The DMG-07 is a 2-in-1 WiFi & Bluetooth 4.2 adapter. It allows you to connect a notebook or PC to the WiFi network at home or in the office. The WiFi (802.11 a/b/g/n/ac (WiFi 5)) USB 2.0 adapter is ideally suited for accessing the Internet at speeds of up to 650Mbit/s on a 2.4GHz or 5GHz network. In addition to the WiFi function, the DMG-07 also offers a Bluetooth 4.2 interface, allowing the computer to connect to a smartphone, tablet, or another Bluetooth device. Since WiFi and Bluetooth connections are possible at the same time, the DMG-07 can, for example, play files from the WiFi network directly on a Bluetooth speaker or headphones.
Advanced Manageable PoE Solution for Hardened Environment PLANET IGS-6325-16P4S L3 Industrial Managed PoE+ Switch, featuring 16 10/100/1000BASE-T 802.3at PoE+ ports with each port powering up to 36 watts, and 4 100/1000/2500BASE-X fiber ports in an IP30 rugged metal case, can be installed in any difficult environment. It provides user-friendly yet advanced IPv6/IPv4 management interfaces, abundant L2/L4 switching functions, Layer 3 OSPFv2 dynamic routing capability, and advanced ITU-G.8032 ERPS Ring technology to improve the rapid self-recovery capability and PLANET intelligent PoE functions for controlling the PoE outdoor IP surveillance and wireless network applications. It is able to operate reliably, stably and quietly in the temperature range from -40 to 75 degrees C. Cybersecurity Network Solution to Minimize Security Risks The IGS-6325 Series supports SSHv2, TLS and SSL protocols to provide strong protection against advanced threats. It includes a range of cybersecurity features such as DHCP Snooping, IP Source Guard, ARP Inspection Protection, 802.1x port-based and MAC-based network access control, RADIUS and TACACS+ user accounts management, SNMPv3 authentication, and so on to complement it as an all-security solution. Redundant Ring, Fast Recovery for Critical Network Applications The IGS-6325-16P4S supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a simple Ring network, the recovery time of data link can be as fast as 10ms. High Power PoE for Security and Public Service Applications As the whole system comes with a total 320-watt PoE budget, the IGS-6325-16P4S is designed specifically to satisfy the growing demand of higher power consuming network PDs (powered devices) such as multi-channel (802.11a/b/g/n) wireless LAN access points, PTZ (pan, tilt, zoom) speed dome network cameras and other PoE network devices. Convenient and Smart ONVIF Devices with Detection Feature PLANET has newly developed an awesome feature -- ONVIF Support -- which is specifically designed for co-operating with video IP surveillances. From the IGS-6325-16P4S GUI, clients just need one click to search and show all of the ONVIF devices via network application. In addition, clients can upload floor images to the switch series, making the deployments of surveillance and other devices easy for planning and inspection purposes. Moreover, clients can get real-time surveillance’s information and online/offline status; the PoE reboot can be controlled from the GUI. Intelligent Alive Check for Powered Device The IGS-6325-16P4S PoE Switch can be configured to monitor connected PD’s status in real time via ping action. Once the PD stops working and responding, the IGS-6325-16P4S will recycle the PoE port power and bring the PD back to work. It also greatly enhances the reliability in that the PoE port will reset the PD power, thus reducing administrator’s management burden. PoE Schedule for Energy Saving Under the trend of energy saving worldwide and contributing to environmental protection on the Earth, the IGS-6325-16P4S can effectively control the power supply besides its capability of giving high watts power. The built-in “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and money. Scheduled Power Recycling The IGS-6325-16P4S allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specific time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow. SMTP/SNMP Trap Event Alert The IGS-6325-16P4S provides event alert function to help to diagnose the abnormal device owing to whether or not there is a break of the network connection, or the rebooting response. Effective Alarm Alert for Better Protection The IGS-6325 Series supports a Fault Alarm feature which can alert the users when there is something wrong with the switches. With this ideal feature, the users would not have to waste time finding where the problem is. It will help to save time and human resource. Digital Input and Digital Output for External Alarm The IGS-6325 Series supports Digital Input and Digital Output on its upper panel. This external alarm enables users to use Digital Input to detect and log external device status (such as door intrusion detector), and send event alarm to the administrators. The Digital Output could be used to alarm the administrators if the IGS-6325 Series’ port shows link down, link up or power failure. Layer 3 Routing Support The IGS-6325-16P4S enables the administrator to conveniently boost network efficiency by configuring Layer 3 IPv4/IPv6 VLAN static routing manually, and the IPv4 OSPFv2 (Open Shortest Path First) settings automatically. The OSPF is an interior dynamic routing protocol