QuMax for Teltonika RUT240/230 Integrated outdoor multi band high power LTE directional antenna + outdoor Wi-Fi omni antenna + place to install Teltonika RUT240 or 230 (All-in-one) QuMAX offers the most powerful directional LTE antenna of all QuWireless antennas. It is dedicated to connections with long distance to base station. It is designed to have Teltonika RUT240 or RUT230 router installed inside IP67 enclosure. It is the first choice for fixed installations in industrial environment. It also has embedded outdoor Wi-Fi omni antennas. NOTE: For RUT230 one LTE antenna is unplugged. All antennas and Teltonika router integrated in one enclosure Outdoor antenna works in any weather conditions, IP67 Antenna perfectly matched with the router Passive PoE support
Features: High quality imaging with 4 MP resolution Excellent low-light performance with powered-by-DarkFighter technology Clear imaging against strong backlight due to 120 dB true WDR technology Efficient H.265+ compression technology Focus on human and vehicle targets classification based on deep learning Water and dust resistant (IP67)
Powerful Layer 3 Routing Solution for All Long-Reach Networks PLANET SGS-6341-16S8C4XR is a Layer 3 Stackable Managed Gigabit Switch that provides high-density performance, Layer 3 static routing, RIP (Routing Information Protocol) and OSPF (Open Shortest Path First) with 10Gbps uplink and multiple SFP fiber interfaces delivered in a rugged, strong case. The administrator can flexibly choose the suitable SFP/SFP+ transceiver according to the transmission distance or the transmission speed required to extend the 10G network efficiently. Besides, with 128Gbps switching fabric, the SGS-6341-16S8C4XR can handle extremely large amounts of data in a secure topology linking to backbone or high capacity servers for ISP and enterprise VoIP, video streaming, and multicast applications. High Performance 10Gbps Ethernet Capacity The four SFP+ slots built in the SGS-6341 series supports Dual-speed, 10GBASE-SR/LR or 1000BASE-SX/LX. With 10Gbps uplink interfaces the SGS-6341 series boasts a high-performance switch architecture that is capable of providing non-blocking switch fabric and wire-speed throughput as high as 128Gbps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands. AC and DC Redundant Power to Ensure Continuous Operation The SGS-6341-16S8C4XR is equipped with one 100~240V AC power supply unit and one additional 36-75V DC power supply unit for redundant power supply. A redundant power system is also provided to enhance the reliability with either AC or DC power supply unit. The redundant power system is specifically designed to handle the demands of high-tech facilities requiring the highest power integrity. Central IP Stacking Management The SGS-6341 series supports IP stacking function that helps network managers to easily configure up to 24 switches in the same series via one single IP address instead of connecting and setting each unit one by one. The IP Stacking technology groups PLANET SGS-6341 switch series together to enable centralized management through a single unit, regardless of physical location or switch type, as long as they are connected to the same local network. High Reliability Hardware Stacking Two of the 10G SFP+ ports are used to connect several SGS-6341 series build a virtually logical facility. The SGS-6341 series to gives the enterprises, service providers and telecoms flexible control over port density, uplinks and switch stack performance. The SGS-6341 series can connect as a ring for redundancy and ensures that data integrity is retained even if one switch in the stack fails. You can even hot-swap switches without disrupting the network, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands. Redundant Ring, Fast Recovery for Critical Network Applications The SGS-6341 Series supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology and Spanning Tree Protocol (802.1s MSTP) into customer’s network to enhance system reliability and uptime in harsh environments. In a certain simple Ring network, the recovery time could be less than 50ms to quickly bring the network back to normal operation. Layer 3 Routing Support The SGS-6341 series enables the administrator to conveniently boost network efficiency by configuring Layer 3 static routing manually, and the RIP or OSPF settings automatically. The RIP can employ the hop count as a routing metric and prevent routing loops by implementing a limit on the number of hops allowed in a path from the source to a destination. The OSPF is an interior dynamic routing protocol for autonomous system based on link state. The protocol creates a database for link state by exchanging link states among Layer3 switches, and then