Toote nimetus: Alantec WTM17 pinnapealne RJ45 pistik must Toote kirjeldus: Alantec WTM17 pinnapealne RJ45 pistik on oma elegantse musta värviga oluline komponent tõhusate ja usaldusväärsete võrgulahenduste loomiseks. See nii elamu- kui ka ärikeskkondadesse mõeldud pistik pakub mitmekülgsust ja lihtsat paigaldust, mis on ideaalne struktureeritud kaablisüsteemide hooldamiseks. Selle tugev konstruktsioon tagab pikaajalise toimimise ka keerulistes tingimustes. Alantec WTM17 ühildub paljude kaablitüüpidega ja toetab kiiret andmeedastust, mistõttu sobib see ideaalselt tänapäeva interneti- ja võrgurakenduste jaoks. Selle RJ45-pistiku kompaktne, madala profiiliga disain võimaldab seda diskreetselt paigutada, nii et see sobib sujuvalt igasse ruumi, ilma et see kahjustaks funktsionaalsust. Pinnale paigaldatavus lihtsustab paigaldusprotsessi, kuna seda saab kiiresti ja kindlalt seinale või muudele pindadele kinnitada, minimeerides vajadust lisaseadmete järele. Must viimistlus mitte ainult ei lisa keerukust, vaid vähendab ka nähtavust tumedamatel pindadel. Olenemata sellest, kas ehitate uut võrku või uuendate olemasolevat, Alanteci WTM17 pinnale paigaldatav RJ45-pistik on loodud nii jõudluse kui ka esteetilisuse tagamiseks, tagades puhta, korraliku ja tõhusa võrgukeskkonna.
Välistingimustes kasutatav Gigabit LTE ruuter PoE toega ja täiustatud ühenduvusega.See kõrge jõudlusega välistingimustes kasutatav LTE ruuter on loodud vastupidavaks ja usaldusväärseks ka kõige karmimates tingimustes. Kaksikvahemiku WiFi, LTE toe ja PoE funktsioonidega on see ideaalne lahendus nii tööstuslikeks rakendusteks kui ka kaugpaigaldusteks, kus on oluline stabiilne ja kiire ühendus.Mehaaniline disain ja vastupidavus:Mõõtmed:Ilma välikatteta: 114.5 x 93.6 x 32 mm (4.5 x 3.7 x 1.3").Välikattega: 217 x 94 x 32 mm (8.5 x 3.7 x 1.3").Kaal:Seade: 360 g (12.7 oz).Välikattega: 395 g (13.9 oz).Kinnituskomplekt (DIN siin/seinakinnitus): 25 g (0.9 oz).Korpuse materjal: Vastupidav polükarbonaadist ja alumiiniumist ehitus, mis tagab pikaajalise kaitse.Kinnituse materjal: Seina- ja postikinnitus valmistatud tugevast polükarbonaadist.Postikinnituse läbimõõt: Sobib torudele, mille välisläbimõõt on 1–2".Ilmastikukindlus: Välikattega seadmel on IP66 reiting, mis kaitseb tolmu ja tugeva veesurve eest.Tuulekoormuse vastupidavus: Talub kuni 38.8 N juures kiirust 200 km/h (8.7 lbf kiirusel 125 mph), tagades stabiilsuse ka tugeva tuule korral.Täiustatud riistvara ja liidesed:Haldusliides: Ethernet ja WiFi paindlike haldusvõimaluste jaoks.Võrguliidesed:(2) Gigabit Ethernet (GbE) RJ45 porti kiire juhtmega ühenduse jaoks.LTE kategooria 4 raadio mobiilse internetiühenduse jaoks.WiFi standard: Toetab WiFi 4 (802.11 b/g/n) traadita võrguühendust.Power Over Ethernet (PoE):(1) PoE sisend seadme toiteks.(1) PoE väljund (maks. 10W) teiste seadmete toiteks (vajalik PoE+ lüliti).Toiteallikad:UniFi PoE lüliti (48–54V DC).USB Type-C (5V DC).4-pin ATX DC toitepistik (9–30V DC).Maksimaalne energiatarve: Energiatõhus, maksimaalse võimsustarbega 12,5 W.Mobiilne ühenduvus:SIM-pesa: nano-SIM (4FF) LTE/3G ühenduvuse jaoks.Toetatud LTE sagedused: B1, B3, B7, B8, B20, B28.Toetatud 3G sagedused: B1, B8.LTE läbilaskevõime: Allalaadimine kuni 150 Mbps / üleslaadimine kuni 50 Mbps (sõltub võrgu katvusest ja seadme asukohast).Traadita ühendus ja antennid:WiFi standardid: 802.11 b/g/n, toetab 2,4 GHz sagedusi, maksimaalse andmeedastuskiirusega kuni 300 Mbps (WiFi 4).WiFi edastusvõimsus: Kuni 22 dBm, tagades tugeva traadita signaali.WiFi MIMO: 2x2 MIMO tehnoloogia paremaks andmeedastuseks ja leviala ulatuseks.Välised antennid:(2) Mobiil/LTE antenni SMA isaste ühendustega parima LTE jõudluse jaoks.