The dual port QXG-10G2T-X710 is a PCIe Gen 3 (compatible with PCIe Gen 2)10GbE network expansion card with an Intel Ethernet Controller X710 and supports up to five speeds (10G / 5G / 2.5G / 1G / 100M). By using Port Trunking, both ports can be combined to achieve up to 20Gbps transfer speeds for accelerating file sharing and intensive data transfer. With SR-IOV and iSCSI support, the QXG-10G2T-X710 greatly boosts network efficiency and is ideal for I/O-intensive and latency-sensitive virtualization applications and data centers.
A new Concentrator Gateway card for LoRa® technology in mini PCIe form – so you can create customize your own 2.4 GHz IoT projects. It enables 2.4 GHz LoRa® connectivity for any MikroTik product that has a mini PCIe slot with connected USB lines. It supports 4 different RX channels and 1 TX channel.
N300 Wireless Router > Complies with the IEEE 802.11b/g/n standard. The wireless speed reaches up to 300 Mbps for IEEE 802.11n, allowing smooth internet access. > 1 × WAN port and 3 × LAN ports that expand network coverage. > Two external antennas offer a wider signal coverage. > Automaically selects unoccupied channels. > Easily connects to the wireless network by just the press of the WPS buttons N3 Wireless Router, Available bandwidth 300 Mbps IEEE 802.11 b/g, IEEE 802.11n 1 WAN, 3x10/100M WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access DHCP, Antenna Type Omni-Directional Antenna Gain 3 dB, Number of antennas 2 Wireless Frequency Range 2.412 GHz–2.484 GHz, Included Accessories 1 × Power adapter1 × Twisted pair cables1 × User manual1 × Laws and regulations manual Power supply requirements 12 VDC, 0.5 A, Dimensions 172.0 mm × 121.0 mm × 33 mm
GS728TPP Smart Switch NETGEAR Smart Switches offer powerful L2, L2+, PoE, improved performance and usability. They are specially designed for converged networks, in which voice, video and data are transmitted via a single network platform. These switches are optimized for maximum efficiency, operational cost savings and ease of management. The Smart series of switches offers configurations from 8 to 52 ports, both in Fast Ethernet and Gigabit Ethernet options with PoE technology. All switches are supplied with Gigabit SFP ports, which enables the establishment of high-speed fiber optic connections. These switches are ideal for companies looking for the best combination of features, performance and value.
Wired security IP camera with up to 2880 × 1620 px resolution and 100°–110° viewing angle, Lens: 2.8 mm, Frame rate 25 FPS, JetSparrow, microSD, H.265, H.264, WDR, Motion detection, Object detection, Smart IR illumination up to 35 m,Visual verification of Ajax alarms, Microphone, Power supply 12V 1A, PoE Standard 802.3at
Material SECCDimension (W x H x D) 130.4mm x 170mm x 45mmOperating Temperature -40ºC ~60ºCHumidity 0~90% RHLoad Bearing 10.0KgWeight 1KgApplicable Model PFB300S, PFB300W, PFB301W, PFA120, PFA130, PFA131, PFA140, PFB300C, HDC-HFW3200C, IPC-HFW(C)
Tootja: Lanberg Tootegrupp: Installation võrguseade kaabel juhtme tüüp: CAT6 Category: 6 Lisaandmed: LAN kaabel category 6 FTP (shielded) gelled väline. AWG 23 (4x2x0.57mm)., The wires are made of pure copper (CU 100% bare copper). , External PVC insulation pikkus: 305 m värv: hall
Industrial temperature grade (-40°C to +85°C) SFP 1.25G module with Dual LC connector for long distance 80km links. Compatible with all MikroTik products, that have SFP or SFP+ cages.
In-Wall 802.11ac Wave 2 Wi-Fi Access PointThe sleek and elegant UniFi In-Wall HD AP transforms an Ethernet wall connection into a simultaneous, dual-band 802.11ac Wi-Fi Access Point with 4x4 MIMO technology. For high-density environments, such as hotel suites and meeting rooms where there are numerous clients in a relatively small space, we recommend the UniFi IW HD AP. Both Wave 1 and Wave 2 APs offer 28 independent (non-overlapping) channels: three for the 2.4 GHz band and twenty-five for the 5 GHz band, including DFS channels.When you use the 2.4 GHz band in a high-density location, you encounter self-interference and channel saturation. When you use the 5 GHz band, you can deploy smaller cells (coverage areas), so you can support more clients in any cell that deploys more than one AP.With the advantages of MU-MIMO technology and 4x4 spatial streams, the UniFi IW HD AP can support more than triple the number of users than a typical Wave 1 AP.Superior Processing PowerThe UniFi IW HD AP is capable of complex operations (guest control, filtering, and other resource-intensive tasks) that may slow down a lesser-equipped AP.Power over Ethernet (PoE) StandardThe UniFi IW HD AP can be conveniently powered by an 802.3af or 802.at compliant switch. We recommend powering your UniFi devices with a UniFi PoE Switch.Quick and Simple InstallationThe UniFi IW HD AP has a refined industrial design and can be easily installed using the included mounting hardware.
