UVC-G3-F-C Ubiquiti Recessed ceiling mount accessory for the UVC-G3-FLEX camera. Mount your camera inside the ceiling or a ceiling tile for a clean, low-profile installation. Includes mounting hardware for drywall, solid surface, or ceiling tile installation. Optional security screw locks the camera to the mount from above for added security. Features: Low-profile installationRequires 2 1/8" inch cutoutIncludes drywall mounting anchorsIncludes retainer for ceiling tile mountOptional security screw locks camera to mount* - UVC-G3-Flex camera is shown for demonstration purposes only and sold separately!
4 x Gigabit PoE+ porti 1 x Gigabit-port 1 x SFP-pesa 12 Gbps kommutatsioonivõimsus 65W PoE võimsuse eelarve Toetab 100/1000Base-FX kiudoptilisi SFP-mooduleid Vähendab seadmekulusid, edastades andmeid ja toite üle olemasolevate võrgukaablite IEEE 802.1p QoS ja DSCP läbipääsu tugi Kompaktne seinale paigaldatav metallist korpus Ventilaatorita disain TRENDneti 6-portiline Gigabit PoE+ Switch, mudel TPE-TG611, vähendab seadmete ja paigalduskulusid, edastades andmeid ja toite olemasolevatele Ethernet-kaablitele. See väike SFP-toega võrgukommutaator pakub nelja Gigabit PoE+ porti, mille PoE-võimsuse kogueelarve on 65 W, ühte gigabit-porti ja ühte SFP-pesa kiudoptiliste rakenduste jaoks. Tänu PoE-tehnoloogiale vajavad kasutajad ainult ühte kaablikomplekti nii andmete kui ka toite edastamiseks. SFP-toega väike võrgukommutaator võimaldab teil ühendada PoE-seadmeid, näiteks traadita pääsupunkte, IP-kaameraid, VoIP-telefone, IP-videokoodereid, juurdepääsukontrolli ja muud. Lisatud SFP-pesa toetab nii ühemoodilisi kui ka mitmemoodilisi kiudoptilisi SFP-mooduleid pikamaa kiudoptiliste võrgurakenduste jaoks. PoE+ toide SFP-toega väikesel võrgukommutaatoril on 65 W koguvõimsuse PoE-eelarve, mis varustab kuni nelja Power over Ethernet seadet. Gigabit Kuus gigabiti porti pakuvad sellele SFP-toega väikesele võrgukommutaatorile täielikku 12 Gbps lülitusvõimsust servavõrkude paigaldamiseks. Kompaktne disain Kompaktse ja kerge korpuse disainiga kompaktne kommutaator sobib hästi lauaarvutite paigaldamiseks. Selle ventilaatorita disain sobib ideaalselt vaiksesse keskkonda, mis nõuab vaikset tööd. Võrgupordid Neli gigabitilist PoE+ porti, üks gigabitiline port ja üks SFP-pesa. PoE+ Annab kuni 30 W PoE+ võimsust ühe PoE-pordi kohta, kusjuures selle väikese SFP-toega võrgukommutaatori võimsuse eelarve on 65 W. Lülitusvõimsus Selle SFP-toega väikese võrgukommutaatori lülitusvõimsus 12 Gbps Jumbo Frame Saadab suuremaid pakette ehk Jumbo raame (kuni 9KB), et suurendada jõudlust. LED-indikaatorid LED-indikaatorid edastavad pordi olekut Korpus Kompaktne ja väike võrgukommutaator seinale paigaldatava metallkorpusega
Unified AC2600 Wave2 Dualband Access Point, IEEE 802.11a/b/g/n/ac Standard, 5GHz (DFS/TPC) und 2,4GHz Frequenzbereich, bis zu 800 Mbit/s Datentransfer bei IEEE 802.11n und bis zu 1733 Mbit/s bei IEEE 802.11ac
CAT7 Flat Extension Patch CableCategory 7/Class F (ISO/IEC 11801) cable specifications require transmission frequencies of up to 600 MHz over 100 meters of fully shielded copper cabling. CAT7 cable consists of four individually shielded pairs inside an overall braided shield also known as Shielded Twisted Pair Cable (SSTP) or S/FTP (Shielded Foil Twisted Pair). CAT7 features even more stringent specifications for crosstalk and system noise than CAT6 and is designed specifically for Gigabit Ethernet applications (Gigabit over copper).Vention CAT7 Flat Network Extension Cables exceed the current ISO/IEC specifications and represent the next generation in Ethernet over copper. Network Extension Cable are excellent for extending of your LAN connection to your HDTV Blu Ray Player Home Theater XBox 360 PS3 etc. Used for network adapters hubs switches routers DSL/Cable modems patch panels and other twisted-pair applications.Used to connect your network device to any of the following: 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Backwards compatible with CAT5 CAT5e CAT6 and CAT6a equipment.Extension Cables have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Complies with TIA/EIA 568B standard.Virtually eliminates alien crosstalk and interference.Performance rated beyond 600 MHz.
