"Tenda Nova Mesh System EX3 (3 tk) on mitmekülgne ja tõhus kodune Wi-Fi lahendus, mis on loodud selleks, et kõrvaldada surnud tsoonid ja tagada sujuv internetilevi kogu kodus. See kolmekomplektiline võrgusüsteem sobib ideaalselt suurematesse ruumidesse või mitmekorruselistesse kodudesse ja tagab, et saate nautida tugevat ja järjepidevat Wi-Fi-signaali igas nurgas. EX3-seadmed töötavad koos, kasutades täiustatud võrgutehnoloogiat, et luua ühtne võrk, mis annab teile ühe Wi-Fi nime (SSID) ja välistab vajaduse vahetada võrku, kui te ruumis ringi liigute. Lihtne seadistamine mugava Tenda rakenduse abil - saate samm-sammult ühendada ja hallata oma võrgu seadeid ükskõik kust. Nutikad võrgu optimeerimisfunktsioonid valivad automaatselt kiireima võimaliku andmeside tee, et vähendada puhverdamist ja viivitusi, mistõttu on see ideaalne video voogedastuseks, võrgumängudeks ja mitme seadme samaaegseks toetamiseks. Lisaks on Tenda Nova Mesh Systemil tugevad turvaprotokollid, mis kaitsevad teie andmeid ja seadmeid häkkimise eest. Seadmete moodne, kuid samas tagasihoidlik disain sulandub sujuvalt teie kodu sisustusse, pakkudes samas võrratut ühenduvust ja usaldusväärsust. Ükskõik, kas töötate kodus, striimite oma lemmiksaateid või domineerite online-mängudes, Tenda Nova Mesh System EX3 on loodud selleks, et pakkuda suure jõudlusega Wi-Fi ühenduvust lihtsuse ja stiiliga.
Tutvustame Natec Bluetooth 5.0 adapterit, Fly, USB - kompaktne ja mitmekülgne lahendus teie seadmete sujuvaks traadita ühendamiseks. See USB Bluetooth-adapter on loodud uusima Bluetooth 5.0 tehnoloogiaga, mis tagab kiirema andmeedastuse, suurema vahemaa ja suurema energiatõhususe võrreldes varasemate versioonidega. Seda saab hõlpsasti ühendada ja kasutada lihtsa USB-liidese kaudu, mistõttu on see mugav valik kõigile, kes soovivad lisada oma laua- või sülearvutile Bluetooth-funktsioone. "Natec Bluetooth 5.0 adapter toetab mitmesuguseid seadmeid, sealhulgas kõrvaklappe, kõlareid, klaviatuure, hiiri ja muud, nii et seda saab hõlpsasti ühendada, et tagada katkematu ühenduvus tootlikkuse ja meelelahutuse suurendamiseks. Elegantne ja kompaktne disain tagab, et see ei sega teisi USB-porti ja sobib ideaalselt kasutamiseks liikvel olles. Tänu Nateci pühendumusele kvaliteedile ja usaldusväärsusele on see Bluetooth-adapter kohustuslik lisavarustus igale tehnoloogiahuvilisele, kes soovib oma seadmeid traadita funktsioonidega täiendada.
The Gembird WNP-UA1300-03 network adapter is designed to provide reliable wireless connectivity for your computer. With support for dual-band Wi-Fi, it connects to both 2.4 GHz and 5 GHz networks, ensuring optimal performance for a variety of online activities. Whether you're streaming videos, gaming online, or transferring large files, this adapter's data transfer rate of up to 1300 Mbps will support your needs.Featuring a USB 3.0 interface, the Gembird WNP-UA1300-03 offers easy Plug-and-Play installation, making it a suitable upgrade for your setup without the need for complex configurations. It is compliant with Wi-Fi standards, including IEEE 802.11ac, b, g, and n, ensuring compatibility with a wide range of devices and routers. Moreover, its compact external form factor and two internal antennas with 2 dBi gain contribute to its sleek design while providing strong and stable Wi-Fi signals.
