AXAGON PCEE-GRF PCI-Express network card adds high speed Gigabit Ethernet connection to your desktop computer. It enables a transmission speed of 10/100/1000 Mbit/s. The network card is equipped with proven Realtek 8111 chipset. It ensures seamless compatibility with most operating systems. Gigabit network card connects the computer to the Internet or a computer network, adds the missing RJ-45 connector, add another network card or replaces the original defunct network connection. In addition to an adapter with a standard size bracket, the package also includes a low profile bracket which allows the mounting into low profile cases. Input: PCI-Express 1.1 interface, PCI-Express 1.0a / 2.0 / 2.1 / 3.0 compatible. Number of lines 1-Lane (x1), compatible with x1 / x4 / x8 / x16 PCIe slots. A bandwidth of 1-Lane PCI-Express 1.1 bus 2.5 Gb/s. Output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. Other features: Full Plug and Play support. 10/100/1000 Mbit/s auto-detection. Supports Microsoft NDIS5, NDIS6 Checksum Offload (IPv4, IPv6, TCP, UDP) to reduce processor load. Supports Segmentation Task-offload (Large send v1 a Large send v2). Supports full-duplex transmission s IEEE 802.3x flow control. Supports IEEE 802.1P Layer 2 priority encoding. Supports IEEE 802.1Q VLAN tagging. Supports IEEE 802.3az-2010 (EEE) Energy Efficient Ethernet - reduce power consumption at standby. Supports Auto MDI/MDIX - crossover detection and auto-correction eliminate the need for crossover cables. Supports hardware ECC (Error Correction Code), CRC (Cyclic Redundancy Check) function. Supports Pair Swap/Polarity/Skew Correction. Two LEDs for indicating network activity and connection. The Realtek RTL8111E/F chipset is used. Wake-on-LAN support in various modes: Supports sleep mode and remote wake up via AMD Magic packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection and also Link Change wake-up. Supports ECMA-393 proxZzzy standard for sleeping hosts to manage the network connection of sleeping guests using proxy servers. Advanced Power Management features:The network card supports advanced power management to reduce losses during standby. It also supports advanced power saving when the Ethernet cable has been disconnected. Supports Advanced Configuration Power management Interface (ACPI). Supports Power Management offload (ARP & NS). Supports PCI MSI (Message Signaled Interrupt) and MSI-X. Supported operating systems:MS Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit versions of OS Windows), MS DOS, MacOS X 10.4.x and higher, Linux kernel 2.4.x / 2.6.x / 3.x / 4.x, FreeBSD 7.x / 8.0 / 9.0, SCO Unix 5.0.6 / 5.0.7, SCO OpenServer 6, UnixWare 7.1.x, Novell server OS 5.x / 6.x, Novell client for DOS (ODI driver). Package contains: PCI-Express Gigabit Ethernet card with a standard bracket, low profile bracket, multilanguage quick guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box.
Ubiquiti PoE POE-24-12W, 24VDC @ 0.5A, Fast Ethernet Accessory Name POE 24V - 12W Package Type Retail Warranty Products Returnable Yes Warranty Term (month) 12 month(s) Warranty Validation Criteria Serial Number Pieces in pack 1 Packs in Box 1
Tootja koduleht: gembird.com/products.aspx?key=NIC-MU2-01 Brutokaal: 0.03 kg Netokaal: 0.03 kg Saadetise kogus pakendis: 1 Product Type: Adapter Pakendi maht: 0.000828 cubm mõõtmed: 200 x 22.5 x 16 mm Saadetise pakendi laius: 11.5 cm Saadetise pakendi sügavus: 16 cm Saadetise pakendi kõrgus: 4.5 cm Saadetise pakendi kaal: 0.03 kg
Tootja: Lanberg Tootegrupp: Socket component Type of plug's component: moodul adapter Type of ühenduspesa: 1 x RJ45 Lisaandmed: ühenduspesa:, external värv: valge
Ubiquiti Recessed ceiling mount accessory for the UVC-G3-FLEX camera. Mount your camera inside the ceiling or a ceiling tile for a clean, low-profile installation. Includes mounting hardware for drywall, solid surface, or ceiling tile installation. Optional security screw locks the camera to the mount from above for added security. 3-Pack* - UVC-G3-Flex camera is shown for demonstration purposes only and sold separately!
