Archer C6 V4 AC1200 Wireless MU-MIMO Gigabit Router - AC1200 Dual-Band Wi-Fi – 867 Mbps at 5 GHz and 400 Mbps at 2.4 GHz band - MU-MIMO Technology – Simultaneously transfers data to multiple devices for 2× faster performance - Boosted Coverage – Four external antennas equipped with Beamforming technology extend and concentrate the Wi-Fi signals - Access Point Mode –Supports AP Mode to transform your wired connection into the wireless network - Easy Setup – Set up your Wi-Fi in minutes with TP-Link Tether app. Archer C6 V4 Wireless Router, Available bandwidth 1200 Mbps Data transmission speed 867 Mbps, Wi-Fi 5 1 WAN, 4x10/100/1000M WPA - Wi-Fi Protected Access, WPA2 - Wi-Fi Protected Access WPA3, 802.1X (EAP-MD5, EAP-TLS, EAP-TTLS and EAP-PEAP) Antenna Type Omni-Directional, Number of antennas 4 Wireless Frequency Range 2.4 and 5 GHz, Included Accessories Power Adapter;RJ45 Ethernet Cable;Quick Installation Guide Power supply requirements 12 V - 1 A, Dimensions 215 × 117 × 32 mm
Mobiilne 4G-ruuter tööstuslikele IoT-rakendustele, mis toetab jadaliideseid RS232 ja RS485, MQTT, BACnet, I/O-d, Ethernet ja muud. See mobiiliruuter on varustatud GNSSi ja tõrkekindlate funktsioonidega, nagu Dual SIM, automaatne katkestus ja WAN-i varukoopia. ÜHENDUS4G LTE (Cat 4), 3G, 2GDUAL SIMAuto-failover, varu WAN ja rohkem lülitusstsenaariumeLIIDESED JA PROTOKOLLIDSeeriaviisilised liidesed (RS232 ja RS485), MQTT, BACnet, OPC UA, I/O, Ethernet ja palju muud.GNSSNTRIP, asukohateenused ja ajasünkroniseerimine
The DGS-1210 Series Gigabit Smart+ Switches with Fiber Uplinks is the latest generation of D-Link Gigabit Smart+ Switches with Fiber Uplinks featuring D-Link Green 3.0 technology. The series offers a high level of energy saving and efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. IPv6 Ready Logo Program Approved, support for IPv6 management and configurations ensures your network remains protected after the upgrade from IPv4 to IPv6. By offering multiple management options, the Gigabit Smart+ Switches with Fiber Uplinks allows quick deployment, infrastructure expansion, and seamless function upgrades. Built for small and medium-sized businesses, the DGS-1210 Series Gigabit Smart+ Switches with Fiber Uplinks provide functionality, security, and manageability for a fraction of the standard cost of ownership. The DGS-1210 Series Gigabit Smart+ Switches with Fiber Uplinks includes a range of high power budget PoE-enable switches for businesses looking to power VoIP phones, wireless access points or network cameras.
