The NanoSwitch N-SW is an outdoor 4-port Gigabit switch with PoE passthrough.Power Strip Simplicity for 24V Devices Simply providing 24V 2-pair input makes NanoSwitch an outdoor 4-port unmanaged switch with "always on" 24V 2-pair output on three ports.PoE Passthrough PoE In - RJ45 port supports 10/100/1000 Ethernet connections, and supports passive 24V, 2-pair PoE to power the switch. PoE Out - RJ45 ports support 10/100/1000 Ethernet connections, and the three passive 24V, 2-pair PoE ports provide up to 24W PoE output. Designed for Outdoor Durability The NanoSwitch features an outdoor weatherproof form factor.Operating Temperature: -30 to 70° C (-22 to 158° F)
This robust industrial router is equipped with 4 x Gigabit Ethernet ports, Quad-core CPU and 256 MB of RAM. These powerful specifications combined with core RutOS software features such as advanced Firewall and RMS support makes this device a superb Industrial performer where no Cellular or WiFi connectivity is required.ETHERNETWAN1 x WAN (can be configured to LAN) 10/100/1000 Mbps, comply IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossoverLAN3 x LAN ports, 10/100/1000 Mbps, comply IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossoverNETWORKRoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2)Network protocolsTCP, UDP, IPv4, IPv6, ICMP, UDP, NTP, DNS, HTTP, FTP, SMTP, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPPVoIP passthrough supportH.232 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packetsConnection monitoringPing Reboot, Periodic Reboot, LCP and ICMP for link inspectionFirewallPort forward, traffic rules, custom rulesDHCPStatic and dynamic IP allocation, DHCP RelaydQoSTraffic priority queuing by source/destination, service, protocol or port, WMM, 802.11eDDNSSupported >25 service providers, others can be configured manuallyNetwork backupVRRPSSHFS (optional)Possibility to mount remote file system via SSH protocol (not available in standard FW)MONITORING & MANAGEMENTWEB UIHTTP, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel logFOTAFirmware update from server, automatic notification.SSHSSH (v1, v2)TR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVsystemsSNMPSNMP (v1, v2, v3), SNMP trapJSON-RPCManagement API over HTTPMODBUSMODBUS TCP status/controlRMSTeltonika Remote Management System (RMS)SYSTEM CHARACTERISTICSCPUQuad-core ARM Cortex A7, 717MHzRAM256MB, DDR2FLASH memory256MB SPI FlashFIRMWARE / CONFIGURATIONWEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backupFOTAUpdate FW/configuration from serverRMSUpdate FW/configuration for multiple devicesKeep settingsUpdate FW without losing current configurationFIRMWARE CUSTOMIZATIONOperating systemRutOS (OpenWrt based Linux OS)Supported languagesBusybox shell, Lua, C, C++Development toolsSDK package with built environment providedINPUT/OUTPUTInput1 x Digital Input (Non-isolated, Logic low 0...+5V, Logic high +8...+40V)Output1 x Digital Output (open collector type, 30V@0.3A)EventsEMAIL, RMSUSBData rateUSB 2.0ApplicationsSamba share, custom scriptsExternal devicesPossibility to connect external HDD, flash drive, additional modem, printerStorage formatsFAT, FAT32, NTFSPOWERConnector4 pin industrial DC power socketInput voltage range9 - 50 VDC, reverse polarity protection, voltage surge/transient protectionPoE (passive)Passive PoE. Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at standardsPower consumption11W Max.PHYSICAL INTERFACES (PORTS, LEDS, BUTTONS)Ethernet4 x RJ45 ports, 10/100/1000 MbpsStatus LEDs3 x connection status LEDs, 5x connection strength LEDs, 8x LAN status LEDs, 3x WAN status LEDs, 1x Power LEDPower4 pin industrial DC power socketUSBUSB A socket for external devicesResetReset/restore to default buttonPHYSICAL SPECIFICATIONCasing materialFull aluminium housingDimensions115 mm x 95 mm x 32 mm (H x W x D)Weight357 gMounting optionsDIN rail (can be mounted on two sides), flat surface placementOPERATING ENVIRONMENTOperating temperature-40 C to 75 COperating humidity10% to 90% non-condensingIngress Protection RatingIP30
