Seda Delocki Mini DisplayPort kaablit saab kasutada DisplayPort-liidesega seadmete, nt kuvarite, projektorite või telerite ühendamiseks arvuti või sülearvutiga. Kolmekordselt varjestatud kaabel toetab kuni Ultra HD (4K @ 60 Hz) resolutsiooni ja on allapoole ühilduv Full-HD 1080p. Spetsifikatsioon - Liitmikud: 1 x mini DisplayPort isane > 1 x DisplayPort isane - Sisend = mini DisplayPort; väljund = DisplayPort - DisplayPort 1.2 spetsifikatsioon - Pin 20 ei ole ühendatud - Kaabli gabariit: 30 AWG - Kaabli läbimõõt: umbes 6 mm - Vaskjuht - Võrgu varjestus - Kontaktid kullatud - Audio- ja videosignaalide edastamine - Andmeedastuskiirus kuni 21,6 Gb/s - Resolutsioon kuni 3840 x 2160 @ 60 Hz (sõltuvalt süsteemist ja ühendatud riistvarast) - Värv: must - Pikkus koos pistikutega: ca 5 m Süsteeminõuded - Üks vaba mini DisplayPort-liitmik Pakendi sisu - Mini DisplayPort kaabel
See kaabel võimaldab ühendada DisplayPort-liidesega seadmed, nt monitorid või telerid, arvuti või sülearvutiga. DisplayPort on VESA standardiseeritud universaalne ühendamisstandard video- ja helisignaali edastamiseks. Spetsifikatsioon - Liitmik: DisplayPort 20-poolne isane > DisplayPort 20-poolne isane - DisplayPort 1.2 spetsifikatsioon - Pin 20 ei ole ühendatud - Kaabli gabariit: 28 AWG - Kaabli läbimõõt: umbes 7,3 mm - Vaskjuht - Kolmekordselt varjestatud kaabel - Kullatud pistikupesa - Audio- ja videosignaalide edastamine - Andmeedastuskiirus kuni 21,6 Gb/s - Resolutsioon kuni 3840 x 2160 @ 60 Hz (sõltuvalt süsteemist ja ühendatud seadmest). riistvarast) - Värv: valge - Pikkus koos pistikuga: ca 1 m Süsteeminõuded - Vaba DisplayPort-liides Pakendi sisu - DisplayPort kaabel
See Delocki kaamerakaabel võimaldab edastada Nikoni digikaamera pilte arvutisse või sülearvutisse. Ühendage lihtsalt kaabel kaamera ja süsteemi vaba USB-portiga. Spetsifikatsioon Sobib Nikon kaamerale Ühendused: 1 x USB-A isane > 1 x 8-poolne Nikon UC-E6 1 x ferriitsüdamik Kaabli pikkus: ca 1,80 m Süsteeminõuded Vaba USB-A pesaga arvuti või sülearvuti Pakendi sisu Kaabel
See Delocki USB-kaabel võimaldab USB 3.0 ühenduse pikendamist ja on varustatud väärika metallkorpusega ning kullatud pistikutega. Märkus Aktiivsete USB-seadmete, nt väliste kõvakettakappide kasutamiseks on vaja ühendatud seadme jaoks täiendavat toiteallikat. Spetsifikatsioon - Ühendused: 1 x USB 3.0 Type-A isane > 1 x USB 3.0 Type-A emane - Kaabli gabariit: 28 AWG andmeliin 24 AWG toiteliin - Paindumiskaitse liitekohal - Kaabli läbimõõt: ca 5,5 mm - Vaskjuht - Kontaktid kullatud - Ühendused kullatud punase metallkorpusega - Kaabel topeltvarjestatud - Andmeedastuskiirus kuni: SuperSpeed 5 Gbps, Hi-Speed 480 Mbit/s, Full-Speed 12 Mbit/s, Madala kiirusega 1,5 Mbit/s - Värv: Kaabel: must pistikud: punane - Pikkus koos pistikutega: ca. 2 m Süsteeminõuded - Arvuti või sülearvuti, millel on vaba USB A-tüüpi port Pakendi sisu - USB 3.0 pikenduskaabel
Current Sensor (mFi-CS) is a clip-on, alternating current (AC) sensor. It is designed for current monitoring of motors, lighting equipment, industrial hardware, or other AC electrical loads. For use with mFi mPort hardware and mFi Controller software (included with the mFi mPort). Connection Type: mFi RJ45. Input Current: 0-100A.
