Ethernet Surge Protector Gen2 - It's an updated version of the original ETH-SP. Improves the surge protection performance significantly.ESD Protection for Outdoor PoE DevicesDamaging electrostatic discharge attacks and surges are diverted to the ETH-SP-G2 and safely discharged into the ground, so network devices are protected.Additional ESD ProtectionAll Ubiquiti® airMAX® devices are equipped with built-in ESD protection, so the ETH‑SP-G2 adds another layer of protection to your outdoor, high-speed network.Plug and Play InstallationConnect the ground and Ethernet cables in between your network devices.
Deploy the UniFi nanoHD AP in high-density environments requiring maximum wireless performance and minimal footprint. The UniFi nanoHD AP features simultaneous, dual-band, 4x4 MU-MIMO technology and convenient 802.3af PoE compatibility.
Tootja: Lanberg Tootegrupp: Installation võrguseade kaabel juhtme tüüp: CAT5E Category: 5e Lisaandmed: LAN kaabel category 5e UTP (unshielded) gelled väline. AWG 24 (4x2x0.5mm)., The wires are made of pure copper (CU 100% bare copper). , External PVC insulation pikkus: 305 m värv: hall
TRB family devices are designed to be small, lightweight and energy efficient - allowing you to do IoT projects with ease. TRB142 comes with widely used RS232 port for remote device management. It contains a high performance ARM Cortex-A7 1.2GHz processor and 128 megabytes of RAM. It is equipped with mission-critical LTE capabilities and a Linux environment offering high degree of customization.HardwareMobileLTE(Cat1)/3G/2GCPUARM Cortex-A7 1.2 GHz CPURAM128 MBytes (50 MBytes available for userspace)Flash512 MBytes (70 MBytes available for userspace)Power connector4 pin industrialSIM slotMini SIM (2FF)Antenna connectors1 x SMA for LTELEDsPower, signal, network and data statusRS232 connectorDB9 socket, 5 pin configuration with flow controlOtherMicro-USB connector, Reset buttonSecurity/SW featuresNetworkingFirewall, NATRS232 related servicesModbus, Serial over IP, NTRIPRemote ManagementRMS Support, FOTA support, SSH, CLI, SMS UtilitiesAdditional featuresUSB virtual network interface, Input/OutputElectrical, Mechanical & EnvironmentalInput voltage9 - 30 VDCOperating temperature-40° C to 75° CStorage temperature-45° C to 80° COperating humidity10% to 90% non-condensingStorage humidity5% to 95% non-condensingDimensions60 mm x 70 mm x 18 mmWeight50 gMobileLTE(Cat1)/3G/2GCPUARM Cortex-A7 1.2 GHz CPURAM128 MBytes (50 MBytes available for userspace)Flash512 MBytes (70 MBytes available for userspace)Power connector4 pin industrialSIM slotMini SIM (2FF)Antenna connectors1 x SMA for LTELEDsPower, signal, network and data statusRS232 connectorDB9 socket, 5 pin configuration with flow controlOtherMicro-USB connector, Reset buttonSecurity/SW featuresNetworkingFirewall, NATRS232 related servicesModbus, Serial over IP, NTRIPRemote ManagementRMS Support, FOTA support, SSH, CLI, SMS UtilitiesAdditional featuresUSB virtual network interface, Input/OutputElectrical, Mechanical & EnvironmentalInput voltage9 - 30 VDCOperating temperature-40° C to 75° CStorage temperature-45° C to 80° COperating humidity10% to 90% non-condensingStorage humidity5% to 95% non-condensingDimensions60 mm x 70 mm x 18 mmWeight50 g
• Allows adjustment both vertically and horizontally • Supports all LHG series, products, including LHG XL. • Made from metal. • Package also includes a U-bolt and a mounting kit.