The Ubiquiti UniFi Flex 2.5G PoE is a switch designed to meet the demands of modern networking environments. With a switching capacity of 60 Gbps and non-blocking throughput, this device ensures reliable performance for various applications. It supports up to 4,000 MAC addresses and 256 VLANs, allowing for extensive network segmentation and management. Features like flow control, port mirroring, Jumbo frames support, and advanced traffic management capabilities such as storm control and rate limiting enhance functionality. The switch operates effectively in a range of conditions, with a temperature tolerance from -20°C to 45°C and humidity levels between 10% and 90% (non-condensing). Its multiple mounting options (desktop, DIN rail, or wall-mounted) provide flexibility in deployment, making it suitable for various installations without compromising performance.
Cloud Smart Switch 326-24G-2S+RM is SwOS powered 24 port Gigabit Ethernet switch with two SFP+ ports in 1U rackmount case that provides wire speed connectivity with several new switching features. It gives you all the basic functionality for a managed switch plus more: allows to manage port-to-port forwarding apply MAC filter configure VLANs mirror traffic apply bandwidth limitation and even adjust some MAC and IP header fields. SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules.
The Ubiquiti UniFi UMR-INDUSTRIAL is designed for reliable performance in extreme environments, making it a choice for industrial applications. With a wide operating temperature range from -40°C to 70°C and the ability to withstand humidity levels of 5 to 95%, this device operates effectively in various conditions. This versatile router supports both wireless and wired connectivity, featuring two WAN ports and internal antennas to ensure optimal signal strength. It adheres to multiple industry standards including IC, FCC, PTCRB, GCF, and ATT, ensuring compatibility and performance reliability in diverse networking scenarios.Equipped with advanced data link protocols, including Gigabit Ethernet and IEEE 802.11b/g/n, the Ubiquiti UniFi router facilitates high-speed data transmission with maximum throughput in the 2.4 GHz band. The external power adapter provides flexible power options, making it adaptable for different setups. Ideal for businesses and environments requiring robust networking solutions, this router stands out for its durability and performance, ensuring seamless connectivity where it is most needed.
The Zyxel XMG-105 switch is designed to meet diverse networking needs with an unmanaged setup that streamlines connections. With a packet buffer size of 1 MB, it ensures efficient data handling. The compact design allows for desktop or wall-mountable placement, making it a versatile choice for any environment.Operating within a temperature range from -20°C to 40°C, the Zyxel XMG-105 performs reliably in various conditions. Its fanless technology minimizes noise, making it suitable for office settings. Moreover, the switch operates effectively in high humidity ranging from 10% to 95%, ensuring connectivity in challenging environments. Features such as auto-uplink providing seamless connectivity and loop detection enhancing network reliability contribute to creating a stable networking experience.
Included Accessories 2x IEC cordsRackmount rear support ears (2/2)Rackmount ears (CRS)K-82 fastening set | Operating temperature range -10°C to 50°C | Product Net Weight 2.8 kg
SWITCH LANBERG ILFE-4P-1GE-1S-90 POE 1XBT 3XAT SFP/ETH DIN UNMANAGMENT FAST ETHERNETLightweight unmanaged industrial switch Lanberg ILFE-4P-1GE-1S-90 Industrial switches are an essential active device in any network structure - from automation and SCADA systems, through cable TV networks, to distributed IoT installations and surveillance. Lanbergs lightweight industrial switch series was designed for demanding working environments: a metal enclosure, passive cooling, and operating parameters that support stable operation across a wide ambient temperature range. The key advantages of this line include high PoE power (PoE+ / PoE++), redundant power input (you can connect 2 power sources), DIN-rail mounting, VLAN and EXTEND functions, automatic MDI/MDI-X, flow control, an intelligent PoE port cut-off function, and MAC auto-learning.In practice, this is a network switch built for distributed infrastructure: industry, street lighting infrastructure, outdoor CCTV monitoring, alarm systems, and both indoor and outdoor deployments where Ethernet data transmission and PoE power for end devices (cameras, recorders, access points, controllers, sensors) matter - often with higher power requirements.NOTE: The device power supply is included in the product set.Industrial switch ILFE-4P-1GE-1S-90 with a rich selection of portsThis switch is equipped with a port set optimized for CCTV/IoT installations: 4 x Fast Ethernet RJ45 PoE ports (10/100 Mb/s): 1× IEEE 802.3bt PoE++ (up to 90 W) + 3× IEEE 802.3af/802.3at PoE+. 