Wi-Fi Access Point 6 AX1800 PoE DAP-X2810 Wi-Fi 6 AX1800, up to 1.8Gbps Dual-band, 2x2 MIMO, airtime fairness and bandwidth control functions Free software and Nuclias Connect app Convenient installation with PoE Configurable captive portal D-Link Lifetime Limited warranty Scalable and easy to manage corporate WiFi network 6. The DAP-X2810 with Wi-Fi 6 networking provides businesses of all sizes with fast connections, significantly increased capacity and interference-free coverage, all combined with centralised management via Nuclias Connect. Easy management of your corporate network The DAP-X2810 works with Nuclias Connect, a software-based management platform (with optional hardware controller). This enables you to manage and control your business network from anywhere via the Internet, providing easy access, automation and network scalability. Easy network management with Nuclias Connect Easily automate, monitor, manage and scale your network according to your business needs at no additional cost through the centrally managed Nuclias Connect platform. Next generation - Wi-Fi 6 Greater network performance and lower latency, with almost four times the capacity of previous Wi-Fi standards Secure performance WPA3 encryption provides security with high throughput with dual-band 2x2 MU-MIMO technology, bandwidth control and airtime fairness to intelligently manage users. Flexible deployment with PoE Support for Power over Ethernet (802.3at) simplifies installation with less cable clutter. The design allows easy installation on Ethernet wall sockets. No licence required Work as a standalone access point or as part of a centralised, scalable multi-device deployment according to the needs of the business. More efficient administrative tasks Administrators can work more efficiently and effectively with role-based options for delegated access across the network. Deployment, configuration, upgrading and expansion is possible from multiple locations using an intuitive dashboard. Captive portal Captive Portal, the industry standard for authentication, streamlines access management with the ability to add brand information. Free software and application Quickly configure, manage and monitor access points locally via a free management tool or remotely via the Nucliast Connect app. Next-generation WiFi 6 performance with huge speed improvements Combined Wi-Fi 6 802.11ax connection speeds of up to 1,800 Mbps provide the DAP-X2810 with lightning-fast transfer rates, enabling large amounts of data and efficient video streaming, even in high-density environments Next-generation Wi-Fi 6 connections deliver higher network performance and lower latency, and nearly four times the capacity of previous Wi-Fi standards. Optimised Wi-Fi for convenient connections The DAP-X2810 supports 2x2 MU-MIMO bandwidth control and beamforming functions, which are designed to reduce network congestion. In addition, load-balancing technology and Airtime Fairness manage access point loads to optimise resource utilisation. This ensures that each device connected to the network connects at peak performance without overloading the entire network. Multiple modes of operation The DAP-X2810 can be configured to suit your network needs and optimise network performance. Access point Wireless distribution system (WDS) with access point WDS/bridge (without AP broadcast) Wireless client Easy and hassle-free installation anywhere. The DAP-X2810 can be placed on a desk, ceiling or wall mounted. The PoE function makes installation quicker and easier as there is no need to lay additional power cables. This is ideal for extensive deployments in locations where power sockets are not readily available. Corporate network management with advanced control mechanisms Nuclias Connect enables you to manage and control your network from anywhere. It provides insight into network performance and user activity through traffic analysis and status reports, available in a browser or free app. Detailed data from network traffic analysis, which can be displayed for the entire network down to the single access point level, can be used to create business value. Comprehensive on-site network management Nuclias Connect, compared to traditional hardware-based unified management systems, offers a great deal of flexibility. Easy configuration, remote access and an intuitive dashboard provide administrators with management efficiency and convenience, while functionality and automated network tools such as airtime fairness, throttling location and load balancing improve the user experience. Scale up your WiFi network as your business grows Nuclias Connect enables unlimited scalability, allowing you to adapt the size of your network to suit your business requirements. Expanding or setting up a network in a new location is quick and easy. Management and configuration is done via the cloud, and access points and surveillance cameras are automatically detected and ready for deployment right out of the box. Greater brand awareness with captive portal Guest web visitors are not only able to connect using an email address, Facebook or Google account. Captive portal enables increased brand awareness, the placement of advertisements and promotions, and the collection of user information to gain a better understanding of customer behaviour.
