LevelOne KILBY 28-Port L3 Lite Managed Gigabit Fiber Switch GTL-2872The GTL-2872 switch is a Gigabit Ethernet access switch with four 10G uplink ports. The switch is ideal for Internet Service Providers (ISPs) and Multiple System Operators (MSOs) to provide home users with triple-play services with up to Gigabit bandwidth. It is also an ideal Gigabit access switch for SMB, enterprise, and campus networks. The GTL-2872 switch is packed with features that bring high availability, comprehensive security, robust multicast control, and advance QoS to the network edge, while maintaining simple management. The switch also supports the most advance IPv6 management, IPv6 security, and IPv6 multicast control in accordance with the growth of IPv6 deployment. ISPs can expand their services from home to business users by providing a more reliable and resilient network (ITU-T G.8032 ERPS), L2 VPNs, and advanced OAM (Operations, Administration, and Maintenance) functions to ensure service-level agreements.Standards:IEEE 802.3 10-BASE-T, EthernetIEEE 802.3u 100-BASE-TX, Fast EthernetIEEE 802.3ab 1000BASE-T, Gigabit EthernetIEEE 802.3ad Link Aggregation Control ProtocolIEEE 802.3ae changeable (10GBASE-SR/LR/ER)IEEE 802.3z (1000BASE-SX/LX/LHX/ZX) transceivers, and 10G DAC/AOCIEEE 802.3x Flow ControlIEEE 802.3x for full duplex mode , Back-Pressure for half duplex modeIEEE 802.1D Spanning Tree Protocol (STP)IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)Memory: Flash 256MBBuffer Memory: DRAM 512MBPort:20 x 1G SFP port4 x 10/100/1000 (RJ45/SFP) Combo port4 x SFP+ 10 Gigabit Uplink Port1 x RJ45 Console portIndicator: PWR, DIAG, LINKPower Input: 100-240VAC, 50-60HzDC Power Input (48-60VDC)Power Consumption: 21.48WBackplane (Gbps): 128GbpsMAC Address Table: 16KPower Saving: IEEE 802.3az Energy-Ef?cient Ethernet (EEE)Operating Temperature (°C): 0ºC ~ 50ºCOperating Humidity (Non-condensing): 10% ~ 90%Storage Humidity (Non-condensing): 10% ~ 90% General:Tri-speed (10/100/1000BASE-T) copper interfacesAuto-negotiation for port speed and duplex modeAuto MDI/MDI-XDigital Diagnostic Monitoring (DDM) on 10G SFP+ port onlyVLANs:Supports 4K VLANPort-based VLANIEEE 802.1Q VLANGVRPVLAN TrunkingIEEE 802.1v Protocol-based VLANIP Subnet-based VLANMAC-based VLANTraffic SegmentationL2 Virtual Private NetworkQ-in-QVLAN TranslationL2 Protocol tunneling (xSTP, CDP, VTP & PVST+)CDP/PVST+ FilteringIGMP Snooping:IGMP v1/v2/v3 snoopingIGMP Proxy reportingIGMP FilteringIGMP ThrottlingIGMP Immediate LeaveIGMP QuerierOAMIEEE 802.3ah LinkIEEE 802.1ag Connectivity Fault Management :Connectivity checkLoopbackLinktraceITU-T Y.1731 Performance and Throughput Management:Frame DelayFrame Delay variationIPv4/IPv6 dual protocol stackSecurity:Port securityIEEE 802.1X port based and MAC based authentication Dynamic VLAN Assignment, QoS AssignmentMAC authentication Web authentication Voice VLANGuest VLANL2/L3/L4 Access Control ListPrivate VLANRADIUSPort IsolationWeb-based GUIManagement:CLI, WEB, TELNETL3:IPv4 static routeIPv6 static route Packet Forwarding Rate: 95MppsJumbo Frame (K): 9KBSwitching Capacity: 128Gbps
LogiLink's Home Cables are perfect for home or office cabling. The new, compact Cat.7 Home Cable from LogiLink meets all the requirements of the IEEE 802.3 standard for applications up to 10GBase-T and is ideal for use with LogiLink RJ45 connectors MP0030, MP0033 or MP0044 for the production of connecting cables in the desired length. It even better than Cat.7 cable as Cat.7 is not further advantages are the low weight, the small cable diameter and the low bending radius.
The Intel® Ethernet Converged Network Adapter X710-DA4 is a 10 Gigabit network card with four SFP+ ports for a PCI Express slot with at least eight lanes. The heart of the Ethernet Converged Network Adapter X710-DA4 is an Intel® X710-AM2 controller, which enables transfer rates of up to 10 GBit/s. Type LAN adapter EAN 5032037063425 Manufacturer no. X710DA4FHBLK PCIe x8 slot SFP+ connections Data transfer rates LAN 10 GBit/s Chipset Intel® XL710-AM1 Weight 193 grams
5m SFP+ 10Gbps Active Optics direct attach cable. This is highly cost-effective way to connect two SFP/SFP+ devices for very short distances, within racks and across adjacent racks. It works with all our products with SFP/SFP+ ports, including new RB4011 series (RB4011 series are not compatible with our passive direct attach cables S+DA0001 and S+DA0003)
The DIGITUS L2 managed Gigabit PoE Switch with 8 PoE+ ports and 2 Gigabit SFP ports is ideal for use in various network topologies such as SMBs. The extensive L2 configuration options allow you to increase the performance and efficiency of your network. The switch offers the possibility to segment the network via VLAN, the QoS feature ensures smooth data exchange for time-critical applications. The Spanning Tree Protocol or the Port Trunk can be used to create fail-safe connections with other switches. The switch can be managed via the web interface, SNMP, SSH or Telnet.
The DIGITUS Industrial Fast Ethernet Switch is designed for harsh environments where it is exposed to moisture, temperature fluctuations and vibration. With a temperature range of -40°C to 85°C, the Industrial Fast Ethernet Switch can be used under the most adverse conditions. The PoE ports with IEEE802.3af/at support can supply PoE capable devices with up to 30 W per port. It ensures a constant availability in highly sensitive areas such as transport, production, traffic and safety monitoring. The simple plug and play system allows the Industrial Fast Ethernet Switch to be quickly integrated into the respective environment. With its Fast Ethernet connectivity, the Industrial Fast Ethernet Switch is a flexible, cost-effective solution for the industrial environment.
CAT6 UTP Patch CableVention CAT6 Patch Cord is used in network applications such as 10Base-T 100Base-T 1000Base-T Ethernet and have been designed specifically for Gigabit Ethernet applications (Gigabit over copper). They perform at high-data transfer rates. These cables deliver improved performance over standard CAT5E cables.CAT6 is completely backward-compatible with current CAT5 CAT5E equipment. Vention CAT6 Patch Cords are composed of 4 pairs 26AWG stranded conductors with PVC jackets. Conductors are wired to gold plated RJ45 plugs in accordance with the TIA/EIA 568B standard.Used to connect your network card to any of the following: 10GBASE-T Ethernet 1000BASE-T Gigabit Ethernet 100BASE-T Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet Patch cords have stranded copper conductors for flexibility - great for frequent changes that occur at the wall outlet or patch panel.Virtually eliminates alien crosstalk and interference.Performance rated beyond 250 MHz.
