Managing outdoor wireless network has never been easier: mANTBox ax 15s can provide unparalleled wireless point-to-multipoint connectivity for a vast variety of devices over a distance of 20 kilometers! A potent combination of modern dual-core ARM CPUs, our latest 802.11ax Wi-Fi 6 dual-band radios and powerful built-in sector antennas will take your signal stability, speed, and responsiveness to the next level! There’s a Gigabit Ethernet port with PoE-in and an SFP port with 2.5 Gigabit support for extra fast fiber uplinks. Upgrading your setup to Wi-Fi 6 offers multiple benefits: Speed: we’ve seen up to 40% higher speed in the 5 GHz spectrum and up to 90% higher speed in the 2.4 GHz spectrum. Security: WPA3 encryption and management frame protection prevent all sorts of attacks, like bruteforcing and WPA2 handshakecapture deauthentication attacks Reliability: seamless fast transition (roaming) enables smooth, non-stop signal when you have to switch between access points. Also, Wi-Fi 6 ensures a fair traffic distribution if the connection is shared by a large number of users. Energy efficiency: features like Target Wake Time reduce power consumption in the long run. Better for your wallet and the planet! mANTBox package includes everything you need: a Gigabit PoE injector, a power supply, a hose clamp and a fastening set, and the MikroTik quickMOUNT pro. This advanced wall mount adapter allows turning antenna within 140° both horizontally and vertically. With the quickMOUNT pro it is possible to perfectly set antenna alignment using an integrated graduated scale.
CS4226-24ET-240 26-Port Cloud Managed Desktop Switch with 24-Port PoE (240 W) > Meets the requirements of IEEE802.3,IEEE802.3u,IEEE802.3x,IEEE802.3ab,IEEE802.3z standards. > Meets the requirements of IEEE802.3af, IEEE802.3at, Hi-PoE, and IEEE802.3bt power supply standards. > Manages PoE power consumption and PoE power on/off. Supports Intelligent PoE. > A wide operating temperature range and a full metal casing that is fully-enclosed and dust-proof.
Unparalleled Tri-Band Speed — Boost your overall speeds up to 5760 Mbps (6 GHz) + 2880 Mbps (5 GHz) + 688 Mbps (2.4 GHz)Wi-Fi 7 Standard — Unleash the full potential of the 6 GHz band to double the bandwidth of the last generation.Wider Signal Coverage — Two multi-directional antennas with a magnetized base are designed for optimal signal reception.Reliable Bluetooth 5.4 – Security and reliability improvement over the last-gen high-speed Bluetooth 5.3Improved Security – The latest security enhancement, WPA3, provides enhanced protection for personal password safety.Fast Installation with USB Drive — Plug in the resource USB drive provided with Archer TBE550E to quickly drive without network. Enjoy the simple and friendly adapter installation.Multicolor Wi-Fi Status Lighting — Equipped with vibrant LED lighting effects, the base provides an intuitive indication of network status, enhancing both functionality and aesthetics.
Compact AXAGON ADM2-AM M.2 adapter with USB 10Gbps interface designed for easy use of M.2 NVMe or SATA SSDs. Reliable connection to a computer is possible thanks to a fixed USB-A cable with a length of 10 cm. The transmission rate is up to 10Gb/s thanks to the fast USB 3.2 Gen 2 interface. The second generation of fast USB interface allows you to enjoy the speed of modern M.2 SSD drives. The universal M.2 adapter also supports other modern features such as. UASP, TRIM and enables reading S.M.A.R.T. disk status monitoring information. Standby support when idle. A unique feature, thanks to the new chipset, is the possibility of using both M.2 NVMe and SATA disks. You don't have to think about which type of M.2 drive the adapter is designed for, it simply reads all types. Another advantage of the adapter is the ability to insert the disc into the adapter slot very quickly. Changing discs is also easy. These features make the adapter a very handy and useful tool for frequent work with different types of drives. This makes it an ideal tool for testing disks, transferring, backing up and restoring data, etc. Thanks to its small size, it can be readily at hand at any time. The adapter does not prevent heat dissipation from the disk, this prolongs its lifetime and also prevents the disk from slowing down the speed of the disk, so-called. Thermal Throttling. This USB-A to M.2 drive adapter can be used with computers and laptops as well as mobile phones and tablets. Input: USB 10Gbps (USB 3.2 Gen 2), connector USB-A male. Compatible with USB 3.2 Gen 1, USB4 and Thunderbolt 3/4. Device support: NMVe M.2 SSD disks, SATA M.2 SSD disks, designed for M key or B+M key card formats, NGFF 75-pin M key slot for M.2 drives. Other features: Supports transmission rates 10.000 / 5.000 / 480 Mbit/s. Support of M key or B+M key NVMe (PCI-Express) and SATA (AHCI) M.2 SSDs without maximum capacity limitation. Support for M.2 drive sizes - no length restrictions. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. The total bandwidth / transmission rate of the adapter is determined by the USB interface used (theor. 10 Gbit/s). The real adapter bandwidth / transmission rate is about 1000 MB/s (1 GB/s), it is given by the limits of the USB 3.2 Gen 2 interface. Supports BOT (Bulk-Only Transport). Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Supports TRIM functionality to limit gradual degradation of the SSD performance over time. Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition. SSD boot support in external box. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Power supply via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases. A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking). Other data: Adapter dimensions 55 x 37 x 12 mm. Adapter weight 23 g. USB-A male cable length 10 cm. Supported operating systems: Windows 7 / 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android. Compatibility depends on the operating system and device manufacturer support. Package contains: M.2 adapter with 10 cm fixed cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / SK / SWE / TR / UA / BG / CN / ARA, packed in a cardboard box with hanging hole.