CAT8 Flat Patch CableVention CAT8 Flat Patch Cables are capable of reaching up to 40Gbps transfer speeds and up to 2000MHz bandwidth. These CAT8 patch cords consist of 4 pairs 30 AWG stranded copper conductors and RJ45 connectors. Cat.8 patch cables are backwards compatible with CAT5E CAT6 CAT6A and CAT7.Used to connect your network device to any of the following: 40GBASE-T Gigabit Ethernet 25GBASE-T Gigabit Ethernet 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet CAT8 Performance for a 10GBASE-T 25GBASE-T or a 40GBASE-T channel compliant network up to 30 meters; 10Gbps support up to 100 meters. Optimize the distance and power in high density networking End of Row (EOR) Top of Rack (TOR) or Middle of Row (MOR) configurations at the data center. CAT8 supports interconnect topologies that are limited to 2 connections in a 30 meter channel for 25Gbps or 40Gbps network speeds.Vention CAT8 Flat Patch Cable provides a lower cost alternative than OM3 fiber connections under 30 meters or a SFP+ twin-axial connection under 5 meters Cat 8 Ethernet cable supports auto-negotiation for compatibility with mixed network server speeds from 1 Gbps to 40 Gbps.The superior Shielded design of this CAT8 cable includes individually foil-shielded bare copper connectors encased in a overall steel braid; fully shielded metal connectors have gold-plated RJ45 contacts and a snag-less boot with molded strain relief.Tested to support up to 2000 MHz (2 Ghz) that is 4x the frequency of CAT6A cable or CAT7 cable.
CAT8 Flat Patch CableVention CAT8 Flat Patch Cables are capable of reaching up to 40Gbps transfer speeds and up to 2000MHz bandwidth. These CAT8 patch cords consist of 4 pairs 30 AWG stranded copper conductors and RJ45 connectors. Cat.8 patch cables are backwards compatible with CAT5E CAT6 CAT6A and CAT7.Used to connect your network device to any of the following: 40GBASE-T Gigabit Ethernet 25GBASE-T Gigabit Ethernet 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet CAT8 Performance for a 10GBASE-T 25GBASE-T or a 40GBASE-T channel compliant network up to 30 meters; 10Gbps support up to 100 meters. Optimize the distance and power in high density networking End of Row (EOR) Top of Rack (TOR) or Middle of Row (MOR) configurations at the data center. CAT8 supports interconnect topologies that are limited to 2 connections in a 30 meter channel for 25Gbps or 40Gbps network speeds.Vention CAT8 Flat Patch Cable provides a lower cost alternative than OM3 fiber connections under 30 meters or a SFP+ twin-axial connection under 5 meters Cat 8 Ethernet cable supports auto-negotiation for compatibility with mixed network server speeds from 1 Gbps to 40 Gbps.The superior Shielded design of this CAT8 cable includes individually foil-shielded bare copper connectors encased in a overall steel braid; fully shielded metal connectors have gold-plated RJ45 contacts and a snag-less boot with molded strain relief.Tested to support up to 2000 MHz (2 Ghz) that is 4x the frequency of CAT6A cable or CAT7 cable.
CAT8 SSTP Patch CableVention CAT8 cables are capable of reaching up to 40Gbps transfer speeds and up to 2000MHz bandwidth. These CAT8 patch cords consist of 4 pairs 28 AWG stranded copper conductors and RJ45 connectors. Cat.8 patch cables are backwards compatible with CAT5E CAT6 CAT6A and CAT7.Used to connect your network device to any of the following: 40GBASE-T Gigabit Ethernet 25GBASE-T Gigabit Ethernet 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet CAT8 Performance for a 10GBASE-T 25GBASE-T or a 40GBASE-T channel compliant network up to 30 meters; 10Gbps support up to 100 meters. Optimize the distance and power in high density networking End of Row (EOR) Top of Rack (TOR) or Middle of Row (MOR) configurations at the data center. Cat 8 supports interconnect topologies that are limited to 2 connections in a 30 meter channel for 25Gbps or 40Gbps network speeds.Vention CAT8 patch cord provides a lower cost alternative than OM3 fiber connections under 30 meters or a SFP+ twin-axial connection under 5 meters; Cat 8 Ethernet cable supports auto-negotiation for compatibility with mixed network server speeds from 1 Gbps to 40 Gbps.The superior Shielded design of this Cat 8 cable includes individually foil-shielded bare copper connectors encased in a overall steel braid; fully shielded metal connectors have gold-plated RJ45 contacts and a snag-less boot with molded strain relief; Tested to support up to 2000 MHz (2 Ghz) that is 4x the frequency of Cat 6A cable or Cat7 cable.
