6-Port Cloud Managed Desktop Switch with 4-Port PoE > 4 × RJ45 10/100 Mbps PoE ports, 2 × RJ45 Gigabit ports. > 60 W total PoE budget, 802.3af/at on all PoE ports, additional Hi-PoE on orange port. > DIP switch to fast turn on/off working mode of Cloud-Managed, PoE Watchdog, Long Distance PoE. > Wide operating temperature ranging from –10 °C to 55 °C. > Supports VLAN and loop protection. > WEB-managed and centralized cloud management through the DoLynk App and performs real-time monitoring of the network. > Easy config to auto detect and set up network and security systems.
Mikrotik Chateau LTE7 (5HACD2HNDTC&R11E-LTE7) | Dual-band (2.4 GHz / 5 GHz) | Wi-Fi 5 (802.11ac) | WLAN data transfer rate (max) 1167 Mbit/s | Ethernet WAN Yes | SIM card slot Yes | 3G/4G USB modem compatibility Yes | Ethernet LAN Yes | Ethernet LAN interface type Gigabit Ethernet | Mobile network generation 4G | 1xEthernet LAN (RJ-45) ports | USB port Yes | Antenna design Internal | Power source type DC | Operating temperature (T-T) -40 - 70 C
Teltonika Altos is a 5G Wi-Fi 7 router, engineered to deliver ultra-fast and future-ready mobile broadband for modern homes, small offices, and other Fixed Wireless Access (FWA) deployments. It provides reliable high-speed 5G connectivity where traditional fibre is unavailable or too costly. Running on the feature-rich Teltonika RutOS and fully managed by the Remote Management System (RMS), Altos balances next-generation speed and enterprise-grade security in an intuitive setup.
The TL-SF1016DS Fast Ethernet Switch provides you with a high-performance, low-cost, easy-to-use, seamless and standard upgrade to improve old network to 1000Mbps network. All 16 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the TL-SF1016DS can save up to 25%* of the power consumption and 80% of the packaging material can be recycled, making it an eco-friendly solution for your business network. 16 10/100M RJ45 ports.Supports MAC address self-learning and auto MDI/MDIX.Standard 13-inch rack-mountable steel case.
Xtreme Wireless AC1200 Dual Band USB Adapter Draft 802.11ac support, up to 867 Mbps data rate Backward Compatible with 802.11a/b/g/n, 2.4/5Ghz High speed USB 2.0 interface WEP, WPA, WAP2 encryption support. Support WPS (PIN or PBC methods), external WPS button to connect Access Point easily Flash like formfactor Without USB cradle
5GHz, 16.3x8x3cm, 13dBi antenna, AirOS, POE-RJ-45 Connector, Standard 802.11n.150+ Mbps real outdoor throughput and up to 7km+ range. Featuring 2x2 MIMO technology, the new NanoStation links significantly faster and farther than ever before.New antenna array designs featuring 13dBi dual-polarity gain at 5GHz, with optimized cross-polarity isolation and in a compact form-factor.The New NanoStation M provides a secondary ethernet port with software enabled POE output for seamless IP Video integration.
Tootja: Lanberg Tootegrupp: Installation võrguseade kaabel juhtme tüüp: UTP - unschielded twisted pair kaabel, 4 pairs Category: 5e Inner conductor diameter: 0.18 mm Coating type: PVC - polyvinyl chloride Lisaandmed: The wires are made of copper conductor kaabel (CCA), Printed pikkus counter at every meter of kaabel pikkus: 305 m värv: hall Brutokaal: 7.38 kg Packaging type: box 305m
QNAP TS-432PXU-RP. Toetatud ketaste tüübid: HDD & SSD, Kõvaketta ühenduse tüüp: Jada ATA II, Jada ATA III, Toetatud ketaste suurused: 2.5,3.5". Protsessori perekond: Annapurna Labs, Protsessori tootja: Annapurna Labs, ...
Parameters Parameter Value Mounting type Flat surface mount Material ABS + PC plastic Weight 2x5 g Screws included Philips Pan Head screw #6-32×3/16 2pcs Dimensions 25 mm x 48 mm x 7.5 mm RoHS Compliant ✔ * - Teltonika devices are shown for demonstration purposes only and sold separately!
