Control several multi-video enabled PCs from a single keyboard, mouse and bank of video monitors. High quality video with DDC support and resolutions up to 1920 by 1440 pixels. Dual and quad video head models available with two and four computer ports. Computer selection via keyboard hotkeys, mouse, front panel key, RS232 or remote controller. SmartBoot enables simultaneous bootup of all computers. Software independent operation ensures very wide compatibility. Reliably draws power from the attached PCs avoiding the need for an extra power supply. Flash upgradeable for future device support and enhancements. Excellent for banking, security and engineering applications. Cascadeable to support more than four computers. Hardware compatible with desktop and laptop PCs, RS6000, SGI and DEC Alphas. May be linked together to synchronously switch up to sixteen monitors.
Features and Benefits Full-gigabit Ethernet ports IEEE 802.3af/at, PoE/PoE+ standards Up to 30 watts output per PoE port 24/48 VDC flexible redundant power inputs Intelligent power consumption detection and classification Smart PoE over current and short circuit protection -40 to 75°C operating temperature range (T models) Introduction The EDS-G205A-4PoE switches are smart, 5-port, unmanaged full-gigabit Ethernet switches supporting Power-over-Ethernet on ports 2 to 5. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-G205A-4PoE switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE 802.3af/at standard devices (PD), eliminating the need for additional wiring, and they support IEEE 802.3/802.3u/802.3x with 10/100/1000M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical high-bandwidth solution for your industrial Ethernet network.
Fast Ethernet USB 2.0 to RJ45 Adapter, Chipset: AX88772C (Windows 8.1 support), Connector 1: USB A male, Connector 2: RJ 45 female Ethernet: IEEE802.3, IEEE802.3u, Max. Transfer rate: 10/100 MBit/s, Automatic speed detection Compliance with USB 2.0 standard specification, LED for USB and network
The new DIGITUS® Category 6A U-UTP patch cables are manufactured and tested to the ISO/IEC 11801 and DIN EN 50173 Category 6A specifications. DIGITUS® patch cables will guarantee the installed cabling system is compliant with the ISO & EN channel specification requirements and will provide optimum performance levels of DIGITUS® Category 6A cabling. The patch cables have a new reworked plug with bend and latch protection, which prevents the snagging of the cable and also protects the latching lever against breaking. You can easily identify the Category 6A, because of the new yellow colored connector.Kaabli pikkus1 mKaablistandardCat6aPistmik 1RJ-45Pistmik 2RJ-45Kaabli kateU/UTP (UTP)Kaabli klassEaSuguMale/MalePistmikukontaktide kateKuldKaabli värvHallSisendi näivtakistus230 ΩMantli materjalMadala suitsu null halogeen (LSZH)AWG-juhtme läbimõõt26/7Sagedus500 MHzÜhendusklemmi kaitseEiSertifikaatIEC 60332-1, IEC 61034Kasutamistemperatuur (T-T)-20 - 60 °CVäline läbimõõt5 mmKogus pakendi kohta1
The Light Head Grid (LHG) is a compact and light wireless device with an integrated 24.5 dBi grid antenna at a revolutionary price. It is perfect for point to point links or for use as a CPE at longer distances.The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables.We sell international version with working frequencies 5150MHz-5875MHz range.
CAT 6 ühenduskaabel, S/FTP (PiMF), hall vaskkattega alumiiniumjuhe (CCA) Goobay CAT-kaablid edastavad signaale tippkvaliteediga ja suure kiirusega, tagades alati stabiilse ühenduse. Ühenduskaablite ja pistikute portfelli iseloomustavad kvaliteetsed sisejuhid, tugev kaabli mantel ja täpselt sobivad pistikud. Goobay pakub alati täiuslikke tooteid teie võrguvajaduste rahuldamiseks - olenemata sellest, kas teie eesmärk on luua kodu- või ettevõtte võrk. Eelvõrgustatud, topeltvarjestatud LAN-kaabel 2x RJ45 pistikutega võrgukomponentide ühendamiseks. CAT 6 internetikaabel, mis sobib Gigabit Ethernetile kiirusega kuni 10/100/1000 Mbit/s S/FTP üldvarjestus: üksikute juhtmepaaride alumiiniumfooliumiga varjestus (PiMF) ja kaabli mantli alumiiniumpunutisega varjestus Kvaliteetne vasekattega alumiiniumjuhe (CCA) ja kullatud kontaktid tagavad suurepärase ja võimsa võrguühenduse. Painutuskaitse ja tugev PVC-mantel kaitsevad Ethernet-kaablit tõhusalt purunemise eest. RJ45-pistiku lukustuskaitse takistab lukustuse kinnijäämist või katkemist, aidates tagada usaldusväärse internetiühenduse. Võrgukaabli pikkus on näidatud ülevalatud õhukesel trossijäljel.
