netPower 16PAn outdoor 18 port switch with 16 Gigabit PoE-out ports and 2 SFP+. Power all your access points anywhere!Powering a bunch of access points or IP cameras and a few uplinks on a tower has never been easier. netPower 16P has 16 Gigabit Ethernet ports with PoE-out and two SFP+ ports for 10G fiber uplinks.Its sturdy and compact outdoor enclosure allows the switch to be mounted in all kinds of environments – from damp attics and shafts to towers masts and poles with hose clamps.netPower 16P has a non-blocking throughput of 36 Gbps switching capacity of 72 Gbps and forwarding rate of 53.6 Mpps.* Power supply is NOT included with the product. You are welcome to use your preferred power option like battery pack etc. Compatible also with MikroTik power supplies 24HPOW 48POW and 48V2A96W
The Kolink PCIe 5.0 x16 riser cable with 90° angle in detail This cable allows you to strategically extend the PCI Express x16 slot present on a motherboard. With backward compatibility to previous PCIe generations and most Kolink cases, this cable effortlessly connects your graphics card and motherboard with transfer speeds of up to 32 GT/s. Even in modding projects or in cases that deviate from the common ATX standard, it may be necessary or practical to place PCI Express expansion cards in unusual positions. The outer material is made of TPE and has flexible segments that facilitate gentle bends. A particular advantage of a riser cable is the ability to position graphics cards vertically, for example, and thus mount them parallel to the motherboard. This allows the card’s cooler to be fully showcased.
• 25GBASE-SR/SW SFP module • Up to 25 Gbps link speed • Supports 50 µm and 125 µm multi mode fiber (max. distance 100 m) • Wavelength 850 nm • LC connector • Connection to SFP28 ports • Swappable during system operation
• Multi-Gigabit access switch with 36x 2.5G and 12x 10G multi-Gigabit Ethernet ports as well as 4x 25G SFP28 and 2x 100G QSFP28 uplink or stacking ports • PoE support as per IEEE 802.3bt PD-Type 4 on all 48 Ethernet ports with up to 1,440 watts PoE budget • Support of Virtual Port Channel (VPC or MC-LAG) to implement networks with 100% uptime • Full layer 3 functionality thanks to VRRP, DHCP, static and policy-based dynamic routing via OSPF v2/v3 and BGP4 • Backplane stacking optionally (SW-defined) via SFP28 or QSFP28 ports • Incl. 1x hot-swappable PSU (second PSU optional) and 2x redundant (n+1), hot-swappable fans for maximum reliability • Security with configurable access control on all ports as per IEEE 802.1X and access control lists • Secure remote management through TACACS+, SSH, SSL, and SNMPv3 • Industry standard CLI • Cloud-managed LAN and switch stacking for fast configuration and convenient management via the LMC • IPv6 and IPv4 support for modern enterprise networks • Including switch slide-in rails (2x 19” mounting brackets and telescopic slides), serial & micro-USB configuration cables, and IEC power cord
• Multi-Gigabit access switch with 4x 1 Gigabit Ethernet ports, 4x 10G multi-Gigabit Ethernet ports, and 2x 25G SFP28 uplink ports • PoE support as per IEEE 802.3at (1G ports) and IEEE 802.3bt PD-Type 4 (10G ports) with up to 360 watts PoE budget • Non-stop PoE function – continuous supply of connected PoE devices in the event of a software update • IEEE 802.3az power saving feature – port deactivation when not transferring data • Ideal in combination with Wi-Fi 7 access points • Basic layer 3 features such as static routing and DHCP server • Security with configurable access control on all ports as per IEEE 802.1X and access control lists • Secure remote management through TACACS+, SSH, SSL, and SNMPv3 • Cloud-managed LAN for fast configuration and convenient management via the LMC • IPv6 and IPv4 support for modern enterprise networks • 5-year replacement service for all components