for autonomous system based on link state. The protocol creates a database for link state by exchanging link states among Layer 3 switches, and then uses the Shortest Path First algorithm to generate a route table based on that database. Robust Layer 2 Features The IGS-6325 Series can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Rapid Spanning Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP snooping. The IGS-6325 Series provides 802.1Q tagged VLAN, and the VLAN groups allowed will be maximally up to 255. Via aggregation of supporting ports, the IGS-6325 Series allows the operation of a high-speed trunk combining multiple ports. It enables a maximum of up to 6 trunk groups with 4 ports per trunk group, and supports fail-over as well. Efficient Management For efficient management, the IGS-6325 Series is equipped with console, Web and SNMP management interfaces. With the built-in Web-based management interface, the IGS-6325 Series offers an easy-to-use, platform-independent management and configuration facility. For text-based management, the IGS-6325 Series can be accessed via Telnet and the console port. Moreover, it also offers secure remote management via any standard-based management software by supporting SNMPv3 connection which encrypts the packet content at each session. Powerful Security The IGS-6325 Series offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1x Port-based and MAC-based user and device authentication. With the private VLAN function, communication between edge ports can be prevented to ensure user privacy. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before. Modbus TCP Provides Flexible Network Connectivity for Factory Automation With the supported Modbus TCP/IP protocol, the IGS-6325 Series can easily integrate with SCADA systems, HMI systems and other data acquisition systems in factory floors. It enables administrators to remotely monitor the industrial Ethernet switch’s operating information, port information and communication status, thus easily achieving enhanced monitoring and maintenance of the entire factory. 1588 Time Protocol for Industrial Computing Networks The IGS-6325 Series is ideal for telecom and Carrier Ethernet applications, supporting MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet. Flexibility and Extension Solution The additional four mini-GBIC slots built in the IGS-6325-16P4S support dual speed, 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required. The distance can be extended from 550 meters (multi-mode fiber) to 10/40/80/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions. Intelligent SFP Diagnosis Mechanism The IGS-6325 Series supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. Industrial Area Department/Workgroup PoE Switch Providing up to 16 PoE+, in-line power interfaces, the IGS-6325-16P4S can easily build a power centrally controlled for IP phone system, IP camera system, or wireless AP group for Industrial network. For instance, 16 PoE IP cameras or wireless access points can be easily installed around the corner in the industrial environment for surveillance demands or for a wireless roaming network. Without the power-socket limitation, the IGS-6325-16P4S makes the installation of IP cameras or wireless AP easier and more efficient.
Perfect Managed Switches with Advanced L2/L4 Switching and Security PLANET GS-4210-24T4S and GS-4210-24T4SR are the ideal Gigabit Switches which provide cost-effective advantage to local area networks and are widely accepted in the SMB office network. They offer intelligent L2/L4 data packet switching and management functions, friendly web user interface and stable operation. Besides the popular IPv6/IPv4 management and abundant L2/L4 switching functions, the GS-4210-24T4S and GS-4210-24T4SR come with fanless feature and green technology to provide a quiet, energy-saving, high-speed and reliable office network environment. The GS-4210-24T4S and GS-4210-24T4SR are equipped with 24 10/100/1000BASE-T Gigabit Ethernet ports and 4 additional 100/1000BASE-X SFP interfaces with built-in AC or AC+DC redundant power system. They offer a rack-mountable, affordable, safe and reliable Gigabit network switch solution for SMBs deploying networks, or requiring enhanced data security and network traffic management. Cybersecurity Network Solution to Minimize Security Risks The GS-4210-24T4S(R) supports SSHv2 and TLS protocols to provide strong protection against advanced threats. It includes a range of cybersecurity features such as DHCP Snooping, IP Source Guard, dynamic ARP Inspection Protection, 802.1x port-based network access control, RADIUS and TACACS+ user accounts management, SNMPv3 authentication, and so on to complement it as an all-security solution. Redundant Ring, Fast Recovery for Critical Network Applications The GS-4210-24T4S(R) supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP) into customer’s network to enhance system reliability and uptime in various environments. Redundant AC/DC Power Supply to Ensure Continuous Operation The GS-4210-24T4SR is particularly equipped with one 100~240V AC power supply unit and one 36~72V DC power supply unit to provide an enhanced reliable and scalable redundant power supply, the continuous power system is specifically designed