Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600MHz and features a snagless design with gold plated contacts for ethernet standards up to 10 GBase-T.The Cat.7 cable material for operating frequencies up to 600MHz with taotal braided shielding and foil single-wire shielding (S/FTP) was developed for use in data centres, server rooms, rack mounting of network and control cabinets etc. for networks up to 10GBaseT. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.This product uses Cat.7 cable material. The Cat.7 standard originally defined the GG45 connectors, which were intended as a further development of RJ45, but were not able to establish themselves on the market. In the meantime, the RJ45 connector developed to easily meet the requirements of Cat.7, but has never been defined for Cat.7. Therefore the imprint on the cable reads as follows: "Cat.6A S/FTP patch cords with 600MHz raw cable".Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.Available colours: Black, Blue, Grey, Red, White.
Twisted Pair Patch Cable with RJ45 connectorsCat.6 F/UTP, CCAIntegrated snagless connector for latch protectionGold plated pins for better conductivity and elimination of signal loss10 year warrantyCat.6 F/UTP CCA network cable with support for bandwidth up to 250MHz and features a snagless design with gold plated contacts for ethernet standards up to 1GBase-T.Cat.6 cable for operating frequencies up to 250Mhz in a shielded version with foil shielding (F/UTP). Cat.6 cables are widespread throughout the professional sector. They are ideal for Gigabit Ethernet or AV extension applications. These cables are manufactured and tested according to the ISO/IEC 11801 specification. The cables are packaged individually in a polybag.The gold-plated contacts ensure reliable, corrosion-free connections over extensive periods of time. A robust snagless strain relief design prevents damage to the connector latch during installation and removal.The high frequencies used in network technology cause a high current load in the outer layers of the conductors due to the "skin effect", while the conductor cores are only subjected to very low electrical loads. This allows the use of copper clad aluminium (CCA) conductor material, making this cable more cost-effective than pure copper cables.Available lengths: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m.
PLANET IP30 8-Port Gigabit Wall-mount Switch with 4-Port 802.3AT POE+ (-10 to 60 C), dual redundant power input on 48-56V DC terminal block and power jack (WGS-804HP)
Tootegrupp: SWITCH - unmanaged LAN võrguseade arhitektuur: GigabitEthernet koos PoE 1000BaseT (RJ45) ports: 8 tk Toetatud protokollid ja standardid: PoE - Power over Ethernet võrgukiht: 2 arvutikorpuse tüüp: metal maksimaalne energiatarbimine: 60 vatti Standard tarvikud: toiteplokk Lisaandmed: väljund pinge värv: must andmeleht: Vendor Page
CAT6A kaabel on muutumas paljude struktureeritud kaabeldusvõrkude valikukaabliks. CAT6A kaabel võimaldab edastada kuni 10 Gbps ja sellest on kiiresti saamas VoIP, CCTV ja andmevõrkude kaabeldustaristu.
QuSpot for Teltonika RUT955 Integrated multi-band LTE omni antenna + WiFi omni antenna + GPS antenna + place to install Teltonika RUT955 (All-in-one) QuSpot omni LTE antenna for Teltonika RUT955 router is a perfect outdoor device for mobile and fixed installations like industrial, CCTV, hotspots, yachts, boats, campers, RV etc. It has embedded also omni Wi-Fi and GPS antenna. If you use RUT955 with QuSpot antenna, you get an integrated complete solution with embedded router and multi band antennas in one enclosure. All antennas and Teltonika router integrated in one enclosure Outdoor antenna works in any weather conditions, IP67 Antenna perfectly matched with the router Passive PoE support Easy to install Dual SIM – significantly reduce roaming costs
CAT7 SSTP Patch CableCategory 7/Class F (ISO/IEC 11801) cable specifications require transmission frequencies of up to 600 MHz over 100 meters of fully shielded copper cabling. CAT7 cable consists of four individually shielded pairs inside an overall braided shield also known as Shielded Twisted Pair Cable (SSTP) or S/FTP (Shielded Foil Twisted Pair). CAT7 features even more stringent specifications for crosstalk and system noise than CAT6 and is designed specifically for Gigabit Ethernet applications (Gigabit over copper).Vention CAT7 cables exceed the current ISO/IEC specifications and represent the next generation in Ethernet over copper.Used to connect your network device to any of the following: 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Backwards compatible with CAT5 CAT5e CAT6 and CAT6a equipment.Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel. Complies with TIA/EIA 568B standard.Virtually eliminates alien crosstalk and interference.Performance rated beyond 600 MHz.
Set of two separate eXtra Range LTE directional antennas for bi-directional connection to two different LTE base stations. The main antenna has integrated also dualband Wi-Fi GPS Bluetooth antennas and space to install Teltonika RUTX12. The second antenna is only directional LTE XR antenna.The QuMax XR2 a is bi-directional LTE eXtra Range antenna set (two separate antenna) two connect to two different LTE base station (it can also be connected to one base station in order to obtain a greater share of the transfer from that base station). The main antenna additionally has built-in Wi-Fi dual band GPS and Bluetooth antennas 2x Nf connectors for the second LTE antenna and a space to install the RUTX12 router inside antenna enclosure. The second antenna is LTE Extra Range directional antenna only and is in smaller enclosure. The QuMax XR2 set is dedicated to long-range connections from the LTE base station also to two different base stations which gives optimal use of functions such as load balancing and carrier aggregation.
TwistPortTM Adaptor converts 3rd party radio interface into RF elements® male TwistPortTM interface. The radio installation is seamless and requires no tools. The adaptor makes the 3rd party radios compatible with every TwistPortTM antenna with superior performance noise immunity and network scalability.For Mimosa A5xTwistPortTM Adaptor for A5x is compatible with Mimosa A5x radio with a pair of RP-SMA connectors.Market Leading PerformanceThe frequency band of TwistPortTM Adaptors operation is ultra-wide: 5180 - 6400 MHz. Thanks to the extremely low loss of waveguide the maximum power is delivered from the radio to the antenna.
