Aruba 570 Series Outdoor Access Points High-performance Wi-Fi 6 (802.11ax) for outdoor and hazardous location environments. Weatherproof and temperature-hardened, Aruba 570 Series access points deliver the highest Wi-Fi 6 performance in outdoor and environmentally challenging locations. The 570 high-performance and high power series deliver maximum capacity and range. It delivers 4x4:4SS MU-MIMO capability, Aruba's advanced ClientMatch and integrated Bluetooth to enable Aruba location services. Purpose-built to survive in the harshest outdoor environments, 570 Series APs withstand exposure to extreme high and low temperatures, persistent moisture and precipitation, and are fully sealed to keep out airborne contaminants. All electrical interfaces include industrial strength surge protection. Aruba Wi-Fi 6 access points provide high-performance connectivity for any organization experiencing growing numbers of IoT and mobility requirements. With a maximum aggregate on-air data rate of 3 Gbps (HE80/HE40) they deliver the speed and reliability needed for any environment. Incredible Efficiency The 570 Series APs are also designed to optimize user experience by maximizing Wi-Fi efficiency and dramatically reducing airtime contention between clients. Features include Uplink and Downlink Orthogonal Frequency Division Multiple Access (OFDMA), Downlink, Multi-User MIMO (MU MIMO) and cellular co-location. With up to 4 spatial stream and 160 MHz channel capability the 570 Series provides groundbreaking wireless capabilities for any application. Advantages of OFDMA This capability allows Aruba Wi-Fi 6 APs to handle multiple Wi-Fi 6 enabled client simultaneously on a single radio. Channel utilization is optimized by handling each transaction by matching allocated bandwidth in a channel to the offered user load. These sub divisions of the channel are referred to as Resource Units (RU). Aruba AirSliceTM for Extended OFDMA Assurance Initially, APs in controller-less mode (Instant) can provide SLA- grade performance by allocating RUs to specific traffic types. By combining Aruba's Policy Enforcement Firewall (PEF) and Layer 7 deep packet inspection (DPI) to identify user roles and applications, the APs will dynamically allocate the bandwidth needed. Non-Wi-Fi 6 clients can also benefit. Multi-User MIMO (MU-MIMO) The 570 Series APs support downlink MU-MIMO similar to Wi-Fi 5 (802.11ac Wave 2) APs. With the introduction OFDMA in Wi-Fi 6 the overhead for this capability is reduced and MU-MIMO effectiveness is substantially improved for large client counts. Wi-Fi 6 and MU-MIMO aware client optimization Aruba's patented AI-powered ClientMatch technology ensures that all clients are attached to their bestserving access point. Session metrics, network metrics, applications, client type, are used to identify and maintain best connection. Aruba Advanced Cellular Coexistence (ACC) This features uses built-in filtering to automatically minimize the impact of interference of high-power cellular base stations, in building distributed antenna systems as well as small cell and femtocell equipment. Intelligent Power Monitoring (IPM) Aruba APs continuously monitor and report hardware energy consumption. APs can be configured to enable or disable capabilities based on the available PoE power - ideal when wired switches have exhausted their power budget. Green AP energy efficiency Aruba Wi-Fi 6 APs utilize AI-powered analytics to automatically transition in and out of a sleep mode. IoT Platform Capabilities Aruba Wi-Fi 6 APs include an integrated Bluetooth 5 and 802.15.4 radio (for Zigbee support) to simplify deploying and managing IoT-based location services, asset tracking services, security solutions and IoT sensors. This allow organizations to leverage the 570 Series as an IoT platform, which eliminates the need for an overlay infrastructure and additional IT resources. Target Wake Time (TWT) Ideal for IoTs solutions that communicate infrequently, this Wi-Fi 6 capability allows IoT devices to use 802.11ax protocol. TWT coordinates with client devices to allow them to sleep for extended periods use