Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 1 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: sinine
New revision of Gigabit Ethernet Surge Protector in IP67 waterproof enclosureHere’s what a typical use-case would be like. You have a mast with some antennas. And some switches on the ground. Put the GESP surge protectors on each end. They come sealed inside a new and improved IP67 weatherproof enclosure. Your antennas are now safe during a lightning storm.Don’t forget about the grounding wire! Secure it to the rackmount mast or any other structure that is connected to the ground. For maximum protection you should use a surge protector on both ends of long cables.
See Delocki adapter võimaldab ühendada USB Type-C™ sisendiga seadme USB Type-A emasportiga. Spetsifikatsioon - Liitmikud: 1 x USB 2.0 Type-A isane (host): 1 x USB 2.0 Type-A isane (host) 1 x USB Type-C™ female (seade) - Andmeedastuskiirus kuni 480 Mbit/s - Maksimaalne väljundvool: 3 A - Pinge: max. 5 V - Värv: must - Mõõtmed (LxSxK): ca. 20 x 15 x 7 mm Süsteeminõuded - Arvuti või sülearvuti, millel on vaba USB A-tüüpi port Pakendi sisu - USB-C™ adapter
Parameters Rated Value Single output power 20 W Input voltage range 100-240 VAC 50/60 Hz DC output voltage 12 V DC output current 0~1.67 A Output ripple and noise 120 mVp-p Line regulation ±1 % Load regulation ±1 % Efficiency 80 % Adjustable range for DC voltage ±1 % Test standard EN60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013EN55022:2010EN61000-3-2:2014EN61000-3-3:2013EN55024:2010/A1:2015 Inrush current Cold start current 20 A/ 115 VAC; 40 A/ 230 VAC Overload protection 105 % ~ 160 % cut off the output automatic recovery Over voltage protection 120 % ~ 140 % shut down O/P voltage re-power on to recover Setup rise hold up time 500 ms; 30 ms/ 230 VAC at full load; 1000 ms; 30 ms/ 115 VAC at full load Withstand voltage I/P-O/P: 1.5 kV; I/P-FG: 1.5 kV; O/P-FG: 0.5 kV 1 minute Isolation resistance I/P-O/P I/P-FG O/P-FG: 500 VDC/ 1000 MΩ Working temperature -10 °C ~ +50 °C Mounting options 35 mm DIN Rail Dimensions 22.5 x 90 x 100 mm Weight 190 g
"Cisco Catalyst 1300-24XT kommutaator kuulub Cisco täielikult hallatavate kommutaatorite sarja, mis pakuvad usaldusväärset ja turvalist ühenduvust väikeettevõtete võrkudes. Need kommutaatorid kiirendavad teie digitaalset ümberkujundamist täieliku Layer 2/3 võimekuse, intuitiivse veebi armatuurlaua, täiustatud võrgufunktsioonide ja PoE+ toe abil.
Discover the full potential of your networkExperience a reliable and efficient plug-and-play network device. With 4 10/100/1000 Mbps ports with PoE function, as well as additional Uplink (RJ45 1000 Mbps) and SFP (fiber 1000 Mbps) ports, the device allows you to create a flexible and scalable LAN - without unnecessary power cables, external power supplies or additional switches.Reliable communication - Widely used in any spaceThe switch is designed for users who need a reliable network connection in various environments:in home multimedia networks (movie streaming, online gaming, smart home operation),In IP surveillance (support for PoE-powered cameras),in small and medium-sized companies (Wi-Fi access points, VoIP, NAS servers),in fiber optic installations (thanks to the SFP port - e.g., interconnection between buildings). Power up and transfer data at speeds of up to 1 Gb/sDiscover new possibilities with a Qoltec device that offers: Compliant with IEEE 802.3af - offering up to 15.4W per port and up to 65W total output power for the entire switch,Automatic detection of PoE devices,SFP port for fiber optic connections,Data transmission speed up to 1Gbps, Robust metal housing protects the electronics inside and allows for operation in more demanding conditions,Quiet operation thanks to passive cooling, Plug & Play - no configuration. Quiet operation, sturdy metal construction and instant installationOur device Offers instant and hassle-free installation, thanks to Plug &Play technology, which requires no additional configuration or technical expertise. You only need to follow a few simple steps. First, connect the devices to the appropriate RJ45 ports using the appropriate network cables and then connect one of the ports to your router or access modem. Make sure the LEDs on the switch indicate activity on the ports. The rugged metal housing protects the electronics, provides durability, resistance to electromagnetic interference and efficient heat dissipation, resulting in long and stable operation.