(1) GPS antenn SMA isase ühendusega täpseks asukoha määramiseks.(2) WiFi antenni RP-SMA isaste ühendustega traadita ühenduse parandamiseks.Paigaldus ja ilmastikukindlus:Paigaldusvalikud: Komplektis on DIN siin, seinakinnitus ja postikinnitus paindlikuks paigaldamiseks.Ilmastikukindlus: Välikattega seadme IP66 kaitseklass tagab töökindluse ka ekstreemsetes ilmastikutingimustes.Töövõimekus:Töötemperatuur: Talub äärmuslikke temperatuure -40°C kuni 70°C (-40°F kuni 158°F).Niiskustaluvus: 5% kuni 95% mitte-kondenseeruv, sobib kasutamiseks erinevates keskkondades.Sertifikaadid ja vastavus:Sertifikaadid: CE, GCF, Wi-Fi Alliance® sertifikaadid tagavad ülemaailmse vastavuse.LED indikaatorid ja taaskäivitamine:LED staatuse indikaatorid: Sinised/valged LED-id annavad selge ülevaate seadme olekust.Tehase lähtestamise nupp: Kiire ja lihtne seadme taaskäivitamine.Toetatud WiFi andmeedastuskiirused:802.11b: 1, 2, 5.5, 11 Mbps.802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps.802.11n (WiFi 4): 6.5 Mbps kuni 300 Mbps koos 20/40 MHz kanalite toega.
Paindlik ja usaldusväärne võrgu kauguse laiendamise lahendusPLANET XT-705A meediamuundur on varustatud ühe 10G/5G/2.5G/1G/100BASE-T automaatse läbirääkimistega pordiga ja ühe 10GBASE-X SFP+ pesaga. See toetab 10Gigabit Ethernet meedia muundamist vasest 10GBASE-T-ist mitmemoodusesse või ühemoodusesse kiudoptikasse, kasutades SFP+ pessa paigaldatud 10GBASE-SR või 10GBASE-LR SFP+ transceiverit, et pikendada vahemaid serverite, kommutaatorite ja patch-paneelidega. Kasutuskaugust saab pikendada 300 meetrist (mitmemoodiline) kuni 60 kilomeetrini (ühemoodiline). need on mõeldud kasutamiseks võrgukeskkondades, kus on vaja 10Gigabit Ethernet'i pakutavat ülikõrget ribalaiust, näiteks andmekeskuste pilvandmetöötlus, ettevõtete magistraalvõrgud, ülikoolilinnakute võrgud ja operaatorite infrastruktuur.Suure jõudlusega 10Gbps Etherneti läbilaskevõimeXT-705A pakub traadikiirusega pakettide edastamise jõudlust ilma paketikadude ohuta. Seadme kõrge andmeside läbilaskevõime muudab selle ideaalseks enamikus Gigabit-keskkondades. Tänu 20Gbps sisemisele kangale, 16K jumbo frame'i funktsioonile ja automaatse läbirääkimise toetusele 10 Gigabiti pordis saab XT-705A hakkama äärmiselt suurte andmemahtude edastamisega turvalises topoloogias, mis ühendab andmekeskuste pilvearvutusi, ettevõtte magistraalvõrke, ülikoolilinnakuvõrke ja operaatorite infrastruktuuri.Tugev kaitseXT-705A pakub Ethernet ESD-kaitseks kontaktipäästet ±6KV DC ja õhupäästet ±8KV DC. See toetab ka ±4KV ülepingekindlust, et parandada toote stabiilsust ja kaitsta kasutajate võrke laastavate ESD-rünnakute eest, tagades, et töövoog ei kõigu.Madal energiatarveXT-705A, mis kasutab täiustatud kiibitehnoloogiat, on energiasäästlik, näiteks madala energiatarbimisega, mis on täisvõimsusel vaid 3,75 vatti.Lihtne korpuse paigaldamineXT-705A meediamuundurit saab kasutada eraldiseisva seadmena või PLANETi meediamuundurite šabloonina (MC-700 ja MC-1500 šassiide seeria). Meediaseadme šassii võib aidata XT-705A meediamuundurit alalisvooluga varustada, et säilitada fiiberoptilist võrku ühes keskses kohas. See võib olla DIN-riba või seinale paigaldatav, et kasutada tõhusalt kapi ruumi.