shorter wake times to communicate before returning to sleep. This substantially extends the useful operating life of Wi-Fi 6 based battery powered sensors. Aruba Secure Infrastructure The Aruba 570 Series is an integral part of Aruba's 360 Secure Fabric to help protect user authentication and wireless traffic. WPA2-MPSK MPSK enables simpler passkey management for WPA2 devices - should the Wi-Fi password on one device change, no additional changes are needed for other devices. This feature is enabled when networks are deployed with ClearPass Policy Manager. VPN Tunnels In Remote AP (RAP) and IAP-VPN deployments, the Aruba 570 Series can be used to establish a secure SSL/IPSec VPN tunnel to a Mobility Controller that is configured as a VPN concentrator. Trusted Platform Module (TPM) For enhanced device assurance, all Aruba APs have an installed TPM for secure storage of credentials, keys and boot code. Simple and Secure Access To simplify policy enforcement, the Aruba 570 Series uses Aruba's policy enforcement firewall (PEF) features to encapsulate all traffic from the AP to the Mobility Controller (Gateway) for end-to-end encryption and inspection. Policies are applied based on context including: user role, device type, application, and location. This reduces the manual configuration of SSIDs, VLANs, and ACLs. PEF also serves as the underlying technology for Aruba Dynamic Segmentation. High-Density Connectivity Each 570 Series AP provide connectivity for a maximum of 512 associated clients per radio (1024 total). Flexible Operation and Management A unique feature of Aruba APs is the ability to operate in either controller less or controller-based mode. Controller-less (Instant) Mode In controller-less mode, one AP serves as a virtual controller for the entire network. Additional Wi-Fi Features Transmit Beamforming (TxBF) Increased signal reliability and range Passpoint Release 2 Seamless cellular-to-Wi-Fi carryover for guests Dynamic Frequency Selection (DFS) Optimized use of available RF spectrum Maximal Ratio Combining (MRC) Improved receiver performance for multi antenna access points Cyclic Delay/Shift Diversity (CDD/CSD) Enable use of multiple transmit antennas Space-Time Block Coding (STBC) Increased connection robustness Low-Density Parity Check (LDPC) High performance error detection and correction coding for enhanced receiver performance.
The Edimax Pro GP-203IT is an efficient Power over Ethernet (PoE) injector designed for reliable network connectivity. It delivers up to 90 watts of power with PoE++ support, making it suitable for various high-demand applications. With an operating temperature range of 0°C to 40°C, this device is appropriate for a wide range of environments, ensuring performance in both cool and warm conditions.Featuring a wall-mountable design and robust metal housing, the GP-203IT is built to withstand different operating conditions. Its Plug-and-Play functionality ensures easy installation, while compliance with multiple standards, including IEEE protocols and environmental regulations, makes it a versatile choice for networking solutions. The fanless design allows for silent operation, enhancing its suitability for office and commercial environments.
Aruba CX 6200 lülitite sari on järgmise põlvkonna virnastatavad juurdepääsulülitid, mis on ideaalne lahendus ettevõtete harukontoritele, ülikoolilinnakutele ja SMB võrkudele. Pilvekeskse disainiga, mis ühendab täielikult programmeeritava operatsioonisüsteemi Aruba võrguanalüüsi mootoriga, laiendab Aruba CX 6200 tööstusharu juhtivaid jälgimis- ja tõrkeotsinguvõimalusi juurdepääsukihile. Aruba NetEditi ja Aruba CX mobiilirakenduse tugi tagab konfiguratsioonide tõrgeteta ja hõlpsa juurutamise. Valmistage oma võrk ette homsete ettearvamatute nõudmiste jaoks Aruba Gen7 ASIC-arhitektuuriga, mis tagab kiire ja mitteblokeeriva jõudluse. Aruba Virtual Stacking Framework (VSF) tehnoloogia võimaldab virnastada kuni 8 lülitit, tagades skaleeritavuse ja lihtsustatud haldamise. Vahemikus on integreeritud kiired üleslingid ja kuni 740 W PoE, et toetada IoT-seadmeid, nagu turvakaamerad ja traadita pääsupunktid.