FlexHD-CM-3Ceiling Mount for UniFi FlexHDRecessed ceiling mount accessory for the UniFi FLEX HD access point. Mount the UAP-FlexHD to a drop ceiling tile, drywall ceiling or solid ceiling for discreet, low profile appearance. Sliding retainer with locking threads and a snap-in mechanism for the UAP-FlexHD make mounting simple. Magnetic face place hides the bracket for a stylish finish.Features: Low profile (2”, 51mm), discreet ceiling installation Guided snap-in locking mechanism for UAP-FlexHD Adjustable, sliding retainer for mounting without screws Magnetic 3 1/3” inch (85 mm) face plate Requires 2 1/8” inch (54 mm) cutout Includes drywall mounting hardware and anchors
Processor: Qualcomm CPU Interface: 2 Gigabit Ethernet Ports (WAN/LAN auto-sensing) per Deco unit Button: 1 Reset button on the underside External Power Supply: Power Cord Dimensions: 7.5 in. x 3.6 in. x 3.6 in. (190 mm x 90.7 mm x 90.7 mm) Antenna Type: 2 internal dual-band antennas per Deco unit Wireless Standards: IEEE 802.11 ac/n/a 5 GHz, IEEE 802.11 b/g/n 2.4 GHz Frequency: 2.4 GHz and 5 GHz Signal Rate: 300 Mbps on 2.4 GHz, 867 Mbps on 5 GHz Wireless Security: WPA-PSK/WPA2-PSK
CAT7 SSTP Patch CableCategory 7/Class F (ISO/IEC 11801) cable specifications require transmission frequencies of up to 600 MHz over 100 meters of fully shielded copper cabling. CAT7 cable consists of four individually shielded pairs inside an overall braided shield also known as Shielded Twisted Pair Cable (SSTP) or S/FTP (Shielded Foil Twisted Pair). CAT7 features even more stringent specifications for crosstalk and system noise than CAT6 and is designed specifically for Gigabit Ethernet applications (Gigabit over copper).Vention CAT7 cables exceed the current ISO/IEC specifications and represent the next generation in Ethernet over copper.Used to connect your network device to any of the following: 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Backwards compatible with CAT5 CAT5e CAT6 and CAT6a equipment.Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel. Complies with TIA/EIA 568B standard.Virtually eliminates alien crosstalk and interference.Performance rated beyond 600 MHz.
Features: High quality imaging with 4 MP resolution Excellent low-light performance with powered-by-DarkFighter technology Motorized Varifocal lens for easy installation and monitoring Clear imaging against strong backlight due to 120 dB true WDR technology Efficient H.265+ compression technology Focus on human and vehicle targets classification based on deep learning Water and dust resistant (IP66) and vandal proof (IK10)
* Võimaldab kahel arvutil jagada kuni 4 seadet(hiir, klaviatuur, USB pulk, skänner, printer jne) * 2x USB 3.0 sisse/ 4x USB 3.0 välja * kuni 5Gbps Data * Võimalik lisatoide läbi micro USB pesa * Mõõdud 105x53x16mm
Cable length: 2 Other features: Length: 2m, AWG 26 (8*7*0.16mm), Conductor stranding: cord 7*0.16mm, HDPE conductor insulation: 0.98mm, With aluminum foil for each pair, With 80*0.12ALMG braid. LSZH external insulation: 6.0mm, Color: Black RAL9004, Operation up to 500Mhz, Compatibility with ANSI/TIA/EIA-568B standards, Packaging: string bag.