uses the Shortest Path First algorithm to generate a route table based on that database. Strong Multicast The SGS-6341 series supports abundant multicast features. In Layer 2, it features IPv4 IGMPv1/v2/v3 snooping and IPv6 MLD v1/v2 snooping. In Layer 3 multicast protocols, it features IGMPv1/v2/v3 and DVMRP. With Multicast VLAN Register (MVR), multicast receiver/sender control and illegal multicast source detect functions which make the SGS-6341 series great for any robust networking. Full IPv6 Support The SGS-6341 series provides IPv6 management and enterprise-level secure features such as SSH, ACL, WRR and RADIUS authentication. It thus helps the enterprises to step in the IPv6 era with the lowest investment. In addition, you don’t need to replace the network facilities when the IPv6 FTTx edge network is built. Robust Layer 2 Features The SGS-6341 series can be programmed for basic switch management functions such as port speed configuration, port aggregation, VLAN, Multiple Spanning Tree Protocol, WRR, bandwidth control and IGMP snooping. This switch provides 802.1Q tagged VLAN, Q-in-Q, voice VLAN and GVRP Protocol functions. By supporting port aggregation, the SGS-6341 series allows the operation of a high-speed trunk combined with multiple ports. It enables up to 128 groups for trunking with a maximum of 8 ports for each group. Excellent Layer 2 to Layer 4 Traffic Control The SGS-6341 series is loaded with powerful traffic management and WRR features to enhance services offered by telecoms. The WRR functionalities include wire-speed Layer 4 traffic classifiers and bandwidth limitation which are particularly useful for multi-tenant unit, multi-business unit, Telco, or network service applications. It also empowers the enterprises to take full advantage of the limited network resources and guarantees the best in VoIP and video conferencing transmission. Powerful Security The SGS-6341 series supports ACL policies comprehensively. The traffic can be classified by source/destination IP addresses, source/destination MAC addresses, IP protocols, TCP/UDP, IP precedence, time ranges and ToS. Moreover, various policies can be conducted to forward the traffic. The SGS-6341 series also provides IEEE 802.1x port based access authentication, which can be deployed with RADIUS, to ensure the port level security and block illegal users. Efficient and Secure Management For efficient management, the SGS-6341 Managed Gigabit Switch series is equipped with console, Web and SNMP management interfaces. With its built-in Web-based management interface, the SGS-6341 series offers an easy-to-use, platform-independent management and configuration facility. The SGS-6341 series supports standard Simple Network Management Protocol (SNMP) and can be managed via any standard-based management software. For reducing product learning time, the SGS-6341 series offers Cisco-like command via Telnet or console port and customer doesn’t need to learn new command from these switches. Moreover, the SGS-6341 series offers secure remote management by supporting SSH connection which encrypts the packet content at each session. Intelligent SFP Diagnosis Mechanism The SGS-6341-16S8C4XR supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP and SFP+ transceivers, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. High Availability Mesh Networking Solution for Big Data System By means of improving the technology of Optical Fiber Ethernet with highly-flexible, highly-extendable and easy-to-install features, the SGS-6341-16S8C4XR offers up to 128Gbps data exchange speed via Optical Fiber interface and the transmission distance can be extended to 120km. The SGS-6341-16S8C4XR features strong, rapid, self-recovery capability to prevent interruptions and external intrusions. It incorporates IEEE 802.1s MSTP (Multiple Spanning Tree Protocol, spanning tree by VLAN) into customer’s automation network to enhance system reliability and uptime. The SGS-6341-16S8C4XR is the ideal solution for data centers, service providers and telecoms to build redundant connection and establish high bandwidth for Big Data server farm. Excellent Solution to Core/Data Center Security and QoS Switch The SGS-6341-16S8C4XR performs 128 Gigabits per second non-blocking switch fabric so it can easily provide a local 10Gbps high bandwidth Ethernet network for the backbone of your department. With the four built-in SFP+ ports, the SGS-6341-16S8C4XR provides the uplink to the backbone network through the 10G Ethernet LR/SR SFP+ modules. It further improves the network efficiency and protects the network clients by offering the security and QoS features. Layer 3 VLAN Routing With the built-in robust Layer 3 traffic routing protocols, the SGS-6341-16S8C4XR