5-Port 10/100/1,000 Mbps Desktop Switch Five 10/100/1,000 Mbps auto-negotiation RJ45 ports with auto MDI / MDIX supported Easily wired network expansion Compact design for flexible arrangement Plug and play setup, no configuration required Green Ethernet technology saves power by up to 82%
Abbreviated kirjeldus: SUPERSPEED USB-C10 GBPS SPEEDSTER 4 HUB External värv: Gray liides13 m USB 3.2 Gen 2: 1: 1(USB 3.2 (type C)) USB 3.0: 1(USB 3.0 (type A)) USB 2.0: 1(USB 2.0 (type A)) laius (mm): 40 mm kõrgus (mm)12 mm sügavus (mm): 87 mm Nominal kaal1Box kaal Brutto (kg): 5.6 kg Retail Packaging Netokaal Carton1
A longer version of our 100 Gigabit QSFP28 direct attach cable. This cable is 3 meters long – the perfect length to reach all the necessary spots while keeping your server room neat and tidy. Connect any two MikroTik 100 Gigabit heroes (CCR2216 & CRS504) without a hassle - this cable has integrated QSFP28 modules. Just plug it in and enjoy the speed! The cable is 3 meters long – the perfect length to reach all the necessary spots while keeping your server room neat and tidy. It is fairly flexible – you can keep your devices apart or on top of each other.
AX1800 Wireless Dual Band Ceiling Mount Access Point - Ultra-Fast Wi-Fi 6 Speeds: Simultaneous 574 Mbps on 2.4 GHz and 1201 Mbps on 5 GHz totals 1775 Mbps Wi-Fi speeds.† - High-Density Connectivity: 4× increased capacity to connect more devices simultaneously.‡ - Integrated into Omada SDN: Zero-Touch Provisioning (ZTP)§, Centralized Cloud Management, and Intelligent Monitoring. - Centralized Management: Cloud access and Omada app for ultra convenience and easy management. - Seamless Roaming: Even video streams and voice calls are unaffected as users move between locations.? - PoE+ Support: Supports Power over Ethernet (802.3at) for convenient deployment and installation. - Secure Guest Network: Along with multiple authentication options (SMS/Facebook Wi-Fi/ Voucher, etc.) and abundant wireless security technologies. EAP620 HD Type Range Extender, Data transmission speed 1800 Mbps IEEE 802.11a, IEEE 802.11g IEEE 802.11n, IEEE 802.11ac IEEE 802.11ax, 1x10/100/1000M Antenna Type Built-in, Colour White Dimensions 243 × 243 × 64 mm
Tooteandmed on täiendamisel ja tõlkimisel. Kui vajate toote osas täiendavat infot või võõrkeelse teksti mõistmisel abi, andke sellest palun teada e-posti teel abi@onoff.ee. Saadame teile vastuse esimesel võimalusel. Vabandame võimalike ebamugavuste pärast!
The Ubiquiti UniFi Switch Pro Max 16 PoE stands out as a formidable solution for businesses seeking to enhance their network infrastructure. This switch not only offers robust performance with its impressive 42 Gbps non-blocking switching throughput, 84 Gbps switching capacity, and 62.496 Mpps forwarding rate, but it also provides advanced connectivity options through its array of ports, including 12 10/100/1000 Base-T, 4 2.5GBase-T, and 2 10GBase-T SFP+ ports.Designed to cater to the needs of modern businesses, it features a comprehensive PoE support with a 180 W budget, accommodating a variety of devices from access points to surveillance cameras, thereby streamlining installation processes and reducing cable clutter. Moreover, its Layer 3 advanced switching capabilities, coupled with extensive security and network management features like VLAN support, DHCP snooping, and IGMP snooping, ensure a secure, efficient, and scalable network environment.Built to last, the switch's steel housing and ability to operate in temperatures ranging from -5°C to 40°C make it a reliable choice for any setting. Whether for a small office or a large enterprise, the Ubiquiti UniFi Switch Pro Max 16 PoE is engineered to meet the demands of any network infrastructure, offering both performance and durability.
