CRS326-24G-2S+RM SwOS/RouterOS powered 24 port Gigabit Ethernet switch with two SFP+ ports, wire speed connectivity with several new switching features! It has “Dual boot” feature that allows you to choose which operating system you prefer to use, RouterOS or SwOS. If you prefer to have a simplified switch only OS with more switch specific features, use SwOS. If you are used to Winbox and would like the ability to use routing and other Layer 3 features on some ports in your CRS, boot and use RouterOS. You can select the desired operating system from RouterOS, from SwOS or from the RouterBOOT loader settings. It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields. SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules. SwOS Features • Non-blocking Layer 2 switching capacity • 16K host table • IEEE 802.1Q VLAN • Supports up to 4K simultaneous VLANs • Port isolation• Port security • Broadcast storm control • Port mirroring of ingress/egress traffic • Rapid Spanning Tree Protocol • Access Control List • MikroTik neighbor discovery • SNMP v1 • Web-based GUI
airCUBE - airMAX Home Wi-Fi Access PointWith a compact design and integrated 24V PoE passthrough, the airCube™ is a home Wi-Fi access point designed to interoperate with airMAX® CPEs and is available in two models. UNMS SupportUbiquiti Network Management Software simplifies remote network management. Super Antenna Innovative Super Antenna provides wide-area coverage beyond regular Wi-Fi access points. 24V PoE Passthrough The airCube can be powered by and provide power to an airMAX CPE using 24V PoE. Sleek Design The airCube's attractive design means it can be positioned anywhere in the room, improving Wi-Fi performance.
Direct attach cable that supports not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard!Mikrotik is releasing new direct attach cables that support not only SFP 1G and SFP+ 10G but also the 25G SFP28 standard! With the new direct attach cables you get more features for the same price! This is highly cost-effective way to connect two SFP/SFP+/SFP28 devices (for example two units of new CCR2004-1G-12S+2XS) for very short distances within racks and across adjacent racks. They provide a low cost low power and low latency interconnect solution for 25-Gigabit Ethernet Fiber Channel and other industry standards and are direct attached compliant and fully conform to the SFP+ MSA specifications.Two versions are available- XS+DA0001 (1m) and XS+DA0003 (3m)
AX1800 Wireless Dual Band Ceiling Mount Access Point - Ultra-Fast Wi-Fi 6 Speeds: Simultaneous 574 Mbps on 2.4 GHz and 1201 Mbps on 5 GHz totals 1775 Mbps Wi-Fi speeds.† - High-Density Connectivity: 4× increased capacity to connect more devices simultaneously.‡ - Integrated into Omada SDN: Zero-Touch Provisioning (ZTP)§, Centralized Cloud Management, and Intelligent Monitoring. - Centralized Management: Cloud access and Omada app for ultra convenience and easy management. - Seamless Roaming: Even video streams and voice calls are unaffected as users move between locations.? - PoE+ Support: Supports Power over Ethernet (802.3at) for convenient deployment and installation. - Secure Guest Network: Along with multiple authentication options (SMS/Facebook Wi-Fi/ Voucher, etc.) and abundant wireless security technologies. EAP620 HD Type Range Extender, Data transmission speed 1800 Mbps IEEE 802.11a, IEEE 802.11g IEEE 802.11n, IEEE 802.11ac IEEE 802.11ax, 1x10/100/1000M Antenna Type Built-in, Colour White Dimensions 243 × 243 × 64 mm
SG3452XMPP Omada 48-Port Gigabit and 4-Port 10GE SFP+ L2+ Managed Switch with 40-Port PoE+ & 8-Port PoE++ - 4× 10 Gbps SFP+ slots - 8× Gigabit 802.af/at/bt PoE++ ports (Max 90 W PoE budget for each port) - 40× Gigabit 802.3af/at PoE+ ports (Max 30 W budget for each port) - 750 W total PoE budget - Centralized cloud management via the web or the Omada app† - Standalone management via web, CLI, SNMP, and RMON - Static Routing helps route internal traffic for higher efficiency - VLAN, ACL, QoS, IGMP Snooping, OAM, and DDM - ERPS supports rapid protection and recovery in a ring topology - Durable metal casing and rack-mountable design
As demands for connection from networking devices such as IP phones, IP cameras and access points increase, deployment complexity and cost rise as well. For less cable usage and investment, Power over Ethernet (PoE) technology provides both data connection and electrical power to devices through just one cable without power-socket restriction. Featured with the benefits of PoE technology, Zyxel's PoE Injectors, PoE12-30W, all provide super-fast LAN connectivity with high-power budget; easily connect to PoE devices over Cat 5e or above cable. The PoE12-30W supports PoE+ and PoE++ standards respectively, both ensure interoperability with other standard-based PoE-capable devices.