Vention IBEBN 15m UTP cat.6 network cable (black).Vention network cable will find its use both at home and at work. You will connect it to such devices as a computer, TV, router, laptop, etc. It provides transmission speeds of up to 1000 Mbps - so you can further immerse yourself in the game, download files faster and work freely. What's more, the use of high-quality materials ensures the efficient operation of the product without interference, and the PVC braid guarantees resistance to wear and tear. ManufacturerVentionModelIBEBNTransmission speed1000 MbpsThroughput250 MHzColorblackLength15 m
Flat UTP Cat 6 Network Cable Vention IBJBF 1mEnjoy fast internet in almost any situation. The Vention UTP Cat 6 network cable provides transmission speeds of up to 1000 Mbps, making it perfect for various applications. You can use it successfully while watching movies, working, or playing games, and it is compatible with many popular devices such as laptops, computers, routers, printers, smart boxes, televisions, and more. Furthermore, the cable is very easy to transport.Well-Designed ConstructionThe Vention cable stands out with its flat design and a thickness of only 1.6 mm, making installation much easier. You can easily route it under doors or behind your desk – it will fit even in very narrow spaces. It is also characterized by high flexibility and durability – it is protected from damage by a wear-resistant PVC coating. In addition, copper wires and gold-plated connectors made of phosphor bronze ensure fast transmission. It is worth noting the special lock that keeps the cable securely in place after connection, so you don't have to worry about it coming loose or falling out. BrandVentionModelIBJBFInterfaceRJ45Transmission SpeedUp to 1000 MbpsAWG32AWGMaterialPVCCable Length1m
The QNAP TRX-25GSFP28-SR SFP28 transceiver module is a networking solution designed to enhance your data center and enterprise network operations. With a 25 Gbps data transfer rate and support for Ethernet 25GBase-SR cabling, this wired connectivity technology ensures efficient and reliable data transmission over distances up to 100 m. Its dual LC female connectors and 850 nm optical wavelength are optimized for quick and secure network expansions, making it suitable for environments requiring high bandwidth and extensive network layouts. Whether upgrading your current system or setting up a new network, the QNAP TRX-25GSFP28-SR provides the performance and reliability needed to support demanding data applications.
Ubiquiti UniFi AP AC Pro (450/1300Mbps), Indoor/Outdoor, 5 pack (without PoE adapters) Interface Ethernet Local Area Network Architecture Wi-Fi Networking Form Factor External Uplink Port Type 1 x 10Base-T/100Base-TX/1000Base-T Data Link Protocol Supports Gigabit Ethernet/Fast Ethernet/Ethernet Wi-Fi Device Location External Data Bit Rate 1300 Mbps Frequency 5 GHz Encryption Algorithm TKIP WEP WPA-PSK WPA WPA2 AES Networking Compliant Standards IEEE 802.11a IEEE 802.11b IEEE 802.11g IEEE 802.1Q(VLAN) IEEE 802.3 IEEE 802.3ab IEEE 802.3af IEEE 802.3u IEEE 802.11n IEEE 802.11ac IEEE 802.3at Antenna External Certifications CE, FCC, IC LAN 2 (RJ-45) Power Device Location External Maximum Input Current 0.5 A Maximum Input Voltage 48 V External Colour White Included Accessories Mount kit Package Type Box Depth (mm) 35 mm Height (mm) 196.7 mm Width (mm) 196.7 mm Nominal Weight 0.45 kg Maximum Operating Ambient Temperature 70 °C Maximum Operating Humidity 95 % Minimum Operating Ambient Temperature -10 °C Minimum Operating Humidity 5 % Warranty Products Returnable Yes Warranty Term (month) 12 month(s) Warranty Validation Criteria Serial Number Pack Weight Brutto (kg) 0.45 kg Pieces in pack 1 Box Weight Brutto (kg) 0.45 kg Packs in Box 5
QuMax for Teltonika RUTX09 Integrated outdoor multi band high power LTE directional antennas + GPS antenna + place to install Teltonika RUTX09 (All-in-one) QuMAX offers the most powerful directional LTE antenna of all QuWireless antennas. It is dedicated to connections with long distance to base station. It is designed to have Teltonika RUTX09 router installed inside IP67 enclosure. It is the first choice for fixed installations in industrial environment. It has embedded also GPS antenna. All antennas and Teltonika router integrated in one enclosure Outdoor antenna works in any weather conditions, IP67 Antenna perfectly matched with the router Passive PoE support Easy to install Dual SIM – significantly reduce roaming costs
CAT6 UTP Patch CableVention CAT6 Patch Cord is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates. These cables deliver improved performance over standard CAT5E cables.CAT6 is completely backward-compatible with current CAT5 CAT5E equipment. Vention CAT6 Patch Cords are composed of 4 pairs 26AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard.Used to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Virtually eliminates alien crosstalk and interference.Performance rated beyond 250 MHz.