1 x 1000BASE-T uplink (Gigabit Ethernet) - for traffic aggregation and connection to the network core / NVR / router. 1 x SFP slot (1000BASE-X) as a fiber uplink - optical parameters depend on the selected SFP module. Lanberg Gigabit Ethernet switches with PoE++ technologyPoE, PoE+ and PoE++ technology makes it possible to deliver both data and power to devices using a single Ethernet cable, without additional electrical infrastructure at the camera or access point. The technology based on 802.3af, 802.3at and 802.3bt standards allows powering peripheral devices with up to 120 W (90 W or 120 W depending on the model). A major benefit of the enhanced PoE standard is also high link quality and fast data transmission (up to 1 Gbps, depending on the model). Thanks to these capabilities, PoE is widely used in extensive surveillance networks. PoE+ and PoE++ enable real-time 4K camera streams while maintaining smooth performance.VLAN and EXTEND functionsVLAN helps with logical traffic separation (e.g., CCTV vs the rest of the network), improving order and limiting unwanted broadcast traffic. EXTEND mode was introduced for deployments where you need to ensure operation over a longer run - at the cost of speed. In practice, EXTEND can extend transmission and PoE powering up to 250 m on a single cable run (extend 250 m) in typical surveillance and distributed infrastructure deployments.An unmanaged switch that knows how to disconnect devicesIf too many devices are connected and the available PoE power reserve is exceeded, the switch will disconnect endpoints starting from the highest-numbered PoE ports down to the lowest until a safe power limit is restored. This makes it easy to plan for power spikes and define which devices are most critical and should stay online first.Intelligent switches with SFP module supportLanbergs lightweight industrial switches support different fiber types thanks to an integrated SFP slot. Optical transmission parameters depend on the selected SFP module. The switch also supports automatic MDI/MDIX, so crossover cables are not required, and it automatically detects and sets link speed and transmission mode.Unmanaged PoE switch with redundant power inputRedundant power input means a dual power feed to the switch (two independent power paths). If one source fails, the device automatically switches to the other - without user intervention. This solution provides higher security and network stability.Easy installation in 19" racks and on a DIN railInstallation is fast and hassle-free thanks to Plug & Play operation. MDI/MDIX auto-detection recognizes the cable type, eliminating the need for crossover wiring and automatically setting link speed and transmission mode. Reliable packet forwarding with CRC checking (store-and-forward) is essential in IP surveillance systems. A major advantage is DIN-rail mounting, which gives flexible installation options both inside RACK cabinets and outside them.Metal enclosure for durability and wide operating temperature rangeA robust metal enclosure improves durability and supports stable continuous operation. The recommended ambient operating range is -25 to 65°C, with 10-90% humidity. While the enclosure is not water- or dust-tight, installed inside an appropriate outdoor/industrial housing it will perform very well in demanding indoor and outdoor environments such as factories, production plants, and industrial halls.
As USB 3.0 devices are getting popular, the demand for extending the distance covered by USB devices is growing notably. ATEN’s UE350A USB 3.0 Extender Cable not only extends the distance for the USB devices up to 5 meters, but also delivers a throughput of up to 5 Gbps when used in conjunction with a USB 3.0 host and device – an astounding increase that is ten times the capability of USB 2.0.In addition to its robust speed and transfer rate, the UE350A also provides a durable, high quality connection that harnesses the full capability of the USB 3.0 standard; at the same time, it is backwards compatible with USB 2.0 and 1.1 to ensure reliable data communication. With UE350A, extending the distance of your USB 3.0 device is quick and easy, making it an ideal addition to your USB system setups.TypeExternal YesPortfrom von: USB 3.0 Socketto auf: USB 3.0 plugLength 5 m
Cloud Smart Switch 326-24G-2S+RM is SwOS powered 24 port Gigabit Ethernet switch with two SFP+ ports in 1U rackmount case that provides wire speed connectivity with several new switching features.It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields. SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules.