High Performance Gigabit Ethernet over Coaxial Solution To fulfill the needs of long distance and higher speed required Ethernet over Coaxial applications, PLANET Technology offers a new-generation Ethernet over Coaxial Converter, VC-232G. It features 1 10/100/1000BASE-T RJ45 port and 1 BNC female connector with a compact-sized metal housing, making the placement of the unit convenient. Working well with a pervasive coaxial network, the VC-232G provides an excellent bandwidth of up to a total duplex data rate of 300Mbps which can extend a maximum distance up to 1.4km. It is ideal for extending the distance and signal conversion by transmitting the Ethernet data from the coaxial cable to another 100-meter UTP cable for any type of IP network device such as HD IP camera, wireless access point, NVR and digital signage. Superior Upstream and Downstream Transmission The VC-232G is based on the two-core networking technology, Gigabit Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VC-232G offers a stable yet high-speed point-to-point network access up to a duplex data transmission of 300Mbps. It provides 2 selective transmission modes -- asymmetric mode or symmetric mode -- for the transmission of upstream and downstream signals. ■ Asymmetric mode – downstream up to 200Mbps and upstream up to 100Mbps ■ Symmetric mode – downstream up to 150Mbps and upstream up to 150Mbps The symmetric mode provides similar transmission rate on both downstream and upstream. On the other hand, the asymmetric mode performs higher transmission quality in short range. In all, when the VC-232G is in symmetric mode, it provides better upstream performance, and when it is in asymmetric mode, it gives better downstream performance. IP Ethernet over Long Distance Existing Coaxial Cables The VC-232G is also a Long Reach Ethernet (LRE) solution which provides a quick replacement and smooth migration solution from existing analog system to full digital system. A normal UTP cable can only be extended up to 100 meters, but with the VC-232G, the distance for Ethernet networking can be extended up to 1,400 meters (4,593ft.), which is ideal for the following network applications: ■ Long-distance IP network devices ■ IP digital signage ■ Cable TV to IPTV ■ Distance video education ■ Electronic billboards ■ Other applications If you have coaxial cable in your existing environment, you can install a pair of the VC-232G very simply without the need to build additional network wires, thus saving costs for network construction. Easy and Flexible Installation The VC-232G offers two operation modes, the client-side CPE and central-side CO, making any network applications easy and flexible. The CPE or CO mode can be adjusted by using the built-in DIP switch. For point-to-point connection, one VC-232G in CPE mode and the other one in CO mode must be set up as a pair of converters to perform the connection. This enables the administrator to efficiently manage the network over coaxial cable, making long-distance transmission better. Point-to-Point Application -- LAN to LAN Connection One set of the VC-232G could be used to link two local Area networks that are located in different places. Through the coaxial cable, it could set up a 200/100Mbps asymmetric backbone, but one VC-232G must be Master (CO mode) and the other one is Slave (CPE mode). Community/Campus Surveillance and Security over IP To take advantage of digital surveillance system and keep the benefits of coaxial cable, the VC-232G helps the community, campus and enterprises to upgrade analog camera system to IP camera surveillance without using additional new wires. The VC-232G is a switching architecture with one RJ45 port and one BNC Ethernet over Coaxial port. Just plug in the UTP cable of IP camera to Ethernet port and the existing coaxial cable to the BNC connector to easily deploy and extend the distance with signal conversion by transmitting the Ethernet data from the standard coaxial cable.
Description This antenna cable by Delock is suitable to supply an antenna signal in the interior of a device. Specification • Connectors: 1 x RP-SMA jack bulkhead > 1 x MHF® 4 plug • Thread length: 10 mm • Impedance: 50 Ohm • Cable: coaxial • Cable type: 0.81 • Cable attenuation: 4.9 dB @ 2.4 GHz per meter • Cable diameter: ca. 0.81 mm • Smallest bending radius: 3.24 mm • Cable colour: black • Length incl. connectors (L): ca. 35 cm System requirements • Device with one free RP-SMA or MHF® 4 port Package content • Cable • Nut and Locking Ring