CRS354-48G-4S+2Q+RM Best price and best performance on the market – this 48 port switch will rock any setup, including 40 Gbps devices!If you are looking for a single switch that will put your network setup ahead of the curve without costing a fortune, look no further. The new CRS354-48G-4S+2Q+RM is an effective and adaptable rackmount solution for managing networks in demanding and busy environments. With this product Mikrotik aim to set a new price-performance bar – get more features while spending way less!High-end performance for the masses: more 10G ports and even 40G ports, because speed matters.The 48 port champion you’ve been waiting for– the bargain of the decade!This powerful switch has 48 x 1G RJ45 ports and 4 x 10G SFP+ ports. There are also 2 x 40G QSFP+ ports for extremely fast fiber connections or linking with other 40 Gbps devices.The total non-blocking throughput is 168 Gbps, switching capacity is 336 Gbps and the forwarding rate reaches 235 Mpps.Included parts
CAT5e UTP Patch CableCat 5e Cable is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet technology to 100 meters (328 feet) and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates and work any gigabit speed products. These cables deliver improved performance over standard Cat5 cables.Vention CAT5E UTP Patch Cable is the fully-approved system-standard CAT5E Unshielded Twisted Pair (UTP) cable. CAT5E is completely backward-compatible with current CAT5 equipment. Vention CAT5E cables are composed of 4 pairs 26 AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard. Used to connect your network card to any of the following: 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cables have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.
CAT7 Flat Extension Patch CableCategory 7/Class F (ISO/IEC 11801) cable specifications require transmission frequencies of up to 600 MHz over 100 meters of fully shielded copper cabling. CAT7 cable consists of four individually shielded pairs inside an overall braided shield also known as Shielded Twisted Pair Cable (SSTP) or S/FTP (Shielded Foil Twisted Pair). CAT7 features even more stringent specifications for crosstalk and system noise than CAT6 and is designed specifically for Gigabit Ethernet applications (Gigabit over copper).Vention CAT7 Flat Network Extension Cables exceed the current ISO/IEC specifications and represent the next generation in Ethernet over copper. Network Extension Cable are excellent for extending of your LAN connection to your HDTV Blu Ray Player Home Theater XBox 360 PS3 etc. Used for network adapters hubs switches routers DSL/Cable modems patch panels and other twisted-pair applications.Used to connect your network device to any of the following: 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Backwards compatible with CAT5 CAT5e CAT6 and CAT6a equipment.Extension Cables have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Complies with TIA/EIA 568B standard.Virtually eliminates alien crosstalk and interference.Performance rated beyond 600 MHz.
Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-802S40, GT-806S60, GT-805A and GT-806A/B media converters support conversion between 10/100/1000BASE-T and 1000BASE-SX/LX networks. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively. Distance Extension with High Performance and Steady Network Communications PLANET GT-80x gigabit media converter series extends communication distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000BASE-T and 1000BASE-SX/LX interfaces for various fiber optic applications. The available fiber interfaces are shown below: Optic Mode Connector Type Distance Multi-mode Duplex LC/SC 220m/550m/2km Single mode Duplex LC/SC 20/40/60/80/120km Single mode WDM Simplex LC/SC 20/40/60/80km Enhanced Smart Management Features The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Passthrough function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the network. The DIP switch can disable or enable the LFP function. LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter’s fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the network. Easy Installation The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R/MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T and IEEE 802.3z 1000BASE-LX/SX, the Gigabit media conversion installation is quite quick and easy with its Plug and Play feature. The GT-80x also supports flow control and back pressure in half-duplex mode to eliminate packet loss. Fiber-optic Networking for ISPs, Enterprises, and homes With high performance of data transmission and easy installation, the GT-80x can build the ISP network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for ISPs and FTTBs (Fiber to the Building) for small enterprise network environment.
Delocki PCI Expressi kaart laiendab arvutit nelja välise USB 3.2 Gen 1 pordiga. Ühendada saab erinevaid USB-seadmeid nagu dokkimisjaamad, kaardilugeja, väline korpus jne. Tänu USB-portide vertikaalsuunale on võimalik paigaldada madala profiiliga pessa.