ensures reliable routing between VLANs and network segments. The routing protocols can be applied via VLAN interface. The SGS-6341-16S8C4XR is certainly a cost-effective and ideal solution for enterprises. Physical Ports 24 100/1000BASE-X mini-GBIC/SFP slots Eight 10/100/1000BASE-T RJ45 copper ports, shared with Port-1 to Port-8 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP RJ45 to DB9 console interface for switch basic management and setup 1 USB2.0 interface for configuration and firmware storage Stacking Features IP Stacking - Connects with stack member via Gigabit TP, SFP and 10G SFP+ interfaces - Single IP address management, supporting up to 24 IP units stacked together Hardware Stacking - Virtualized multiple SGS-6341 series switches into one logical device - Connects with stack member via assigned 10G SFP+ interfaces - Single IP address stack management, supporting up to 4 hardware units stacked together - Stacking architecture supports redundancy Ring mode IP Routing Features IP routing protocol supports RIPv1/v2, RIPng, OSPFv2/v3, BGP4/4+ Routing interface provides per VLAN routing mode VRRPv1/v3 protocol for redundant routing deployment Supports route redistribution Supports hardware-based wire-speed VLAN routing Multicast Routing Features Supports PIM-DM (Protocol Independent Multicast – Dense Mode) and PIM-SM (Protocol Independent Multicast – Sparse Mode) and PIM-SSM (Protocol Independent Multicast – Source Specific Multicast) Supports DVMRP (Distance Vector Multicast Routing Protocol) Supports IGMP v1/v2/v3 and MLD v1/v2 Layer 2 Features Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit Ethernet standard Supports auto-negotiation and half-duplex/full-duplex modes for all 10BASE-T, 100BASE-TX and 1000BASE-T ports Auto-MDI/MDI-X detection on each RJ45 port Prevents packet loss flow control - IEEE 802.3x pause frame flow control in full-duplex mode - Back pressure flow control in half-duplex mode High performance Store-and-Forward architecture, broadcast storm control, port loopback detect 16K MAC address table, automatic source address learning and aging Supports VLAN - IEEE 802.1Q tag-based VLAN - GVRP for dynamic VLAN management - Up to 4K VLANs groups, out of 4041 VLAN IDs - Provider Bridging (VLAN Q-in-Q, IEEE 802.1ad) supported - Private VLAN Edge (PVE) supported - GVRP protocol for Management VLAN - Protocol-based VLAN - MAC-based VLAN - IP subnet VLAN Supports Link Aggregation - Maximum 128 trunk groups, up to 8 ports per trunk group - IEEE 802.3ad LACP (Link Aggregation Control Protocol) - Cisco ether-channel (static trunk) Supports Spanning Tree Protocol - STP, IEEE 802.1D (Classic Spanning Tree Protocol) - RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol) - MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol, spanning tree by VLAN) - Supports BPDU & root guard Port mirroring to monitor the incoming or outgoing traffic on a particular port (many to many) Provides port mirror (many-to-1) Supports G.8032 ERPS (Ethernet Ring Protection Switching) Quality of Service 8 priority queues on all switch ports Support for strict priority and WRR (Weighted Round Robin) CoS policies Traffic classification - IEEE 802.1p CoS/ToS - IPv4/IPv6 DSCP - Port-based WRR Strict priority and WRR CoS policies Multicast Supports IPv4 IGMP snooping v1, v2 and v3; IPv6 MLD v1 and v2 snooping Querier mode support Supports Multicast VLAN Register (MVR) Security IEEE 802.1x port-based network access authentication MAC-based network access authentication Built-in RADIUS client to cooperate with the RADIUS servers for IPv4 and IPv6 TACACS+ login users access authentication IP-based Access Control List (ACL) MAC-based Access Control List Supports DHCP snooping Supports ARP inspection IP Source Guard prevents IP spoofing attacks Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding Management Management IP for IPv4 and IPv6 Switch Management Interface - Console/Telnet Command Line Interface - Web switch management - SNMP v1, v2c, and v3 switch management - SSH/SSL secure access BOOTP and DHCP for IP address assignment Firmware upload/download via TFTP or HTTP Protocol for IPv4 and IPv6 SNTP (Simple Network Time Protocol) for IPv4 and IPv6 User privilege levels control Syslog server for IPv4 and IPv6 Supports DDM Four RMON groups 1, 2, 3, 9 (history, statistics, alarms and events) Supports sFlow Supports ULDP Supports ULPP (Uplink Protection Protocol) Supports ULSM (Uplink State Monitor protocol) Supports LLDP/LLDP MED Supports DHCP Option82, Option37/38 Supports ping, trace route function for IPv4 and IPv6
This high-quality coaxial cable ensures a reliable connection of components of the radio frequency technology. It is characterised by a very low attenuation.