For him, power is not a problem: a simple and functional LANBERG POE+ switch The PoE+ switch is an indispensable active device in any network structure that uses power transmission over structured cabling. The RSGE-24P-2GE-2S-250 is dedicated to all installations: home, business, low-current, monitoring, IP, VoIP, cable TV networks, and in particular finds use in alarm, fire and access control infrastructures. In addition to the primary function of the switch, i.e. handling Ethernet frame traffic between ports, it additionally provides power to each device in the PoE/PoE+ 802.3af and at standards. This makes it possible to supply up to 250 W total power to devices. And all this together with simultaneous data transmission to them. This saves resources, space and the time it would take to install a separate electrical and network installation. This is particularly important if the network is dispersed and its end devices do not have access to a power source, even more so if they are mounted outdoors. No-compromise solution - viable POE budget: 250 W The switch is equipped with a total of 28 ports, including 24 PoE+ (Gigabit Ethernet), 2 Uplink (Gigabit Ethernet) and 2 Uplink (SFP Gigabit) ports. Thoughtful design and attention to component quality provides the user with up to 250 W of total real power for end devices, which means that up to: 16 IEEE 802.3af devices (max. 15 W per port) or, 8 IEEE 802.3at devices (max. 30 W per port), The remaining 4 Uplink ports (2xGigabit Ethernet and 2xSFP Gigabit) operate independently and can operate simultaneously. They are dedicated to the exchange of data traffic between the 24 PoE+ ports and external devices. In the case of monitoring/control systems, this is particularly useful, as it allows the user to rip camera recordings to the DVR while simultaneously sharing the stream further (on the second port), e.g. on the local network or on the Internet. Intelligent POE port disconnection function It is not always entirely clear how a switch will behave when the available PoE budget is exceeded. There are several possibilities: the port that exceeds the budget will be disconnected, or a random port or the most recently connected port will be disconnected. In the last case, what will be their order after a power outage and its restoration when they are all plugged into the switch at the same time? Lanberg has introduced an innovative solution in the RS series switches which, through the simplicity of the operating principle, eliminates any doubt about the mechanics of the ports. When the PoE budget is exceeded (e.g. by a device connected to port 1), the switch will start disconnecting PoE ports starting from the highest numbering until the sum of loads exceeds the available budget; while keeping the operation of the other ports intact. Those that are disconnected will remain in this state until the PoE load decreases. The function is primarily dedicated to demanding applications that emphasize safety and business continuity, where some devices must operate without interruption regardless of the situation. In such cases, Lanberg switches will allow the user to protect sensitive devices by connecting them to the lowest numbered ports. EXTEND mode up to 250 meters Standard switches, in accordance with the standard, provide the ability to operate devices at a distance of up to 100 m on one cable section. However, sometimes, due to the extensive backbone and complex environment, a custom solution that goes beyond the standard is required when developing cabling and networking. In the case of monitoring solutions, this is a fairly common problem, most often resulting from too great a distance between the distribution device and the end device. Lanberg switches have a function that enables data transmission (max. 10 Mbps) and PoE+ power supply up to 250 m on one cable section. Simply switch the button to the PoE+ Extend 250m position on the case to provide extended operation for ports 1 ~ 24. The solution has been introduced for monitoring and IP systems as well as access control, especially if end devices are located outside without the possibility of installing additional network distribution points. 4 kV surge protection The switch itself, as well as the devices connected to it, are repeatedly exposed to various threats, including electric discharges that can flow through both power and network cables. Bearing in mind the safety of devices and their users, Lanberg equipped the switch with an integrated protection system against discharges, guaranteeing 4 kV protection for all ports, effectively reducing their damage due to rapid voltage increase. Under standard conditions, the network will continue to work without interruptions, the switch will continue to work without any interruptions, and the user gains the security of the device and infrastructure. Mounting kit included - ears up to 19" The RS series of switches is characterized not only by the quality of workmanship, ease of use, functionality of the device, but also complementarity in terms of assembly and supplied accessories, where possible. Lanberg has introduced a set of accessories for versatile assembly of its switches. The RSGE-24P-2GE-2S-250 includes mounting ears for cabinets 19 and a set of mounting screws (except M6). This enables a wider application and greater freedom of installation of the RS series switches.
The MikroTik CRS320-8P-8B-4S+RM provides a reliable and efficient solution for network management with its robust design and extensive connectivity options. Featuring 17 ports capable of delivering Power over Ethernet (PoE++) and a strong PoE budget of 963 W, this switch ensures seamless power delivery to connected devices. It includes both 10/100/1000 Base-T connections and 2.5/10 Gbit SFP+ ports, facilitating versatile networking capabilities suitable for diverse environments, whether rack-mounted or desktop configurations.With a processor speed of 800 MHz and 256 MB of DDR3 SDRAM, this switch ensures optimal performance while handling network traffic. The built-in environmental monitoring features, such as voltage and temperature monitors, enhance system reliability, reducing the risk of downtime. With a minimum operating temperature of -10°C and a maximum of 50°C, this device is designed to perform under a variety of conditions, making it a valuable addition to any network infrastructure.