Unleash the Power of Wi-Fi 7 in the Modern Workplace Designed specifically for the modern workplace, the NWA130BE is equipped with a Qualcomm quad-core processor to deliver blazing-fast Wi-Fi 7 speeds of up to 11 Gbps and noticeable performance gains. Coupled with Zyxel Nebulas comprehensive suite of management and security innovations, it delivers robust connectivity and reliability that meets the enterprise-class demands of todays modern workplace. Blazing-fast Tri-Radio WiFi 7 (802.11be) AP The BE11000 Tri-Radio AP (2x2 in 2.4, 5, and 6 GHz) delivers blazing-fast Wi-Fi 7 speeds of up to 11 Gbps and lower latency for real-time response. 2.5G Ports the Right and Cost-Effective Fit The 2 x 2.5G Ethernet ports are the right and cost-effective solution, not only providing users with an easy upgrade to enjoy Wi-Fi 7 performance, but also enabling seamless integration with existing infrastructure without the need for costly re-wiring. Rectangular Design for Optimal SNR 4K QAM (MCS-13) requires high signal-to-noise ratio (SNR). The rectangular design provides excellent antenna isolation, surpassing the effectiveness of circular designs. As designed by RF First. The advanced RF filter design eliminates interference between 5 GHz and 6 GHz bands, while the built-in 4G/5G interference filter enables seamless interoperability with 4G/5G cellular networks and minimizes interference, all to ensure a smooth, interruption-free Wi-Fi experience. Flexible management to suit diverse requirements NebulaFlex allows users to switch between standalone and intuitive Nebula cloud-managed modes as needed.
A compact outdoor Wi-Fi 6 CPE with a powerful 16 dBi antenna, AP mode, and multiple mounting options — perfect for masts, poles, or rooftop deployments. Meet the SXTsq 5 ax — our first Wi-Fi 6 outdoor CPE, combining the best wireless technology with our trusted, compact SXTsq form factor. Despite the upgrade to Wi-Fi 6 and a modern ARM-based dual- core CPU, this unit keeps the same price point as our previous Wi-Fi 5 model — making it one of the best-value weatherproof CPEs on the market. The enclosure can withstand all sorts of unpredictable weather hazards, and it features slots for directly attaching a hose clamp in three different mounting positions, including support for horizontal railings — ideal for masts and poles in rooftop or tower deployments. Field-tested up to 3 km in high-interference, urban scenarios. Designed with the same trusted long-range architecture as previous SXT models — capable of 10+ km links in line-of-sight deployments. With RouterOS license level 4, the SXTsq 5 ax isn’t just a client — it can also be configured as a powerful access point, giving you more flexibility in planning your wireless infrastructure. And thanks to its compact square shape, it fits neatly into even the most space- sensitive deployments.
AX1800 High Gain Wireless USB Adapter Lightning-Fast WiFi 6 – Stream flawless video with 1800 Mbps wireless speeds (1201 Mbps on 5 GHz + 574 Mbps on 2.4 GHz)† Flexible Dual Band – Ensure your PC has the best connection with 5 GHz and 2.4 GHz bands Dual High-Gain Antennas – Connect from farther away with high gain antennas and Beamforming technology Ultra-Low Latency – The combo of OFDMA and MU-MIMO ensures the most efficient Wi-Fi connection for your PC, reducing latency for faster speeds‡ SuperSpeed USB 3.0 – Up to 10× faster transfer speeds than USB 2.0 Refined Security – Protect your personal data with the latest WPA3 encryption△
QG-U1080, 8-Port 2.5G and 2-Port 10G SFP+ Unmanaged Switch, Support 4 Intelligent Modes, Home Network Hub, Office Ethernet Splitter, Plug and Play, Easy Setup, Desktop, Silent Operation Upgraded 2.5G ports and 10G SFP+ - Seamlessly upgrade to 2.5G by using standard CAT5e Ethernet cables to enjoy faster network performance. Support four intelligent functions - priority, EEE, port isolation, and static trunk. One switch is all you need to safeguard and optimize your home or business network. Plug and Play, Effortless Setup - Setting up your network has never been easier! Simply connect your devices, and youre good to go-no complicated configurations required. Versatile Networking Expansion - You can connect 2.5G/10G-compatible devices, including NAS, AP, Gaming PCs, and 4K streaming devices to achieve a more comprehensive network setup. Upgrade to the 2.5G Ultra-Fast NetworkExperience lightning speed and seamless connectivity like never before. Genuine WiFi Integration for Real PerformanceThe QG-U1080 unlocks the full potential of WiFi 6/7 APs. Unlike traditional Gigabit Ethernet switches, it removes performance limitations, delivering a superior and uninterrupted experience. 