High-Performance L2+ PoE+ Solution with Static RoutingThe IGS-4215-16P4X is PLANET's Industrial-grade, DIN-rail L2+ Managed Gigabit PoE+ Switch, upgraded with L2+ static routing to enhance inter-VLAN communication and network efficiency. It offers 16 10/100/1000BASE-T ports with 802.3at PoE+ (up to 36W per port) and 4 10GBASE-X SFP+ fiber slots for high-speed uplinks.With a total PoE power budget of 360 watts (achievable only with dual power inputs), it supports diverse PoE applications, including IP cameras and wireless access points. Operating in extreme temperatures from -40 to 75°C, the IGS-4215-16P4X features advanced PoE management, IPv6/IPv4 dual stack support, and a rugged IP30 aluminum enclosure. Its USB Type-C console port ensures simple management, making it a reliable choice for demanding industrial environments.Cybersecurity Network Solution to Minimize Security RisksThe IGS-4215-16P4X supports SSHv2 and TLSv1.3 protocols to provide strong protection against advanced threats. It includes a range of cybersecurity features such as DHCP Snooping, IP Source Guard, Dynamic ARP Inspection Protection, RADIUS and TACACS+ user accounts management, SNMPv3 authentication, and so on to complement it as an all-security solution.Modbus TCP Provides Flexible Network Connectivity for Factory AutomationThe IGS-4215-16P4X supports the Modbus TCP protocol, allowing for easy integration with SCADA systems, HMI systems, and other data acquisition systems in factory floors. This enables administrators to remotely monitor the industrial Ethernet switch's operating information, port information, communication status, and DI/DO status, thereby enhancing monitoring and maintenance of the entire factory.Redundant Ring, Fast Recovery for Critical Network ApplicationsThe IGS-4215-16P4X supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology and Spanning Tree Protocol (802.1s MSTP) into customer’s network to enhance system reliability and uptime in various environments.Reliable Power and High-speed Data with IEEE 802.3at PoE+ SupportThe IGS-4215-16P4X is designed to meet the needs of networks with smaller to medium PoE power demands, complying with the IEEE 802.3at PoE+ standard. It delivers a total power capacity of 360 watts across its 16 PoE+ ports, with each port supporting up to 36 watts of power. This makes it ideal for powering a range of medium-power PoE-compliant devices (PDs) over standard Cat5e/6 Ethernet cabling.The IGS-4215-16P4X is better suited for applications with multiple devices that require moderate power. It’s an excellent choice for:PoE IP camerasWireless access points (APs)IP phones and VoIP systemsDigital signage displaysIndustrial IoT devicesONVIF Support Allows Effective and Centralized Control Over IP-based Security ProductsThe IGS-4215-16P4X switch offers ONVIF support as part of its versatile feature set for seamless integration with IP surveillance cameras. Through the switch's web GUI, users can easily search for and display all ONVIF-compliant devices on their LAN.Users can also upload floor plans to the switch and place IP surveillance cameras on the plan for more intuitive planning and faster inspection in the future. Additionally, the web GUI provides real-time surveillance information, online/offline status, and the ability to remotely reboot cameras.Intelligent Powered Device Alive CheckThe IGS-4215-16P4X can be configured to monitor connected PD (powered device) status in real time via ping action. Once the PD stops working and responding, the IGS-4215-16P4X will resume the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing the administrator’s management burden.Scheduled Power RecyclingThe IGS-4215-16P4X allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specified time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow.PoE Schedule for Energy SavingsUnder the global trend of energy savings and contributing to environmental protection, the IGS-4215-16P4X can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you enable or disable PoE power feeding for each PoE port during specified time intervals, which is a powerful function to help SMBs or enterprises save power and budget. It also increases security by powering off PDs that should not be in use during non-business hours.802.3at PoE+ Power and Ethernet Data Transmission Distance ExtensionIn the "Extend" operation mode, the IGS-4215-16P4X operates on a per-port basis with a 10Mbps duplex configuration. It can deliver 15-watt PoE power output over a distance of up to 250 meters, exceeding the standard 100-meter Ethernet UTP cable limit. This extended range allows PoE power to be supplied over longer distances without the need for additional cabling or electrical