The Ubiquiti UniFi Switch Ultra 60W is a pivotal addition to any network, designed to deliver both efficiency and reliability. With its stable DC 27 V power supply, this switch ensures that all connected devices operate smoothly, without any power interruptions. It's an ideal solution for businesses looking to enhance their network's productivity and connectivity. The switch's robust design and reliable performance make it a valuable asset for any setup, promising to elevate the operational standards of your network infrastructure.
LtAP LTE6 kit with dual core 880MHz CPU, 128MB RAM, 1 x Gigabit LAN, built-in High Power 2.4Ghz 802.11b/g/n Dual Chain wireless with integrated antenna, LTE CAT6 FG621-EA modem for International bands 1/3/5/7/8/20/28/38/40/41, internal LTE antenna, GPS, miniPCI-e slot, three miniSIM slots, RouterOS L4, outdoor enclosure, PSU, card, International version. This LtAP features a brand new Category 6 LTE modem – the same modem you’ve seen in our bestselling Chateau ax series. It supports a variety of popular LTE frequencies, like the B28 band. You can reach consistent speeds of up to 300 Mbps with carrier aggregation, as CAT6 allows devices to use two bands simultaneously. That is a huge advantage in areas with many LTE users. LtAP LTE6 provides better responsiveness in a crowded environment and higher efficiency for weaker signal situations in the countryside. Depending on the service provider, we have seen Internet speed doubling in rural areas after switching to carrier aggregation
The Ubiquiti UniFi U7 Pro Max stands out as a powerful wireless access point designed to meet the demands of modern networks. With its ability to support over 500 concurrent clients and cover up to 160 sq. m, it is perfectly suited for both small and large-scale deployments. The device's advanced features, such as 2x2 and 4x4 MIMO technology, ensure a robust and reliable connection throughout the coverage area.Security is a top priority for the U7 Pro Max, offering a range of encryption algorithms including WPA, WPA-Enterprise, WPA-PSK, WPA2, and WPA3 to safeguard your network. Additionally, the access point is equipped with Wi-Fi 6E technology, delivering fast speeds up to 8648 Mbps on the 5 GHz band. This, combined with advanced QoS, VLAN support, and Private Pre-Shared Key (PPSK) functionalities, allows for efficient network traffic management and prioritization.Installation and management are made simple with its wall and ceiling-mountable design and PoE+ support, providing flexibility in deployment. Whether you're looking to upgrade your home network or deploy a reliable solution for your business, the Ubiquiti UniFi U7 Pro Max offers a comprehensive set of features to meet your needs.
Unleash the Power of Wi-Fi 7 in the Modern Workplace Designed specifically for the modern workplace, the NWA130BE is equipped with a Qualcomm quad-core processor to deliver blazing-fast Wi-Fi 7 speeds of up to 11 Gbps and noticeable performance gains. Coupled with Zyxel Nebulas comprehensive suite of management and security innovations, it delivers robust connectivity and reliability that meets the enterprise-class demands of todays modern workplace. Blazing-fast Tri-Radio WiFi 7 (802.11be) AP The BE11000 Tri-Radio AP (2x2 in 2.4, 5, and 6 GHz) delivers blazing-fast Wi-Fi 7 speeds of up to 11 Gbps and lower latency for real-time response. 2.5G Ports the Right and Cost-Effective Fit The 2 x 2.5G Ethernet ports are the right and cost-effective solution, not only providing users with an easy upgrade to enjoy Wi-Fi 7 performance, but also enabling seamless integration with existing infrastructure without the need for costly re-wiring. Rectangular Design for Optimal SNR 4K QAM (MCS-13) requires high signal-to-noise ratio (SNR). The rectangular design provides excellent antenna isolation, surpassing the effectiveness of circular designs. As designed by RF First. The advanced RF filter design eliminates interference between 5 GHz and 6 GHz bands, while the built-in 4G/5G interference filter enables seamless interoperability with 4G/5G cellular networks and minimizes interference, all to ensure a smooth, interruption-free Wi-Fi experience. Flexible management to suit diverse requirements NebulaFlex allows users to switch between standalone and intuitive Nebula cloud-managed modes as needed.