Seda Delocki DisplayPort-kaablit saab kasutada DisplayPort-liidesega seadmete, nt kuvarite, projektorite või telerite ühendamiseks arvuti või sülearvutiga. Kolmekordselt varjestatud kaabel toetab kuni Ultra HD (4K @ 60 Hz) resolutsiooni ja ühildub allapoole kuni Full-HD 1080p. Spetsifikatsioon - Liitmikud: 1 x DisplayPort 20-pini isane > 1 x DisplayPort 20-pini isane - DisplayPort 1.2 spetsifikatsioon - Pin 20 ei ole ühendatud - Kaabli gabariit: 28 AWG toitejuhe 30 AWG andmeliin - Kaabli läbimõõt: umbes 7,3 mm - Vaskjuht - Kolmekordselt varjestatud kaabel - Kullatud pistikud - Audio- ja videosignaalide edastamine - Andmeedastuskiirus kuni 21,6 Gb/s - Resolutsioon kuni 3840 x 2160 @ 60 Hz (sõltuvalt süsteemist ja ühendatud seadmest). riistvarast) - Värv: must - Pikkus koos pistikutega: ca 10 m Süsteeminõuded - Vaba DisplayPort-liides Pakendi sisu - DisplayPort kaabel
L3 Gigabit Managed Switches DGS-3130 Series A unified software image with extensive L2 and L3 functions 6 10G ports 6kV surge protection for Gigabit Ethernet ports Optional Power over Ethernet (PoE) with a power budget of up to 740W with RPS D-Link Safeguard Engine Limited Lifetime warranty Greater port density. Extensive layer 3 features. The switches, designed for small and medium-sized companies, are equipped with a unified software image including L2 and L3 layer functions, 10-gigabit ports, are characterized by higher port density thanks to physical stacking. All this enables the DGS-3130 series switches to be used in various environments and topologies, as well as in Metro Ethernet implementations. Highest reliability Advanced L2 and L3 features include port security, Storm Control, Spanning Tree Protocols, IGMP/MLD Snooping, and IPv6 ND. Management options include a browser-based user interface in multiple languages, industry-standard CLI support, multi-image support, and multiple configurations. Six 10 Gigabit ports with physical stacking options for more ports, with built-in G.8032 Ethernet Ring Protection Switching (ERPS) that helps reduce recovery time to 50 ms. A USB 2.0 interface for storing configuration files, boot images, syslog, and support for additional redundant external power supplies on all models ensure maximum uptime. Comprehensive security They include the latest solutions such as Multi-layer, Packet Content Access Control Lists (ACL) and Storm Control. And the D-Link Safeguard Engine, designed to protect against data flooding caused by malicious attacks, maximizes business network uptime. The IP-MAC-Port Binding feature allows you to bind a source IP address to a corresponding MAC address and define a port number to increase user access control. DHCP Snooping allows the switch to learn IP/MAC address pairs by keeping them in the IMPB whitelist, giving you additional control. Easy Access Control Policies They include multiple authentication mechanisms such as 802.1X, Web-based Access Control (WAC), and MAC-based Access Control (MAC) and are used for accurate access control and easy deployment. After authentication, individual policies such as VLAN membership, Quality of Service (QoS), and ACL rules can be assigned to each host. Support for Microsoft NAP allows you to protect network resources from infected computers by enforcing compliance with network protection policies. Comprehensive traffic management A rich set of multi-layer QoS/CoS features always ensures priority for critical network services such as VoIP, video conferencing, IPTV and IP surveillance, and 10-gigabit ports provide adequate bandwidth. Traffic Shaping guarantees throughput for these services even when the network is busy. L2 Multicast support enables the DGS-3130 series switches to support IPTV applications. Host-based IGMP/MLD Snooping enables multiple multicast subscribers over a physical interface, while ISM VLAN enables switches to send multiple streams over multicast VLANs to save bandwidth and provide better backbone protection. ISM VLAN profiles enable easy and quick association and exchange of predefined multicast registration information on the subscriber port. Selective Q-in-Q enables you to be selective over VLAN traffic. PoE+ with a power budget of up to 740W2 The 30PS and 54PS models have a PoE power budget of 370W. After connecting additional power supplies, they can use 740W.