to fulfill the demands of high-tech facilities requiring the highest power integrity. With the 36~72V DC power supply, the GS-4210-24T4SR is able to act as a telecom-level device that can be located in the electronic room. IPv6/IPv4 Dual Stack Management Supporting both IPv6 and IPv4 protocols, the GS-4210-24T4S and GS-4210-24T4SR help the SMBs to step in the IPv6 era with the lowest investment as their network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up. Robust Layer 2 Features The GS-4210-24T4S and GS-4210-24T4SR can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN and Q-in-Q VLAN, Multiple Spanning Tree protocol (MSTP), loop and BPDU guard, IGMP snooping, and MLD snooping. Via the link aggregation, the GS-4210-24T4S and GS-4210-24T4SR allow the operation of a high-speed trunk to combine with multiple ports, and supports fail-over as well. Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2 protocol included to help discover basic information about neighboring devices on the local broadcast domain. Efficient Traffic Control The GS-4210-24T4S and GS-4210-24T4SR are loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast / multicast storm control, per port bandwidth control, IP DSCP QoS priority and remarking. They guarantee the best performance for VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources. Powerful Security PLANET GS-4210-24T4S and GS-4210-24T4SR offer comprehensive IPv4/IPv6 Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. They can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Their protection mechanism also comprises 802.1X port-based user and device authentication, which can be deployed with RADIUS and TACACS+ to ensure the port level security and block illegal users. With the protected port function, communication between edge ports can be prevented to guarantee user privacy. Furthermore, Port security function allows to limit the number of network devices on a given port. Friendly and Secure Management For efficient management, the GS-4210-24T4S and GS-4210-24T4SR are equipped with web, Telnet and SNMP management interfaces. With the built-in Web-based management interface, the GS-4210-24T4S and GS-4210-24T4SR offer an easy-to-use, platform-independent management and configuration facility. For text-based management, the switches can be accessed via Telnet and the console port. By supporting the standard SNMP, the switches can be managed via any standard management software Moreover, the GS-4210-24T4S and GS-4210-24T4SR offers secure remote management by supporting SSHv2, TLSv1.2 and SNMP v3 connections which encrypt the packet content at each session. Flexibility and Long-distance Extension Solution The GS-4210-24T4S and GS-4210-24T4SR provide 4 extra Gigabit SFP interfaces supporting 100BASE-FX/1000BASE-SX/LX SFP (small form-factor pluggable) fiber transceiver to uplink to backbone switch and monitoring center in long distance. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and up to above 10/20/40/60/80/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions. Fanless Design Adopting the latest chip process and green technology, the GS-4210-24T4S and GS-4210-24T4SR successfully reduce substantial power consumption with the fanless and noiseless design collocating with the effective cooler. Therefore, the GS-4210-24T4S and GS-4210-24T4SR are able to operate stably and quietly in any environment without affecting their performance. Department/Edge Security and QoS Switch The GS-4210-24T4S and GS-4210-24T4SR connect up to 24 high-speed workstations in the Ethernet environment, in which their four SFP mini-GBIC interfaces provide an uplink to a department backbone. Moreover, the Switches provide 56Gbps switch fabric and high bandwidth for backbone connection. The GS-4210-24T4S and GS-4210-24T4SR improve the network efficiency and safeguard the network clients with their powerful features: IPv6/IPv4 management Layer 2 to Layer 4 security QoS 802.1x port-based and MAC-based network access authentication security Multicast IGMP snooping The advanced functionality of the GS-4210-24T4S and GS-4210-24T4SR eliminates traditional issues associated with the use of Ethernet. Users can be separated with advanced VLAN functionality to enhance security. It makes the GS-4210-24T4S and GS-4210-24T4SR one of the best and most cost-effective switch solutions for SMBs. High-performance Backbone/Server Farm Switch Gigabit Ethernet supported equipment has become the fundamental unit of enterprises and network servers. With up to 56Gbps non-blocking switch fabric, the GS-4210-24T4S and GS-4210-24T4SR can easily provide a local high bandwidth Gigabit Ethernet network for backbone of enterprises or telecoms. With its port trunking function, a 16 GB fat pipe is provided to connect to the backbone if required. It is ideal to be used as a server farm switch connecting to servers. The GS-4210-24T4S and GS-4210-24T4SR can offer the uplink to the edge network through Gigabit Ethernet LX/SX SFP modules with the two SFP ports. FTTX/MAN Application The GS-4210-24T4S and GS-4210-24T4SR apply the double tag VLAN (Q-in-Q) technology to providing low cost and easy operation for service providers carrying traffic for multiple customers across their networks. It features SNMP