The LANCOM XS-5116QF is designed for network efficiency with its features. It supports 4,000 active VLANs and 1,024 tagged VLANs, optimizing data flow within operations. The device offers versatile interfaces including 12 1 Gigabit / 10 Gigabit SFP+ ports and additional 40 Gigabit QSFP+ uplink/stacking options, ensuring connectivity across various network demands. Its management protocols, such as SNMP and RMON, provide effective remote management capabilities for easy monitoring and control. Built with front to back airflow, this switch ensures cooling even in high-temperature environments, suitable for a wide range of installations. Operating within a temperature range from 0°C to 40°C and humidity levels of 10-90% non-condensing, the LANCOM XS-5116QF is engineered for durability. The inclusion of a rack mounting kit and its hot-swappable fans allow for easy integration into existing setups without downtime. Networking features like IGMP snooping and multicast storm control ensure that data is managed efficiently, providing a stable network experience. This switch prioritizes performance, scalability, and security, making it a solid choice for networking needs.
AXE5400 Tri-Band Mesh Wi-Fi 6E System - Boosted Seamless Coverage — Mesh WiFi coverage up to 7,200 ft2 (3-pack), 5,500 ft2 (2-pack), and 2,900 ft2 (1-pack).† - True Tri-Band Speed – All three WiFi bands work together to unleash your network’s total speeds up to 5,400 Mbps for 200 devices† - AI-Driven Mesh – Unites your home under one name and password while delivering the best connections as you move room to room‡ - TP-Link HomeShield – Provides comprehensive network protection, robust parental controls, and real-time IoT security* - Universal Compatibility – Backward compatible with all WiFi generations and works with any internet service provider (ISP) and modem? - Setup Made Easier Than Ever – The Deco app walks you through setup step-by-step.
The Killer™ Wi-Fi 7 BE1750x offers outstanding wireless connectivity for demanding users. With the latest Wi-Fi 7 technology, this adapter delivers ultra-fast data transfer rates and improved performance for a smooth online experience. Whether for gaming, streaming, or productivity applications, the Killer™ Wi-Fi 7 BE1750x lets you optimize your connection and minimize latency. Thanks to its advanced technology, this adapter is ideal for gaming enthusiasts and demanding users who value a reliable and high-performance wireless network connection.
CAT6 UTP Flat Patch CableVention CAT6 flat patch cords are a great solution for how to hide ethernet cables in tight spaces where regular CAT6 patch cord is too bulky. Flat fully molded cord gives a neat appearance to desktops & wall outlets.Vention CAT6 Flat Patch Cord is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates. These cables deliver improved performance over standard CAT5E cables.CAT6 is completely backward-compatible with current CAT5 CAT5E equipment. Vention CAT6 Flat Patch Cords are composed of 4 pairs 32AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard.Used to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Virtually eliminates alien crosstalk and interference.Performance rated beyond 250 MHz.
Processor: Qualcomm CPU Interface: 2 Gigabit Ethernet Ports (WAN/LAN auto-sensing) per Deco unit Button: 1 Reset button on the underside External Power Supply: Power Cord Dimensions: 7.5 in. x 3.6 in. x 3.6 in. (190 mm x 90.7 mm x 90.7 mm) Antenna Type: 2 internal dual-band antennas per Deco unit Wireless Standards: IEEE 802.11 ac/n/a 5 GHz, IEEE 802.11 b/g/n 2.4 GHz Frequency: 2.4 GHz and 5 GHz Signal Rate: 300 Mbps on 2.4 GHz, 867 Mbps on 5 GHz Wireless Security: WPA-PSK/WPA2-PSK
RG-RAP2260(G) Reyee Wi-Fi 6 AX1800 Ceiling Access Point Build ultra-fast network with Wi-Fi 6 technology. Client connections over 500, better multi-user experience. Provide higher practical performance for users as well. Easily install extra AP with Reyee Mesh technology. Set up Wi-Fi 6 network in 3 minutes with Ruijie Cloud APP.