outlets, significantly reducing installation costs while maintaining network reliability.Effective Alarm Alert for Better ProtectionThe IGS-4215-16P4X incorporates a Fault Alarm feature that promptly notifies users of any issues with the switches. This valuable feature eliminates the need for users to spend time locating the problem, resulting in significant time and human resource savings.Digital Input and Digital Output for External AlarmThe IGS-4215-16P4X supports Digital Input and Digital Output through a terminal block located on its upper panel. This external alarm enables users to use Digital Input to detect and log external device status (such as door intrusion detector), and send event alarm to the administrators. The Digital Output could be used to alarm the administrators if the IGS-4215-16P4X port shows “link down”, “link up” or “power failure”.Environmentally Hardened DesignWith the IP30 aluminum industrial case, the IGS-4215-16P4X provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets without air conditioner. Being able to operate under the temperature range from -40 to 75 °C, the IGS-4215-16P4X can be placed in almost any difficult environment.Robust ProtectionThe IGS-4215-16P4X provides contact discharge of ±6KV DC and air discharge of ±8KV DC for Ethernet ESD protection. It also supports ±4KV surge immunity to improve product stability and protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate.Layer 3 IPv4 and IPv6 VLAN Routing for Secure and Flexible ManagementThe IGS-4215-16P4X switch delivers high-performance transmission and advanced Layer 2 and Layer 4 functionalities, along with Layer 3 IPv4 and IPv6 static routing. This capability enables efficient routing between different VLANs and IP addresses, offering a secure, flexible, and straightforward networking solution for diverse applications.Robust Layer 2 FeaturesThe IGS-4215-16P4X can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN, Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), loop and BPDU guard, IGMP snooping, and MLD snooping. With dynamic port link aggregation, the switch enables the creation of a high-speed trunk. For instance, it can combine four 10G ports, creating a resilient 40Gbps connection with fail-over support. Additionally, the inclusion of Link Layer Discovery Protocol (LLDP) enhances Layer 2 functionality by providing essential information about neighboring devices within the local broadcast domain.Efficient Traffic ControlThe IGS-4215-16P4X is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video solutions. The functionality includes broadcast/multicast/unicast storm control, per port bandwidth control, 802.1p/CoS/IP DSCP QoS priority and remarking. It guarantees the best performance in VoIP and video stream transmission, and empowers the enterprises to take full advantage of the limited network resources.Enhancing Network SecurityPLANET IGS-4215-16P4X offers comprehensive IPv4/IPv6 Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. With the protected port function, communication between edge ports can be prevented to guarantee user privacy. Furthermore, port security function allows to limit the number of network devices on a given port. The network administrators can now construct highly-secure corporate networks with considerably less time and effort than before.Ensuring Network IntegrityThe IGS-4215-16P4X also provides DHCP Snooping, IP Source Guard and Dynamic ARP Inspection functions to prevent IP snooping from attack and discard ARP packets with invalid MAC address. Its accuracy, consistency, and reliability of data can be transmitted across a network. Moreover, it ensures that information remains unaltered during transmission and that the network itself is secure from unauthorized access or attacks.User-friendly and Secure ManagementFor efficient management, the IGS-4215-16P4X is equipped with Command line, Web and SNMP management interfaces.With the built-in Web-based management interface, the IGS-4215-16P4X offers an easy-to-use, platform-independent management and configuration facility.For text-based command line management, it can be accessed via Telnet, SSH and the console port.By supporting the standard SNMP protocol, the switch can be managed via any SNMP-based management software.Moreover, the