v3 and RMON Groups. The SNMPv3 security structure consists of security models, with each model having its own security levels. With two dual-speed SFP slots built in, the deployment distance of the GS-4210-24T4S and GS-4210-24T4SR can be extended up to 120 kilometers (single-mode fiber), which provides a high-performance edge service for FTTx solutions. To build a network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for ISPs, and FTTB (Fiber to the Building) for enterprises, the various distances of SFP and Bidi (WDM) transceivers are optional for customers’ choices. For security and various applications, the 24 Gigabit ports of the GS-4210-24T4S and GS-4210-24T4SR can be configured with VLAN settings and connected to different units, offices, floors, houses and departments. Physical Port 24-Port 10/100/1000BASE-T Gigabit RJ45 copper 4 100/1000BASE-X mini-GBIC/SFP slots RJ45 console interface for switch basic management and setup Reset button for system factory default Switching Hardware-based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation, and auto MDI/MDI-X Features Store-and-Forward mode with wire-speed filtering and forwarding rates IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation 10K jumbo frame Automatic address learning and address aging Supports CSMA/CD protocol Layer 2 Features Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth Supports VLAN IEEE 802.1Q tagged VLAN Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) Protocol VLAN Voice VLAN Private VLAN Management VLAN GVRP Supports Spanning Tree Protocol STP (Spanning Tree Protocol) RSTP (Rapid Spanning Tree Protocol) MSTP (Multiple Spanning Tree Protocol) STP BPDU Guard, BPDU Filtering and BPDU Forwarding Supports Link Aggregation IEEE 802.3ad Link Aggregation Control Protocol (LACP) Cisco ether-channel (Static Trunk) Maximum 8 trunk groups, up to 8 ports per trunk group Provides port mirror (many-to-1) Loop protection to avoid broadcast loops Supports ERPS (Ethernet Ring Protection Switching) Quality of Service Ingress/Egress Rate Limit per port bandwidth control Storm Control support Broadcast/Unknown-Unicast/Unknown-Multicast Traffic classification IEEE 802.1p CoS TOS/DSCP/IP Precedence of IPv4/IPv6 packets Strict priority and Weighted Round Robin (WRR) CoS policies Multicast Supports IPv4 IGMP snooping v2 and v3 Supports IPv6 MLD snooping v1, v2 IGMP querier mode support IGMP snooping port filtering MLD snooping port filtering Security Authentication IEEE 802.1X Port-based network access authentication Built-in RADIUS client to co-operate with the RADIUS servers DHCP Option 82 RADIUS/TACACS+ login user access authentication Access Control List IPv4/IPv6 IP-based ACL IPv4/IPv6 IP-based ACE MAC-based ACL MAC-based ACE MAC Security Static MAC MAC Filtering Port Security for Source MAC address entries filtering DHCP Snooping to filter distrusted DHCP messages Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding IP Source Guard prevents IP spoofing attacks DoS Attack Prevention Management IPv4 and IPv6 dual stack management Switch Management Interface Web switch management Console/Telnet Command Line Interface SNMP v1 and v2c switch management SSHv2, TLSv1.2 and SNMP v3 secure access SNMP Management Four RMON groups (history, statistics, alarms, and events) SNMP trap for interface Link Up and Link Down notification User Privilege Levels Control Built-in Trivial File Transfer Protocol (TFTP) client BOOTP and DHCP for IP address assignment System Maintenance Firmware upload/download via HTTP/TFTP Configuration upload/download through Web interface Dual Images Hardware reset button for system reboot or reset to factory default SNTP Network Time Protocol Network Diagnostic
High Performance Gigabit Ethernet over Coaxial Solution To fulfill the needs of long distance and higher speed required Ethernet over Coaxial applications, PLANET Technology offers a new-generation Ethernet over Coaxial Converter, VC-232G. It features 1 10/100/1000BASE-T RJ45 port and 1 BNC female connector with a compact-sized metal housing, making the placement of the unit convenient. Working well with a pervasive coaxial network, the VC-232G provides an excellent bandwidth of up to a total duplex data rate of 300Mbps which can extend a maximum distance up to 1.4km. It is ideal for extending the distance and signal conversion by transmitting the Ethernet data from the coaxial cable to another 100-meter UTP cable for any type of IP network device such as HD IP camera, wireless access point, NVR and digital signage. Superior Upstream and Downstream Transmission The VC-232G is based on the two-core networking technology, Gigabit Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The VC-232G offers a stable yet high-speed point-to-point network access up to a duplex data transmission of 300Mbps. It provides 2 selective transmission modes -- asymmetric mode or symmetric mode -- for the transmission of upstream and downstream signals. ■ Asymmetric mode – downstream up to 200Mbps and upstream up to 100Mbps ■ Symmetric mode – downstream up to 150Mbps and upstream up to 150Mbps The symmetric mode provides similar transmission rate on both downstream and upstream. On the other hand, the asymmetric mode performs higher transmission quality in