This DP 8K certified USB-C™ to DisplayPort cable by Delock enables the connection between different devices with USB Type-C™ and DisplayPort connectors. Versatile applications The bidirectional cable works in both signal directions and therefore offers a variety of possible applications. It can be used, for example, to connect a monitor or TV with DisplayPort socket to a laptop or smartphone with USB Type-C™ port. Alternatively it is possible to connect a USB Type-C™ monitor to a device with DisplayPort output. 8K Ultra HD resolution and HDR support By supporting a maximum bandwidth of 32.4 Gbps, content up to 8K Ultra HD (7680 x 4320 @ 60 Hz) resolution can be displayed. Due to the HDR support colours are realistically displayed with impressive depth, brightness and contrast are optimally reproduced. Specification • Connectors: 1 x USB Type-C™ male > 1 x DisplayPort male • Chipset: Chrontel CH7213 • DisplayPort 1.4 specification • Downwards compatible to DisplayPort 1.3, 1.2 and 1.1 • DisplayPort® DP 8K certified cable • Cable gauge: 32 AWG • Cable diameter: ca. 4.8 mm • Copper conductor • Triple shielded cable • Contacts gold-plated • Transmission of audio and video signals • Data transfer rate up to 32.4 Gbps • Resolution up to: Display with DSC support: 7680 x 4320 @ 60 Hz 5120 x 2880 @ 120 Hz 3840 x 2160 @ 240 Hz Display without DSC support: 7680 x 4320 @ 30 Hz 5120 x 2880 @ 60 Hz 3840 x 2160 @ 120 Hz (depending on the system and the connected hardware) • Supports Display Stream Compression 1.2 (DSC) • Supports HDR • Supports HDCP 1.4 and 2.2 • Supports HBR3 (8.1 Gbps) data rate • Up to 32 audio channels for speakers • Up to 1536 kHz audio sampling rate • Supports colour sampling in 4:4:4, 4:2:2 and 4:2:0 format • Plug & Play • Colour: black • Length incl. connectors: ca. 1.5 m System requirements • Android 8.0 or above • Chrome OS 71.0 or above • iOS 12.1.4 or above • Mac OS 10.14.2 or above • Windows 7/7-64/8.1/8.1-64/10/10-64 • PC or laptop with a free USB Type-C™ port and DisplayPort alternate mode or • PC or laptop with a free Thunderbolt™ 3 port • A free DisplayPort interface Package content • USB-C™ to DisplayPort cable
The ND Filters Set meets photographers’ needs when shooting long-exposure shots or in strong lighting conditions (e.g., long-exposure timelapse). The filters provide experienced users with precise control over shutter speed, allowing them to produce smooth footage in bright environments with lower shutter speeds. Flexible use of this set can ensure clean footage, even when the shutter opens to 180° with a low ISO.The DJI Avata 2 ND Filter Set allows you to gain more freedom in controlling the aperture and shutter speed, capturing stunning shots like motion blur. ND8 / ND16 / ND32 filter kit Compatible with DJI Avata 2 Weight: 0.7 g (each)
The DIGITUS DN-93905-OD network coupler is designed for durability and efficiency in demanding outdoor conditions. With its toolless installation and compatibility with PoE and PoE+, this coupler ensures a seamless connection while supporting high-speed data transmission. The plastic housing is corrosion-resistant and temperature-resistant, functioning effectively in environments ranging from -40°C to 85°C. Equipped with waterproof, dustproof, and UV-resistant features, it adheres to IP68 standards, making it suitable for outdoor use. Enjoy peace of mind knowing that this network coupler is built to withstand the elements while providing reliable network connectivity.
Made for the Ultrabook The Edimax EU-4208 USB 2.0 Fast Ethernet Adapter is specifically designed to give Fast Ethernet connectivity to your ultrabook, or any computer without an Ethernet port. Simply plug this Fast Ethernet adapter into a USB 2.0 port on your ultrabook, and you can instantly gain access to a stable 10/100Mbps Ethernet connection. The EU-4208 is also a quick and convenient way to add Ethernet connectivity to a desktop computer without the hassle of opening up the computer case. It is backward compatible with the USB 1.1 standard, and can function seamlessly with Microsoft Windows 2000/XP/Vista/7 and Mac OS 10.x.USB 2.0 for Full 10/100Mbps Ethernet PerformanceCompared to USB 1.1 adapters, which only offer 12Mbps transmission speed via USB, the EU-4208 is designed with the USB 2.0 standard and able to transfer data at 480Mbps, ensuring full 10/100Mbps Ethernet performance without any compromise.Compact Design & Power over USBThe Edimax EU-4208 comes in a compact design, making it easy to use in a crowded workspace. With power over USB support, this Ethernet adapter can work without an additional power adapter.Low Power ConsumptionThe Edimax EU-4208 is designed to use power efficiently and prevent unnecessary waste of power. It can dynamically lower its power supply for low power consumption in idle mode and low traffic conditions.