Coming with intelligent mesh Wi-Fi capability and best-in-class parental controls, MR2200ac is designed to keep all devices connected and everyone safe. Experience the award-winning Synology Router Manager (SRM) with an MR2200ac, and add more when you are ready to expand your coverage even further.
Tootja: Lanberg Tootegrupp: Socket component Type of plug's component: moodul adapter Type of ühenduspesa: 1 x RJ45 Lisaandmed: Product spetsifikatsioon:, Category värv: must
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 0.25 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: sinine
Universal 2in1 crimping tool and cable testerThis professional crimping & testing tool is designed for RJ45 and RJ11 plugs; has a twisted-pair tester built into the cradle's handles to disconnect one part of the tester from the crimper;Prowered by 4xLR44 batteries - not included;Technical data:enables clamping of modular plugs:RJ45 - 8p8cRJ11 - 6p2cRJ12 - 6p6cRJ14 - 6p4cknives for cutting wiresknives for removing external insulation (flat cables)
Ubiquiti POE-24-30W-G-WHis a PoE adapter designed to power various Ubiquiti devices. Compatible with most products (check the device specification before determining compatibility): airFiber airMAX EdgeMAX mFi UniFi AP UniFi Video / airVision. Protection Ubiquiti PoE Adapters provide a variety of features to help protect your PoE devices: Surge protection Clamping protection Maximum surge discharge Peak pulse current AC cable with earth ground Electrostatic discharge (ESD) is the leading cause for outdoor device failures. You can effectively protect against ESD damage using a grounded Ubiquiti PoE Adapter, TOUGHCable™, and TOUGHCable Connectors. Ubiquiti PoE Adapter Compatibility with the airGateway™ Specific PoE Adapter models are designed to work with the airGateway. The airGateway is a compact CPE (consumer premises equipment) gateway with built-in Wi-Fi used to connect the subscriber’s local network to the WISP network. The airGateway is available in three models: airGateway Standard model with an internal antenna airGateway Pro Dual-Band Wi-Fi model with an internal antenna airGateway-LR Long-range Wi-Fi model with an external antenna for extended range The airGateway plugs into any of these PoE Adapters: Model Number Compatibility POE-15-12W ✓ POE-24-12W ✓ POE-24-12W-G ✓* POE-24-7W ✓* POE-24-12W-G-WH ✓* * airGateway maximum LAN port speed: 100 Mbps
netFiber 9 is a powerful outdoor switch with SFP SFP+ and Gigabit Ethernet. It features a powerful ARM v7 CPU 256 MB of RAM 4x 10G SFP+ ports and an advanced Marvell switch-chip that can handle even the heaviest loads. The Gigabit Ethernet port is not just for management purposes. It has a direct connection to the switch chip – so you can enjoy full gigabit speed. This port also supports PoE-in so you don’t have to rely on the DC jack for powering in tight hard-to-reach spots. There is a console port followed by five regular SFP ports and four SFP+ ports for that sweet 10 Gbps networking. This means there might be quite a lot of wires for you to organize at some point. That’s why Mikrotik designed the case to have some handy little additional features on the bottom of the case to help you keep everything neat and tidy.The sturdy case provides decent protection in dusty environments with occasional splashes of water. Perfect for outdoors with some light coverage – like a roof overhang or a simple cabinet.There is a massive heatsink on the back that serves two purposes. Not only it provides outstanding heat dissipation it also moves the center of mass towards the side with all the mounting options – keeping the board firm and strong upon installation. The package includes metal hose clamps and screws so you can attach the netFiber to a pole wall or mast right away.netFiber 9 is an amazing tool for anyone working with connections over 100 meters while keeping data loss and ping low. Optic fiber can be a great alternative to copper if you are worried about electromagnetic interference or maybe even tampering and eavesdropping. With 10 ports a powerful CPU and a rugged case netFiber 9 is a real bargain that will make your network management so much easier!
