- Complies with the IEEE802.3 Ethernet, IEEE802.3u Fast Ethernet standard- Featuress store-and-forward architecture and performs filtering and forwarding at non-blocking full wire speed- Full/ Half-duplex capability on each port- Support
Original part number WZ0031 Product name LOGILINK - Digital Caliper Producer LogiLink Class of product Tool/Tester Tool type Measuring instrument Additional information Suitable for internal and external measurementImperial or metric readingWith LCD screen displayAdjustable via a friction thumb rollerThe last point is memorized even if the unit is switched offPower on/off buttonLightweight and durableSupplied with carry caseSupplied with LR44 (1.5V) batteryMeasuring range: 0-150 mm / 0-6 inches Datasheet Data sheet
Original part number NPP-C648CM-001 Product name Gembird 19" patch panel 48 port 2U cat.6 with rear cable management, black Producer Gembird Class of product Patchpanel 19"&10" Number of ports 48 Type of connector 1 x RJ45 Category 6 Wiring type no data Additional information Termination: 110-typeSpace saving, high-density 19" panel designDesigned to mount to any standard 19" rack or cabinet50µ gold-plated contactsBlack electrostatic powder-coated steelAccommodates top, bottom or side cable entryWrite-on designation label with clear holder on front sideRear cover with wire management bar Height 89 mm Width 483 mm Depth 33 mm Net weight 1.3 kg Colour Black
Extend a PoE connection beyond the 100m limitIEEE 802.3af and IEEE 802.3at complianceEase of installation with no additional power supplyCompatible with all Axis network video productsIndoor use
Ubiquiti PoE POE-24-12W, 24VDC @ 0.5A, Fast Ethernet Accessory Name POE 24V - 12W Package Type Retail Warranty Products Returnable Yes Warranty Term (month) 12 month(s) Warranty Validation Criteria Serial Number Pieces in pack 1 Packs in Box 1
Build your outdoor fiber network using our FiberCable. Lightweight and flexible, FiberCable is ideal for tower deployments of our outdoor routing and switching products, such as EdgePoint.Outdoor-Rated Jacket with RipcordIntegrated Weatherproof TapeKevlar Yarn for Added Tensile StrengthOuter Diameter of Cable: 6.0 ± 0.2 mmSix-Strand Single-Mode (G.657.A2)Outer Diameter of Fiber Strand: 0.25 mm NominalInsertion Loss1310 nm: ≤0.5 dB/km1550 nm: ≤0.5 dB/km
Using airMAX ac technology, the IsoStation 5AC supports up to 450+ Mbps real TCP/IP throughput. It also offers the following features:Interchangeable horn antennas for enhanced beam shapingHorn feed comes directly from the radio input/output so connectors are eliminatedSingle button release for ease of changing antennasAll metal, shielded radio baseMetal strap for quick pole-mountingThe IsoStation 5AC comes with a 45° isolation antenna. Ubiquiti offer three optional antennas with precise radiation angles for specific beam shaping, so you can customize the IsoStation 5AC for your specific installation requirements:30°60°90°All horn antennas are optimized for co-location. The asymmetrical versions (60° and 90°) narrow the elevation pattern to increase gain where users need it.
Patch panel is designed for use in main and intermediate distribution points of fast telecommunications systems. Is a passive part structured cabling used for termination and organize cables twisted-pair in 19" rack cabinets. Patch panels is equipped with 24 unshielded RJ-45 ports category 5e. Application of IDC/LSA connectors, provides fast and easy installation. Attached cable management panel ensures easy stability of installation. - 24 unshielded RJ-45 ports category 5e. - Identify ports in the form of numbered fields. - Designed for 19" rack cabinets. - Height: 0.5U. - Attached cable management panel. - Universal IDC/LSA connectors in accordance with T568A/B. - Color: black RAL9004.
Patch panel is designed for use in main and intermediate distribution points of fast telecommunications systems. Is a passive part structured cabling used for termination and organize cables twisted-pair in 19" rack cabinets. Patch panels is equipped with 48 unshielded RJ-45 ports category 5e. Application of IDC/LSA connectors, provides fast and easy installation. Stiffened shelf with handles allows easy organization of cables and stability of assembly. - 48 unshielded RJ-45 ports category 5e. - Identify ports in the form of numbered fields. - Designed for 19" rack cabinets. - Height: 1U. - Shelf with handles for easy installation and organization. - Universal IDC/LSA connectors in accordance with T568A/B. - Color: grey RAL7035.