The Lite AP GPS features an integrated high-performance 90 degree sector antenna and GPS Sync for scale-able, cost-effective airMAX AC networks.Introducing the Ubiquiti LiteAP AC airMAX (LAP-GPS), the latest high-performance access point from Ubiquiti Networks. Featuring an ultra-lightweight form factor, the LAP-GPS was designed to be an affordable cost/performance solution for long-distance, wireless broadband bridging. Each of these access points operates in the worldwide, licence-free 5 GHz frequency range with high-performance speeds. The LAP-GPS combines proprietary hardware and software technologies to deliver its breakthrough combination of throughput and range, with cost-effective value.Key FeaturesPart of the Ubiquiti LiteAP AC rangeIncludes Pole Mounting KitRevolutionary Operating SystemAccess Point PtMP airMAX Mixed ModeairMAX AC Protocol SupportLong-Range Point-to-Point (PtP) Link ModeSelectable Channel WidthPtP: 10/20/30/40/50/60/80 MHzPtMP: 10/20/30/40 MHzAutomatic Channel SelectionTransmit Power Control: Automatic/ManualAutomatic Distance Selection (ACK Timing)Strongest WPA2 SecurityairMagic Channel Selection ToolDynamic Configuration ChangesInstant Input ValidationHardware OverviewThe LAP-GPS delivers up to 450+ Mbps real TCP/IP throughput and features an efficient form factor.GPS Sync SupportThe LAP-GPS supports GPS Sync for faster, more scalable, carrier-class networks. Precise GPS frame synchronisation enables co-located LAP-GPS devices to transmit and receive data without interfering with each other, allowing for better frequency reuse and increased network stability. In a cost-effective WISP deployment, the LAP-GPS is used as an Access Point in an airMAX AC Point-to-MultiPoint network.
LTU-ROCKET Ubiquiti introduces the LTU Rocket®, the first Point-to-Multi-Point (PtMP) BaseStation radio in LTU™ product family. Operating in the 5 GHz frequency band, the LTU Rocket is a spectrally efficient, noise-resilient PtMP AP specifically designed for wireless ISPs (WISPs).Incorporating Ubiquiti’s proprietary LTU technology, the LTU-Rocket is a Point-to-MultiPoint (PtMP) 5 GHz Access Point featuring 2+ Mpps processing, proprietary RF filtering, and flexible GPS sync for superior performance. Channel width flexibility (10/20/30/40/50 MHz) allows independent TX and RX channel frequency configurations anywhere within the radio band to avoid local interference. A custom co-processor is included for future performance and feature upgrades. Functions in a PtMP environment using the LTU-Pro, LTU-Lite for subscriber stations.Primary features of the LTU Rocket include:• 600+ Mbps PtMP performance(1)• Up to 64 client connections per AP(2)• 2+ Million pps• Proprietary RF filtering (1) 1+ Gbps with future firmware upgrade. (2) 255 client connections with future firmware upgrade. Superior PerformanceLTU is a new, proprietary technology with custom silicon and radio design that break through the limitations of 802.11 Wi-Fi technology. This enables LTU to deliver far superior performance over previous airMAX products that are based on 802.11 Wi-Fi.The LTU Rocket is designed for WISPs from the ground floor up. Its core communications processing engine enables low latency, long-range capability, DFS flexibility, higher constellations, better power output, and improved receive sensitivity.Seamless CompatibilityThe LTU Rocket is designed to be paired with a variety of Ubiquiti antennas to suit the needs of each installation. The radio includes a mounting bracket that allows it to be used with a 5 GHz airMAX® Sector antenna or airMAX Omni antenna for a complete 5 GHz PtMP BaseStation. You can even pair three LTU Rocket radios with the airPrism® 5 GHz 3x30° HD Sector Antenna for co-location deployments.The LTU Rocket also works with any CPE device in the LTU family, such as the LTU-Pro.