The LHG XL HP5 is a 5GHz 802.11 a/n wireless device with an integrated dual polarization 27 dBi grid antenna and high TX output power, designed to reach up to 40km in point-to-point setups at full speed. The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables. 4PACK
The effective connection distance is 100 meters on Cat5e/Cat6 cable. The solution is small but very effective. The DN-95132 is an active indoor PoE midspan injector power supply designed specifically for complex backhaul and networking applications. Provides 52 V DC, 0.58 A power for external devices requiring PD power through 2 pairs of output sockets. The solution supports both 10/100 Base-T and Gigabit compatible devices. The solution works with devices that support PD PoE with a power of 30 W, such as wireless access points, WLAN routers, network cameras, IP phones, radio devices and other end devices compatible with power over Ethernet. The solution is fully compliant with the PoE IEEE802.3af standard. The device has a plastic housing protected against fire with a protection level of IP40. The solution supports a wide input voltage range of 100-240 V AC, 50 or 60 Hz. It has a detection chip inside that recognizes and classifies a power-demanding device (PD) before power is supplied to that device. Provides power only when a device supporting the PD (Power Delivery) standard is detected. provides 52 V DC, 0.58 A power for external devices requiring PD power through 2 pairs of output sockets support for both 10/100 Base-T and Gigabit compatible devices the solution supports a wide input voltage range of 100-240 V AC, 50 or 60 Hz Easy-to-use combination of power and data cables in one cable Each output port offers output current limit function, short circuit protection, full powered device detection and classification (PD) Injector can be used regardless of the operating system
ZenWiFi Pro is a new paradigm for whole-home WiFi networking, combining performance and beauty in a perfectly balanced package. Working with the ASUS WiFi 6E ecosystem, it takes the performance and entertainment of your entire home network to the next level. More streams, more bandwidth The ZenWiFi Pro ET12 is a 12-stream device with a total data rate of up to 11,000 Mbps. This increases its ability to simultaneously stream and receive data to a large number of devices, reducing dead zones and giving the ZenWiFi Pro ET12 a performance edge in the busiest home networks. RangeBoost Plus ASUS RangeBoost Plus is the latest, most powerful version of our renowned RangeBoost technology that improves the range of all WiFi devices, including legacy devices. Using Broadcom's flagship next-generation WiFi chipset and 64-bit 2.0GHz quad-core processor, RangeBoost Plus leverages a host of exclusive ASUS technologies to dramatically improve WiFi range and signal coverage by up to 38%. Easy scalability for flexible networking With ASUS AiMesh, it's easy to add additional nodes to increase range or new features simply add any AiMesh-compatible router! Dual LAN and 2.5G WAN ports ZenWiFi Pro ET12 has both a 2.5G LAN port and a 2.5G WAN port, so you can enjoy full 2.5Gbps speeds from a compatible ISP to compatible wired devices. New 6 GHz band for a stable backhaul connection The 5 GHz and 2.4 GHz bands are becoming increasingly crowded with the growing number of home devices. The new 6 GHz band is reserved exclusively for 6E WiFi devices, so there is no interference from other older devices. This makes it ideal for use as a stable backhaul connection. You can also select wired Ethernet for the backhaul connection between nodes. Alternatively, you can select automatic mode and let ZenWiFi Pro ET12 choose the best type of connection depending on your environment. The choice is always yours! Designed with performance in mind ZenWiFi Pro ET12 is designed to deliver maximum WiFi performance with throughput improved by up to 18% thanks to the latest Broadcom WiFi chipset and processor. The eight external antennas are carefully positioned and angled in a special transparent chamber on top of the router to minimise interference and maximise signal coverage. Commercial-grade protection for your home The security of your home network is crucial when you have many connected devices, especially if your network includes devices without antivirus protection, such as IoT devices. ZenWiFi Pro ET12 includes free AiProtection Pro for life, including advanced parental controls, and uses the latest WPA3 security protocol.
The DIGITUS® 48 Port 1U Modular Patch Panel ensures a High Density with the benefit of 48 Keystone Jacks in just one height unit.- Layout Keystone Entry: Straight- Area of application: 19" cabinet- Norms: ISO/IEC 11801 2nd Ed., EN 50173-1, EIA/TIA 568-C- General properties:- Suitable for 483 mm (19") cabinet mounting- Suitable for shielded Digitus® Keystone Modules and Couplers- Central ground connection- Plastic label field- Technical properties:- Housing material: 1.5 mm SPCC cold rolled stell sheet, powder-coated- Material standard: EN 10 130(1991), BS 1449, NFA 36/401, DIN 1623, UNI 5866, UNE 36-086, SIS, JIS G 3141, ASTM, SAE- Grounding bar material: Galvanized steel- Grounding wire: 18 AWG, 40 cm- Physical properties:- Operation temperature: -20° C to +70 °C (ISO/IEC 11801, EN 50173-1, ANSI/TIA/EIA 568 C)- Category: CAT 6A- Ports: 48- Color: black, RAL 9005- Units: 1KaabeldustehnoloogiaCAT 6APortide hulk48Toote värvMustMaterjalGalvaniseeritud terasPüstikmontaažJahPüstiku mahutavus1USuhteline õhuniiskus (H-H) hoiustamisel-20 - 70 protsenti