short range. In all, when the VC-232G is in symmetric mode, it provides better upstream performance, and when it is in asymmetric mode, it gives better downstream performance. IP Ethernet over Long Distance Existing Coaxial Cables The VC-232G is also a Long Reach Ethernet (LRE) solution which provides a quick replacement and smooth migration solution from existing analog system to full digital system. A normal UTP cable can only be extended up to 100 meters, but with the VC-232G, the distance for Ethernet networking can be extended up to 1,400 meters (4,593ft.), which is ideal for the following network applications: ■ Long-distance IP network devices ■ IP digital signage ■ Cable TV to IPTV ■ Distance video education ■ Electronic billboards ■ Other applications If you have coaxial cable in your existing environment, you can install a pair of the VC-232G very simply without the need to build additional network wires, thus saving costs for network construction. Easy and Flexible Installation The VC-232G offers two operation modes, the client-side CPE and central-side CO, making any network applications easy and flexible. The CPE or CO mode can be adjusted by using the built-in DIP switch. For point-to-point connection, one VC-232G in CPE mode and the other one in CO mode must be set up as a pair of converters to perform the connection. This enables the administrator to efficiently manage the network over coaxial cable, making long-distance transmission better. Point-to-Point Application -- LAN to LAN Connection One set of the VC-232G could be used to link two local Area networks that are located in different places. Through the coaxial cable, it could set up a 200/100Mbps asymmetric backbone, but one VC-232G must be Master (CO mode) and the other one is Slave (CPE mode). Community/Campus Surveillance and Security over IP To take advantage of digital surveillance system and keep the benefits of coaxial cable, the VC-232G helps the community, campus and enterprises to upgrade analog camera system to IP camera surveillance without using additional new wires. The VC-232G is a switching architecture with one RJ45 port and one BNC Ethernet over Coaxial port. Just plug in the UTP cable of IP camera to Ethernet port and the existing coaxial cable to the BNC connector to easily deploy and extend the distance with signal conversion by transmitting the Ethernet data from the standard coaxial cable.
Distance Extension with High Performance and Steady Network Communication PLANET 10/100Base-TX to 100Base-FX Industrial Media Converter IFT-80xT series extends communication distance with stable performance via fiber optic wire, in which the extended distance could be up to 2km with the IFT-802T, up to 15km with the IFT-802TS15 or up to 20km with the IFT-805AT (depending on SFP module). The IFT-80xT series is specifically equipped with durable components and strong housing case to operate reliably in electrically harsh and climatically demanding environments. The industrial level media converter provides a high level of immunity to electromagnetic interference and heavy electrical surges which are usually found on plant floors or traffic control cabinets on sidewalk. Being able to operate under the temperature range from -40 to 75 degrees C allows the IFT-80xT series to be placed in almost any difficult environment. Robust Media Converter Performance PLANET IFT-80xT 10/100Base-TX to 100Base-FX Industrial Media Converter series efficiently converts data between 10/100Base-TX and 100Base-FX network. The IFT-80xT series provides the flexibility to all kinds of 10/100Mbps Ethernet Media on RJ-45 port and performs highly stable fiber performance. Easy Installation and Wide Range of Power Usages The IFT-80xT series is packaged in a compact IP-30 case that allows either DIN rail or panel mounting to have efficient usage of cabinet space. It provides an integrated power supply with a wide range of voltages for worldwide operation. It also offers dual-redundant, reversible polarity 12V DC to 48V DC power supply inputs for high availability applications requiring dual or backup power inputs. Transport Networking PLANET’s Industrial Media Converter, IFT-80xT series, offers high reliability and security to guarantee the continuous industrial operation in harsh environments such as control cabinet of transportation, factory floors or and environments with extremely low or high temperature. In the industrial networking environments, each networked device is required to keep running continuously in the hazardous status. If industrial equipment fails to connect to the network, it might influence the entire operation of industrial systems and thus cause incredibly financial loss. With the IFT-80xT Industrial Media Converter, which complies with all the requirements of industrial applications, customers may enjoy high reliability, fast recovery capability, and safe Ethernet network operation. Fiber-optic Networking for ISPs, Enterprises, and Homes With stable performance of data transmission and easy installation, the IFT-80xT Industrial Media Converter series can build an ISP network solution of FTTH (Fiber to the Home), FTTC (Fiber to the Curb) for ISPs, or FTTB (Fiber to the Building) for enterprises with small office network environment.