Original part number U3METALGLAN Product name i-tec USB 3.0 Metal Gigabit Ethernet Adapter 1x USB 3.0 to RJ-45 LED Producer iTec Class of product Converter | adapter (without network products) Basic information Basic information Plug 1 type 1x female USB 3.0 A-type Plug 2 type 1 x RJ45 Other information Other information Colour Space Gray Additional information 1x USB 3.0 connector, for connecting to a laptop, tablet or PC1x Ethernet GLAN RJ-45 port supports 10 / 100 / 1000 Mbps speedsSupports Wake-on-LAN, Jumbo frame up to 9k bytes, detection of cable crossoverSupport IEEE 802.3az (Energy Efficient Ethernet)IPv4/IPv6 pack Checksum Offload Engine (COE) to reduce CPU loadingChipset Realtek RTL8153Powered through USB bus, no power adapter is neededOS: Windows 7, Windows 8, Windows 8.1, Windows 10, Mac OS, Linux, Android More info i-tec USB 3.0 adapter metal Gigabit Ethernet
Ubiquiti Networks introduces an innovative sector antenna for your Point‑to‑MultiPoint (PtMP) applications, the airPrism® 5 GHz 3x30° HD Sector Antenna AP-5AC-90-HD.The airPrism antenna features significant advances in noise isolation and beam performance to complement the Rocket®5ac Prism™ radios (not included) for co‑location deployments. 3 x 30° Beamwidth Coverage The three Rocket5ac Prism™ radios are installed at the top, middle, and bottom of the airPrism antenna. Each radio independently transmits and receives within its corresponding 30° beamwidth. Powerful Performance Highly resistant to noise interference, the airPrism antenna provides superior beam performance in high-density areas for high-capacity, multipoint networks. Breakthrough Design Mounted on a single airPrism antenna, three Rocket5ac Prism radios maximize throughput in an efficient tower footprint, minimizing installation and tower costs. Product Specifications • Dimensions: 322.6 x 201.5 x 1300 mm (12.7 x 7.03 x 51.18")• Weight: 13.1 kg (28.9 lbs)• Frequency Range: 5.15 - 5.85 GHz• Gain: 22 dBi• HPOL Beamwidth: 3 x 30° (6 dB)• VPOL Beamwidth: 3 x 30° (6 dB)• Electrical Beamwidth: 8° • Electrical Downtilt: 2°• Max. VSWR: 1.75:1• Polarization: Dual-Linear• Cross-Polarization Isolation: 30 dB Min.• Interfaces: (6) RP-SMA Connectors (Weatherproof)• Compatible Radio: Rocket5ac Prism• Wind Loading: 534 N @ 200 km/h (120 lbf @ 125 mph)• Wind Survivability: 200 km/h (125 mph)• Mounting: Universal Pole Mount, Rocket Bracket, and Weatherproof RF Connectors Included• ETSI Specification: EN 302 326 DN2• Certifications: CE, FCC, IC
TRENDnet’s 1000BASE-T RJ-45 Copper SFP Module, model TEG-MGBRJ, converts a standard SFP slot into a RJ-45 gigabit port for additional copper connectivity. This SFP module works with standard SFP slots commonly found in network switches and fiber media converters. Save on equipment costs by repurposing a switch’s unused SFP slots for copper connectivity. RJ-45 Copper SFP Take advantage of unused SFP slots and repurpose them with RJ-45 copper Ethernet connectivity. Gigabit Speeds 1000BASE-T RJ-45 copper SFP spans distances up to 100m (328 ft.) and supports up to 1.25Gbps. Compatibility Compatible with a MSA compliant SFP slot and 1000BASE-T RJ-45 connections. Ethernet Distance Supports networking distances up to 100m (328 ft.) Connection Interface 1000BASE-T RJ-45 gigabit port Hot-Pluggable SFP Hot-pluggable SFP compatible with a MSA compliant SFP slot Operating Temperature Operating temperature range of 0°– 70 °C (0° – 158 °F)
CCR1072-1G-8S+ is equipped with two redundant Hot Swap 12v 150W AC/DC power supplies - if one of them goes out of order, second one will take over. Hot Swap 12v 150W AC/DC power supplies for CCR1072-1G-8S+ are now available for purchase separately. You can replace them on the go to ensure zero downtime, no need to even restart the router
GPON Optical Line Terminal Configuring a fiber network just became as easy as setting up a smartphone. Say goodbye to command lines, manuals, and paid support licenses. Introducing the UFiber OLT – a fiber solution that anyone can deploy. Features: 8 Gigabit Passive Optical Network PortsSupports up to 1024 Clients (128 per PON Port)Up to 2.488 Gbps TX and 1.244 Gbps RXTwo 1G/10G SFP+ Ethernet PortsFlexible Layer 2/3 Management FeaturesFastEthernet port for managementConsole serial port for management Centralized Management Easily configure the OLT and manage multiple sites using the comprehensive UNMS™ (Ubiquiti® Network Management System) software.Rackmount Design The 1U-high metal chassis allows for convenient mounting in a standard-sized, 19"‑wide rack. Client and Uplink Connectivity The OLT features eight PON ports to connect up to 1024 Nano G devices, and two SFP+ ports deliver up to 20 Gbps of uplink connectivity. Power Versatility Featuring low power consumption, the OLT offers two modular power bays. The first bay includes an AC/DC power module. The second bay can house an optional power module, either an AC/DC backup or a DC/DC power module.
