optional 19” system chassis with redundant power supply (TFC-1600), holds up to 16 TFC series Media Converters 3-year limited warranty
The TFC-1000S70 Intelligent Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Single Mode SC-Type fiber converter that supports SNMP and spans distances up to 70km (43.5 miles). Ports include 1 x 1000Base-T (RJ-45) port and 1 x 1000Base-LX (SC-Type) port.Andmeedastuskiirus (maksimaalne)1000 Mbit/sKaabeldustehnoloogia1000Base-T, 1000Base-LXLainepikkus1300 nmLED-indikaatoridVõimsusVõimsustarve (tüüpiline)7,2 WKasutamistemperatuur (T-T)0 - 40 °CHoiustamistemperatuur (T-T)-25 - 70 °CSuhteline õhuniiskus kasutamisel (H-H)10 - 90 protsentiSuhteline õhuniiskus (H-H) hoiustamisel5 - 90 protsentiAndmelüli protokollidCSMA/CDPistmik(ud)SC
The TFC-1600MM provides Chassis SNMP reporting and supports port based management for the TFC-1600, 16-Bay Fiber Converter Chassis System. Instant access to cooling fan and power supply status reports. Web browser based management via Ethernet port or Command Line Interface management via RS-232 serial port.Andmeedastuskiirus (maksimaalne)100 Mbit/sKaabeldustehnoloogia10Base-T, 100Base-TXÜhenduvustehnoloogiaJuhtmega ühendatudAndmelüli protokollidEthernet, Fast Ethernet, RS-232KujutegurPlug-inPacket transfer speed10/100 MbpsTäisdupleksJahI/O-pordid1x Ethernet 10Base-T/100Base-TX - RJ-451x RS-232
Extends keyboard, mouse, and monitor distances up to: 150m (490ft.) at 1280 x 1024 resolution and 100m (328ft.) at 1600 x 1200 resolution Controls multiple servers remotely when used with a KVM switch Displays high quality resolution up to 1600 x 1200 pixels Provides local and remote console ports to access one computer Connect the local console (transmitter) to the remote console (receiver) with an Ethernet cable Cat. 5, Cat. 5E or Cat. 6 Ethernet cable compliant Fine-tune resolution on the remote co
- 12 x Gigabit RJ-45 ports;- 10 inch wide patch panel is well suited for home and SMB applications;- Designed for Category 6 cabling;- Includes cable management holders, tie, and port labels;- Use with TRENDnet TC-PDT Punch Down Tool.The 12-Port Cat. 6 Unshielded Patch Panel, model TC-P12C6, provides a 250MHz connection to 12 x Gigabit RJ-45 Ethernet ports. This 10 inch wide patch panel is well suited for home and SMB applications. Control cable clutter with included removable cable pass-through holders and cable ties. A writing surface above each port allows users to label respective connections. Use with TRENDnet’s Punch Down Tool with 110 and Krone Blade, model TC-PDT, and RJ-11/RJ-45 Crimp/Cut/Strip Tool, model TC-CT68.- 12 x 1000Base-T Gigabit RJ-45 ports;- Supports a 250MHz connection;- 10 inch wide patch panel;- Cat. 6 color coded labeling for T568A and T568B wiring schemes;- IDC terminal blocks are compatible with 110 and Krone style connectors;- Labels above each port;- Cat. 6 transmission performance compliant with ANSI, TIA, and EIA 568 B.2 standards;- Nylon cable ties and holders included.Kaabeldustehnoloogia1000Base-TVõrgu omadusedGigabit EthernetPortide hulk12Pistmik(ud)RJ-45Toetatud kaablitüübidCat6Toote värvMustSertifikaatCE, FCCLaius254 mmKõrgus30 mmSügavus44 mmKaal230 g
D-SUB kestad on loodud D-SUB pistikute kaitseks ja pingevähenduseks. Neil on 9-positsiooniline disain, plastkorpus metallkattega vastupidavuse tagamiseks ning sirge kaabli sisseviik lihtsaks kaabli sisestamiseks. Kruvi võimaldab turvalist ja reguleeritavat kaabli kinnitust.Põhikirjeldus:Tüüp: D-SUB katePositsioonid: 9Materjal: Plastik, metallkattegaKaabli sisseviik: SirgeKinnituse mehhanism: KruviKeerme tüüp: UNC 4-40Need D-SUB korgid sobivad ideaalselt rakendustele, mis vajavad kaitset ja pingevähendust D-SUB pistikute jaoks erinevates elektroonilistes ja tööstuslikes keskkondades.
Versatile socket operation modes, including TCP Server, TCP Client, UDP Patented ADDC® (automatic data direction control) for 2-wire and 4-wire RS-485 Cascading Ethernet ports for easy wiring (applies only to RJ45 connectors) Redundant DC power inputs Warning by relay output and e-mail 10/100BaseTX (RJ45) or 100BaseFX (single mode or multimode with SC connector) IP30-rated housing OverviewNPort® IA device servers provide easy and reliable serial-to-Ethernet connectivity for industrial automation applications. The device servers can connect any serial device to an Ethernet network, and to ensure compatibility with network software, they support a variety of port operation modes, including TCP Server, TCP Client, and UDP. The rock-solid reliability of the NPort® IA device servers makes them an ideal choice for establishing network access to RS-232/422/485 serial devices such as PLCs, sensors, meters, motors, drives, barcode readers, and operator displays. All models are housed in a compact, rugged housing that is DIN-rail mountable.