8 x Gigabit PoE++ ports (up to 95W) 8 x Gigabit PoE+ ports (up to 30W) 2 x Gigabit SFP Slots 440W PoE power budget 36Gbps switching capacity Internal power supply Sturdy 1U 19” rack mountable metal housing
16 x Gigabit PoE+ porti (kuni 30W portide kohta) 2 x Gigabit SFP-pesa 240W PoE võimsuse eelarve 36Gbps kommutatsioonivõimsus Sisemine toiteallikas Tugev 1U 19" rack-paigaldatav metallkorpus TRENDneti Haldamata Gigabit PoE+ kommutaatorid pakuvad suure ribalaiusega jõudlust, kasutusmugavust ja usaldusväärsust. Need IEEE 802.3at standardile vastavad kommutaatorid on mugavalt varustatud tugeva 1U 19" rack-paigaldatava metallkorpusega, mille paigaldusklambrid on kaasas. Need SFP-pesadega Gigabit PoE+ lülitid toetavad ka pikamaa kiudoptilise võrgu rakendusi. Paigaldajad ja integraatorid saavad TRENDneti haldamata gigabit PoE+-switchide abil säästa seadmekulusid ja vähendada paigaldusaega, kuna need pakuvad kuni 30 W PoE+-toite ja andmeid pordi kohta olemasolevate Ethernet-kaablite kaudu. Nende SFP-toega usaldusväärsete gigabit PoE+-switchi abil saate hõlpsasti võrku ühendada PoE-seadmeid, näiteks suure võimsusega traadita juurdepääsupunkte, PTZ-kaameraid, digitaalseid sildid, IPTV-dekoodereid ja juurdepääsukontrolli seadmeid.
Seda Delocki kaablit saab kasutada kahe arvuti ühendamiseks. Seega on võimalik edastada andmeid mõlemas suunas USB 3.2 Gen 1 kiirusega. Lisaks saab kasutada ühte hiirt ja ühte klaviatuuri mõlema arvuti jaoks. Lihtsalt veeretades kursorit ühelt ekraanilt teisele ekraanile aktiveeritakse vastav arvuti. Spetsifikatsioon Ühendused: 1 x SuperSpeed USB 5 Gbps (USB 3.2 Gen 1) Type-A isasühendus 1 x SuperSpeed USB 5 Gbps (USB 3.2 Gen 1) Type-A isasühendus Kiibistik: OTI7300 Klaviatuuri ja hiirt saab kasutada kahes arvutis Üleminek arvutite vahel kursori kerimise või kiirklahvi abil (reguleeritav) Võimalik andmeedastus mõlemas suunas Draiverid paigaldatakse automaatselt, integreeritud kaablisse Kaabli gabariit: 28 AWG andmeliin 24 AWG toiteliin Kontaktid kullatud Värv: must Pikkus koos pistikutega: ca. 1,5 m Süsteeminõuded Mac OS 10.9.5 - 10.12.6 Windows 7/7-64/8.1/8.1-64/10/10-64/11 PC või sülearvuti, millel on vaba USB A-tüüpi port Pakendi sisu USB 3.2 Gen 1 andmeühenduskaabel Kasutusjuhend
Seda USB-mikrofoni saab kasutada kvaliteetsete kõne- ja häälülekannete jaoks. Mikrofonil on ringjoon (kõik suunad) ja see hoiab akustilist signaali igal juhul. Suure võimsuse, madala mürataseme ja täpse jõudluse tõttu salvestatakse optimaalselt isegi parimad helid. Lauaalust saab vajadusel kokku voldida ja hõlpsalt transportida.
