LTU-PRO Incorporating innovative industrial design with advanced technology, the LTU Pro is a Point-to-MultiPoint (PtMP) 5 GHz high-performance subscriber station. Based on Ubiquiti’s proprietary LTU technology, the LTU Pro is not impeded by the limitations of standard 802.11 Wi-Fi technology. It features an integrated high-gain dish for long range and high performance. Channel width flexibility (10/20/30/40/50 MHz) allows independent TX and RX channel frequency configurations anywhere within the radio band to avoid local interference. Features: PtMP CPE 1024 QAM 10/20/30/40/50 MHz channel bandwidth Central configuration management from AP side Frequency split Automatic power adjustments Router mode support Functions in a PtMP environment with the LTU-Rocket as the basestation. Featuring an integrated 24 dBi dish antenna, the LTU Pro is a 5 GHz subscriber station that functions as a CPE (Customer Premises Equipment) in a Point‑to‑MultiPoint (PtMP) environment with the LTU Rocket® as the basestation.Proprietary LTU Technology Based on Ubiquiti’s LTU technology, the LTU Pro is not impeded by the limitations of standard 802.11 Wi‑Fi technology. Its custom LTU silicon and radio architecture provide up to 600+ Mbps (1) of real TCP/IP throughput and modulation rates of up to 4096QAM (2). 1 1+ Gbps with future firmware upgrade.2 Available with future firmware upgrade. CPE Modes The LTU Pro supports both bridged and built-in hardware NAT router modes to suit your specific deployment. Frequency Split The LTU Pro can use different frequencies for TX and RX to avoid interference. Robust Pole Mount Design The LTU Pro is designed for quick yet reliable mounting on a pole. It features a built-in mechanical tilt; the mounting bracket allows convenient adjustments to the elevation with a range of ± 15°.
UFP-VIEWPORTThe UniFi Protect ViewPort allows you to view your UniFi Protect camera feeds on an HDMI display. It uses Power over Ethernet and connects to the local network hosting your cameras and connects via HDMI to a display. The UniFi Protect ViewPort offers 4K video output at 30 frames per second. Protect systems can be viewed in custom high-density camera matrix configurations.
Model: X5000R Antenna gain: 5 Security: IP address / port filtering MAC address filtering URL Filtering Management, monitoring, configuration: Internet settings Wireless settings Parental control Network settings for guests Smart QoS Power supply: 12V DC / 1A Dimensions: 241 x 147 x 48.5 mm Other features: Networking Internet configuration LAN network configuration DDNS IPTV IPv6
Tooteandmed on täiendamisel ja tõlkimisel. Kui vajate toote osas täiendavat infot või võõrkeelse teksti mõistmisel abi, andke sellest palun teada e-posti teel abi@onoff.ee. Saadame teile vastuse esimesel võimalusel. Vabandame võimalike ebamugavuste pärast!
Complete Custom Hardware for the WISP, right down to the Silicon Our core communications processing engine surpasses all of the limitations inherent to generic Wi‐Fi chips. Game-Changing LTU Technology Spectral Efficiency Comparison of 802.11n, 802.11ac, airFiber Original, and LTU by year. Industry Leading Complete Software Suite IP-67 Durability airFiber 5XHD is Water Resistant and Perfect for any Weather Conditions.
Tootja: Lanberg Tootegrupp: Patchpanel 19"&10" ports: 24 Type of ühenduspesa: 24 x RJ-45 Category: 6 Wiring type: CAT 6, Shielded, FTP-shielded 4 twisted-pair kaabel, UTP - unschielded twisted pair kaabel, 4 pairs Lisaandmed: Shelf koos handles for easy installation ja organization, universaalne IDC/LSA Ühendusi in accordance koos T568A/B, Identify ports in the form of numbepunane fields kõrgus: 0 mm laius: 0 mm sügavus: 0 mm Netokaal: 0 kg värv: hall
hEX S is a five port Gigabit Ethernet router for locations where wireless connectivity is not required. Compared to the hEX, the hEX S also features an SFP port and PoE output on the last port. It is affordable, small and easy to use, but at the same time comes with a very powerful dual core 880 MHz CPU and 256 MB RAM, capable of all the advanced configurations that RouterOS supports. The device has a USB 2.0, PoE output for Ethernet port #5 and a 1.25Gbit/s SFP cage. IPsec hardware encryption (~470 Mbps) and The Dude server package is supported, microSD slot on it provides improved r/w speed for file storage and Dude.