Complies with the IEEE 802.3 , IEEE 802.3u and IEEE 802.3ab standards.Smart Green Ethernet technology to reduce power consumption 30%~50%.Supports Auto-MDI/MDI-X, full/half duplex modes and auto-negotiation.Supports flow control , Non-blocking and Jumbo Frame.
Complies with the IEEE 802.3 , IEEE 802.3u and IEEE 802.3ab standards.Smart Green Ethernet technology to reduce power consumption 30%~50%.Supports Auto-MDI/MDI-X, full/half duplex modes and auto-negotiation.Supports flow control , Non-blocking and Jumbo Frame.
The Cisco 1921 builds on the best-in-class offering of the Cisco 1841 Integrated Services Routers. All Cisco 1900 Series Integrated Services Routers offer embedded hardware encryption acceleration, optional firewall, intrusion prevention, and advanced security services. In addition, the platforms support the industry's widest range of wired and wireless connectivity options such as Serial, T1/E1, xDSL, Gigabit Ethernet, and third-generation (3G) wireless.
Features Performance Category 7Cable Style Simplex Cable Type Twisted PairbProduct Classification Cable - ISO/IEC Category Product Type Cable Shielded Yes Wire/Cable Type Twisted Pair Usage Conditions Installation Temperature Range 0 – 50 °COperating Temperature Range -20 – 60 °C
Võrgukaabel CAT6, U/UTP, hall CCA material unshielded LAN/network cable to connect network components with 2 x RJ45 connectors with gold plated PINs with length indication on the slimline strain relief with latch protection pair-sequence acc. to EIA/TIA 568B suitable for Gigabit (10/100/1000 Mbit) network
Built in KVM over CATx extender transmitters to control switch up to 200m away Optional redundant power supply Advanced On Screen Display - up to 16 different passwords and user profiles can be stored on the SmartView XPro Flash upgradeable firmware - as new drivers are released, free upgrades can be downloaded from the Adder website. Front panel keys - used for selecting users and channels manually. Also used for selecting auto-scan. Front panel display - 7 Segment display (red) shows the currently selected CPU. 7 Segment display (green) shows the currently selected user. Indicators show keyboard and mouse activity. Selection methods - convenient switching using On Screen Display menu, selectable keyboard hot-key, 3 button mouse, front panel key or RS232 serial control. Hot connection of devices - can be connected to many running PCs without reboot by using the keyboard and mouse reset feature. On the fly configuration - the SmartView XPro can be configured using the OSD menu. User definable hot-key commands can be used for quick channel selection. Expandable - where the size of your installation is beyond the scope of a single SmartView XPro, additional units can be cascaded. This will allow you to use multiple units to provide a video-switching network. Auto-scan - the SmartView XPro can be set to automatically scan all ports or all active ports at a user definable rate. Automatic mouse conversion - PS/2, IntelliMouse and RS232 type mice are all supported between switch and CPUs. Controlling mouse/trackball is PS/2 type. Mouse control of OSD menu. Name search facility in OSD menu. Users may select exclusive or shared computer access. Keyboard and mouse reset features for each user port. Optional CPU reminder banner may be transparent and moved around the screen. Upload and download of OSD configurations to a PC file or Excel spreadsheet. Cascaded units do not need to be configured.
Adder manufactures a remote control module which replicates the keyswitch and display on most of our KVM switch range. With the remote control module you can select an alternative CPU by pressing the button and see which CPU is currently selected on the display. The module is small and compact so it can easily be attached to your keyboard or the front of your monitor, or any other location required. Various cable lengths are available but please contact our sales desk if you require any other length. SPECIFICATION: RC1, 3m (9ft) remote control module RC1-10m, 10m (30ft) remote control module RC1-20m, 20m (60ft) remote control module RC1-30m, 30m (90ft) remote control module Adder products which currently support the RC1 are: AdderView 4OSD AdderView 8OSD AdderView USB (both variants) SmartView 4 SmartView 4PRO SmartView 8PRO SmartView 12PRO SmartView 16PRO
Adder manufactures a remote control module which replicates the keyswitch and display on most of our KVM switch range. With the remote control module you can select an alternative CPU by pressing the button and see which CPU is currently selected on the display. The module is small and compact so it can easily be attached to your keyboard or the front of your monitor, or any other location required. Various cable lengths are available but please contact our sales desk if you require any other length. SPECIFICATION: RC1, 3m (9ft) remote control module RC1-10m, 10m (30ft) remote control module RC1-20m, 20m (60ft) remote control module RC1-30m, 30m (90ft) remote control module Adder products which currently support the RC1 are: AdderView 4OSD AdderView 8OSD AdderView USB (both variants) SmartView 4 SmartView 4PRO SmartView 8PRO SmartView 12PRO SmartView 16PRO