The ASUS ZenWiFi BT10 offers a blend of performance, security, and convenience. This Wi-Fi system supports a wide range of wireless protocols, ensuring broad compatibility with devices and high-speed Internet access. With VPN support, users gain an extra layer of security, making it suitable for both work and leisure activities that require privacy and data protection. Its dual connectivity options cater to all scenarios, providing reliable wired connections and the freedom of wireless access. Designed to fit any space, its desktop form factor allows for easy integration into your home or office environment. Experience seamless Internet with the ASUS ZenWiFi BT10.
Archer BE700 BE15000 Tri-Band Wi-Fi 7 Router Blazing-Fast 15 Gbps Tri-Band Wi-Fi: Wi-Fi 7 unleashes the full potential of the 6 GHz band with up to 320 MHz channels and 11.5 Gbps Wi-Fi speeds. Enjoy full access to 8K streaming and high-speed downloading. 3× Faster than Wi-Fi 6E: Multi-Link Operation (MLO) enables Archer BE700 to transmit data with Wi-Fi 7 clients across the 6 GHz, 5 GHz and 2.4 GHz bands simultaneously, delivering 3× faster Wi-Fi speeds than Wi-Fi 6/6E routers. 4× Latency with Minimal Buffering: Significantly lower latency than Wi-Fi 6/6E routers enables emerging applications like VR/AR, video conferencing, and online gaming to always run at top performance. Higher Capacity for More Devices: Communicates with multiple devices via 8 streams and tri-band simultaneously. Combined with the powerful CPU, Wi-Fi 7 provides congestion-free signals to your laptop, TV, thermostat, and baby monitor. EasyMesh-Compatible: Works with EasyMesh routers and range extenders to form seamless whole home Mesh WiFi, preventing drops and lag when moving between signals TP-Link HomeShield: Enhanced security defends against the latest cyber threats.
Highly intuitive, the Smart Managed Switch can manage local networks. With the DoLynk Care platform, it can also perform cloud management. The switch performs operation and maintenance using topology visualization on front-end, transmission and back-end storage devices that are in the security system and IT system. With its full metal design, the switch has great heat dissipation and can operate in temperatures ranging -10°C to 55°C. It offers EMC and has protection against overvoltage, overcurrent, static electricity, lightning strikes, pulses and other types of interference. For the PoE series Smart Managed Switch, power is supplied up to 250 meters away. The orange port supplies up to 60 W and the red port provides up to 90 W. Also, link aggregation and STP are available on select models to ensure the network remains stable. The switch can be used in small and medium-sized businesses such as supermarkets, offices, restaurants, cafés and hotels. Meets the requirements of IEEE802.3af, IEEE802.3at, Hi-PoE, and IEEE802.3bt power supply standards Manages PoE power consumption and PoE power on/off. Supports Intelligent PoE A wide operating temperature range and a full metal casing that is fully-enclosed and dust-proof
Fiber + Power Solution for Outdoor PoE DevicesOvercome PoE limitations with the next-generation FiberPoE™, model F-POE-G2. The FiberPoE Gen 2 is a low-cost solution for outdoor deployments that require long-distance runs to reach the PoE device. Deployments with the FiberPoE Gen 2 provide significant EMI and ESD protection over typical PoE installations. The FiberPoE Gen 2 also features a durable, weatherproof form factor and enhanced surge protection. Fiber-to-Ethernet ConversionThe FiberPoE provides fiber connectivity to any PoE device.Designed for Outdoor DurabilityThe FiberPoE features an outdoor weatherproof form factor with integrated strain relief management.Power VersatilityThe FiberPoE allows separate power from standard Ethernet cables or standard terminal block / power cable support. There are three ways to configure the input and output power:
Mount your CloudKey G2 or CloudKey G2 Plus into a 19" rack with the Cloud Key G2 Rack Mount Accessory. The Cloud Key G2 and Cloud Key G2 Plus lock securely into the back of the Rack Mount Accessory for a clean and secure installation. The Cloud Key front panel display, RJ45 ethernet connector, reset button, and status LED are exposed on the front panel for easy access.- Works with CloudKey G2 and Cloud Key G2 Plus- Front-panel ethernet port for clean installation- Includes four cage nuts and M6 bolts
NanoStation LocoM5, 5 GHz, 150+ Mbps, range 10+ km, 13 dBi, Pole Mounting kit included, Power method - Passive Power over Ethernet,airMAX,EU (LOCOM5(EU))
Tooteandmed on täiendamisel ja tõlkimisel. Kui vajate toote osas täiendavat infot või võõrkeelse teksti mõistmisel abi, andke sellest palun teada e-posti teel abi@onoff.ee. Saadame teile vastuse esimesel võimalusel. Vabandame võimalike ebamugavuste pärast!