IEEE 802.3at and IEEE 802.3af Power over Ethernet (PoE) compliant Supports PoE Class 2 (7 watts) , 3 (15.4 watts), and 4 (30 watts) 8 x Gigabit Auto-MDIX PoE / PoE+ ports Provides up to 30 watts for PoE+ Provides up to 15.4 watts for PoE Automatically detects the PoE class level of a Powered Device 16 Gbps switching fabric Forwarding Rate: 1000 Mbps (1,488,000 pps), 100 Mbps (148,800 pps), 10 Mbps (14,880 pps) Status LEDs: System Power, PoE, 1000 Mbps, and Link/Activity 1K Mac address entries 96 Kbyte memory buffer Full wire-speed non-blocking reception and transmission Store-and-forward switching method Back pressure Flow Control for Half-Duplex mode IEEE 802.3x Flow Control for Full-Duplex mode Power saving technology powers down unused ports and when a connected device is in standby mode Jumbo Frame support up to 9K Plug and Play Sturdy metal case 3-year limited warranty
Striving towards sustainability, this drive contains at least 30% postconsumer recycled materials by weight. Featuring a smooth, natural design - this lightweight and portable drive brings a soft elegance to your workspace. Plus, it features Plug-and-Play USB-C compatibility with PC, Mac, and Chromebook.
Lihtne paigaldus 4 x Gigabit PoE+ porti ja 1 x Gigabit porti Võtab DIP-lüliti sisse, et laiendada PoE+ signaali kuni 200 m (656 jalga) 10Mbps kiirusel. DIP-kommutaator toetab VLAN-portide isoleerimist ja QoS-i 10 Gbps lülitusvõimsus 32W PoE eelarve Seinale paigaldatav disain Vastupidav metallist lüliti Kasutage koos TRENDneti PoE jagajaga, et ühendada võrku ja toita mitte-PoE-seadmeid 5-pordiline Gigabit Long Range PoE+ Switch, mudel TPE-LG50, edastab andmeid ja toite üle olemasolevate Ethernet-kaablite Power over Ethernet (PoE) seadmetele, nagu pääsupunktid, VoIP-telefonid ja IP-kaamerad. See toetab nii PoE (802.3af) kui ka PoE+ (802.3at) seadmeid 32 W PoE-eelarvega. Võta DIP-lüliti sisse, et pikendada PoE+ signaali kuni 200 m (656 jalga) 10Mbps kiirusel, et pikamaa PoE-installatsioonid saaksid toimida. Ühendage ja mängige see tugev metallist lüliti usaldusväärseks kiireks PoE-võrguks. Selle ventilaatorita disain sobib ideaalselt vaiksesse keskkonda, mis nõuab vaikset tööd. PoE+ võimsus 32 W PoE-võimsuse eelarve toetab kuni nelja Power over Ethernet seadet. Gigabit Viis Gigabit-porti pakuvad 10 Gbps kommutatsioonivõimsust, et toetada servavõrkude paigaldamist. Pikaulatuslik PoE+ kommutaator Võta DIP-lüliti kasutusele, et laiendada PoE+ signaali kuni 200 m (656 jalga) 10Mbps kiirusel. PoE+ Annab kuni 30 W PoE+ võimsust ühe PoE-pordi kohta 32 W võimsuse eelarvega. Pordid Neli Gigabit PoE+ porti ja üks Gigabit-port Pikaulatuslik PoE+ Võtab DIP-lüliti sisse, et pikendada PoE+ signaali kuni 200 m (656 jalga) pikkade PoE-paigaldiste jaoks. Portide isoleerimine DIP-lüliti on ideaalne järelevalvevõrkude rakenduste jaoks, kuna see võimaldab ka portide 1-4 isoleerimist. Lülitusvõimsus 10 Gbps lülitusvõimsus Korpus Seinale paigaldatav metallist korpus LED-indikaatorid LED-indikaatorid edastavad PoE ja pordi olekut
Tootegrupp: PoE toiteplokk pakkuja tüüp: Power over Ethernet Injector sisendpinge: 24 V DC, 57 V DC väljundpinge: 24 V DC, 57 V DC Lisaandmed: 16 ports 100Mbps, Input ja väljund pinge 24 to 57 V DC