CRS354-48P-4S+2Q+RMIf you are looking for a single switch that will put your network setup ahead of the curve and power all the necessary devices – look no further! The new CRS354-48P-4S+2Q+RM is an effective and adaptable rackmount solution for managing networks in the most demanding environments. Unlike many other switches out there, our products are made with the system administrator in mind. This powerful switch has 48 x 1G RJ45 ports and 4 x 10G SFP+ ports. There are also 2 x 40G QSFP+ ports for extremely fast fiber connections or linking with other 40 Gbps devices. All 48 Ethernet ports offer different power output options: Passive PoE, low voltage PoE, 802.3af/at (Type 1 “PoE” / Type 2 “PoE+”) with auto-sensing, making this switch the easiest solution to power even the largest setups. We have included a mighty power supply that can provide 750 W of power – this switch can handle a lot. And there is a special bracket for easy cable management. CRS354-48P-4S+2Q+RM is extremely functional, and it has the best price-point on the market – it will make the perfect addition to a professional setup. The total non-blocking throughput is 168 Gbps, switching capacity is 336 Gbps and the forwarding rate reaches 235 Mpps. Included parts
MR70X | Available bandwidth 1800 Mbps | Data transmission speed 1200 Mbps | Wi-Fi 6 | 1 WAN | 3x10/100/1000M | Antenna Type Omni-Directional | Antenna Gain 5 dB | Number of antennas 4 | Dimensions 208.8 × 171.6 × 41.7 mm
LT500 4G LTE AC1200 Dual Band WiFi Router LTE speed up to 150 / 50Mbps AC1200 Wi-Fi for smoother operation High-gain antennas for extended range PPTP/L2TP/OpenVPN/WireGuard/IPsec/Zerotier VPN Compatible with over 15 DDNS providers DNS via Cloudflare/NextDNS/Google
WE4000 Network Adapter AX5400 Wi-Fi 6/6E Bluetooth 5.2 PCIe Tri-Band 2402Mbps + 2402Mbps + 574Mbps Speed Bluetooth 5.2/4.2/4.0 Magnetic antenna base with 1.5 m RF cable Intel Wi-Fi 6E chipset AX210 802.11ax/ac/a/b/g/n
This table microphone by Delock is suitable for use in conferences. Optimal recordings The microphone has a circle pattern (omnidirectional) and therefore captures the acoustic signal ideally. Due to a high power, low self-noise and precise performance, even the finest sounds are optimally recorded. Touch mute button & status LED The touch mute button quickly mutes the microphone. The LED is red when muted and green when recording. Headphone output The microphone has a 3.5 mm stereo jack output for connecting headphones or speakers. Plug & Play Due to USB Plug & Play the microphone is ready to use immediately, no driver installation is needed. The microphone works with all common operating systems such as Windows, Mac OS, Chrome OS and Linux. Specification • Connectors: 1 x USB 2.0 Type-A male 1 x 3.5 mm 3 pin stereo jack female • Directivity: omnidirectional • Sensitivity: -16 dB +/- 3 dB • Frequency range: 100 Hz - 10 kHz • Sample rate: 16 Bit / 44.1 kHz • Signal-to-noise ratio (SNR): ca. 65 dB • Mute-Button • Status LED • Cable length: ca. 1.5 m • Colour: black • Dimensions (Ø x H): ca. 75 x 19 mm • USB bus powered • Plug & Play System requirements • Chrome OS • Linux Kernel 4.4 or above • Mac OS 10.9 or above • Windows 7/7-64/8.1/8.1-64/10/10-64 • PC or laptop with a free USB Type-A port Package content • USB microphone • User manual
7-57 V Lai valik toetatud toitepingeid TOITEPISTIKUPESA 2-poolne tööstuslik alalisvoolupesa SFP 2 x SFP-port kaugkasutatava fiiberoptilise side jaoks KESTVUS Vastupidav alumiiniumist korpus tööstuslikuks kasutamiseks KORRALDUS DIN-riba ja pinnapealse paigalduse võimalused ETHERNET 8 x Gigabit Ethernet-porti kiirusega kuni 1000 Mbit/s TSW210 on tööstuslik haldamata kommutaator ressursside tsentraliseerimiseks. Varustatud 2 SFP-portiga pikamaa valguskaabelühenduseks ja 8 Gigabit Ethernet-porti kiirusega kuni 1000 Mbit/s allalaadimise/üleslaadimise kiirusega. Vastupidav, vastupidav alumiiniumist korpus koos DIN-riba ja pinnapealse paigaldamise võimalustega teeb TSW210 ideaalseks tööstuskeskkondadesse. 2-poolne tööstuslik alalisvoolu pistikupesa, mille sisendpinge on vahemikus 7-57 VDC.