The TP-Link Omada EAP772 V1 is a sophisticated wireless access point technology, crafted to cater to the needs of modern businesses and high-density environments. It supports Wi-Fi standards, including IEEE 802.11ax (Wi-Fi 6) and IEEE 802.11be, along with Bluetooth 5.2, offering a broad range of connectivity options. Capable of supporting a maximum of 24 SSIDs and over 380 connected devices, it is suitable for large-scale deployments.Security is a critical concern for any network, and the TP-Link Omada EAP772 V1 stands out in this aspect. It provides a variety of encryption algorithms, including WPA3-Personal and Enterprise, reinforced by RADIUS and SSID authentication methods. This ensures that your network is secure against external threats and data breaches. Additionally, features like Omada Mesh technology, seamless roaming, and cloud management capabilities make network setup and maintenance efficient and straightforward.The device's performance is noteworthy, with a maximum data rate of 11 Gbps across the 2.4 GHz, 5 GHz, and 6 GHz bands. It is engineered to accommodate the requirements of high-density environments, ensuring smooth and reliable connectivity for every user. With flexible deployment options, including PoE support and a wall/ceiling-mountable form factor, the TP-Link Omada EAP772 V1 is a versatile solution adaptable to various settings and applications.
The TP-Link Omada EAP211-Bridge KIT V1 is a versatile network solution designed to meet the demands of both indoor and outdoor environments. With its rugged, weatherproof design and capability to operate in temperatures ranging from -40 °C to 70 °C, it ensures reliable performance in any setting. This wireless bridge supports a high data transfer rate of up to 867 Mbps on the 5 GHz band, facilitated by 2x2 MU-MIMO and beamforming technology for efficient, focused connectivity. Security is a priority, with multiple encryption algorithms and MAC address authentication to protect your network. Additionally, its cloud-managed feature simplifies setup and management, while advanced functions like Quality of Service (QoS) and VLAN support optimize network performance. Whether you're extending your Wi-Fi to cover large outdoor areas or ensuring robust indoor connectivity, the TP-Link Omada EAP211-Bridge KIT V1 is engineered to deliver.
The Ubiquiti UniFi UACC-CABLE-PATCH-EL-1M-W is a reliable CAT 6 network cable designed for indoor use. This cable supports 2.5 Gigabit Ethernet, ensuring fast and efficient data transmission. The included translucent connector boots are molded for durability, while the PoE++ ready capability allows for seamless power delivery alongside data transmission, making this cable a suitable choice for various networking applications.With compliance to TIA/EIA-568-B.2 and VW-1 (UL1581), the Ubiquiti UniFi cable ensures safe and dependable performance. The Etherlighting technology enhances the overall function, making it suitable for both residential and commercial setups. Experience quality connectivity with this meticulously designed patch cable.
mANT30 is a professional class 5 GHz 30dBi dish antenna, built to the highest industry standards. Built to seamlessly accomodate Mikrotik Basebox series products, but can be used for any pole mounted wireless device due to the adequate length of the included FlexGuide cable.The antenna comes packaged with all necessary accessories and cables.Note: Basebox wireless device pictured for illustrative purposes. It is not included.
he DGS-1008MP features 8 x 10/100/1000BASE-T ports that support the IEEE 802.3at PoE+ protocol. Each of the 8 PoE+ ports can supply up to 30 watts with a total PoE power budget of 140 watts.
mANTBox 2 12s is long range 12dbi 120 degrees integrated Base Station for 2.4 GHz. The mANTBox is based on our new mANT sector antennas, but also has a wireless router built right in. Powered by the RB911 device, the mANTBox comes ready to use with everything included. The device uses a high speed 600 MHz CPU, comes with the Gigabit Ethernet port and has a built in 802.11 b/g/n wireless device with up to 30 dBm output power.
Gross depth (mm): 99 mm Gross height (mm): 104 mm Gross width (mm): 171 mm Packing quantity: 1.00 pc(s) Volume (m3): 0.00 m³ Embeeded battery: No WEEE tax: Yes Other features: with AC Passthrough Paper/Pasteboard: 110 g Plastic (No PET): 3 g Producer product name: RE365 Producer product family: Extender Ethernet LAN (RJ-45) ports: 1 POE: no PoE Wi-Fi band: 802.11ac Antenna type: 2xExternal Ethernet LAN data rates: 10/100/1000 Mbit/s Wi-Fi data rate (max): 300+867 Mbit/s Frequency band: 2.4GHz/5GHz MU-MiMO: No
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 1.5 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