Managing outdoor wireless network has never been easier: mANTBox ax 15s can provide unparalleled wireless point-to-multipoint connectivity for a vast variety of devices over a distance of 20 kilometers! A potent combination of modern dual-core ARM CPUs, our latest 802.11ax Wi-Fi 6 dual-band radios and powerful built-in sector antennas will take your signal stability, speed, and responsiveness to the next level! There’s a Gigabit Ethernet port with PoE-in and an SFP port with 2.5 Gigabit support for extra fast fiber uplinks. Upgrading your setup to Wi-Fi 6 offers multiple benefits: Speed: we’ve seen up to 40% higher speed in the 5 GHz spectrum and up to 90% higher speed in the 2.4 GHz spectrum. Security: WPA3 encryption and management frame protection prevent all sorts of attacks, like bruteforcing and WPA2 handshakecapture deauthentication attacks Reliability: seamless fast transition (roaming) enables smooth, non-stop signal when you have to switch between access points. Also, Wi-Fi 6 ensures a fair traffic distribution if the connection is shared by a large number of users. Energy efficiency: features like Target Wake Time reduce power consumption in the long run. Better for your wallet and the planet! mANTBox package includes everything you need: a Gigabit PoE injector, a power supply, a hose clamp and a fastening set, and the MikroTik quickMOUNT pro. This advanced wall mount adapter allows turning antenna within 140° both horizontally and vertically. With the quickMOUNT pro it is possible to perfectly set antenna alignment using an integrated graduated scale.
The ASUS ZenWiFi BT10 offers a blend of performance, security, and convenience. This Wi-Fi system supports a wide range of wireless protocols, ensuring broad compatibility with devices and high-speed Internet access. With VPN support, users gain an extra layer of security, making it suitable for both work and leisure activities that require privacy and data protection. Its dual connectivity options cater to all scenarios, providing reliable wired connections and the freedom of wireless access. Designed to fit any space, its desktop form factor allows for easy integration into your home or office environment. Experience seamless Internet with the ASUS ZenWiFi BT10.
The Ubiquiti UniFi Device Bridge Pro is designed to provide robust wireless connectivity in various environments. With an antenna gain level of 19 dBi and support for advanced wireless protocols like IEEE 802.11a/n/ac, this device ensures strong signal transmission over long distances. It has a range of up to 5 km in open space, suitable for applications where network extension is essential.This device is built to withstand extreme conditions, operating in temperatures from -40°C to 60°C and humidity levels between 5% to 95%. The weatherproof, UV-resistant casing protects the internal components, making it a reliable option for outdoor installations. Equipped with Power over Ethernet (PoE) capabilities and efficient performance reaching up to 867 Mbps on the 5 GHz band, the Ubiquiti UniFi Device Bridge Pro is an effective solution for establishing a resilient wireless bridge.
Mesh System | AX3000 NE (3-pack) | 802.11ax | 574+2402 Mbit/s | Ethernet LAN (RJ-45) ports 4 | Mesh Support Yes | MU-MiMO No | No mobile broadband | Antenna type Internal
The Ubiquiti UniFi U7 Pro is a formidable solution in the realm of network devices, offering reliable wireless performance and security. This wireless access point leverages Wi-Fi 6 technology to deliver high-speed Internet access across 2.4 GHz, 5 GHz, and 6 GHz bands, accommodating a broad spectrum of wireless clients. With the capacity to support over 300 devices and 8 BSSIDs, it is perfectly suited for environments with high-density wireless demands.Security is a priority for the Ubiquiti UniFi U7 Pro, featuring robust encryption protocols such as WPA, WPA-Enterprise, WPA-PSK, WPA2, and WPA3 to protect against unauthorized access and ensure safe data transmission. Its durable metal housing and ability to operate in extreme temperatures from -30°C to 60°C make it a reliable choice for any setting, from offices to outdoor spaces. Additionally, the device's support for advanced network management features like 2x2 MIMO technology, Advanced QoS, and VLAN support, further enhances its appeal by offering efficient network optimization and user experience.