The Switch Enterprise XG 24 (USW Enterprise XG 24) is a fully managed mult-gigabit Layer 3 switch with (24) 10GbE RJ45 ports and (2) 25G SFP28 ports. The USW Enterprise XG 24 also features a 1.3" LCM color touchscreen that concisely displays key system and connection insights.Additionally the USW Enterprise XG 24 offers enhanced power supply failure protection when connected to the SmartPower Redundant Power System (USP RPS sold separately). This switch can be monitored or configured from anywhere with the powerful intuitive UniFi Network web application and mobile app.
Ubiquiti U6+ juurdepääsupunkt on loodud pakkuma tipptasemel traadita ühenduvust, kombineerides täiendavaid funktsioone ja vastupidavat konstruktsiooni. Ideaalne kõrge liiklusega keskkondadesse, ühendab see stiilse disaini uusimate tehnoloogiate ja usaldusväärse Wi-Fi jõudluse.Peamised omadused:Stiilne ja Vastupidav Disain: Läbimõõduga 160 mm ja paksusega 33 mm on see juurdepääsupunkt kompaktne ja vastupidav. Valmistatud vastupidavast polükarbonaadist ja alumiiniumist, on see disainitud taluma erinevaid keskkonnatingimusi.Mitmekesised Paigaldusvõimalused: Kaasas sein- ja laepaneeli paigaldusvõimalused, mis võimaldavad paigaldust erinevatesse keskkondadesse.Tipptehnoloogiline Traadita Ühendus:Wi-Fi 6 (802.11ax) tehnoloogia tagab kiiremad kiirus ja efektiivsus, toetades maksimaalseid andmeedastuskiirus kuni 2,4 Gbps 5 GHz sagedusalal.Kaks sagedusala: Töötab nii 2,4 GHz kui ka 5 GHz sagedusala, maksimaalse edastusvõimsusega 23 dBm mõlemal sagedusala, tagades optimaalse katvuse ja jõudluse.MIMO Tehnoloogia: Omab 2 x 2 MU-MIMO 2,4 GHz ja 5 GHz sagedusala, et parandada jõudlust ja mitme seadme samal ajal ühenduvust.Kõrge Võimsus ja Efektiivsus:Maksimaalne Energiatarve: 9W, toidetakse PoE (Power over Ethernet) kaudu, toetades pingevahemikku 44–57V DC.LED Indikaatorid: Valged ja sinised LED-id pakuvad selgeid olekuuuendusi.Tugev Traadita Turvalisus:WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3) tagab turvalised traadita ühendused.Külastajate Liiklus Isolatsioon: Toetatud, et hoida külaliste liiklus teie peamisest võrgust eraldi.Kõrge Mahutavus ja Katvus:Samaaegsed Kliendid: Toetab üle 300+ samaaegset klienti kõrge tihedusega keskkondades.Täpne QoS: Sisaldab per-kasutaja kiiruspiirangut, et efektiivselt hallata ribalaiust.Tarkvara ja Halduse Võimalused:UniFi Network Halduse: Ühildub UniFi Network versiooniga 7.3.76 ja hilisemad, võimaldades lihtsat ja intuitiivset teie võrgu haldamist.Keskkonna Spetsifikatsioonid:Töötemperatuur: -30 kuni 60°CTööniiskus: 5 kuni 95% kondenseerumataSertifikaadid: CE, FCC, IC
Netgear GS724TPP SMART switch Switches with essential L2 features for SMB networks NETGEAR Smart Managed Pro switches feature L2 and L2+/Layer 3 Lite features, excellent PoE support and improved performance. They are designed for networks that use different types of multimedia, such as video, audio and data, within a single platform. Switches increase network efficiency, reduce network operating costs and facilitate management. These switches are also a perfect solution for cutting-edge small and medium-sized enterprises that are looking for an optimal combination of functionality, efficiency and quality. Designed for large and small multimedia networks PoE and PoE+ support in every configuration VLAN with automatic voice data handling for fast and reliable VoIP telephony deployment VLAN with automatic video support, which, similarly to voice, allows you to accelerate the implementation of industrial camera infrastructure using the IP protocol Static routing helps redirect internal traffic and use network resources more efficiently IGMP and MLD protocol recognition provides advanced multicast filtering With Netgear you will build a network ready for the challenges of the future High performance with non-blocking architecture, 256 VLANs, 100 shared ACL entries, 32 static routes and 512 multicast groups