The SXTsq Lite5 is a compact and lightweight outdoor wireless device with an integrated antenna. Perfect for point to point links of up to 12 kilometers or as a CPE unit. It is compact, weatherproof and easy to mount. The SXTsq Lite5 retains a 16dBi antenna like the SXT Lite5, our previous model, yet the antenna design has been improved and the physical size has been dramatically reduced - the SXTsq is two times thinner (see photos for comparison). The device can be mounted on horizontal and vertical poles and masts, but for precise alignment, separately available is the QuickMount Pro, which allows to adjust in every angle (see photo and related product). - SXTsq Lite5-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed. - SXTsq Lite5 (International) supports 5150MHz-5875MHz range.Included Parts Wireless specifications5 GHz Transmit power (dBm)Receive SensitivityTransmit power (mW)6MBit/s25-9631654MBit/s20-80100MCS025-96316MCS719-7579
ÜhenduvustehnoloogiaJuhtmega ühendatudSisemineJahHostiliidesPCILiidesEthernetEthernet LAN (RJ-45) pordid1Andmeedastuskiirus (maksimaalne)1000 Mbit/sTäisdupleksJahVõrgustandardidIEEE 802.3,IEEE 802.3ab,IEEE 802.3u,IEEE 802.3xKiibikomplektRealtekEthernet LANJahKaabeldustehnoloogia10/100/1000BaseT(X)Ethernet LAN-i andmeedastuskiirused10,100,1000 Mbit/sWiFiEiToetatud Windowsi operatsioonisüsteemidWindows 7 Home Basic,Windows 7 Home Basic x64,Windows 7 Home Premium,Windows 7 Home Premium x64,Windows 7 Professional,Windows 7 Professional x64,Windows 7 Starter,Windows 7 Starter x64,Windows 7 Ultimate,Windows 7 Ultimate x64,Windows 8,Windows 8 Enterprise,Windows 8 Enterprise x64,Windows 8 Pro,Windows 8 Pro x64,Windows 8 x64,Windows Vista Business,Windows Vista Business x64,Windows Vista Enterprise,Windows Vista Enterprise x64,Windows Vista Home Basic,Windows Vista Home Basic x64,Windows Vista Home Premium,Windows Vista Home Premium x64,Windows Vista Ultimate,Windows Vista Ultimate x64,Windows XP Home,Windows XP Home x64,Windows XP Professional,Windows XP Professional x64Toetatud Maci operatsioonisüsteemidMac OS X 10.0 Cheetah, Mac OS X 10.1 Puma, Mac OS X 10.2 Jaguar, Mac OS X 10.3 Panther, Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain LionToetatud Linuxi operatsioonisüsteemidJahÜhilduvusPCKiirstardi juhendJah
Tootja: Lanberg Tootegrupp: tööriist/tester tööriista tüüp: wire tracer, tester Lisaandmed: Location of the sought wires, Verification ja identification of wires ja their condition, Measurement ja test continuity of wires, Searching ja verification shorted wires, Testing of open circuits või short circuits function, DC level testing function, Finding ja statement of wires function, Automatic ja quick scan function, Earphone function, Volume adjusting function, Spotlight function, toiteplokk Netokaal: 0.42 kg
Power seadme tüüp: Power over Ethernet Power Device Location100-240 V Input sagedus: 50/60 Hz Rated Input Current1.3 A Input Power Ühendusi Quantity: 1Input Power Ühendusi Type: IEC-320 C6 väljund pinge1väljundusvõimsus Ühendusi Type: RJ-45 Package Type1mm Nominal kaal: 0.192 kg Warranty Products Returnable: Jah garantii Term (month)12 month(s) Warranty Validation Criteria: Serial Number Pack kaal Brutto (kg)1Box kaal Brutto (kg): 17.5 kg Packs in Box: 501
The Lanberg NC-1000-01 is a versatile SuperSpeed USB cable that functions as an external network adapter. This compact device, with a length of 15 cm, connects easily using a single RJ-45 connector. Designed to support a range of data link protocols including Gigabit Ethernet, Fast Ethernet, and standard Ethernet, it ensures reliable wired connectivity. The adapter is USB-powered, making it simple to use without needing an external power source, further enhancing its portability. With integrated Wake On LAN (WOL) functionality and support for full duplex and half duplex modes, this network adapter meets various networking needs while providing performance in data transfer.
QNAP TS-432PXU-RP. Toetatud ketaste tüübid: HDD & SSD, Kõvaketta ühenduse tüüp: Jada ATA II, Jada ATA III, Toetatud ketaste suurused: 2.5,3.5". Protsessori perekond: Annapurna Labs, Protsessori tootja: Annapurna Labs, ...