10G SFP+ unbeatable powerDesigned for high-performance networking, 10G SFP+ ports deliver ultra-fast speed, ensuring your infrastructure can handle the most demanding workloads. The QG-U1080 is ready for modern and high-end networking applications. Plug and Play, Hassle-Free UpgradeTwo Steps, No Setup Required, Ready to Go. Simply continue using your existing CAT5e cables, and experience the seamless convenience of an effortless network upgrade that enhances your connectivity and performance. One Click, Instant TransformationCheck out how these four intelligent features can enhance your network configuration. PriorityPriority allows you to optimize your network's performance by prioritizing traffic based on importance during peak usage times. Energy Efficient Ethernet (EEE)Energy Efficient Ethernet (EEE) is the smart way to reduce your network's energy footprint. With EEE, your Ethernet switches automatically adjust power consumption based on real-time traffic, ensuring energy savings when your network is less active. Port IsolationPort Isolation provides a secure and efficient way to manage your network. By isolating each port, it ensures that traffic on one port does not affect other devices, enhancing both security and performance. Static TrunkStatic Trunk enables you to combine multiple network links into a single, high-performance connection. This increases bandwidth, improves reliability, and enhances fault tolerance, making your network faster and more resilient. Ready to Upgrade? Experience the Speed of 2.5G!With the QG-U1080, you can connect various devices to expand your network setup, including Wi-Fi 6 access points (AP), NAS, 4K streaming devices, and gaming consoles requiring high-speed internet.
SWITCH LANBERG ILGE-8P-2S-120 POE 4XBT 4XAT 2XSFP DIN UNMANAGMENT GIGABIT ETHERNETLightweight unmanaged industrial switch Lanberg ILGE-8P-2S-120 Industrial switches are an essential active device in any network structure - from automation and SCADA systems, through cable TV networks, to distributed IoT installations and surveillance. Lanbergs lightweight industrial switch series was designed for demanding working environments: a metal enclosure, passive cooling, and operating parameters that support stable operation across a wide ambient temperature range. The key advantages of this line include high PoE power (PoE+ / PoE++), redundant power input (you can connect 2 power sources), DIN-rail mounting, VLAN and EXTEND functions, automatic MDI/MDI-X, flow control, an intelligent PoE port cut-off function, and MAC auto-learning.In practice, this is a network switch built for distributed infrastructure: industry, street lighting infrastructure, outdoor CCTV monitoring, alarm systems, and both indoor and outdoor deployments where Ethernet data transmission and PoE power for end devices (cameras, recorders, access points, controllers, sensors) matter - often with higher power requirements.NOTE: The device power supply is included in the product set.Industrial switch ILGE-8P-2S-120 with a rich selection of ports 8 x Gigabit Ethernet RJ45 PoE ports (1 Gb/s) for end devices, including 4 x PoE++ BT ports (max 90 W) plus remaining PoE ports in 802.3af/802.3at standards. 2 x SFP uplinks (1 Gb/s) - for building redundant or parallel fiber connections (e.g., to two cabinets, a ring topology, or two independent cable routes). Lanberg Gigabit Ethernet switches with PoE++ technologyPoE, PoE+ and PoE++ technology makes it possible to deliver both data and power to devices using a single Ethernet cable, without additional electrical infrastructure at the camera or access point. IEEE 802.3af provides up to 15.4 W per port, IEEE 802.3at (PoE+) increases this to 30 W, and IEEE 802.3bt (PoE++ / 4PPoE Type 4) can deliver up to 90 W per port enabling power for 4K cameras with heaters, IR illuminators, or higher-draw automation equipment.Depending on the model variant, the series offers a total PoE power budget of 90 W or 120 W, which simplifies planning of overall PoE power delivery while keeping safe reserves for stable 24/7 operation.VLAN and EXTEND functionsVLAN is used as a practical way to separate traffic/ports (e.g., isolating cameras from each other while maintaining communication with an NVR/router via the uplink). It helps reduce broadcast "spill-over" and improves security in distributed installations.EXTEND mode was introduced for deployments where you need to ensure operation over a longer run - at the cost of speed. In Extend mode you can reach up to 250 m on a single cable run, typically by limiting the port speed to around 10 Mb/s - ideal for surveillance where distance