IGS-4215-16P4X offers secure remote management by supporting SSHv2, TLSv1.3 and SNMPv3 connections which encrypt the packet content at each session.Flexible Long-distance Extension SolutionThe emergence of 10G Ethernet marks a significant advancement in Ethernet technology. The IGS-4215-16P4X is a powerful networking device that offers four 10G SFP+ slots capable of supporting three different speeds. These slots can operate at 10GBASE-SR/LR or 100M/1G/2.5GBASE-SX/LX backwards, providing administrators with flexibility in choosing the most suitable SFP/SFP+ transceiver based on the required transmission distance and speed. With ample bandwidth and robust processing capacity, the IGS-4215-16P4X provides an efficient solution for administrators seeking to enhance their network infrastructure.Intelligent SFP Diagnosis MechanismThe IGS-4215-16P4X supports SFP-DDM (Digital Diagnostic Monitor) function that can easily monitor real-time parameters of the SFP for the network administrator, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.Remote Management SolutionPLANET's Universal Network Management System (UNI-NMS) and CloudViewerPro app provide robust support for IT staff in effectively managing and monitoring all network devices, including the IGS-4215-16P4X, from remote locations. Tailored for deployment in both enterprises and industries where the IGS-4215-16P4X is utilized remotely, these systems enable the identification of bugs or faulty conditions without the need for on-site visits. With UNI-NMS or the CloudViewerPro app, businesses of all types can now be swiftly and efficiently managed through a unified platform, streamlining operational oversight.
Tootekood: Festa FS328G(UN)GTIN: 8885020624014Võrguseadmed
The TP-Link Festa FS328G V1 is designed to enhance networking capabilities with its efficient architecture and robust features. With 24 10/100/1000Base-T ports and 4 Gigabit SFP ports, this switch supports an extensive range of devices, facilitating smooth and rapid data transmission. Its support for VLAN and IGMP snooping enriches network segmentation and traffic management, making it suitable for various environments, from small offices to larger organizations. Equipped with 32 MB of flash memory and 256 MB of RAM, the device ensures reliable performance even under heavy usage scenarios. The management protocols, including SNMP and DHCP, allow for easy monitoring and control of network resources. Operating efficiently within a temperature range of 0°C to 40°C and featuring a fanless design, the TP-Link FS328G V1 promotes quieter operation while maintaining optimal performance, even in demanding environments.
8 x 10/100Mbps PoE+ ports200W PoE+ power budgetHardened IP30 rated metal mini switchExtreme operating temperature range of -40° – 75°C (-40° – 167°F)1.6Gbps switching capacityIncludes DIN-Rail mount and wall mount bracketsPower supply sold separately (model: TI-S24052, TI-S24048)NDAA / TAA compliant
• 4 x Gigabit PoE+ ports • 1 x Gigabit port • 90W PoE+ power budget • Hardened IP30 rated metal mini switch • Extreme operating temperature range of -40° – 75°C (-40° – 167°F) • 10Gbps switching capacity • Includes DIN-Rail mount and wall mount brackets • Power supply sold separately (model: TI-S15052, TI-S12048) • NDAA / TAA compliant (U.S. and Canada only)
• Wi-Fi 7 access point with 4x4 MU-MIMO tri-band Wi-Fi – parallel operation in 2.4 GHz, 5 GHz, and 6 GHz for up to 19 Gbps • OFDMA for more efficient Wi-Fi channel utilization • Dedicated scan radio for continuous radio field monitoring • 1x 10 GE and 1x 2.5 GE ports, 2x PoE++ (IEEE 802.3bt) • Dual PoE for seamless failover in the event of a power failure on one port; alternatively configurable load balancing to combine different PoE classes on the two ports • IoT support: Bluetooth Low Energy (5.1) and USB 3.0 • Housing with protection class IP50 and UL-2043 • Innovative design incl. theft-resistant and flexible mounting plate • Automatic wall/ceiling mounting detection • Certified fire resistance and low smoke properties in the event of fire (UL2043) • Power-saving functions with precise consumption measurement • Automated deployment, operation, and optimization via the LANCOM Management Cloud (LMC) • WLAN controller support (including layer 3 tunneling)