Paigaldamise tüüp35 mm DIN rööbasMaterjalMust ABS + PC plastik, S235JR terasMõõtmed90 x 70 x 25 mmKaasas kruvidPhilipsi paanipea kruvi #6-32×3/16; 2 tk.DIN 7985 M3 x 5 mm; 2 tkKaal68 g
L3 Gigabit Managed Switches DGS-3130 Series A unified software image with extensive L2 and L3 functions 6 10G ports 6kV surge protection for Gigabit Ethernet ports Optional Power over Ethernet (PoE) with a power budget of up to 740W with RPS D-Link Safeguard Engine Limited Lifetime warranty Greater port density. Extensive layer 3 features. The switches, designed for small and medium-sized companies, are equipped with a unified software image including L2 and L3 layer functions, 10-gigabit ports, are characterized by higher port density thanks to physical stacking. All this enables the DGS-3130 series switches to be used in various environments and topologies, as well as in Metro Ethernet implementations. Highest reliability Advanced L2 and L3 features include port security, Storm Control, Spanning Tree Protocols, IGMP/MLD Snooping, and IPv6 ND. Management options include a browser-based user interface in multiple languages, industry-standard CLI support, multi-image support, and multiple configurations. Six 10 Gigabit ports with physical stacking options for more ports, with built-in G.8032 Ethernet Ring Protection Switching (ERPS) that helps reduce recovery time to 50 ms. A USB 2.0 interface for storing configuration files, boot images, syslog, and support for additional redundant external power supplies on all models ensure maximum uptime. Comprehensive security They include the latest solutions such as Multi-layer, Packet Content Access Control Lists (ACL) and Storm Control. And the D-Link Safeguard Engine, designed to protect against data flooding caused by malicious attacks, maximizes business network uptime. The IP-MAC-Port Binding feature allows you to bind a source IP address to a corresponding MAC address and define a port number to increase user access control. DHCP Snooping allows the switch to learn IP/MAC address pairs by keeping them in the IMPB whitelist, giving you additional control. Easy Access Control Policies They include multiple authentication mechanisms such as 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC) and are used for accurate access control and easy deployment. After authentication, individual policies such as VLAN membership, Quality of Service (QoS), and ACL rules can be assigned to each host. Support for Microsoft NAP allows you to protect network resources from infected computers by enforcing compliance with network protection policies. Comprehensive traffic management A rich set of multi-layer QoS/CoS features always ensures priority for critical network services such as VoIP, video conferencing, IPTV and IP surveillance, and 10-gigabit ports provide adequate bandwidth. Traffic Shaping guarantees throughput for these services even when the network is busy. L2 Multicast support enables the DGS-3130 series switches to support IPTV applications. Host-based IGMP/MLD Snooping enables multiple multicast subscribers over a physical interface, while ISM VLAN enables switches to send multiple streams over multicast VLANs to save bandwidth and provide better backbone protection. ISM VLAN profiles enable easy and quick association and exchange of predefined multicast registration information on the subscriber port. Selective Q-in-Q enables you to be selective over VLAN traffic. PoE+ with a power budget of up to 740W2 The 30PS and 54PS models have a PoE power budget of 370W. After connecting additional power supplies, they can use 740W.