• Managed L2/L3 Web-based management SNMP • Quality of Service (QoS) support Configuring Location Settings (CLI) • 10G support • MAC address table: 32000 entries Interface-based multicast traffic statistics • Access Control List (ACL) • 1U Rack mounting • AC Power supply included
USB Bluetooth v.5.0 dongle - ENJOY THE FREEDOM OF WIRELESS TECHNOLOGY - Large operating distance - Easily connect any Bluetooth device to your PC - Fast & easy file transfer between your PC and mobile devices - Perfect for streaming high quality stereo music - Windows 11 compatible Type Adapter Bluetooth 5.0, Wireless Frequency Range 2.402 - 2.48 GHz
The MikroTik 100 Gigabit product line keeps growing: QSFP28 module for distances up to 100m MikroTik 100 Gigabit product line keeps growing: QSFP28 module for distances up to 100m Add this QSFP module for distances up to 100 meters to your CCR2216, CRS504 or CRS518 setups and enjoy real speed and ultimate reliability. This optical module offers four independent full-duplex channels with up to 25 Gbps per channel bandwidth and an aggregate bandwidth of 100 Gbps. The module has built-in digital diagnostic functions such as optical power monitoring.
Seda Delocki SAS-kaablit saab kasutada sisemiste SAS-seadmete ühendamiseks, nt Mini SAS-liitmikuga kontrolleri ja 4 SATA-pordiga kõvaketta ühendamiseks. Spetsifikatsioon - Liitmikud: 1 x Mini SAS SFF-8087 isasliides: 1 x Mini SAS SFF-8087 isasliides seade: 4 x 7-poldiline SATA-pesa: 4 x 7-poldiline SATA-pesa - Serial Attached SCSI (SAS) spetsifikatsioon - Pikkus koos pistikutega: ca 0,5 m Süsteeminõuded - Vaba Mini SAS-liides Pakendi sisu - Mini SAS-kaabel
Seda Delocki SAS-kaablit saab kasutada Mini SAS HD SFF-8644 pistikuga väliste ketaste ühendamiseks Mini SAS HD SFF-8644 pistikuga kontrolleriga. Spetsifikatsioon - Liitmikud: 1 x Mini SAS HD SFF-8644 isane > 1 x Mini SAS HD SFF-8644 isasühendus - Serial Attached SCSI (SAS) spetsifikatsioon - Kaabli gabariit: 28 AWG - Andmeedastuskiirus kuni 12 Gb/s - Pikkus koos pistikutega: ca 1 m Süsteeminõuded - Vaba Mini SAS HD-liides Pakendi sisu - Mini SAS HD kaabel
See Delocki korpus võimaldab paigaldada M.2 PCIe NVMe SSD-d 2280, 2260, 2242 ja 2230 formaadis, seda saab ühendada USB kaudu arvutiga või sülearvutiga. Vastupidav metallkorpus koos jahutusribadega ülaosas tagab mälu optimaalse temperatuuri. Spetsifikatsioon - Ühendused: välised: 1 x SuperSpeed USB 10 Gbps (USB 3.2 Gen 2) USB Type-C™ emane sisemine: 1 x 67-poolne M.2 võtme M pesa - Kiibistik: JMicron JMS583 - Toetab M.2-mooduleid formaadis 2280, 2260, 2242 ja 2230 koos M-klahviga või PCIe (NVMe) baasil võtmega B+M. - Komponentide maksimaalne kõrgus moodulis: 1,5 mm, toetatakse kahepoolselt kokkupandud moodulite rakendamist - Toetab NVM Express (NVMe) - Käivitatav - Andmeedastuskiirus kuni 10 Gbps - LED-indikaator toite ja juurdepääsu jaoks - Mõõtmed (LxSxK): ca. 102 x 34 x 12 mm - Hot Plug, Plug & Play Süsteeminõuded - Chrome OS - Linuxi tuum 4.6 või uuem - Mac OS 10.13.3 või uuem - Windows 7/7-64/8.1/8.1-64/10/10-64/11 - Arvuti või sülearvuti, millel on vaba USB Type-C™ port Pakendi sisu - Väline M.2 korpus - Kruvikeeraja - Paigaldusmaterjal - Kaabel USB-C™ isane USB-C™ isane, pikkus ca. 30 cm - 1 x termoplaat - Kasutusjuhend