The UniFi Access Reader Lite has been designed for convenient use and secure access. The PoE-powered reader is easy to install and supports the latest NFC security standards, including AES-128 encrypted MIFARE DESFire. Unlocking the door is quick and secure with an NFC card or with mobile app.
i-tec C31NANOLANPD100. Ühenduvustehnoloogia: Juhtmega ühendatud, Hostiliides: USB 3.2 Gen 1 (3.1 Gen 1) Type-C, USB Power Delivery kuni: 100 W. Ethernet LAN-i andmeedastuskiirused: 100,1000 Mbit/s. Toote värv: Hall, Ühilduvad ...
USB Type-C 3-in-1 multi-port adapter (USB port + HDMI + PD), silver - 3-in-1: single USB port, 4K HDMI and USB Type-C PD - Superspeed USB 3.1 Gen 1 (5 Gbps) data transfer via USB port - Plug & Play
Type 3G/4G Modem | Data transmission speed 300 Mbps | Number of antennas 2 | Wireless Frequency Range 2.4 GHz | Wireless Transmit Power 20 dBm | Power supply requirements 12V/1A DC | Dimensions 226.6 x 100x 54.7mm
PoE ports 8 | PoE power budget 60 Watts | Operating temperature range -10 °C ... 55 °C | Dimensions 184.6 x 103.3 x 27.0 mm | Product Net Weight 0.36 kgGarantii: 36 kuud
Type L2 | PoE ports 8 | PoE power budget 110 Watts | Switching capacity 5.6 Gbps | Forwarding rate 4.17 Mpps | Power supply External | Operating temperature range –10 °C to +55 °C | Dimensions 184.6 mm × 103.3 mm × 27 mm | Product Net Weight 0.36 kgGarantii: 36 kuud
Experience 2.5 Gb/s Speeds with Stable, Hassle-Free Connectivity The ASUS USB-C2500 V2 delivers ultra-fast and stable networking at speeds up to 2.5 Gb/s-2.5 times faster than standard gigabit network adapters. Compatible with USB-C and major operating systems, including Windows, macOS, and Linux, its an easy way to upgrade your NAS server, laptop, or desktop for faster and more reliable wired connections. Sleek, Compact Design for Easy Portability The ASUS USB-C2500 V2 is a compact and convenient network accessory for home, work, or travel. Its hand-sized design and built-in 10 cm cable make it easy to carry and use on the go. Whether youre working remotely, streaming media, or transferring data, it provides a reliable, space-saving solution for stable wired connectivity wherever you are. Instant Network Insight with LED Indicators The USB-C2500 V2 features intuitive LED indicators that allow you to easily check the network connection status at a glance. These LEDs provide real-time feedback, helping you quickly identify and troubleshoot network connectivity issues.
The D-Link DBR-X3000-AP serves as a versatile wireless access point designed to enhance network connectivity in various environments. With a data transfer rate of up to 3 Gbps, it supports high-speed wireless communication for both 2.4 GHz and 5 GHz bands. The device accommodates a maximum of 7 configured SSIDs, providing users with the flexibility to customize their network settings for different needs.
Improved Noise ImmunityThe NanoBeam directs RF energy in a tighter beamwidth. With the focus in one direction, the NanoBeam blocks or spatially filters out noise, so noiseimmunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.Innovative Mechanical Design• Built-in mechanical tilt The mounting bracket conveniently offers 20° of uptilt and up to 20° of downtilt.• Quick assembly The number of fasteners was reduced to simplify assembly. Tools are required only when the technician mounts the NanoBeam on the pole.• Easy removal The antenna feed can be detached with the push of a button.Corrosion Resistance• Fasteners GEOMET®-coated for improved corrosion resistance when compared with zinc-plated fasteners.
Tested according to Link Performance Class E, for up to 250 MHz UL certified Housing of steel sheet Shielded RJ45 female sockets, 8P8C 1U Cable installation via LSA strips, colour-coded as per EIA/TIA 568B Fixing option for cable ties, central ground connection.Portide hulk24Pistmik(ud)RJ45Toetatud kaablitüübidCat6Toote värvHallPüstikmontaažJahPüstiku mahutavus1UKaabliühendusLSA
S+31DLC10D is a 10G SFP+ transceiver with a LC connector, 1310nm, for up to 10 kilometer Single Mode fiber connections.Units are tested and compatible with CCR1036-8G-2S+ and CCR1036-8G-2S+EM. Units are compatible with non-MikroTik SFP devices as well.
