5GHz, 16.3x8x3cm, 13dBi antenna, AirOS, POE-RJ-45 Connector, Standard 802.11n.150+ Mbps real outdoor throughput and up to 7km+ range. Featuring 2x2 MIMO technology, the new NanoStation links significantly faster and farther than ever before.New antenna array designs featuring 13dBi dual-polarity gain at 5GHz, with optimized cross-polarity isolation and in a compact form-factor.The New NanoStation M provides a secondary ethernet port with software enabled POE output for seamless IP Video integration.
- Standard extension socket in attractive colours and of exceptional quality.- The well positioned sockets enable you to connect angular plugs.- Illuminated 2-pole ON/OFF safety switch.- With childproof sockets.AC-väljundite arv3 vahelduvvoolu kontaktSisse/välja lülitiJahToote värvValgeKaabli värvValgeKaabli pikkus5 m
Build your outdoor fiber network using our FiberCable. Lightweight and flexible, FiberCable is ideal for tower deployments of our outdoor routing and switching products, such as EdgePoint.Outdoor-Rated Jacket with RipcordIntegrated Weatherproof TapeKevlar Yarn for Added Tensile StrengthOuter Diameter of Cable: 6.0 ± 0.2 mmSix-Strand Single-Mode (G.657.A2)Outer Diameter of Fiber Strand: 0.25 mm NominalInsertion Loss1310 nm: ≤0.5 dB/km1550 nm: ≤0.5 dB/km
CCR1072-1G-8S+ is equipped with two redundant Hot Swap 12v 150W AC/DC power supplies - if one of them goes out of order, second one will take over. Hot Swap 12v 150W AC/DC power supplies for CCR1072-1G-8S+ are now available for purchase separately. You can replace them on the go to ensure zero downtime, no need to even restart the router
1 x Gigabit PoE+ sisendport 2 x Gigabit PoE väljundporti 2 x Gigabit-port 18W PoE võimsuse eelarve Lihtne veebipõhine haldusliides Toetab LACP, VLAN, QoS, STP, RTSP ja IGMP Snoopingi Voice VLAN VoIP-rakenduste jaoks Ribalaiuse juhtimine pordi kohta 10 Gbps lülitusvõimsus IEEE 802.1p QoS koos järjekordade ajastamise toetusega Kompaktne ventilaatorita disain Seinale paigaldatav metallist korpus 5-pordiline Gigabit PoE+ Powered EdgeSmart Switch koos PoE Pass Through'iga, mudel TPE-P521ES, saab toite PoE+ lülitist või injektorist, vahelduvvooluadapterit ei ole vaja. Sellel on kaks gigabitilist mitte-PoE-porti ja kaks gigabitilist PoE-porti selliste seadmete, nagu IP-kaamerad, VoIP-telefonid ja traadita juurdepääsupunktid, toiteks. Vähendades tarbetut lüliti keerukust, on see EdgeSmart lüliti varustatud ainult kõige sagedamini kasutatavate hallatavate lülitusfunktsioonidega. Lihtne veebipõhine kasutajaliides võimaldab hõlpsasti hallata VLANe, QoS-i ja seiret. Integreerimise paindlikkus Hallatavate funktsioonide hulka kuuluvad ligipääsu kontrollnimekirjad, VLAN, IGMP Snooping ja QoS paindlikuks võrguintegratsiooniks. PoE+ toiteallikaga Vahelduvvooluadapterit ei ole vaja - see kommutaator saab toite PoE+ lülitist või injektorist ning sellel on kaks gigabitilist mitte-PoE-porti ja kaks gigabitilist PoE-porti selliste seadmete nagu IP-kaamerad toiteks. EdgeSmart juhtimine Pakub hõlpsasti kasutatavat veebipõhist haldusliidest, mis vähendab lüliti konfigureerimise keerukust ja pakub kombinatsiooni sagedamini kasutatavatest SMB haldusfunktsioonidest, mis lihtsustab kasutuselevõttu. Pordid Üks gigabitine PoE+ sisendport, kaks gigabitist PoE väljundporti ja kaks gigabitist porti pakuvad 10 Gbps kommutatsioonivõimsust. PoE toide Kaks gigabitilist PoE läbipääsu porti, mille summaarne PoE-võimsuse eelarve on 18 W Kompaktne disain Kompaktse ja kerge korpuse disainiga lüliti sobib hästi lauaarvutite paigaldamiseks. Selle ventilaatorita disain sobib ideaalselt vaiksesse keskkonda, mis nõuab vaikset tööd. Võrguhaldus Lai valik võrgukonfiguratsioone on toetatud: 802.3ad linkide koondamine, 802.1Q VLAN, ribalaiuse kontroll, IGMP, loopback-tuvastus, portide peegeldamine, STP, RTSP ja 802.1p (QoS). Veaotsing Liiklusstatistika ja mugav kaabli diagnostikatest aitavad võrgu tõrkeotsingul. Korpus Kompaktne seinale paigaldatav metallist korpus LED-indikaatorid LED-indikaatorid edastavad pordi olekut
Tootekirjeldus inglise keeles: PFS3006-4ET-604-Port Fast Ethernet PoE Switch> Layer two commercial switch> Supports IEEE802.3, IEEE802.3u and IEEE802.3X standards> MAC auto learning, aging, MAC address capacity is 2K> Supports MDI/MDIX self-adaptation> RJ45 port supports 10/100 Mbps self-adaptation> Supports IEEE802.3af and IEEE803.3at power supply standards > Adopts metal enclosure> Supports Hi-PoE 60W> Supports DC 48-57V power supplyTechnical SpecificationModelPFS3006-4ET-60Ethernet Port2*10/100Mbps Uplink ports4*10/100 Mbps PoE portsPoE Power ConsumptionPort1≤60W, Port2-4≤30W, Total≤60WPoE ProtocolIEEE802.3af (PoE), IEEE802.3at (PoE+), Hi-PoESwitching Capacity1.8GbpsPacket Forwarding Rate890kppsPacket Buffer Memory768KbMAC Table Size2KFlow ControlEnable by defaultApplication Humidity10%~90%PowerDC48~57V power adapterLightning ProtectionCommon Mode 2KVDifferential Mode 0.5KVWorking Temperature-10°C~+55°CWeight0.3kgDimension(W×D×H)130mm×85mm×26mm
