00/100Mbps Downstream / upstream, high Performance Ethernet over VDSL Solution PLANET VC-231 is an Ethernet-over-VDSL2 Converter with high performance. It is designed based on two core networking technology, Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VDSL2 technology offers absolutely fastest data transmission speed over existing copper telephone lines without the need of rewiring. The VC-231 supports ultra-high performance to the pervasive telephone line network with up to 100/100Mbps symmetric data rate within 300m and 50/2Mbps for 1.4km long range connections. Implementing with Existing Telephone Copper Wires The VC-231 is also a Long Reach Ethernet (LRE) converter providing one RJ-45 Ethernet port and one RJ-11 phone jack that is for VDSL2 connection. By using the additional Splitter from package of VC-231, the splitter can provide POTS splitter to share the existing phone line with POTS; therefore it is no need of replacing the existing copper wiring. Just plug the VC-231 with additional splitter into the existing RJ-11 telephone jack and a high-performance VDSL2 network can be connected. The VC-231 is ideal to be used as an Ethernet extender to an existing Ethernet network. Delivering High-Demand Service Connectivity for ISP / Triple Play Devices The VC-231 provides excellent bandwidth to satisfy the triple play devices for home entertainment and communication. With the capability of 100/100Mbps symmetric data transmission, the VC-231 enables many multi-media services to work on the local Internet, such as VOD (Video on Demand), Voice over IP, Video phone, IPTV, Internet caching server, distance education, and so on. Easy & Flexible Installation The Ethernet-over-VDSL2 Converter comes with a plug-and-play design and is fully compatible with all kinds of network protocols. Moreover, the operating status of each individual port and the whole system can be watched via the rich diagnostic LEDs on the front panel. The VC-231 offers two modes, CPE and CO, for application: CPE mode is used at client side and CO mode is at central side. The CPE or CO mode can be adjusted by using a built-in DIP switch. For point-to-point connection, a CPE mode VC-231 and a CO mode VC-231 must be setup as one pair of converters to perform the connection. Providing Superior Upstream and Downstream Transmission Performance The VC-231 also defines symmetric band plan for the transmission of upstream and downstream signals, the band plan performs higher transmission quality in short range for central side (CO) in symmetric mode. In all, when the VC-231 is in profile 17a operation mode, it provides long distance transmit with Ultra-high performance to the pervasive telephone line network, and when the VC-231 is in 30a operation mode, it gives short distance transmits with upstream and downstream transmission giving wire speed performance. Ethernet Distance Extension Two VC-231 acting as a standalone pair is good for Ethernet distance extension over existing telephone wires. With just one pair of AWG-24 copper wire, you can easily connect two Ethernet networks together with the data rate of maximum 100/100Mbps. With the additional splitter, the telephone service can still be used while the VC-231 CO/CPE is in operation. The two solutions listed below are typical applications for the Ethernet over VDSL2 Converter. MTU / MDU / Hospitality Solution The VC-231 is a perfect solution to quickly providing cost-effective yet high speed network services to multi-unit buildings such as residential buildings (multi-dwelling units), commercial (multi-tenant units) buildings, hotels or hospitals. By utilizing the existing telephony infrastructure, network installation is straightforward and requires no new wiring. With up to 100/100Mbps transmission, Video on Demand, IP telephony and various broadband services can be easily provided. Last Mile of FTTx Deployment The VC-231 is an ideal solution for FTTx (Fiber to the Building, Fiber to the Campus or Fiber to the Node) applications. It supports high bandwidth VDSL2 over existing telephone wires in the “last mile” from the ISP / Telecom / Service provider’s fiber node to the buildings and customers' houses. The 10/100Mbps port of the VC-231 can be directly connected to a PC or to Ethernet devices such as Ethernet Switches or Broadband Routers. It is excellent for phone line network built under Internet because every room or house can use the existing phone line to transmit data through the Internet and the whole building can share the Internet to the wider area network at a minimum cost.