The LHG XL 5 ac is Long Range 5GHz 802.11ac wireless device with an integrated dual polarization 27 dBi grid antenna at a revolutionary price. It is perfect for point to point links or for use as a CPE at longer distances and supports Nv2 TDMA protocol. The device includes one 10/100/1000 Mbit Ethernet port to fully utilize speeds that 802.11ac protocol provides. - LHG XL 5 ac-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed. - LHG XL 5 ac (International) supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations). Included Parts Ethernet test resultsRBLHGG-5acD-XLIPQ-4018 1G one port testModeConfiguration1518 byte512 byte64 bytekppsMbpskppsMbpskppsMbpsBridgingnone (fast path)82.2998.2243.9999.01483.0759.3Bridging25 bridge filter rules82.2998.2215880.6217.5111.4Routingnone (fast path)82.2998.2243.9999.01489.5762.6Routing25 simple queues82.2998.2243.9999.0364.9186.8Routing25 ip filter rules82.2998.2155.1635.3151.377.5
LHG LTE6 kitGreat solution for great distances. The LHG LTE6 kit is a device for very remote locations that are within cellular network coverage. Mount it outdoors, on a pole, mast or any tall structure, and connect even where cell phones fail. Due to its large sized high gain antenna, LHG LTE6 kit can connect to cell towers in extreme rural locations, giving you the ability to provide last mile internet access where nothing else is available. The new LHG LTE6 kit features a CAT6 LTE modem, which enables carrier aggregation and allows the device to use multiple bands at the same time. A huge advantage when there are a lot of LTE users in the area. It provides better responsiveness in a crowded environment and higher efficiency for weaker signal situations in the countryside. We have seen Internet speed doubling in rural areas after switching to CAT6, so there is no need to wait for cable network expansions.
This module plate by Delock provides a hole cut-out of 8.2 mm. The simple snap-in mechanism ensures that the cover is firmly in place and can be easily changed if necessary. This module plate was designed to accommodate various connectors with an M8 external thread. For example, optionally available DC socket can be mounted. The low material thickness of only 1.5 mm provides sufficient strength while requiring little space for mounting. Easy 45 connects Easy 45 is a variable, modular system that allows components such as sockets, HDMI or USB connections to be added according to your needs. The Easy 45 modules are standardised and can be mounted in various module holder or cable ducts. Easy 45 builds the interface between electrical, network and system installation and many peripheral devices such as TV, monitors, printers, laptops and much more. Specification • Material: PC plastic • Suitable for module holder Delock Easy 45 • Suitable for 45 mm cable duct with minimum depth 45 mm • Cut-out: Ø 8.2 mm • Module size: 22.5 x 45 mm • Dimensions (LxWxH): ca. 45.0 x 22.5 x 22.0 mm • Colour: white System requirements • A free module port Delock Easy 45 (22.5 x 45 mm) Package content • 10 x module plate
he A.I.M. management server (AIM-24) is a control suite which transforms ADDERLink INFINITY extenders into a digital matrix solution. Using standard IP infrastructure it is possible to route any user station to any computer attached to the network without any compromises to video quality or control. It allows co-operative sharing of computers and the multicasting of video to any destination. Includes 24 End Point licenses (expandable up to infinite primary & failover end points) Intuitive, multi-lingual user interface Multiple switching methods Configurable user access rights Full audit trail Easy centralized management of Adder INFINITY Transmitters & Receivers Open API for 3rd party control Sun, PC and Mac compatible RJ45 Interface Hourly to Weekly automatic database backups Centralized Firmware Updates - Push updates to hundreds of devices, system-wide in minutes Adder INFINITY Manager Features - System administration Infinite Flexibility With the ADDERLink INFINITY management system (A.I.M.), you can turn multiple INFINITY point-to-point extenders into a truly scalable digital KVM matrix system that allows any workstation to link with any computer connected to the network. Point-to-point extension (local / over-IP) AV / KVM Switch multi-point matrix (over-IP) Sharing a single target (over-IP) Multicasting to many receivers (over-IP) Command Center / Video Wall Controller (over-IP) Learn more Easy centralized management of Unlimited end-points Accessed via a web browser, the INFINITY dashboard gives a real time overview of system connections and users. Tabs enable you to navigate between settings and device or user sub-menus. Secure access and communications Using TLS (transport layer security) and HTTPS ensures communications between Adder INFINITY units and A.I.M. and between A.I.M. and the outside world are all secure. Built-in security measures are compliant with universal enterprise grade security standards including SNMPv3, AES/DES encryption, and MD5/SHA authentication User access management and audit trails Each user can be granted different access permissions on a per computer basis. Administrators can also select which levels of control will be available, allowing users to choose between View only, Shared, Exclusive or Private connection modes. Reports showing the history of devices, user logins and device connections can be viewed and exported to a CSV file or via SYSLOG. Control End-points and set presets A.I.M. is used to facilitate connections between INFINITY transmitter and receiver devices through a easy centralized management system. Using Presets, a list of pre-defined connections, multiscreen, video wall or signage