Throughput: 20 Forwarding rate: 14.88 Packet buffer: 4.1 MAC address table size: 8000 Power consumption: 7.6 Mean time between failures (MTBF): 729.258 Weight: 0.95
Seda Delocki Mini DisplayPort kaablit saab kasutada DisplayPort-liidesega seadmete, nt kuvarite, projektorite või telerite ühendamiseks arvuti või sülearvutiga. Kolmekordselt varjestatud kaabel toetab kuni Ultra HD (4K @ 60 Hz) resolutsiooni ja on allapoole ühilduv Full-HD 1080p. Spetsifikatsioon - Liitmikud: 1 x mini DisplayPort isane > 1 x DisplayPort isane - Sisend = mini DisplayPort; väljund = DisplayPort - DisplayPort 1.2 spetsifikatsioon - Pin 20 ei ole ühendatud - Kaabli gabariit: 32 AWG - Kaabli läbimõõt: umbes 5,5 mm - Vaskjuht - Varjestus - Kontaktid kullatud - Audio- ja videosignaalide edastamine - Andmeedastuskiirus kuni 21,6 Gb/s - Resolutsioon kuni 3840 x 2160 @ 60 Hz (sõltuvalt süsteemist ja ühendatud riistvarast) - Värv: must - Pikkus koos pistikutega: ca 2 m Süsteeminõuded - Üks vaba mini DisplayPort-liitmik Pakendi sisu - Mini DisplayPort kaabel
See Delocki dokkimisjaam võimaldab USB-C™-liidese kaudu ühendada väliselt kuni kaks 2,5″ või 3,5″ SATA HDD- või SSD-ketast. See lahendus ei nõua välist korpust, sest ketta saab ühendada otse dokkimisjaama. Lisaks võimaldab kloonimisfunktsioon kopeerida ühe kõvaketta sisu teisele ilma arvutit kasutamata. Spetsifikatsioon Ühendused: 1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) USB Type-C™ emane 2 x SATA 6 Gb/s 22-pooluseline pesa 1 x alalisvoolu pesa Kiibistik: Asmedia ASM1352R Funktsiooniklahv: 1 x kloonimisnupp 1 x sisse/välja lüliti 2,5″ ja 3,5″ SATA HDD / SSD jaoks Sobib kõikidele SATA HDD-dele kuni SATA 6 Gb/s kiirusega Andmeedastuskiirus kuni 6 Gb/s LED-indikaator toite, juurdepääsu ja kopeerimise oleku kohta Mõõtmed (LxSxK): ca. 153 x 110 x 62 mm Plug & Play Toiteallika spetsifikatsioon Seina toiteallikas Sisend: V / 50 ~ 60 Hz / 1,5 A Väljund: 12 V / 3 A Maandus väljastpoolt, pluss seestpoolt Mõõdud: ø ca. 2,1 mm, seestpoolt: ø ca. 2,1 mm väljast: ø ca. 5,5 mm pikkus: ca. 10 mm Süsteeminõuded Linuxi tuum 4.9.4 või uuem versioon Mac OS 10.13.3 või uuem versioon Windows 7/7-64/8.1/8.1-64/10/10-64 Arvuti või sülearvuti, millel on vaba USB Type-C™ port Pakendi sisu Dokkimisjaam Kaabel USB-C™ isane USB-C™ isane, pikkus ca. 80 cm Väline toiteallikas 12 V / 3 A Kasutusjuhend
Seda Delocki USB 2.0 kaablit saab ühendada aktiivsesse USB-porti ja see võimaldab 5 m pikkust pikendust. 5 m pikkuste lisakaablite ühendamisega saate USB-porti pikendada kuni 25 m kaugusele. Spetsifikatsioon Pistikud: 1 x USB 2.0 Type-A isane > 1 x USB 2.0 Type-A emane Kiibistik: FE 1.1 Ühendamiseks aktiivse USB-pordi külge Kaabli mõõtmed: Kaabli mõõtmed: 28 AWG andmeliin 22 AWG toiteliin Pikendus kuni 5 x 5 m kaablitele Ühendused: kullatud Võimsus: kuni max. 500 mA Kaabli pikkus: ca 5 m Süsteeminõuded Linuxi tuum 3.2 või uuem Mac OS 10.9 või uuem Windows Vista/Vista-64/7/7-64/8.1/8.1-64/10/10-64 Arvuti või sülearvuti, millel on vaba aktiivne USB A-tüüpi port Pakendi sisu USB 2.0 pikenduskaabel 5 m
Simplify your technology transition with Intel Ethernet X710-T2L and X710-T4L network adapters. Auto-negotiation of port speeds provides maximum flexibility in dual- and quad-port 10GBASE-T configurations. These low-power power supplies also support Energy Efficient Ethernet technology to effectively reduce power consumption during periods of low data activity. The X710-T2L and X710-T4L are part of the Intel Ethernet 700 series, the foundation of server connectivity; enabling broad interoperability, critical performance optimizations and increased flexibility for network solutions across communications, cloud and enterprise IT. Interoperability across multiple speeds and media types ensures broad compatibility supported by extensive testing and validation. Intelligent offload optimization and accelerators to unlock network performance on Intel Xeon-based servers. Agility kernel drivers and Data Plane Development Kit (DPDK) for scalable packet processing. The Intel Ethernet 700 Series delivers network performance across a wide range of network port speeds with intelligent offload, advanced packet processing, and high-quality open source drivers.