R1200 AC1200 Dual Band Smart WiFi Router AC1200 Dual Band WiFi Router 5dBi high gain antennas for large house coverage Built-in Firewall will protect your home network The guest network will protect your privacy Support VPN Clients: PPTP/L2TP/OpenVPN/WireGuard IPv6 compatible Easily encrypt your wireless security with the push of a WPS button
Price/Performance Breakthrough The EdgeRouter™ 4 offers next-generation price/performance value: up to 3.4 million packets per second processing with a line rate of up to 4 Gbps. Versatile Design The EdgeRouter 4 can be rack-mounted with the use of the EdgeRouter Rack Mount Kit model ER-RMKIT (sold separately). Centralized Management The EdgeRouter 4 is supported and managed by UNMS™ (Ubiquiti® Network Management System) a comprehensive controller with an intuitive UI. A single control plane manages registered EdgeMAX® devices across multiple sites.
With a passive twin-ax cable assembly of 1 meter and two SFP+ connectors on each side, TL-SM5220-1M is suitable for short distances and offers a cost-effective way to connect within racks and across adjacent racks.
AX1800 Wireless Dual Band Ceiling Mount Access Point - Ultra-Fast Wi-Fi 6 Speeds: Simultaneous 574 Mbps on 2.4 GHz and 1201 Mbps on 5 GHz totals 1775 Mbps Wi-Fi speeds.† - High-Density Connectivity: 4× increased capacity to connect more devices simultaneously.‡ - Integrated into Omada SDN: Zero-Touch Provisioning (ZTP)§, Centralized Cloud Management, and Intelligent Monitoring. - Centralized Management: Cloud access and Omada app for ultra convenience and easy management. - Seamless Roaming: Even video streams and voice calls are unaffected as users move between locations.? - PoE+ Support: Supports Power over Ethernet (802.3at) for convenient deployment and installation. - Secure Guest Network: Along with multiple authentication options (SMS/Facebook Wi-Fi/ Voucher, etc.) and abundant wireless security technologies. EAP620 HD Type Range Extender, Data transmission speed 1800 Mbps IEEE 802.11a, IEEE 802.11g IEEE 802.11n, IEEE 802.11ac IEEE 802.11ax, 1x10/100/1000M Antenna Type Built-in, Colour White Dimensions 243 × 243 × 64 mm
MS108GP 8-Port Gigabit Desktop Switch with 7-Port PoE+ - Full Gigabit Ports: 8× 10/100/1000 Mbps RJ45 ports - Two Cables in One: With 7 PoE+ ports, transfers data and power on one single cable - High Power PoE+: Support PoE Power up to 30 W for each PoE port and 65 W for all PoE ports - Long-Range up to 250 m: Increases PoE transmission distance to 250 m by Extend Mode - Isolation Mode: One click to divide traffic for specific ports for stability and security - Compliant with Powered Devices: Works with IEEE 802.3af/at compliant PDs - Durable Metal Casing: Allows for efficient heat dissipation and long network life - Plug and Play: Simple to use and saves time and effort
For him, power is not a problem: a simple and functional LANBERG POE+ switch The PoE+ switch is an indispensable active device in any network structure that uses power transmission over structured cabling. The RSGE-24P-2GE-2S-250 is dedicated to all installations: home, business, low-current, monitoring, IP, VoIP, cable TV networks, and in particular finds use in alarm, fire and access control infrastructures. In addition to the primary function of the switch, i.e. handling Ethernet frame traffic between ports, it additionally provides power to each device in the PoE/PoE+ 802.3af and at standards. This makes it possible to supply up to 250 W total power to devices. And all this together with simultaneous data transmission to them. This saves resources, space and the time it would take to install a separate electrical and network installation. This is particularly important if the network is dispersed and its end devices do not have access to a power source, even more so if they are mounted outdoors. No-compromise solution - viable POE budget: 250 W The switch is equipped with a total of 28 ports, including 24 PoE+ (Gigabit Ethernet), 2 Uplink (Gigabit Ethernet) and 2 Uplink (SFP Gigabit) ports. Thoughtful design and attention to component quality provides the user with up to 250 W of total real power for end devices, which means that up to: 16 IEEE 802.3af devices (max. 15 W per port) or, 8 IEEE 802.3at devices (max. 30 W per port), The remaining 4 Uplink ports (2xGigabit Ethernet and 2xSFP Gigabit) operate independently and can operate simultaneously. They are dedicated to the exchange of data traffic between the 24 PoE+ ports and external devices. In the case of monitoring/control systems, this is particularly useful, as it allows the user to