is more important than maximum throughput.An unmanaged switch that knows how to disconnect devicesIf a temporary power spike occurs (e.g., when IR illuminators/heaters start up) and the available PoE power budget is exceeded, the switch will disconnect ports in a controlled way: it cuts off the highest-numbered PoE port first, then the next ones until the system returns to a safe power limit. This lets you plan priorities in advance - the most critical devices stay online first.Intelligent switches with SFP module supportLanbergs lightweight industrial switches support different fiber types thanks to SFP slots. Optical transmission parameters (range, fiber type, wavelength) depend on the selected module, giving you flexibility when choosing an uplink to a cabinet, pole, or another node. The device also supports automatic MDI/MDI-X, so crossover cables are not required, and the Ethernet port automatically negotiates speed and transmission mode.Unmanaged PoE switch with redundant power inputRedundant power input means a dual power feed to the switch (two independent power paths). If one source fails, the device automatically switches to the other - without user intervention and without interrupting operation of critical PoE ports. Its a simple but highly effective way to increase network stability in industrial and outdoor environments.Easy installation in 19" racks and on a DIN railThis is a Plug & Play unmanaged switch - connect power and cables, and the device configures the link parameters automatically. MDI/MDI-X auto-detection recognizes the cable type, eliminating the need for crossover wiring. In IP surveillance systems, reliable packet forwarding is crucial - store-and-forward switching with CRC checking helps reduce propagation of corrupted frames.A major advantage is DIN-rail mounting, making it easy to install the device in automation cabinets, and when needed - also in rack environments (e.g., on a shelf or using integration accessories such as rack mounting ears). This provides flexibility for installation both inside and outside RACK cabinets.Metal enclosure for durability and wide operating temperature rangeThe sturdy metal housing enhances mechanical durability, while passive cooling ensures reliability in continuous operation. The recommended operating ambient temperature ranges from -25 to 65 °C, with humidity between 10% and 90%. Although the enclosure itself is not water- or dust-tight, when installed in a suitable box or cabinet, the switch will perform well in demanding environments: industrial halls, manufacturing facilities, monitoring centers, and street cabinets. An additional safeguard is 6 kV surge protection, which is essential for outdoor installations.
5 Port PoE-Switch 802.3af/at PoE/PoE+ and 12-57 V passives PoE. Cloud Router Switch with 1 Gigabit Ethernet Port and 4 SFP+ Ports. Dualboot - RouterOS or SwOS.
netFiber 9 is a powerful outdoor switch with SFP SFP+ and Gigabit Ethernet. It features a powerful ARM v7 CPU 256 MB of RAM 4x 10G SFP+ ports and an advanced Marvell switch-chip that can handle even the heaviest loads. The Gigabit Ethernet port is not just for management purposes. It has a direct connection to the switch chip – so you can enjoy full gigabit speed. This port also supports PoE-in so you don’t have to rely on the DC jack for powering in tight hard-to-reach spots. There is a console port followed by five regular SFP ports and four SFP+ ports for that sweet 10 Gbps networking. This means there might be quite a lot of wires for you to organize at some point. That’s why Mikrotik designed the case to have some handy little additional features on the bottom of the case to help you keep everything neat and tidy.The sturdy case provides decent protection in dusty environments with occasional splashes of water. Perfect for outdoors with some light coverage – like a roof overhang or a simple cabinet.There is a massive heatsink on the back that serves two purposes. Not only it provides outstanding heat dissipation it also moves the center of mass towards the side with all the mounting options – keeping the board firm and strong upon installation. The package includes metal hose clamps and screws so you can attach the netFiber to a pole wall or mast right away.netFiber 9 is an amazing tool for anyone working with connections over 100 meters while keeping data loss and ping low. Optic fiber can be a great alternative to copper if you are worried about electromagnetic interference or maybe even tampering and eavesdropping. With 10 ports a powerful CPU and a rugged case netFiber 9 is a real bargain that will make your network management so much easier!
