1m SMA male to SMA male cable, that can be used to connect your LTE card (with ACSMAUFL pigtail) to an external antenna if you are using wAP R kit (there are special openings in the enclosure of the wAP R, designed for these cables).
Performance Breakthrough airMAX® ac products offer improved latency, noise immunity, scalability and significantly increased throughput performance. Innovative Mechanical DesignThe integrated isolator design improves RF isolation to spatially filter out interference, and the metal-plated interior of the rear housing enhances RF shielding.Superior RF IsolationCompare the two near-field plots, and note the superior performance of the integrated RF isolator. Both near-field plots are displayed in watts and use a linear scale.Superior ProcessingUbiquiti's airMAX® engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology.Advanced Software TechnologyUbiquiti’s airMAX® technology is proven in millions of deployments worldwide, exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks.
Tootja: Gembird Tootegrupp: võrguseade plug | coupler | boots Type of plug, coupler: RJ45 (8P8C) Wiring type: CAT5 Lisaandmed: Practical pass-through design for easy crimping, Gold plated 2-fork internal contacts for both solid ja stranded LAN kaablid, sobib conductors of max. 24 AWG värv: Transparency
DINrail PRO is a mounting bracket for LtAP mini series products, designed to fit standard 35 mm × 7.5 mm DIN rails. This bracket will allow to install LtAP mini next to the industrial control equipment like water meters etc., as well as in equipment racks. Mounting bracket is made from metal and comes with a metal ring.* - Mikrotik LtAP mini sold separately!
The Intel® Ethernet Converged Network Adapter X710-DA4 is a 10 Gigabit network card with four SFP+ ports for a PCI Express slot with at least eight lanes. The heart of the Ethernet Converged Network Adapter X710-DA4 is an Intel® X710-AM2 controller, which enables transfer rates of up to 10 GBit/s. Type LAN adapter EAN 5032037063425 Manufacturer no. X710DA4FHBLK PCIe x8 slot SFP+ connections Data transfer rates LAN 10 GBit/s Chipset Intel® XL710-AM1 Weight 193 grams
Sporting a sleek industrial design, the U Fiber WiFi is a robust, high‑performance GPON CPE that features an informational LED display with 4 Ethernet ports and WiFi. Features: High-Performance GPON CPELED diodes for easy diagnosticsUp to 2.4 Gbps Downstream and 1.2 Gbps UpstreamSupports up to 20 km GPON LinksPowerful Layer 2/3 Management FeaturesGPON WAN Port4x RJ45 Gigabit LAN PortSC/APC Fiber Connector802.11n Wi‑Fi Status LEDs The easy-to-read LEDs provide status information: Ethernet connection, signal strength, and power.Versatile Power The 4 Ethernet LAN ports support 10/100/1000 Mbps connections. The UFiber WiFi can be powered using 24V passive PoE on Port 1, or by 24VDC. Designed for Integration Up to 128 UFiber WiFi devices can be connected to a single GPON port. Supporting GPON links of up to 20 km, the UFiber WiFi integrates with the UFiber OLT and third-party OLT devices.
Universal 2in1 crimping tool and cable testerThis professional crimping & testing tool is designed for RJ45 and RJ11 plugs; has a twisted-pair tester built into the cradle's handles to disconnect one part of the tester from the crimper;Prowered by 4xLR44 batteries - not included;Technical data:enables clamping of modular plugs:RJ45 - 8p8cRJ11 - 6p2cRJ12 - 6p6cRJ14 - 6p4cknives for cutting wiresknives for removing external insulation (flat cables)
The DIGITUS Industrial Fast Ethernet Switch is designed for harsh environments where it is exposed to moisture, temperature fluctuations and vibration. With a temperature range of -40°C to 85°C, the Industrial Fast Ethernet Switch can be used under the most adverse conditions. It ensures a constant availability in highly sensitive areas such as transport, production, traffic and safety monitoring. The simple plug and play system allows the Industrial Fast Ethernet Switch to be quickly integrated into the respective environment. With its Fast Ethernet connectivity, the Industrial Fast Ethernet Switch is a flexible, cost-effective solution for the industrial environment.
The DIGITUS Industrial Fast Ethernet Switch is designed for harsh environments where it is exposed to moisture, temperature fluctuations and vibration. With a temperature range of -40°C to 85°C, the Industrial Fast Ethernet Switch can be used under the most adverse conditions. It ensures a constant availability in highly sensitive areas such as transport, production, traffic and safety monitoring. The simple plug and play system allows the Industrial Fast Ethernet Switch to be quickly integrated into the respective environment. With its Fast Ethernet connectivity, the Industrial Fast Ethernet Switch is a flexible, cost-effective solution for the industrial environment.
PatchCord kat.5e FTP 2.0M gray- Patch Category 5e FTP (shielded)- Length: 2m- AWG 26 (8 * 7 * 0.16mm)- Conductor construction: cable 7 * 0.16mm- Color: gray RAL7035- Length meter meter every meter of cable- PVC outer insulation: 5.4mm- HDPE insulation veins: 0.93mm- Work up to 100Mhz- Compatible with ANSI / TIA / EIA-568B standards- Packaging: string bag
Ubiquiti Networks set the bar for the world's first low-cost and efficient broadband Customer Premises Equipment (CPE) with the NanoStation® M. The NanoStation AC and NanoStation AC loco take the same concept to the future with sleek form factors, along with integrated airMAX (MIMO TDMA protocol) technology and dedicated Wi-Fi management. The radio and antenna are combined to create a more efficient and compact CPE. The NanoStation AC and NanoStation AC loco get maximum gain out of the smallest footprint. The low cost, high performance, and small form factor of the NanoStation AC and NanoStation AC loco make them extremely versatile and economical to deploy. Sleek Industrial Design The NanoStation AC and NanoStation AC loco represent the next evolution of the iconic CPE design that revolutionized the Wireless ISP industry. Dual Ethernet Connectivity The NanoStation AC provides a secondary Ethernet port with software-enabled PoE. Use this port to conveniently power an external device, such as a PoE security camera, for seamless IP video integration.Management Wi-Fi Radio Each NanoStation AC model integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.Improved Surge Protection The NanoStation AC and NanoStation AC loco feature enhanced protection against ESD events. Now with airOS®8 airOS®8 provides powerful features, including airMAX® ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.
airFiber 11Breaking free from the congested 5 GHz band, airFiber® 11 is the first modular airFiber radio system purpose-built for the 11 GHz licensed frequency market. Housed in a compact, highly efficient form factor, airFiber 11 delivers amazing wireless gigabit+ performance, low latency, and long range, making it ideal for carrier backhaul, building-to-building enterprise use, or public safety applications.Features: Full duplex Point-to-Point radio 11 GHz frequency operation Up to 1.2+ Gbps throughput Proprietary INVICTUS™ processor Integrates with airFiber® 11 GHz antennas Utilizes distinct Rx and Tx frequencies Accepts PoE or DC power Secure 128-bit AES encryption Power Source Options Support for PoE or DC power gives you the flexibility to power the AF-11 separately from Ethernet traffic. Reversible Duplexers Each duplexer has a low channel and a high channel that can be configured by simply reversing the position of the duplexer. Channel Configuration The airFiber AF-11 can use single (SISO) or bonded (MIMO) channels, depending on your specific licensing requirements. The AF-11 also features different channel widths to suit your deployment needs, and you can independently configure TX and RX channel frequencies