TSW210 INDUSTRIAL ETHERNET SWITCH The TSW210 is an Ethernet switch offering a perfect combination of Gigabit Ethernet and SFP. Eight Ethernet ports allow you to quickly and easily connect multiple devices to the network, without the need for further configuration. SFP enables remote devices to be enabled while maintaining high speed and reliability.
Type 3G/4G Modem | Data transmission speed 300 Mbps | Number of antennas 2 | Wireless Frequency Range 2.4 GHz | Wireless Transmit Power 20 dBm | Power supply requirements 12V/1A DC | Dimensions 226.6 x 100x 54.7mm
5-Port 10/100Mbps Desktop Switch with 4-Port PoE TL-SF1005P is a 5 10/100Mbps ports unmanaged switch that requires no configuration and provides 4 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc 5 10/100Mbps RJ45 ports With four PoE ports, transfers data and power on one single cable Working with IEEE 802.3af compliant PDs, expands home and office network Supports PoE Power up to 15.4W for each PoE port Supports PoE Power up to 58W for all PoE ports Requires no configuration and installation
Industrial LTE Cat 1 Gateway Board TRB145 is equipped with RS485 Interface, Digital Inputs/Outputs and micro-USB port. TRB145 compact design makes this Gateway perfect for an application where a sole gadget must be remotely controlled over RS485 interface. TRB145 is engineered to be used in Industrial applications therefore it has a wide range of software features such as SMS control, Firewall, Open VPN, IPsec, RMS and FOTA support.HardwareMobileLTE(Cat1)/3G/2GSIM slotMini SIM (2FF)Antenna connector1 x SMA for LTERS485Full Duplex (4 wires) and Half Duplex (2 wires), baud rate 300-115200Input/Output2 x Digital Input/Output (configurable)CPUARM Cortex-A7 1.2 GHz CPURAM128 MBytes (50 Mbytes available for userspace)Flash512 MBytes (70 Mbytes available for userspace)Input voltage range9 - 30 VDCPower connector4 pin industrial DC power socketOptional power sourcePossibility to power device over 6 pin RS485 connector’s spare terminals.Configuration interfaceVirtual NIC via Micro-USB connectorLED IndicatorsPower, signal, network and data status LEDsSoftwareOperating SystemLinux OS with Yocto SDK (offering high software customisation)NetworkNAT, Static/Dynamic routing, Firewall (port forward, traffic rules, custom rules), OpenVPN, DDNS ( >25 service providers supported)RS485 related servicesModbus, Serial over IP, NTRIPRemote managementRMS Support, FOTA support, SSH, CLI, SMS Utilities (status/configuration)Status watchdogsPing reboot, periodic rebootAdditional featuresInternet connectivity over USB virtual network interfaceMechanical & EnvironmentalOperating temperature-40° C to 75° CStorage temperature-45° C to 80° COperating humidity10% to 90% non-condensingStorage humidity5% to 95% non-condensingDimensions60 mm x 70 mm x 18 mmWeight30 g
TRM250TRM250 is an Industrial Cellular modem with multiple LPWAN connectivity options. It features NB-IoT, LTE Cat-M1 and is backwards compatible with EGPRS (2G). It offers an extremely long lifecycle and is the most flexible option when upgrading the connectivity of existing industrial equipment. TRM250 is equipped with a USB interface, a rugged aluminium housing and is designed for large scale IIoT deployments. The Industrial Cellular Modem TRM250 is a rugged, compact and extremely versatile connectivity device is able to provide cellular capabilities to equipment across IoT and Industrial IoT applications. This futureproof product features both NB-IoT and LTE Cat-M1 LPWAN communication options and is backwards compatible with 2G. This means that you can upgrade your existing infrastructure with a cost-efficient and reliable connectivity device which will adapt to the changing telecommunications environment and will enable you to use the best cellular M2M technologies for many years to come. Easy to deploy, easy to use and even easier to maintain, TRM250 comes with a USB interface for power & communication, drivers supporting all relevant platforms and one SMA connector for an external antenna to obtain better signal coverage.
TRB245Small and durable industrial LTE Cat 4 Gateway equipped with a number of Input/Output Serial Ethernet ports. Number of features makes this Gateway perfect in application where legacy and modern industrial equipment must be integrated in one system.Industrial LTE Cat 4 Gateway TRB245 is equipped with GNSS receiver Ethernet port durable 16 pin connector block. This Gateway board packs all essential features for an industry in one package: secure power connector I/O ports serial communication fast and reliable internet connection. TRB245 can be used to integrate modern and legacy industrial equipment in one solution and with a wide range of software features such as SMS control Firewall open VPN IPSec RMS user can be ensured that data can be reached securely and without compromises.