Mercusys AC1300 Whole Home Mesh Wi-Fi System Halo H30G (2-Pack) 802.11ac, 400+867 Mbit/s, Ethernet LAN (RJ-45) ports 2, Mesh Support Yes, MU-MiMO Yes, White
Connection: 1 x LAN (RJ45) 10/100/1000/2500 Mbps networks with automatic recognition Conforms with: IEEE802.3, IEEE802.3u & IEEE802.3ab specification Chipset: Realtek RTL8125B - 2500Base-T Ethernet Controller Supports: auto MDI/MDIX crossover PCI Express: Specification 2.1 Wake-on-LAN (WOL): Yes IEEE802.1q VLAN tagging: Yes LED operating display: Active / data traffic / 2.5G data traffic Supported operating systems: Windows 7/8/10 (32/64Bit), Windows Server 2008 R2/2012 R2/2016, Linux 4 and higher Operating temperature: 5 °C to +50 °C Dimensions (WxDxH): 12 x 9.8 x 2.2 cm Weight: 35.2 g
Mercusys AC1300 Whole Home Mesh Wi-Fi System Halo H30G (3-Pack) 802.11ac, 400+867 Mbit/s, Ethernet LAN (RJ-45) ports 2, Mesh Support Yes, MU-MiMO Yes, White
A compact access point improving upon the U6 Lite by bringing higher performance and dual-band WiFi6 support. Ideal for small and medium-sized businesses.
Price/Performance Breakthrough The EdgeRouter™ 4 offers next-generation price/performance value: up to 3.4 million packets per second processing with a line rate of up to 4 Gbps. Versatile Design The EdgeRouter 4 can be rack-mounted with the use of the EdgeRouter Rack Mount Kit model ER-RMKIT (sold separately). Centralized Management The EdgeRouter 4 is supported and managed by UNMS™ (Ubiquiti® Network Management System) a comprehensive controller with an intuitive UI. A single control plane manages registered EdgeMAX® devices across multiple sites.
TAP100 on Teltonika Networks'i esimene juurdepääsupunkt, mis sobib ideaalselt Wi-Fi leviala tugevdamiseks väikestes ettevõtetes ja äriruumides. See PoE-in pääsupunkt saab oma RJ45 pordi kaudu toite aktiivsetest PoE-seadmetest ning on projekteeritud lihtsust ja paigaldusmugavust silmas pidades. POE-IN Saab RJ45 pordi kaudu toite PoE-seadmetest SLEEK DISAIN UV-stabiliseeritud plastikust korpus, mis sulandub keskkonda LIHTNE PAIGALDAMINE Integreeritud kinnitusklamber lihtsaks paigaldamiseks laes RMS HALDAMINE Tasuta juurdepääs RMS Managementile 24 kuu jooksul
TSW030 on kuluefektiivne haldamata Ethernet-kommutaator, millel on kaheksa 10/100 RJ45 porti ja integreeritud DIN-riba paigaldus. See kompaktne ja vastupidav 8-portiline kommutaator sisaldab 2-poolset toitesisendit ja madalat energiatarbimist, mis on kuni 0,5 W tühikäigul ja maksimaalselt kuni 1,5 W. Tänu sellele sobib see plug-and-play lüliti ideaalselt tööstuslikesse rakendustesse, kus on vaja ühendada kuni kaheksa seadet. 2-POOLNE TOITESISENDLihtne ja tööstusrakendustesse sobivMADAL ENERGIATARVETühikäigul kuni 0,5 W, maksimaalselt kuni 1,5 WINTEGREERITUD DIN-RÖÖPMELLihtne paigaldus plug-and-play kasutuselevõtuks8 X RJ45 PORTSKaheksa 10/100 Mbit/s Ethernet-porti
RUTM11 on Teltonika tööstuslik LTE-ruuter, mis on mõeldud rakenduste jaoks, mis nõuavad suurt andmeedastust ja töökindlat võrguühendust, mis ei talu suuri viivitusi ja katkestusi. RUTM11 on varustatud nelja Gigabit RJ45 pordiga, kahesagedusliku Wi-Fi ja kahe SIM-kaardi võimekusega, mis võimaldab mitut varusstsenaariumi. Sellel ruuteril on LTE Cat 6, mis võimaldab saavutada kuni 300 Mbit/s mobiilside kiirust, mida saab suurendada operaatorite koondamise abil. ÜHENDUS Dual SIM, 4G LTE (Cat 6) kiirusega kuni 300Mbps INTERFACES 4 x Gigabit RJ45 porti, USB ja kuni 128 tag/port-põhist VLANi. GNSS Asukohateenused ja ajasünkroniseerimine andmete täpseks lugemiseks WI-FI 5 Kahe sagedusalaga Wi-Fi koos võrgusilma ja kiire rändluse funktsioonidega STANDARDPAKETT*Ruuter RUTM1118 W TOITEALLIKAS2x mobiilsed antennid (pöörlevad, SMA isendiga)2x Wi-Fi antennid (pööratavad, RP-SMA isased)1x GNSS antenn (kleepuv, SMA isane, 3 m pikkune kaabel)Ethernet-kaabel (1,5 m)SIM-adapteri komplektQSG (kiirkäsiraamat)Pakendikarp