Comprehensive IPv6, QoS and ACL management ensures investment protection and smooth migration to IPv6 networks PoE+ support on all ports on GS510TLP, GS510TPP, GS418TPP, GS728TPv2, GS728TPPv2, GS752TPv2 and GS752TPP SFP ports provide fiber-optic connectivity, and dedicated SFP ports on many models provide additional connection performance Energy Efficient Ethernet (IEEE 802.3az) support provides greater energy savings for unused ports and short cables Advanced QoS with incoming IPv4/IPv6 filtering (ACL) and prioritization (QoS DiffServ) Dynamic VLAN assignment means convenient authentication and access to the network regardless of location Convenient network deployment VLAN with automatic voice data handling for convenient implementation of VoIP telephony VLAN with automatic video support for convenient deployment of IP cameras The ACL wizard makes it easy to configure and access your network Smart Control Center discovers switches, making it easier to deploy, monitor and update firmware The PoE timer allows you to schedule power switching for PoE devices A smart IT department doesn't have to be big Convenient management within the browser interface or the Smart Control Center tool Standards-based technology ensures that any standard devices can be used on an existing network Duplicate firmware increases reliability and increases network uptime
Tutvustame MikroTik RouterBOARD RB750GR3, 4P MikroTik RouterBOARD RB750GR3 - usaldusväärne ja kuluefektiivne võrgulahendus nii väikestele kontoritele kui ka eramutele. Tänu oma kompaktsele disainile sobib see hõlpsasti igasse tööruumi, ilma et oleks vaja teha järeleandmisi võimsuse ja tõhususe osas. Viie Gigabit Ethernet-porti abil pakub RB750GR3 usaldusväärset ja kiiret mitme seadme ühenduvust, mistõttu on see ideaalne keskkondadesse, kus tõhusus ja kiirus on võtmetähtsusega. Selle jõuallikaks on suure jõudlusega kahetuumaline 880 MHz protsessor, mis tagab sujuva töötluse ja minimaalse viiteaja isegi suure võrgukoormuse korral. Lisaks on seade varustatud 256 MB RAM-iga, mis võimaldab hõlpsasti täita keerulisi võrguülesandeid ja hallata suuri andmemahte. RB750GR3 töötab MikroTik'i RouterOS tarkvaraga, mis pakub põhjalikku komplekti võrguvahendeid, nagu tulemüüri kaitse, ribalaiuse haldamine ja VPN-funktsioonid. See kõrge kohandamise tase võimaldab kasutajatel kohandada oma võrgu seadistust vastavalt oma konkreetsetele vajadustele, olgu see siis isiklikuks kasutamiseks, kaugtööks või väikeettevõtte keskkonnaks. Energiatõhus disain ei aita mitte ainult vähendada energiatarbimist, vaid pikendab ka seadme kasutusiga, muutes selle keskkonnasõbralikuks ja kuluefektiivseks valikuks. Lisaks võimaldab selle kasutajasõbralik kasutajaliides lihtsat seadistamist ja kasutamist, nii et isegi minimaalsete tehniliste teadmistega inimesed saavad hõlpsasti tööle hakata. 4P MikroTik RouterBOARD RB750GR3 on usaldusväärne ja mitmekülgne valik neile, kes soovivad laiendada oma võrgu võimalusi võimsa ja tõhusa ruuteriga.
The TP-Link Omada EAP625-Outdoor HD V1 is a wireless access point designed to provide robust, high-speed Internet connectivity in outdoor environments. This device is equipped with Wi-Fi 6 technology, ensuring fast data transfer rates of up to 1.8 Gbps and support for over 1000 concurrent clients. Its rugged design is IP67 rated, making it waterproof and weatherproof, suitable for any outdoor setting.With advanced security features including WPA3 encryption and multiple authentication methods, the EAP625-Outdoor HD V1 ensures a secure network environment. It also offers efficient network management through Omada Mesh technology, seamless roaming, and cloud management capabilities, allowing for easy network expansion and maintenance. Whether for a cafe terrace, an outdoor pool area, or a campus courtyard, the TP-Link Omada EAP625-Outdoor HD V1 is a suitable solution for extending high-performance wireless access to the great outdoors.