In-Wall 802.11ac Wave 2 Wi-Fi Access PointThe sleek and elegant UniFi In-Wall HD AP transforms an Ethernet wall connection into a simultaneous, dual-band 802.11ac Wi-Fi Access Point with 4x4 MIMO technology. For high-density environments, such as hotel suites and meeting rooms where there are numerous clients in a relatively small space, we recommend the UniFi IW HD AP. Both Wave 1 and Wave 2 APs offer 28 independent (non-overlapping) channels: three for the 2.4 GHz band and twenty-five for the 5 GHz band, including DFS channels.When you use the 2.4 GHz band in a high-density location, you encounter self-interference and channel saturation. When you use the 5 GHz band, you can deploy smaller cells (coverage areas), so you can support more clients in any cell that deploys more than one AP.With the advantages of MU-MIMO technology and 4x4 spatial streams, the UniFi IW HD AP can support more than triple the number of users than a typical Wave 1 AP.Superior Processing PowerThe UniFi IW HD AP is capable of complex operations (guest control, filtering, and other resource-intensive tasks) that may slow down a lesser-equipped AP.Power over Ethernet (PoE) StandardThe UniFi IW HD AP can be conveniently powered by an 802.3af or 802.at compliant switch. We recommend powering your UniFi devices with a UniFi PoE Switch.Quick and Simple InstallationThe UniFi IW HD AP has a refined industrial design and can be easily installed using the included mounting hardware.
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 0.25 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: Cat6 pikkus: 1 m Category: 6 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 3 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
Parameters Parameter Value Mounting type Flat surface mount Material ABS + PC plastic Weight 2x5 g Screws included Philips Pan Head screw #6-32×3/16 2pcs Dimensions 25 mm x 48 mm x 7.5 mm RoHS Compliant ✔ * - Teltonika devices are shown for demonstration purposes only and sold separately!
N300 Wireless Router > Complies with the IEEE 802.11b/g/n standard. The wireless speed reaches up to 300 Mbps for IEEE 802.11n, allowing smooth internet access. > 1 × WAN port and 3 × LAN ports that expand network coverage. > Two external antennas offer a wider signal coverage. > Automaically selects unoccupied channels. > Easily connects to the wireless network by just the press of the WPS buttons N3 Wireless Router, Available bandwidth 300 Mbps IEEE 802.11 b/g, IEEE 802.11n 1 WAN, 3x10/100M WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access DHCP, Antenna Type Omni-Directional Antenna Gain 3 dB, Number of antennas 2 Wireless Frequency Range 2.412 GHz–2.484 GHz, Included Accessories 1 × Power adapter1 × Twisted pair cables1 × User manual1 × Laws and regulations manual Power supply requirements 12 VDC, 0.5 A, Dimensions 172.0 mm × 121.0 mm × 33 mm
Tootja: Lanberg Tootegrupp: Installation võrguseade kaabel juhtme tüüp: CAT5E Category: 5e Lisaandmed: LAN kaabel category 5e FTP (shielded) gelled väline. AWG 24 (4x2x0.5mm)., The wires are made of pure copper (CU 100% bare copper). , Conductor stranding pikkus: 305 m värv: hall
hEX PoE lite is a small five port ethernet router in a plastic case it has a USB 2.0 port and PoE output. Ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! Max current is 1A per port Ethernet ports are shielded. It is affordable small and easy to use. With it’s compact design and clean looks it will fit perfectly into any SOHO environment.
The UniFi® NVR 4 is an enterprise network video recorder that integrates an NVR the UniFi Protect software and a 4-drive bay. The UNVR-4 unifies enterprise-class data protection and scalable storage with simple Plug and Play integration using the intuitive UniFi Protect software. From a desktop computer or mobile device you can access your surveillance recordings from virtually anywhere using the intuitive graphical user interface. The mobile app is available for iOS and Android-based devices. The drive bays are easily accessed from the front panel so hard drive mounting and maintenance are simple. Using four 8 TB drives in a RAID 5 configuration the UNVR-4 can provide up to 30 days of 4k video storage for 15 cameras or Full HD video storage for 50 cameras. Features: (4) 2.5"/3.5" Drive bays (1) 10G SFP+ port (1) Gigabit RJ45 port 1U rackmountable (kit included) Plug and Play UniFi Protect system with NVR Automated secure RAID 1 or RAID 5 configuration Supports USP-RPS for PSU failover