Symmetrical Horn CC Antennas Gen2 offer unique RF performance in a compact package. Scalar horn antennas have symmetrical main beam with identical beam width in Vertical and Horizontal plane. Exceptionally small side lobes ensure remarkable interference suppression. HG3-CC Gen2 Antennas are ideal for coverage of areas with clients close to the installation site, where null zone issues exist. High density AP clusters and radio co-location is made possible due to unique radiation patterns and compact size.Symmetrical Horn CC Antennas Gen2 feature multiple improvements of RF performance and design, namely, optically lighter body and significantly improved bracket. Radome is made of more resistant material, and all of HG3-CC Gen2 antennas use only two radome sizes. HG3-CC Gen2 antenna is equipped with N-female connectors.90° Symmetrical Beam Antenna HG3-CC-S90Frequency Range: 5180 - 6400 MHzGain: 9.6 dBiAzimuth Beam Width -6 dB: H 60° / V 60°Elevation Beam Width -6 dB: H 60° / V 60°Mechanical Tilt: ± 25°Pole Mounting Diameter: 30 - 80 mmUnique Beam PerformanceSymmetrical Horn TP Antennas have a unique beam shape and characteristics. The beam section is circular: azimuth and elevation radiation angles are identical.N-type ConnectorsSymmetrical Horn Carrier Class Antennas feature N-type female connectors, used with wide range of Radios. For example, mimosaTM, Cambium NetworksTM PMP450, LigoWaveTM, and many others. Users of UBNTTM Rocket M5 Titanium, MikroTikTM connectorized radios (NetBoxTM, BaseBoxTM and NetMetalTM) can also utilize coaxial ports on Carrier Class Symmetrical Horn Antennas.
CAT8 SSTP Patch CableVention CAT8 cables are capable of reaching up to 40Gbps transfer speeds and up to 2000MHz bandwidth. These CAT8 patch cords consist of 4 pairs 28 AWG stranded copper conductors and RJ45 connectors. Cat.8 patch cables are backwards compatible with CAT5E CAT6 CAT6A and CAT7.Used to connect your network device to any of the following: 40GBASE-T Gigabit Ethernet 25GBASE-T Gigabit Ethernet 10GBASE-T Gigabit Ethernet 1000BASE-T Gigabit Ethernet 100BASE-TX Fast Ethernet 10BASE-T Ethernet CAT8 Performance for a 10GBASE-T 25GBASE-T or a 40GBASE-T channel compliant network up to 30 meters; 10Gbps support up to 100 meters. Optimize the distance and power in high density networking End of Row (EOR) Top of Rack (TOR) or Middle of Row (MOR) configurations at the data center. Cat 8 supports interconnect topologies that are limited to 2 connections in a 30 meter channel for 25Gbps or 40Gbps network speeds.Vention CAT8 patch cord provides a lower cost alternative than OM3 fiber connections under 30 meters or a SFP+ twin-axial connection under 5 meters; Cat 8 Ethernet cable supports auto-negotiation for compatibility with mixed network server speeds from 1 Gbps to 40 Gbps.The superior Shielded design of this Cat 8 cable includes individually foil-shielded bare copper connectors encased in a overall steel braid; fully shielded metal connectors have gold-plated RJ45 contacts and a snag-less boot with molded strain relief; Tested to support up to 2000 MHz (2 Ghz) that is 4x the frequency of Cat 6A cable or Cat7 cable.
The 60 GHz Precision Alignment Mount enhances mounting flexibility and device alignment. It features an easy-to-use design that requires only an Allen wrench (included) to align.
MT48-570080-11DG is 57 V 0.8 A power supply. It's part of our GPEN concept that provides all the benefits of GPON but utilizes well-proven simple and inexpensive Ethernet solutions.MT48-570080-11DG allows using long Ethernet cable runs and multiple GPER units - please refer to the table in the last page of GPEN concept brochure in the link below.