The new DIGITUS Patch Cable series is back with a reworked plug on the market. The Bend protection sleeve with latch protection prevents snagging the cable and also protects the latching lever before break. The connector can be different in color depending on the category: a blue plug for CAT5e, a red plug for CAT6 and a yellow plug for CAT6A. We also offer a variety of different colors and lengths to meet all demands.For more information, please see our Patch Cable brochure!- 2 x RJ45 connectors- Boots with kink protections and strain reliefs- Plugs with new design- Spot length on bootKaabli pikkus10 mKaablistandardCat5ePistmik 1RJ-45Pistmik 2RJ-45Kaabli kateU/UTP (UTP)Toote värvMustSuguMale/MaleMantli materjalPolüvinüülkloriid (PVC)AWG-juhtme läbimõõt26/7
Tootja: Lanberg Tootegrupp: Installation võrguseade kaabel juhtme tüüp: UTP - unschielded twisted pair kaabel, 4 pairs Category: 5e Inner conductor diameter: 0.18 mm Coating type: PVC - polyvinyl chloride Lisaandmed: The wires are made of copper conductor kaabel (CCA), Printed pikkus counter at every meter of kaabel pikkus: 305 m värv: hall Brutokaal: 7.38 kg Packaging type: box 305m
10/100/1000 ports with automatic detection of optimal network speed Auto-MDIX (auto uplink) support on all RJ45 ports For use as a desktop switch or for mounting in a 19" rack NWay autonegotiation support Store and Forward switch architecture Full/half duplex mode Support for 802.3x flow control for full duplex mode and collision-based backpressure for half duplex mode Green Ethernet power reduction technology deactivates unused ports and adjusts power levels based on cable length Compliant with IEEE 802.3az (Energy Efficient Ethernet EEE) specification Bus bandwidth 48 Gbps Support for jumbo frames up to 9 KB MAC address table with up to 16k entries Memory buffer 512kB MAC address support with auto-learning and auto-aging functions Fanless design ensures quiet operation 19" rack mounts included Fully NDAA compliant
8 x Gigabit PoE+ ports 61W PoE budget 16Gbps switching capacity Sturdy metal switch Plug and Play installation Use with TRENDnet's PoE Splitter to network and power non-PoE devices The 8-Port Gigabit PoE+ Switch, model TPE-TG82g, delivers data and power over existing Ethernet cables to Power over Ethernet (PoE) devices such as Access Points and IP Cameras. It supports both PoE and PoE+ devices with a 61W PoE budget. Plug and Play this sturdy metal switch for reliable high-speed PoE networking. PoE Power A 61W PoE power budget supports up to eight Power over Ethernet devices. Gigabit Ethernet Eight gigabit ports provide a 16Gbps switching capacity to support edge network installations. Compact Design With a compact and lightweight housing design, this switch is well-suited for desktop installations. Its fanless design is ideal for quiet environments that require silent operation. PoE Supplies up to 30W of PoE+ power per port with a total power budget of 61W. Supports both PoE (802.3af) and PoE+ (802.3at) devices. Ports Eight gigabit PoE+ ports Switching Capacity 16Gbps switching capacity Jumbo Frame Sends larger packets, or Jumbo Frames (up to 9KB) for increased performance Energy Savings Embedded GREENnet technology reduces power consumption Housing Sturdy metal housing LED Indicators LED indicators convey port status
• 20 m • RJ-45 Sirge Meessoost • RJ-45 Sirge Meessoost • Cat6a S/FTP (S-STP) • 10 Gigabit Ethernet, Kiire Ethernet, Gigabit Ethernet 10000 Mbit/s • Power over Ethernet tugi Isehäälestuv • Roheline Equip 605649, 20 m, Cat6a, S/FTP (S-STP), RJ-45, RJ-45, Roheline