BAT120 on esimene tööstuslik UPS (katkematu toiteallikas) Teltonika Networks'i tootevalikus. BAT120 on varustatud kahe 4-poolse alalisvoolupordiga toite sisse- ja väljundi jaoks. Sisendpinge ulatub 9V kuni 30V ja väljund 12VDC, kui see töötab akupealt. Kuigi kaasaegne tehnoloogia võimaldab meil teha imelisi asju, on see siiski tundlikum kui paljud arvavad. Seadmed sõltuvad stabiilsest ja pidevast energiavarustusest, et õigesti toimida. Kuna paljud süsteemid võivad elektrivoolu kõikumise tõttu katkeda, pakub Teltonika Networks teile võimalust pakkuda stabiilset energiat ühilduvatele* seadmetele meie uusima lisandiga. Ühilduvate seadmete hulka kuuluvad: RUT2xx, RUT9xx, RUT3xx, RUTXxx, TRB1xx, TRB2xx, TSW110 ja TCR100. Teltonika Networks toob turule BAT120, katkematu toiteallika lisaseadme! See uus täiendus meie tooteportfelli pakub ühilduvatele toodetele püsivat elektrivoolu, tagades teie IoT-lahenduse pideva ühenduvuse. Teltonika Networks'i tooted taaskäivituvad pinge kõikumise korral. See turvafunktsioon võib aga häirida pidevat andmevoolu, kui vajate pidevat ühenduvust ilma vähimagi katkestuseta. Kui tekib ootamatu elektrikatkestus, võib BAT120 toita ühendatud Teltonika Networks'i seadmeid kuni 6 tundi, vältides ühenduse katkemist ja pakkudes piisavalt aega esmase elektrivõrgu taastamiseks. Seda võimaldavad kaks 18650 Li-Ion akut. Samuti saate seadistada meie ühilduvaid seadmeid saatma SMS-i või e-posti hoiatuse, kui tekib voolukatkestus, mis võimaldab teil häirega kursis olla ja selle võimalikult kiiresti kõrvaldada. Kasvavad linnad toovad rohkem tehnoloogiat ühte kohta, eriti arengumaades. Elektrivõrgu laienemine ei suuda nõudlusega sammu pidada. Elektrijaamu, mis toodavad energiat taastuvatest allikatest, nagu tuul ja päike, ei saa pidevalt optimaalselt ära kasutada, tekitades ebaühtlase elektrivoolu. Ka elektrijaama ja lõpptarbija vaheline kaugus on stabiilse energiavarustuse seisukohalt oluline. Lõpuks kahjustab elektrivõrgu ebaseaduslik ühendamine oluliselt selle üldist stabiilsust, mistõttu tuleb seda pidevalt jälgida, kuid see ei ole selliste tegevuste eest täiesti ohutu.
> Layer 2 management PoE switch > Intelligent PoE > Red port supports 90W IEEE802.3bt > Web management with friendly interface and easy operation > 250 m long distance PoE transmission > PoE watchdog > Plug and play Communication Standard: IEEE802.3; IEEE802.3u; IEEE802.3x; IEEE 802.3ab; IEEE 802.3z PoE Standard: IEEE802.3af/ IEEE802.3at/ Hi-PoE/IEEE802.3bt Port 1-16: 16 × RJ-45 10 M/100 M (PoE) Port 17-18: 2 × RJ-45 10 M/100 M/1000 M (uplink) Port 17-18: 2 × SFP 1000 M (uplink) (combo) PoE Budget: Port 1-2 ≤ 90W, Port 3-16≤ 30W, total ≤ 240W
The effective connection distance is 100 meters on Cat5e/Cat6 cable. The solution is small but very effective. The DN-95132 is an active indoor PoE midspan injector power supply designed specifically for complex backhaul and networking applications. Provides 52 V DC, 0.58 A power for external devices requiring PD power through 2 pairs of output sockets. The solution supports both 10/100 Base-T and Gigabit compatible devices. The solution works with devices that support PD PoE with a power of 30 W, such as wireless access points, WLAN routers, network cameras, IP phones, radio devices and other end devices compatible with power over Ethernet. The solution is fully compliant with the PoE IEEE802.3af standard. The device has a plastic housing protected against fire with a protection level of IP40. The solution supports a wide input voltage range of 100-240 V AC, 50 or 60 Hz. It has a detection chip inside that recognizes and classifies a power-demanding device (PD) before power is supplied to that device. Provides power only when a device supporting the PD (Power Delivery) standard is detected. provides 52 V DC, 0.58 A power for external devices requiring PD power through 2 pairs of output sockets support for both 10/100 Base-T and Gigabit compatible devices the solution supports a wide input voltage range of 100-240 V AC, 50 or 60 Hz Easy-to-use combination of power and data cables in one cable Each output port offers output current limit function, short circuit protection, full powered device detection and classification (PD) Injector can be used regardless of the operating system
Cube 60Pro ac A powerful point-to-point 60 GHz 802.11ay CPE for bridging distances up to 2.4 km. Long gone are the days when you had to rely on cables for speed and stability. 60 GHz solutions offer fiber-like speed and stability - while saving you plenty of time and money on installation and maintenance. Our latest Cube 60Pro product line is taking the advantages of 60 GHz networking to the next level – with the 802.11ay standard for even higher distances, stability, speed, and convenience. The Cube 60Pro ac CPE allows you to establish ultra-fast point-to-point connections over distances as far as 1 km. And that’s not all – we have added Channel 5* support, so you can reach even higher distances if necessary. In our tests, the Cube 60Pro ac easily maintained a reliable connection over 2.4 km. Bridging two locations has never been easier! You can get a preconfigured kit of two Cube 60Pro ac devices: the Wireless Wire Cube Pro. Just point the Cubes at one another and power them on! They will form a blazing fast encrypted wireless connection. Pure plug-and-play! Forget about downtime with the automatic 5 GHz backup connection The 60 GHz frequency is unaffected by the crowded wireless spectrum, it offers high speed and capacity. But it can sometimes struggle during bad weather conditions. That’s why both Cube 60Pro devices feature an automatic 5 GHz failover. We have added a powerful directional antenna so that the 5 GHz range can keep up with the 60 GHz.