A compact outdoor Wi-Fi 6 CPE with a powerful 16 dBi antenna, AP mode, and multiple mounting options — perfect for masts, poles, or rooftop deployments. Meet the SXTsq 5 ax — our first Wi-Fi 6 outdoor CPE, combining the best wireless technology with our trusted, compact SXTsq form factor. Despite the upgrade to Wi-Fi 6 and a modern ARM-based dual- core CPU, this unit keeps the same price point as our previous Wi-Fi 5 model — making it one of the best-value weatherproof CPEs on the market. The enclosure can withstand all sorts of unpredictable weather hazards, and it features slots for directly attaching a hose clamp in three different mounting positions, including support for horizontal railings — ideal for masts and poles in rooftop or tower deployments. Field-tested up to 3 km in high-interference, urban scenarios. Designed with the same trusted long-range architecture as previous SXT models — capable of 10+ km links in line-of-sight deployments. With RouterOS license level 4, the SXTsq 5 ax isn’t just a client — it can also be configured as a powerful access point, giving you more flexibility in planning your wireless infrastructure. And thanks to its compact square shape, it fits neatly into even the most space- sensitive deployments.
Long-range outdoor CPEs with modern Wi-Fi 6 performance, rugged design, and unbeatable pricing. Available in two models (24.5 or 27 dBi), they’re ideal for point-to-point links over great distances. This is the 24.5 dBi version. Need a fast, stable connection across large distances? Whether you’re bridging two buildings, connecting a remote site, or sharing your internet with nearby infrastructure — the new LHG Wi-Fi 6 series is built for the challenge. And here’s the best part: we’ve kept the same pricing as the previous generation. High performance, long range, and Wi-Fi 6 — all without breaking the budget. The 802.11ax standard brings crucial improvements for long-distance wireless links — including better spectral efficiency, higher modulation rates (1024-QAM), and lower latency. That means stronger performance even in noisy environments and faster, more stable connections over a greater distance. Combined with WPA3 encryption and RouterOS v7, the LHG ax series is ready for the challenges of modern outdoor networking. Order yours today — and be ready too! LHG 5 ax is compact, long-range CPE with a 24.5 dBi antenna. Perfect for links up to 20 km in most scenarios. Check related devices below for the XL version if you need a longer distance!
The Ubiquiti UniFi Flex 2.5G PoE is a switch designed to meet the demands of modern networking environments. With a switching capacity of 60 Gbps and non-blocking throughput, this device ensures reliable performance for various applications. It supports up to 4,000 MAC addresses and 256 VLANs, allowing for extensive network segmentation and management. Features like flow control, port mirroring, Jumbo frames support, and advanced traffic management capabilities such as storm control and rate limiting enhance functionality. The switch operates effectively in a range of conditions, with a temperature tolerance from -20°C to 45°C and humidity levels between 10% and 90% (non-condensing). Its multiple mounting options (desktop, DIN rail, or wall-mounted) provide flexibility in deployment, making it suitable for various installations without compromising performance.
The Ubiquiti UniFi Pro XG 8 PoE delivers network performance, suitable for demanding environments. This switch supports a capacity of 1000 IPv4 routes and 128 ARP entries, allowing seamless connectivity for multiple devices. With eight versatile ports, including 10/100/1000/2.5G/5G/10GBase-T and two 10 Gigabit SFP+ connections, the Pro XG facilitates robust networking solutions. Its PoE budget of 155 W ensures that connected devices receive sufficient power, streamlining installation and management. Designed for reliability, the Pro XG operates within a temperature range of -5°C to 45°C and maintains performance in varying humidity levels of 10% to 90%. The switch incorporates features such as flow control, VLAN support, and quality of service (QoS), enhancing network performance and security. With support for Link Aggregation Control Protocol (LACP) and advanced IGMP configuration, managing larger networks becomes straightforward. The fanless design ensures silent operation, suitable for office or home environments.