ASUS USB-AX56. Ühenduvustehnoloogia: Juhtmevaba, Hostiliides: USB, Liides: WLAN. Andmete edastamise maksimaalne määr: 1775 Mbit/s, Wi-Fi laineala: Kaks sagedusala (2,4 GHz / 5 GHz). Toide USB kaudu. Toote värv: Must, Kuld
Seda Delocki SFP+ moodulit saab kasutada vaba SFP+ pesaga 10 gigabitise kommutaatori laiendamiseks RJ45-liidesega. Spetsifikatsioon - Ühendused: 1 x SFP+ isane > 1 x RJ45 pesa - Andmeedastuskiirus: Gigabit Ethernet kuni 1 Gbps NBASE-T (eelnõu) kuni 2,5 Gbit/s ja 5 Gbit/s. 10 Gigabit Ethernet kuni 10 Gbit/s - Töötemperatuur: 0 °C ~ 65 °C Süsteeminõuded - Vaba SFP+ pordiga seade Pakendi sisu - SFP+ moodul
Toote nimetus: Alantec WTM17 pinnapealne RJ45 pistik must Toote kirjeldus: Alantec WTM17 pinnapealne RJ45 pistik on oma elegantse musta värviga oluline komponent tõhusate ja usaldusväärsete võrgulahenduste loomiseks. See nii elamu- kui ka ärikeskkondadesse mõeldud pistik pakub mitmekülgsust ja lihtsat paigaldust, mis on ideaalne struktureeritud kaablisüsteemide hooldamiseks. Selle tugev konstruktsioon tagab pikaajalise toimimise ka keerulistes tingimustes. Alantec WTM17 ühildub paljude kaablitüüpidega ja toetab kiiret andmeedastust, mistõttu sobib see ideaalselt tänapäeva interneti- ja võrgurakenduste jaoks. Selle RJ45-pistiku kompaktne, madala profiiliga disain võimaldab seda diskreetselt paigutada, nii et see sobib sujuvalt igasse ruumi, ilma et see kahjustaks funktsionaalsust. Pinnale paigaldatavus lihtsustab paigaldusprotsessi, kuna seda saab kiiresti ja kindlalt seinale või muudele pindadele kinnitada, minimeerides vajadust lisaseadmete järele. Must viimistlus mitte ainult ei lisa keerukust, vaid vähendab ka nähtavust tumedamatel pindadel. Olenemata sellest, kas ehitate uut võrku või uuendate olemasolevat, Alanteci WTM17 pinnale paigaldatav RJ45-pistik on loodud nii jõudluse kui ka esteetilisuse tagamiseks, tagades puhta, korraliku ja tõhusa võrgukeskkonna.
The Gigabit PoE+ Injector, model TPE-115GI, combines electrical power with a Gigabit network connection to produce a Gigabit Power over Ethernet Plus (PoE+) signal. Connect this device to a non-PoE Gigabit switch and then run an Ethernet cable for up to 100 meters (328 ft.) to network PoE+ or PoE devices. The integrated power supply reduces installation clutter.Full Duplex Gigabit speedsConverts a non-PoE Gigabit port to a PoE+ or PoE Gigabit portIntegrated power supplyNetwork distances of up to 100 meters (328 feet)Save on installation and equipment costs
Ubiquiti's UniFi Fibre Patch Cable is a Multi-Mode, LC-LC, OM3 fibre patch cable designed to be used with SFP modules such as Ubiquiti's UFiber modules. Specifications Type: OM3 (Duplex)Mode: Multi-0ModeColour: TurquoiseConnectors: LC-LCCore diameter: 50 micronsCladding diameter: 125 micronsOutside Diameter: 2 mm (each fiber)Length: 1m
The DIGITUS® Fast Ethernet PoE switches are designed for medium to large network systems. The PoE function and the 19" size enable an uncomplicated integration into your network. The switches are a great choice to improve the performance and efficiency of your network.Technical Details24-port 10/100Base-TX with PoE support2-port Combo Gigabit TP/SFP UplinkPoE current output 55V DC, max. 30 W per portPoE power supply mode A, PIN 1/2(+), 3/6(-)Supports non-blocking, non-head-of-line forwardingStore and forward technology for optimized data transferAutomatic speed and half/full duplex recognition/adjustmentAuto MDI/MDI-X function16K MAC addressesIntegrated power supply unitPower supply: 390 wattsMaximum PoE output power: 370 wattsEthernet speed: Fast EthernetNumber of ports: 24PoE Power budget: 370 WPoE standard: IEEE802.3at (PoE+)
Tool-free FTP RJ45 cat.6a keystone socket can be installed in any adapter for keystone connectors with dimensions (height x width) 16,10x14,50mm eg in adapters for 45x45 sockets, electrical equipment frames, modular panels, thanks to which the list of applications is very wide this module. The LAN socket has an IDC connector cover and a 568A / B colored connection sequence designation.
Fiber-to-Ethernet Converter UFiber Active Ethernet allows for easy media conversion from fiber to copper. It supports 1 Gbps fiber uplink speeds and 10/100/1000 Ethernet speeds. UFiber Active Ethernet can be powered with 24V Passive PoE or 802.3af and is compatible with all UFiber SFP Modules (power supply and SFP modules not included). The Convenience of Fiber UFiber Active Ethernet provides fiber connectivity to an RJ45 Ethernet device, which in turn provides 802.3af or 24V passive PoE to UFiber AE. Active Fiber to Customer’s Premises UFiber Active Ethernet provides data over long distances at high speed using fiber. Indoor Installation Use the included bracket to easily mount UFiber Active Ethernet on a wall. Fiber Type Active SFP Module Compatibility SFP or SFP+(All UFiber Modules) SFP Port Speed 1 Gbps PoE Input 24V Passive PoE802.3af PoE RJ45 Port Speed 10/100/1000 Mbps Mounting Wall
We are now offering a Hot Swap -48V DC telecom power supply (product code PW48V-12V150W), available to purchase separately for use with CCR1072. Simply remove one of the current power supplies and replace with the new PW48V-12V150W for -48V installations - simple and easy. You don't even need to turn off the device.