This USB memory stick by Delock can be used to save and transport data, e.g. photos, videos or music. The USB stick can be connected optionally via the USB Type-C™ or USB Type-A plug, the inner part is simply turned and then latch into place. Due to the stylish design with eyelet, the small USB memory stick can be easily attached to the key ring for transport. Small sturdy helper Due to its small dimensions and its sturdy housing, this Delock USB stick is particularly suitable for travelling. Due to its tiny size, the USB stick fits into any trouser pocket. Downwards compatible The USB 3.2 Gen 1 Type-A connector is compatible to its forerunners USB 3.0, USB 2.0 and USB 1.1. Thus the memory stick can be connected to a USB 2.0 or USB 1.1 port too. The data transfer rate complies with the respective specification. Specification • Connectors: 1 x SuperSpeed USB (USB 3.2 Gen 1) Type-A male 1 x SuperSpeed USB (USB 3.2 Gen 1) USB Type-C™ male • Capacity: 64 GB • Maximum read speed: 100 MB/s • Maximum write speed: 46 MB/s • Maximum write cycles: 3000 • Operating temperature: 0 °C ~ 70 °C • Storage temperature: -25 °C ~ 85 °C • Power consumption: max. 5 W • Field of application: consumer • Plug & Play • Dimensions (LxWxH): ca. 36.8 x 12.1 x 7.1 mm System requirements • Chrome OS 72.0 or above • Linux Kernel 3.3 or above • Mac OS 10.14.3 or above • Windows 7/7-64/8.1/8.1-64/10/10-64 • PC or laptop with a free USB Type-A port or • PC or laptop with a free USB Type-C™ port Package content • USB 3.0 memory stick
Seda Delocki SFP-moodulit saab kasutada Gigabitise switchi laiendamiseks vaba SFP-pesaga optilise kiudliidese abil. Spetsifikatsioon • Ühendused: 1 x SFP isane > 1 x LC Duplex emane • Andmeedastuskiirus: Gigabit Ethernet kuni 1 Gbps • Mitmemoodilise kiu jaoks • Kiud: 50/125 µm, kuni 550 m • Kiud: 62,5/125 µm, kuni 275 m • 850 nm lainepikkus • Töötemperatuur: 0 °C ~ 70 °C
See Delocki GSM-antenn võimaldab kasutada erinevaid GSM-sagedusalasid nii sees kui ka väljas. See on täielikult ühilduv GSM, ZigBee 868 MHz / 915 MHz, DECT, Z-Wave ja LoRa 868 MHz / 915 MHz. Spetsifikatsioon - Ühendus: 1 x SMA-pistik - Sagedusvahemik: 824 - 960 MHz 1710 - 1990 MHz - ZigBee 868 MHz / 915 MHz, DECT, Z-Wave, LoRa 868 MHz / 915 MHz. - Antenni võimendus: 5 dBi - Impedants: 50 Ohm - Polarisatsioon: vertikaalne - VSWR: 2,0 - Ülekandevõimsus: 50 W - Töötemperatuur: -30 °C ~ 70 °C - Värv: must - Kaabel: koaksiaalkaabel - Kaabli tüüp: RG-58 - Kaabli värvus: must - Kaabli sumbuvus: 0,6 dB @ 1 GHz meetri kohta - Kaabli läbimõõt: ca 4,95 mm - Kaabli pikkus koos pistikuga: ca 3 m - Antenni pikkus koos magnetilise alusega: ca. 31,9 cm - Magnetilise aluse läbimõõt: ca. 77,0 mm Süsteeminõuded - Vaba SMA-pistikuga seade Pakendi sisu - Antenn
This Wireless LAN antenna can be connected to a WLAN device with RP-SMA interface, in order to send and receive signals. Specification • Connector: RP-SMA plug • Frequency range: 2.400 - 2.500 GHz 5.150 - 5.875 GHz • Antenna gain: 5 dBi @ 2.400 - 2.500 GHz 7 dBi @ 5.150 - 5.875 GHz • Impedance: 50 Ohm • Polarisation: linear, vertical • VSWR: 2.0 • Operating temperature: -10 °C ~ 55 °C • Housing material: ABS • Colour: black • Length: ca. 231.10 mm (with tilt joint) ca. 205.00 mm (without tilt joint) • Diameter: ca. 18.40 mm (top) ca. 13.15 mm (RP-SMA) System requirements • Device with a free RP-SMA jack Package content • WLAN antenna