rip camera recordings to the DVR while simultaneously sharing the stream further (on the second port), e.g. on the local network or on the Internet. Intelligent POE port disconnection function It is not always entirely clear how a switch will behave when the available PoE budget is exceeded. There are several possibilities: the port that exceeds the budget will be disconnected, or a random port or the most recently connected port will be disconnected. In the last case, what will be their order after a power outage and its restoration when they are all plugged into the switch at the same time? Lanberg has introduced an innovative solution in the RS series switches which, through the simplicity of the operating principle, eliminates any doubt about the mechanics of the ports. When the PoE budget is exceeded (e.g. by a device connected to port 1), the switch will start disconnecting PoE ports starting from the highest numbering until the sum of loads exceeds the available budget; while keeping the operation of the other ports intact. Those that are disconnected will remain in this state until the PoE load decreases. The function is primarily dedicated to demanding applications that emphasize safety and business continuity, where some devices must operate without interruption regardless of the situation. In such cases, Lanberg switches will allow the user to protect sensitive devices by connecting them to the lowest numbered ports. EXTEND mode up to 250 meters Standard switches, in accordance with the standard, provide the ability to operate devices at a distance of up to 100 m on one cable section. However, sometimes, due to the extensive backbone and complex environment, a custom solution that goes beyond the standard is required when developing cabling and networking. In the case of monitoring solutions, this is a fairly common problem, most often resulting from too great a distance between the distribution device and the end device. Lanberg switches have a function that enables data transmission (max. 10 Mbps) and PoE+ power supply up to 250 m on one cable section. Simply switch the button to the PoE+ Extend 250m position on the case to provide extended operation for ports 1 ~ 24. The solution has been introduced for monitoring and IP systems as well as access control, especially if end devices are located outside without the possibility of installing additional network distribution points. 4 kV surge protection The switch itself, as well as the devices connected to it, are repeatedly exposed to various threats, including electric discharges that can flow through both power and network cables. Bearing in mind the safety of devices and their users, Lanberg equipped the switch with an integrated protection system against discharges, guaranteeing 4 kV protection for all ports, effectively reducing their damage due to rapid voltage increase. Under standard conditions, the network will continue to work without interruptions, the switch will continue to work without any interruptions, and the user gains the security of the device and infrastructure. Mounting kit included - ears up to 19" The RS series of switches is characterized not only by the quality of workmanship, ease of use, functionality of the device, but also complementarity in terms of assembly and supplied accessories, where possible. Lanberg has introduced a set of accessories for versatile assembly of its switches. The RSGE-24P-2GE-2S-250 includes mounting ears for cabinets 19 and a set of mounting screws (except M6). This enables a wider application and greater freedom of installation of the RS series switches.
The TP-Link Omada SG2428LP V1 is a high-performance, smart managed switch designed to meet the demands of modern businesses. With a robust security framework, it ensures the safety of network data through encryption and access control measures. Its high-capacity networking capabilities, featuring a 56 Gbps switching capacity and support for up to 4000 VLAN groups, make it an ideal solution for complex network setups. The switch also offers efficient power and data connectivity with 16 PoE+ ports, simplifying the network infrastructure by combining power and data lines into a single cable. Additionally, the device's comprehensive network management features allow for easy setup, monitoring, and maintenance of the network, while its advanced networking features optimize traffic and enhance security. With its fanless design and durable metal housing, the TP-Link Omada SG2428LP V1 operates silently and reliably, making it a versatile choice for any business environment.