Portide arv: 8 PC port: 1 x VGA(F)Konsool: 1 x USB(A)/ PS/2 (hiir) 1 x USB(A)/ PS/2 (klaviatuur) 1 x VGA (F)Kaablid: - VGA: 2048 x 1536 OP süsteemide tugi: Windows 98SE / ME / 2000 / XP / 2003 Server / Vista, Linux, Mac OS Toiteplokk: 9V DC 1A, väline, Räckitav: JAH, Garantii: 2 aastat
Full-Band 5 and 2.4 GHz Coverage The Rocket®5ac Prism covers the full 5 GHz radio band and incorporates both airMAX ac and airPrism technologies for maximum performance of wireless links in high-density areas.Revolutionary Filtering TechnologyUbiquiti’s patented airPrism technology provides breakthrough radio selectivity in unlicensed wireless band performance. airPrism technology isolates signals within the operating channel to increase capacity and throughput in co-location deployments.Designed for High PerformanceThe Rocket5ac Prism features EMI-shielded metal housing, GPS, airPrism circuitry, and the airView® real-time spectrum analyzer to deliver maximum spectral efficiency/throughput. Now with airOS®8 airOS®8 provides powerful features, including airMAX® ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.
Surface mounted data box is designed for use in high-speed data communication networks. Is a passive part structured cabling used in subscriber's points. Socket is equipped with unshielded RJ-45 port category 6. - Unshielded RJ-45 port category 6. - Universal IDC/LSA connectors in accordance with T568A/B. - Allows connection of conductors 26-22 AWG. - Very simple and quick assembly. - Color: white.
Original part number 790536 Product name Intellinet Modular plug RJ45 8P8C Cat6 UTP for solid wire 80 plugs in jar Producer Intellinet Network Solutions Class of product Network plug | coupler | boots Type of plug, coupler RJ45 plug Wiring type UTP - unschielded twisted pair cable, 4 pairs Additional information Cat6 RJ45 modular plug50 µm gold-plated contactsThree-prong terminal for solid wireFits round cableFor unshielded twisted pair applicationsStandard 8P8C design, compatible with all network RJ45 connectionsFully compatible with Category 3, 4, 5, 5e and 6 applications Colour Transparency
The DIGITUS® Fast Ethernet PoE switches are designed for medium to large network systems. The PoE function and the 19" size enable an uncomplicated integration into your network. The switches are a great choice to improve the performance and efficiency of your network.Technical Details24-port 10/100Base-TX with PoE support2-port Combo Gigabit TP/SFP UplinkPoE current output 55V DC, max. 30 W per portPoE power supply mode A, PIN 1/2(+), 3/6(-)Supports non-blocking, non-head-of-line forwardingStore and forward technology for optimized data transferAutomatic speed and half/full duplex recognition/adjustmentAuto MDI/MDI-X function16K MAC addressesIntegrated power supply unitPower supply: 390 wattsMaximum PoE output power: 370 wattsEthernet speed: Fast EthernetNumber of ports: 24PoE Power budget: 370 WPoE standard: IEEE802.3at (PoE+)
5m SFP+ 10Gbps Active Optics direct attach cable. This is highly cost-effective way to connect two SFP/SFP+ devices for very short distances, within racks and across adjacent racks. It works with all our products with SFP/SFP+ ports, including new RB4011 series (RB4011 series are not compatible with our passive direct attach cables S+DA0001 and S+DA0003)