setups can be brought up with a single click. Redundant network operation To ensure 24/7 uptime, a second A.I.M. can be added for redundant network. The units will automatically change to the second network port if they detect a failure. Most INFINITY Transmitters and Receivers also feature dual NIC network interfaces, allowing your full solution to be easily designed for maximum resilience. Easy matrix setup The A.I.M. automatically obtains the MAC addresses of extender transmitters & receivers as they are attached to the network using Zero Configuration networking. The administrator allocates IP addresses, names and locations so that devices are easy to identify, configure and control. Open API for 3rd party control systems Adder Technology publishes a simple API structure that allows easy integration with other 3rd-party control systems supplied by companies like AMX, Crestron, HRS or MediaLon at a HTTP level. Adder INFINITY Manager Features - Intuitive user interface On-screen-display (OSD) at each user station After logging in, users choose channel connections from an intuitive OSD similar to that of a Digital TV. Users can also use Presets to change channels for multiple screens across multiple receivers. Remote OSD The remote OSD allows the user to "push" video and control to another station or to a video wall or projector. Favorites & Fast hotkey switching Video and USB switching time between computer sources is less than 1 second to provide a quality user experience. Each user can also select their favorite channels within the OSD and allocate a hotkey for faster switching between channels. USB device sharing USB sharing allows multiple users to connect to and control a single computer at the same time. Each transmitter can report 12 unique USB devices (identified by VID/PID codes) but will merge devices with the same ID to allow many more. Virtual KVM Transmitter Channels A Virtual Transmitter Channel can be setup via the management software to combine video, audio and USB from different transmitters as a single source. Ideal application where audio alerts or mixed video sources are required. LDAP integration LDAP allows integration and user authentication with a directory server such MS Active Directory, OpenLDAP or OpenDJ. To help ease setup, the systems LDAP interface can easily import users and passwords from other systems. SNMP v3 get / walk External machines can check status of the AdderLink Infinity network and units through the A.I.M. SNMP v3 security is implemented, supporting AES/DES transport with MD5/SHA authentication. External NTP server support - NTPv4.2 Connect up to 3 NTP servers with authenticated connections using MD5 and Key ID as defined in the NTP standards. All AdderLink Infinity units in an A.I.M. network now get time using authenticated NTP from A.I.M. Centralized firmware upgrades As well as managing its own firmware upgrade, A.I.M. manages the upgrade of each device on the network and can deploy firmware to hundreds of devices at the same time, meaning a system-wide upgrade takes only a few minutes. System backups Backups of the database can be saved internally, externally or emailed automatically. Automatic updates can be scheduled on an hourly, daily or weekly basis. AIM-24 Package Contents (1) AIM-24 A.I.M. server unit with integral rack brackets (1) PSU-IEC-12VDC-5A 12V, 5A Power supply + US mains cable (4) Self-adhesive rubber feet (1) Quick start guide and Safety document (1) 2-Year Limited Warranty & Lifetime World Class Support - Expandable up to 5-years
This keyboard by Delock can be wirelessly connected to a Windows, Android or iOS system via Bluetooth. The keyboard is especially suitable for tablets, smartphones, but also for small workstations that offer little space for large keyboards. Handy and small Optically, the keyboard convinces with its flat and compact design, which makes it flexible in use. A mobile workstation can thus be set up quickly. Rechargeable On the side of the keyboard there is a Micro USB female port, which can be used to charge the keyboard with the included USB cable. Specification • Connector: 1 x USB Type Micro-B female charging port • Built-in rechargeable battery (lithium-polymer) • Operating time ca. 64 hrs. with fully charged battery • Bluetooth standard 3.0 • Suitable for Windows, Android and iOS systems • Layout: German, QWERTZ • Keys: Multimedia keys ESC - F12 • LED indicator for charging, Bluetooth connection and power • 4 x rubber feet • Dimensions (LxWxH): ca. 282 x 134 x 13 mm • Colour: black System requirements • Android 10.0 or above • iOS 13.2.3 or above • Mac OS 10.15.1 or above • Windows 8.1/8.1-64/10/10-64 • PC, smartphone or tablet with Bluetooth interface Package content • Keyboard • Charging cable USB 2.0 Type Micro-B male to USB Type-A male, length ca. 50 cm • User manual
See Delocki mikrofon on mõeldud mobiilseks kasutamiseks nutitelefonis või tahvelarvutis. Sellel on suurem leviala kui sisseehitatud mikrofonidel ja see sobib ideaalselt kõnesalvestuste, intervjuude, konverentside, loengute jms salvestamiseks. Mikrofoni saab nurga alla keerata kuni 90° ja seega saab seda keerata eelistatud nurga alla. Kaasasoleva Y-adapteri abil on kõrvaklappide kasutamine endiselt võimalik. Spetsifikatsioon - Liitmik: 1 x 3,5 mm 4-poolne stereopesa audioseadme pistikupesa, isane - Suunatavus: ühesuunaline - Võimalik kuni 90° nurk - Materjal: alumiiniumist korpus, kullatud vaskpistik, terasvõrk ja ABS-vooder - Impedants: 2,2 kOhm - Tundlikkus: -38 dB +/- 3 dB - Sagedusvahemik: 50 Hz - 16 kHz - Signaali mürasuhe (SNR): ca 56 dB - Kaal: umbes 6,5 g - Värv: hõbedane Süsteeminõuded - Vaba stereopesa emakapesa, mis vastab CTIA standardile Pakendi sisu - Mikrofon - Y-adapter - Tuulekaitse
