Wireless N300 High-Gain USB Adapter, 802.11b/g/n compatible 2.4GHz, Up to 300Mbps data transfer rate, two integrated antennas, 64/128-bit WEP data encryption, Wi-Fi Protected Access (WPA, WPA2), Wi-Fi Protected Setup (WPS) - PIN & PBC, External WPS button, WiFi Certified, USB 2.0, compatible with Windows XP, Vista, Windows7 or Windows8, Without USB cradle
Comprehensive PoE cable tester for network professionals Three testing modes with convenient dip-switch toggle Troubleshoot PoE issues in real-time For use with IEEE 802.3af/at/bt, and non-standard passive PoE devices PoE inline testing measures voltage, amperage, polarity, and wattage of the connected PD Four digit 7-segment LED display for clear and accurate readings User-friendly design with battery-free operation Compact and lightweight for on-the-go testing TRENDnet's Inline PoE Tester, model TC-NTP1, is a comprehensive PoE cable tester for network professionals. This compact tool accurately tests 4PPoE, PoE+, PoE, and passive PoE technologies. The TC-NTP1 PoE cable tester works on active connections, and is designed to sit inline between the PoE source and PoE device. The PoE cable tester then displays real-time PoE information such as wattage, voltage, and amperage for that connection. Testing Modes The TC-NTP1 has three testing functions: T-mode (for testing ports on your PSE device to determine the PoE switch's or injector's PoE type, and voltage output); N-mode (for non-standard passive PoE devices); and I-mode (for PoE inline testing, displaying voltage, amperage, and wattage of the connected PD). Step Button The convenient step button on the PoE cable tester allows users to cycle through voltage, amperage, and wattage readouts. It also allows users to lock the display to a specific readout (e.g. wattage) for real-time monitoring. Compatibility The PoE cable tester is compatible with IEEE 802.3af/at/bt PoE devices up to 100W, and non-standard passive PoE devices from 11V – 60V. Ports Equipped with 1 x Gigabit port for PSE connection, and 1 x Gigabit port for PD connection Testing Modes The TC-NTP1 supports three testing functions. T-mode allows you to test your PSE device to determine the PoE switch's or injector's supported PoE standards, as well as voltage output. N-mode is used for non-standard passive PoE devices. I-mode is used for PoE inline testing, which displays the voltage, amperage, and wattage of the connected PD Toggle Switch Switch between testing modes using the convenient toggle switch located at the bottom of the PoE cable tester PoE Support PoE cable tester supports IEEE 802.3af/at/bt, and non-standard passive PoE devices Compatibility Compatible with IEEE 802.3af/at/bt PoE devices up to 100W, and non-standard passive PoE devices from 11V – 60V Blue LED Display Convenient front-panel 4-digit seven-segment LED display on the PoE cable tester cycles between voltage, wattage, and amperage readings LED Indicators LED indicators on the PoE cable tester convey PoE type (active/passive), sources, polarity, and power Step Button The convenient step button on the PoE cable tester allows users to cycle through voltage, amperage, and wattage readouts. It also allows users to lock the display to a specific readout (e.g. wattage) for real-time monitoring User-Friendly TC-NTP1 PoE cable tester provides battery-free operation, and is ready for use right out of the box; just plug-in to start testing Compact Design Small and compact design of the PoE cable tester is perfectly pocketable for on-the-go PoE testing
This D-Sub HD (High Density) male connector by Delock is suitable for cable mounting. On the back side there are through holes for inserting crimp contacts. Specification • Connectors: 1 x D-Sub HD 50 pin male (3 rows) 50 x through hole for crimp contacts • Cable gauge: 28 - 20 AWG • Operating temperature: -40 °C ~ 105 °C • Material: metal • Dimensions (LxWxH): ca. 67.0 x 17.5 x 12.5 mm Package content • D-Sub HD 50 pin crimp male
This D-Sub male connector by Delock is suitable for cable mounting. On the back side there are through holes for inserting crimp contacts. Specification • Connectors: 1 x D-Sub 37 pin male (2 rows) 37 x through hole for crimp contacts • Cable gauge: 28 - 20 AWG • Operating temperature: -40 °C ~ 105 °C • Material: metal • Dimensions (LxWxH): ca. 69.3 x 17.5 x 12.5 mm Package content • 2 x D-Sub 37 pin crimp male
This D-Sub male connector by Delock is suitable for cable mounting. On the back side there are through holes for inserting crimp contacts. Specification • Connectors: 1 x D-Sub 9 pin male (2 rows) 9 x through hole for crimp contacts • Cable gauge: 28 - 20 AWG • Operating temperature: -40 °C ~ 105 °C • Material: metal • Dimensions (LxWxH): ca. 30.8 x 17.5 x 12.5 mm Package content • 4 x D-Sub 9 pin crimp male
This D-Sub HD (High Density) female connector by Delock is suitable for solder assembly and can be used for cable assembly. Specification • Connectors: 1 x D-Sub HD 44 pin female (3 rows) 1 x 44 soldering pins • Operating temperature: -40 °C ~ 105 °C • Material: metal • Dimensions (LxWxH): ca. 53.0 x 12.5 x 10.7 mm Package content • 2 x D-Sub HD 44 pin female
This Easy 45 module by Delock is designed to provide a D-Sub male port. The simple snap-in mechanism ensures that the module is firmly in place and can be easily removed if necessary. Easy 45 connects Easy 45 is a variable, modular system that allows components such as sockets, HDMI or USB connections to be added according to your needs. The Easy 45 modules are standardised and can be mounted in various module holder or cable ducts. Easy 45 builds the interface between electrical, network and system installation and many peripheral devices such as TV, monitors, printers, laptops and much more. Specification • Connectors: external: 1 x D-Sub 9 pin male internal: 1 x 10 pin terminal block screw terminal • Material: PC plastic • Suitable for module holder Delock Easy 45 • Suitable for 45 mm cable duct with minimum depth 45 mm • Module size: 22.5 x 45 mm • Dimensions (LxWxH): ca. 22.5 x 45.0 x 32.0 mm • Colour: white System requirements • A free module port Delock Easy 45 Package content • Easy 45 module
This DAB + antenna is designed to receive digital broadcasting DIGITAL RADIO. Specification • Connector: 1 x F plug • Frequency range: 174 - 240 MHz • Gain: 0 dBi • Impedance: 50 Ohm • VSWR: 2.0 • Operating temperature: -30 °C ~ 70 °C • Colour: black • Cable type: RG-174 • Cable attenuation: 1,8 dB @ 1.8 GHz per meter • Cable diameter: ca. 2.7 mm • Cable length incl. connector: ca. 2 m • Antenna length including magnetic base: ca. 33.2 cm • Diameter magnetic base: ca. 5.0 cm System requirements • DAB+ receiver with F connector Package content • DAB+ antenna
The certified LogiLink CAT 6a patch cable is ideal for data transfers up to 10 Gigabit Ethernet and transfer frequencies up to 500 MHz. The jacket is halogen-free and flame retardant, the copper wires are shielded in pairs and the overall shield is made of copper braid. The shielded RJ-45 plugs come with an overmolded slim strain relief and snagless design.
