Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: "Cat.6A S/FTP patch cords with 600MHz raw cable".Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.Available colours: Black, Blue, Grey, Red, White.
The DIGITUS Industrial Gigabit Switch is designed for harsh environments where it is exposed to moisture, temperature fluctuations and vibration. With a temperature range of -40°C to 85°C, the Industrial Gigabit Switch can be used under the most adverse conditions. It ensures a constant availability in highly sensitive areas such as transport, production, traffic and safety monitoring. The simple plug and play system allows the Industrial Gigabit Switch to be quickly integrated into the respective environment. With its Gigabit connectivity, the Industrial Gigabit Switch is a flexible, cost-effective solution for the industrial environment.
This USB extension cable by Delock can be connected to a USB port of your computer and enables an extension of 10 m. You can connect up to four USB devices to the Hub. In case these USB devices do not have an own power supply you may need an optional power supply, e.g. Navilock 41337, which can be connected to the Hub.
Seda Delocki Mini DisplayPort kaablit saab kasutada DisplayPort liidesega seadmete, nt. kuvarid, projektorid või telerid arvutisse või sülearvutisse. Kolmekordse varjestatud kaabel toetab eraldusvõimet kuni Ultra HD (4K @ 60 Hz) ja on allapoole ühilduv Full-HD 1080p-ga. Spetsifikatsioon • Ühendused: 1 x mini DisplayPort isane > 1 x DisplayPort isane • Sisend = mini DisplayPort; Väljund = DisplayPort • DisplayPort 1.2 spetsifikatsioon • Pin 20 pole ühendatud • Kaabli läbimõõt: 32 AWG • Kaabli läbimõõt: ca. 5,5 mm • Vaskjuht • Võrguvarjestus • Kontaktid kullatud • Heli- ja videosignaalide edastamine • Andmeedastuskiirus kuni 21,6 Gb/s • Eraldusvõime kuni 3840 x 2160 @ 60 Hz (olenevalt süsteemist ja ühendatud riistvarast) • Värvus: must • Pikkus sh. pistikud: ca. 1 m
This Wireless LAN antenna can be connected to a WLAN device with RP-SMA interface, in order to send and receive signals. Specification • Connector: RP-SMA plug • Frequency range: 2.400 - 2.500 GHz 5.150 - 5.875 GHz • Antenna gain: 5 dBi @ 2.400 - 2.500 GHz 7 dBi @ 5.150 - 5.875 GHz • Impedance: 50 Ohm • Polarisation: linear, vertical • VSWR: 2.0 • Operating temperature: -10 °C ~ 55 °C • Housing material: ABS • Colour: black • Length: ca. 231.10 mm (with tilt joint) ca. 205.00 mm (without tilt joint) • Diameter: ca. 18.40 mm (top) ca. 13.15 mm (RP-SMA) System requirements • Device with a free RP-SMA jack Package content • WLAN antenna