Discover the DIGITUS industrial switch, designed to meet the rigorous demands of modern industrial environments. This switch offers a robust solution with a 1.6 Gbps bandwidth and a 1.2 Mpps packet forwarding rate, ensuring high-speed data transfer and efficient network traffic management. Encased in a durable aluminum housing and rated IP40, it is built to withstand harsh conditions while providing reliable connectivity.Versatility is at the core of this device, featuring four 10/100Base-TX RJ-45 ports and one 100Base-FX SFP uplink port, accommodating a wide range of network configurations. It also boasts advanced protection mechanisms, including 6 kV EFT and ESD protectors, safeguarding against electrical surges and ensuring the longevity of your network infrastructure. With a power consumption of just 3 W and support for power redundancy, this switch is not only powerful but also efficient, making it an ideal choice for industrial applications seeking reliable and sustainable network solutions.
FS1018PS1 16-Port 10/100M PoE+ Switch with 1 Combo SFP Port 200W PoE power, up to 30W per port 2 10/100/1000M uplink ports + 1 SFP port 16 10/100M PoE+ ports CCTV mode supports remote PoE power up to 250m VLAN mode isolates each PoE port for security IEEE 802.3at / IEEE 802.3af compliant Plug&Play
The Gembird CFO-MDOM4-LC/LC-15M is a fiber optic network cable designed for high-performance data transmission. Compliant with OM4 standards, this cable supports speeds of up to 100 Gbps, making it suitable for various networking applications. Its duplex mode allows for efficient data transfer, while the low smoke zero halogen (LSZH) jacket ensures safer use in confined spaces. With a minimal operating temperature of -20°C and a maximum of 60°C, this cable is ideal for diverse environmental conditions.Constructed with LC/UPC multi-mode connectors on both ends, this cable features a core and cladding diameter of 50 / 125 microns. The low insertion loss of 0.3 dB and a return loss of 20 dB further enhance signal quality, ensuring optimal performance. Each connector is designed for males, ensuring a secure connection. This fiber optic cable is compliant with ISO 9002 and RoHS standards.
The Ubiquiti Vision Enhancer is designed for reliable performance in diverse environmental conditions. With its infrared and LED combo illuminator, this product can effectively illuminate distances up to 40 m, ensuring visibility in low-light situations. It operates efficiently across a wide temperature range, from -30°C to 50°C, making it ideal for various outdoor applications. Constructed from durable polycarbonate and aluminum alloy, the Vision Enhancer is built to withstand challenging weather conditions, with a weatherproof rating of IPX5. This unit also features a built-in radar device and a loudspeaker, adding functionality for surveillance and communication needs. Its compliance with IC and FCC standards further ensures quality and safety, making it a suitable choice for those seeking effective monitoring solutions.
Das geschirmte CAT 6A Keystone Modul-Set DN-93617-8 von Digitus überzeugt durch zukunftsorientierte Standards und High-End Qualität für Netzwerke. Die Module besitzen eine 360° Schirmkontaktierung, einen Rasthebel und einen wiederverschließbaren, intelligenten Kabelmanager zur Zugentlastung und Kabelfixierung. Die kompakte Bauform erlaubt eine Reiheninstallation in 483 mm (19“) 1HE Panel. Die werkzeugfreie Installation erfolgt über LSA-Leisten, farbcodiert nach EIA/TIA 568 A&B. Dank seiner kompakte Bauform passt das Modul außerdem in designkompatible modulare Anschlussdosen. Das Cat-6A Keystone Modul mit 360° Schirmung unterstützt Übertragungs-Geschwindigkeiten von bis zu 10 Gbit/s & 500 MHz in Verbindung mit Netzwerk-Verlegekabeln der Kategorie Cat 6A oder höher (Geeignet für PoE/PoE+/4PPoE). Die Kabel-Fixierung mittels wiederverschließbaren Schnellrasten ermöglicht das nachträgliche Öffnen und somit die mehrfache Verwendung des Keystonemoduls z.B. bei Feld-Anwendungen. In Verbindung mit einem modularen Patch-Panel und modularen Netzwerk-Anschlussdosen sind die Cat.6A Keystone-Module bestens für eine zeitgemäße, strukturierte Gebäude-Verkabelung geeignet. Der Montage-Anschluss des Keystonemoduls der Kategorie 6A / Klasse EA ermöglicht eine werkzeuglose Installation von Netzwerk-Kabeln mit Aderquerschnitten zwischen AWG 26/7 und 22/1.