RUT360 is an updated version of our all-time best-seller RUT240. This compact industrial cellular router offers a possibility to connect to the internet using cellular, Wi-Fi, and wired networks. RUT360 is equipped with two Ethernet interfaces, 802.11 b/g/n WiFi, and 4G LTE Cat 6 cellular module, offering data speeds up to 300 Mbps. Unique programming, remote monitoring, and security features make RUT360 perfect for IoT and M2M applications, where secure and reliable connectivity is a must. Carrier aggregation functionality makes this compact device irreplaceable in areas or applications where cellular data speeds are limited. 4G LTE CAT 6 Cellular speeds up to 300Mbps with Carrier Aggregation WIFI 802.11 b/g/n WiFi COMPACTNESS Small size - easy integration anywhere DURABILITY Rugged aluminium housing SECURITY Firewall and numerous VPN services, including OpenVPN, IPsec, PPTP, L2TP & SSTP RMS Compatible with Teltonika Remote Management System
Netgear GS724TPP SMART switch Switches with essential L2 features for SMB networks NETGEAR Smart Managed Pro switches feature L2 and L2+/Layer 3 Lite features, excellent PoE support and improved performance. They are designed for networks that use different types of multimedia, such as video, audio and data, within a single platform. Switches increase network efficiency, reduce network operating costs and facilitate management. These switches are also a perfect solution for cutting-edge small and medium-sized enterprises that are looking for an optimal combination of functionality, efficiency and quality. Designed for large and small multimedia networks PoE and PoE+ support in every configuration VLAN with automatic voice data handling for fast and reliable VoIP telephony deployment VLAN with automatic video support, which, similarly to voice, allows you to accelerate the implementation of industrial camera infrastructure using the IP protocol Static routing helps redirect internal traffic and use network resources more efficiently IGMP and MLD protocol recognition provides advanced multicast filtering With Netgear you will build a network ready for the challenges of the future High performance with non-blocking architecture, 256 VLANs, 100 shared ACL entries, 32 static routes and 512 multicast groups Comprehensive IPv6, QoS and ACL management ensures investment protection and smooth migration to IPv6 networks PoE+ support on all ports on GS510TLP, GS510TPP, GS418TPP, GS728TPv2, GS728TPPv2, GS752TPv2 and GS752TPP SFP ports provide fiber-optic connectivity, and dedicated SFP ports on many models provide additional connection performance Energy Efficient Ethernet (IEEE 802.3az) support provides greater energy savings for unused ports and short cables Advanced QoS with incoming IPv4/IPv6 filtering (ACL) and prioritization (QoS DiffServ) Dynamic VLAN assignment means convenient authentication and access to the network regardless of location Convenient network deployment VLAN with automatic voice data handling for convenient implementation of VoIP telephony VLAN with automatic video support for convenient deployment of IP cameras The ACL wizard makes it easy to configure and access your network Smart Control Center discovers switches, making it easier to deploy, monitor and update firmware The PoE timer allows you to schedule power switching for PoE devices A smart IT department doesn't have to be big Convenient management within the browser interface or the Smart Control Center tool Standards-based technology ensures that any standard devices can be used on an existing network Duplicate firmware increases reliability and increases network uptime
Discover the reliability and performance of the Ubiquiti UniFi network cable, a vital component for any modern network setup. This CAT 6 patch cable features male RJ-45 connectors on both ends, ensuring a secure and efficient connection between your devices. With compliance to TIA/EIA-568-B.2 standards, it delivers dependable network performance. Additionally, its VW-1 (UL1581) certification attests to its safety and durability, making it an ideal choice for indoor environments. Whether for home or office use, this network cable is designed to meet the demands of your networking needs, providing a stable and high-speed data transmission solution.
The Ubiquiti UniFi Dream Machine Pro Max is designed to meet the networking needs of both small and large-scale networks, combining high-speed connectivity with strong security features. It includes an integrated 8-port switch, dual WAN ports, and supports multiple Ethernet standards for reliable and versatile network connections. With a 5 Gbps IDS/IPS throughput, VPN support, and advanced encryption protocols, your data is well protected. The device is also user-friendly, featuring cloud-managed capabilities for easy configuration and management. Its durable aluminum/steel housing, along with high-capacity storage and memory, ensures reliable performance for any networking task. The Ubiquiti UniFi Dream Machine Pro Max is engineered to provide a secure, efficient, and scalable networking solution for both business and personal use.