AC1350 Wireless MU-MIMO Gigabit Ceiling Mount Access Point. - Fast Dual-Band Wi-Fi: Simultaneous 450 Mbps on 2.4 GHz and 867 Mbps on 5 GHz totals 1317 Mbps Wi-Fi speeds. - Integrated into Omada SDN: Zero-Touch Provisioning (ZTP), Centralized Cloud Management, and Intelligent Monitoring. - Centralized Management: Cloud access and Omada app for ultra convenience and easy management. - Seamless Roaming: Even video streams and voice calls are unaffected as users move between locations. - PoE Support: Support both standard 802.3af/at and Passive PoE (PoE adapter is not included) for flexible installations. - Secure Guest Network: Along with multiple authentication options (SMS/Facebook Wi-Fi/ Voucher, etc.) and abundant wireless security technologies. - Advanced Wireless Tech: Optimize network performance with MU-MIMO, Band Steering, Airtime Fairness and Beamforming technologies. EAP223 Type Wireless Access Point, Data transmission speed 1350 Mbps IEEE 802.11a, IEEE 802.11b IEEE 802.11g, IEEE 802.11n IEEE 802.11ac, 1x10/100/1000M Antenna Type Omni-Directional, Number of antennas 3 Wireless Frequency Range 2.4 GHz and 5 GHz, Wireless Transmit Power 24 dBm Included Accessories Mounting Kits,Installation Guide., Dimensions 205.5 × 181.5 × 37.1 mm)
The DGS-1210 Series Gigabit Smart+ Switches with Fiber Uplinks is the latest generation of D-Link Gigabit Smart+ Switches with Fiber Uplinks featuring D-Link Green 3.0 technology. The series offers a high level of energy saving and efficiency, as it also complies with the IEEE 802.3az Energy Efficient Ethernet standard. IPv6 Ready Logo Program Approved, support for IPv6 management and configurations ensures your network remains protected after the upgrade from IPv4 to IPv6. By offering multiple management options, the Gigabit Smart+ Switches with Fiber Uplinks allows quick deployment, infrastructure expansion, and seamless function upgrades. Built for small and medium-sized businesses, the DGS-1210 Series Gigabit Smart+ Switches with Fiber Uplinks provide functionality, security, and manageability for a fraction of the standard cost of ownership. The DGS-1210 Series Gigabit Smart+ Switches with Fiber Uplinks includes a range of high power budget PoE-enable switches for businesses looking to power VoIP phones, wireless access points or network cameras.
MS108GP 8-Port Gigabit Desktop Switch with 7-Port PoE+ - Full Gigabit Ports: 8× 10/100/1000 Mbps RJ45 ports - Two Cables in One: With 7 PoE+ ports, transfers data and power on one single cable - High Power PoE+: Support PoE Power up to 30 W for each PoE port and 65 W for all PoE ports - Long-Range up to 250 m: Increases PoE transmission distance to 250 m by Extend Mode - Isolation Mode: One click to divide traffic for specific ports for stability and security - Compliant with Powered Devices: Works with IEEE 802.3af/at compliant PDs - Durable Metal Casing: Allows for efficient heat dissipation and long network life - Plug and Play: Simple to use and saves time and effort
Desktop switch, 16 gigabit ports, including 16 PoE+ ports 16 Gigabit RJ45 ports 16 PoE+ ports, power and data transfer via one cable Compatibility with PoE-powered devices operating in IEEE 802.3af/at standards. Up to 30 W of PoE power on each PoE port PoE power supply support up to 120W for all PoE ports Up to 250m of data and power transmission in Extend mode Priority mode provides high priority for ports 1-4 Isolation Mode enables one-click separation of client traffic for improved security and performance. Automatic restart of PoE-powered devices that are dead or unresponsive thanks to the PoE Auto Recovery function. Plug and play connection, no configuration or complicated installation required. Dedicated 16 PoE+ ports (120 W budget) for many applications Compatibility with the 802.3af/at PoE+ standard provides up to 30 W of power on each PoE port. A total PoE power budget of 120W* for 16 PoE+ ports opens up a wide range of applications such as surveillance in offices, dorms and small businesses. It is fully compatible with IP cameras, access points, IP phones, computers, printers and more Perfect for monitoring - Up to 250 m of transmission Thanks to the Extend mode, the transmission distance can reach up to 250m, perfect for installing IP cameras in large areas. Auto lifting system with PoE Auto Recovery The switch automatically detects and restarts PoE-powered devices such as cameras and access points when they stop working or become unresponsive, ensuring stable device operation without the need for manual monitoring and restarting. Intelligent power management When total power consumption exceeds 120W, Intelligent Power Management turns off power to the lowest priority port to provide power to higher priority ports and thus protect the device from overload. It also enables automatic detection of the PoE power required by a given device and protects non-PoE devices from damage. Durable metal housing The internal components of the TL-SG116P switch are protected by a high-quality metal housing ensuring a long product life. After passing a series of rigorous reliability tests, the TL-SG116P delivers switching performance you can rely on.