The Ubiquiti UniFi Switch Pro Max 16 PoE stands out as a formidable solution for businesses seeking to enhance their network infrastructure. This switch not only offers robust performance with its impressive 42 Gbps non-blocking switching throughput, 84 Gbps switching capacity, and 62.496 Mpps forwarding rate, but it also provides advanced connectivity options through its array of ports, including 12 10/100/1000 Base-T, 4 2.5GBase-T, and 2 10GBase-T SFP+ ports.Designed to cater to the needs of modern businesses, it features a comprehensive PoE support with a 180 W budget, accommodating a variety of devices from access points to surveillance cameras, thereby streamlining installation processes and reducing cable clutter. Moreover, its Layer 3 advanced switching capabilities, coupled with extensive security and network management features like VLAN support, DHCP snooping, and IGMP snooping, ensure a secure, efficient, and scalable network environment.Built to last, the switch's steel housing and ability to operate in temperatures ranging from -5°C to 40°C make it a reliable choice for any setting. Whether for a small office or a large enterprise, the Ubiquiti UniFi Switch Pro Max 16 PoE is engineered to meet the demands of any network infrastructure, offering both performance and durability.
LtAP LTE6 kit with dual core 880MHz CPU, 128MB RAM, 1 x Gigabit LAN, built-in High Power 2.4Ghz 802.11b/g/n Dual Chain wireless with integrated antenna, LTE CAT6 FG621-EA modem for International bands 1/3/5/7/8/20/28/38/40/41, internal LTE antenna, GPS, miniPCI-e slot, three miniSIM slots, RouterOS L4, outdoor enclosure, PSU, card, International version. This LtAP features a brand new Category 6 LTE modem – the same modem you’ve seen in our bestselling Chateau ax series. It supports a variety of popular LTE frequencies, like the B28 band. You can reach consistent speeds of up to 300 Mbps with carrier aggregation, as CAT6 allows devices to use two bands simultaneously. That is a huge advantage in areas with many LTE users. LtAP LTE6 provides better responsiveness in a crowded environment and higher efficiency for weaker signal situations in the countryside. Depending on the service provider, we have seen Internet speed doubling in rural areas after switching to carrier aggregation
The ZyXEL GS1900 series of 24-port GbE Smart Managed Switch with Gigabit speed and essential managing functions bring your business network more fexibility and connectivity. Providing GbE switches with powersaving functions and full IPv6 support ensure your network to be ready for future expansions. In addition, the PoE models GS1900-24HP Gigabit switch complies with the IEEE 802.3at Power over Ethernet (PoE) Plus standard. The complete GS1900 series has been designed with useful features and advanced performances that empower your networks with speed and security.The complete ZyXEL GS1900 series has an essential portfolio of 24-port compact desktop and rackmount size with GbE connectivity. Support multiple deployment methods to fulfill the needs for small offices and meeting room environments such as wall-, under table- or desktop-mounting and rackmount options. It's now quick and effortless to enjoy the high-speed business network applications without a hitch. Additionally, the GS1900-24HP is equipped with 2 extra SFP slots to provide 100M and GbE speeds for long-distance deployments.