Schutzkontakt-Steckdosenleiste, mit sechs Anschlüssen, erhöhter Berührungsschutz, zweipoliger Ein-/Ausschalter, Dreipunktauflage zur Festmontage mit Schrauben, innovativer Flachstecker, Stecksystem DE (Stecker-Typ F)
Schutzkontakt-Steckdosenleiste, mit sechs Anschlüssen, Überspannungsschutz mit max. Ableitstrom bis zu 19.500 A, erhöhter Berührungsschutz, Master-Slave-Funktion (1x Master / 5x Slave), einstellbare Schaltwelle (ca. 8 bis 80 W), zweipoliger Ein-/Ausschalter, Gesamtleistung max. 16 A / 3.500 W, Stecksystem DE (Stecker-Typ F)
The Ubiquiti UACC-UK-Ultra-Omni-Antenna is designed to enhance Wi-Fi performance with its omni-directional functionality. With a gain of 4 dBi for 5 GHz and 3 dBi for 2.4 GHz, this antenna provides reliable connectivity, making it a choice for various environments. Its compatibility with a wide range of Wi-Fi applications ensures consistent signals and improved coverage.Bundled with a durable desktop stand, this antenna offers convenience and flexibility in placement, allowing users to optimize their Wi-Fi network with ease. Elevate connectivity needs with the Ubiquiti UACC-UK-Ultra-Omni-Antenna as it supports seamless and efficient online experiences.
Discover the full potential of your networkExperience a reliable and efficient plug-and-play network device. With 8 10/100/1000 Mbps ports with PoE function, as well as additional 2 Uplink (RJ45 1000 Mbps) and SFP (fiber 1000 Mbps) ports, the device allows you to create a flexible and scalable LAN - without unnecessary power cables, external power supplies or additional switches.Reliable communication - Widely used in any spaceThe switch is designed for users who need a reliable network connection in various environments: in home multimedia networks (movie streaming, online gaming, smart home operation), In IP surveillance (support for PoE-powered cameras), in small and medium-sized companies (Wi-Fi access points, VoIP, NAS servers), in fiber optic installations (thanks to the SFP port - e.g., interconnection between buildings). Power up and transfer data at speeds of up to 1 Gb/sDiscover new possibilities with a Qoltec device that offers: Compliant with IEEE 802.3af - offering up to 15.4W per port and up to 120W total output power for the entire switch, Automatic detection of PoE devices, SFP port for fiber optic connections, Data transmission speed up to 1Gb/s, Robust metal housing protects the electronics inside and allows for operation in more demanding conditions, Quiet operation thanks to passive cooling, Plug & Play - no configuration. Quiet operation, sturdy metal construction and instant installationOur device Offers instant and hassle-free installation, thanks to Plug &Play technology, which requires no additional configuration or technical expertise. You only need to follow a few simple steps. First, connect the devices to the appropriate RJ45 ports using the appropriate network cables and then connect one of the ports to your router or access modem. Make sure the LEDs on the switch indicate activity on the ports. The rugged metal housing protects the electronics, provides durability, resistance to electromagnetic interference and efficient heat dissipation, resulting in long and stable operation.
Patch panel is designed for use in main and intermediate distribution points of fast telecommunications systems. Is a passive part structured cabling used for termination and organize cables twisted-pair in 19" rack cabinets. Patch panels is equipped with 24 shielded RJ-45 ports category 6. Application of IDC/LSA connectors, provides fast and easy installation. Stiffened shelf with handles allows easy organization of cables and stability of assembly. - 24 shielded RJ-45 ports category 6. - Identify ports in the form of numbered fields. - Designed for 19" rack cabinets. - Height: 0.5U. - Shelf with handles for easy installation and organization. - Universal IDC/LSA connectors in accordance with T568A/B. - Color: black RAL9004.
Original part number TL-MC1400 Product name TP-Link TL-MC1400 case rack for the converters, 14 slots Producer TP-Link Class of product Media converter Network protocol and connector type 1 no data Network protocol and connector type 2 no data Height 86 mm Width 482 mm Length 358 mm Additional information tor 14 media convertersonly TL-MCXXX ver. 2.0 are compatibile (ver 1.0 not)