Dual-band Wi-Fi 6 with speeds up to 1500 Mb/s - 1201 Mb/s in the 5 GHz band and 300 Mb/s in the 2.4 GHz band. Seamless roaming on one unified network - Halo units work together to automatically switch between Halo systems as you move around your home using one unified Wi-Fi name and password. Connect 100+ Devices - Provide fast and stable connections for 100+ devices. Easy home network management - use the app to quickly set up and manage your Wi-Fi network. You can also manage your children's time and online content. Full Gigabit Ports - Gigabit ports for lightning-fast wired connections.
Router LT700 Outdoor LTE FDD/TDD Cat 6 AC1200 Wi-Fi 1 x Gigabit WAN/LAN Nano SIM Card Slot 802.3at/af PoE or Passive PoE 2x Internal WiFi Antennas + 2 x Detachable 4G Antennas VPN & DDNS IP65 WaterProof Turn Everywhere 4G into Speedy AC1200 Wi-FiWith 4G Cat.6 standards, LT700 Outdoor communicates with a 4G tower with speeds of up to 300 Mbps download and 50 Mbps upload. With MU-MIMO and dual-band features, the AC1200 Wi-Fi shares the fast 4G with over 30 devices while minimizing the latency.Boosted Wi-Fi Coverage with BeamformingTested Wi-Fi coverage performance in four dierent scenarios, achieved by Beamforming technology and two built-in antennas. If your space is too large for one Cudy 4G Outdoor Router to cover, you can expand your Wi-Fi coverage into a Mesh network by adding another Cudy AP.Insert a SIM, Enjoy Wi-FiInstall Wi-Fi anywhere is as easy as plugging a SIM card and booting it up with the PoE adapter. One PoE Adapter is included in the box.Pull Network to 100 m AwayPlug your Ethernet cable into the PoE adapter/switch to get up to 100 m of wired network reach. The extra cable is not included in the box.Install an AP for Indoor Wi-FiConnect an AP to the PoE adapter to equip your cafe, home, or oce with a better Wi-Fi signal. AP needs to bepurchased separately.Install Extension AntennasThe default 4G antennas are as sensitive as a standard phone's antennas. You can still replace them with customized ones via the SMA connectors.
Tutvustame Natec Bluetooth 5.0 adapterit, Fly, USB - kompaktne ja mitmekülgne lahendus teie seadmete sujuvaks traadita ühendamiseks. See USB Bluetooth-adapter on loodud uusima Bluetooth 5.0 tehnoloogiaga, mis tagab kiirema andmeedastuse, suurema vahemaa ja suurema energiatõhususe võrreldes varasemate versioonidega. Seda saab hõlpsasti ühendada ja kasutada lihtsa USB-liidese kaudu, mistõttu on see mugav valik kõigile, kes soovivad lisada oma laua- või sülearvutile Bluetooth-funktsioone. "Natec Bluetooth 5.0 adapter toetab mitmesuguseid seadmeid, sealhulgas kõrvaklappe, kõlareid, klaviatuure, hiiri ja muud, nii et seda saab hõlpsasti ühendada, et tagada katkematu ühenduvus tootlikkuse ja meelelahutuse suurendamiseks. Elegantne ja kompaktne disain tagab, et see ei sega teisi USB-porti ja sobib ideaalselt kasutamiseks liikvel olles. Tänu Nateci pühendumusele kvaliteedile ja usaldusväärsusele on see Bluetooth-adapter kohustuslik lisavarustus igale tehnoloogiahuvilisele, kes soovib oma seadmeid traadita funktsioonidega täiendada.
The simplest approach to connectivityGS1100 Series unmanaged Gigabit switches.Silent operationThe GS1100 Series features a fanless design that ensures silent operation in small or quiet office environments.Energy efficiencyThe GS1100 features Energy Efficient Ethernet (IEEE 802.3az), which automatically detects network traffic and dynamically adjusts power consumption. Zyxels eco-friendly features also adjust power usage by detecting link status and cable length. This helps reduce the companys operating costs.