For him, power is not a problem: a simple and functional LANBERG POE+ switch The PoE+ switch is an indispensable active device in any network structure that uses power transmission over structured cabling. The RSGE-24P-2GE-2S-250 is dedicated to all installations: home, business, low-current, monitoring, IP, VoIP, cable TV networks, and in particular finds use in alarm, fire and access control infrastructures. In addition to the primary function of the switch, i.e. handling Ethernet frame traffic between ports, it additionally provides power to each device in the PoE/PoE+ 802.3af and at standards. This makes it possible to supply up to 250 W total power to devices. And all this together with simultaneous data transmission to them. This saves resources, space and the time it would take to install a separate electrical and network installation. This is particularly important if the network is dispersed and its end devices do not have access to a power source, even more so if they are mounted outdoors. No-compromise solution - viable POE budget: 250 W The switch is equipped with a total of 28 ports, including 24 PoE+ (Gigabit Ethernet), 2 Uplink (Gigabit Ethernet) and 2 Uplink (SFP Gigabit) ports. Thoughtful design and attention to component quality provides the user with up to 250 W of total real power for end devices, which means that up to: 16 IEEE 802.3af devices (max. 15 W per port) or, 8 IEEE 802.3at devices (max. 30 W per port), The remaining 4 Uplink ports (2xGigabit Ethernet and 2xSFP Gigabit) operate independently and can operate simultaneously. They are dedicated to the exchange of data traffic between the 24 PoE+ ports and external devices. In the case of monitoring/control systems, this is particularly useful, as it allows the user to rip camera recordings to the DVR while simultaneously sharing the stream further (on the second port), e.g. on the local network or on the Internet. Intelligent POE port disconnection function It is not always entirely clear how a switch will behave when the available PoE budget is exceeded. There are several possibilities: the port that exceeds the budget will be disconnected, or a random port or the most recently connected port will be disconnected. In the last case, what will be their order after a power outage and its restoration when they are all plugged into the switch at the same time? Lanberg has introduced an innovative solution in the RS series switches which, through the simplicity of the operating principle, eliminates any doubt about the mechanics of the ports. When the PoE budget is exceeded (e.g. by a device connected to port 1), the switch will start disconnecting PoE ports starting from the highest numbering until the sum of loads exceeds the available budget; while keeping the operation of the other ports intact. Those that are disconnected will remain in this state until the PoE load decreases. The function is primarily dedicated to demanding applications that emphasize safety and business continuity, where some devices must operate without interruption regardless of the situation. In such cases, Lanberg switches will allow the user to protect sensitive devices by connecting them to the lowest numbered ports. EXTEND mode up to 250 meters Standard switches, in accordance with the standard, provide the ability to operate devices at a distance of up to 100 m on one cable section. However, sometimes, due to the extensive backbone and complex environment, a custom solution that goes beyond the standard is required when developing cabling and networking. In the case of monitoring solutions, this is a fairly common problem, most often resulting from too great a distance between the distribution device and the end device. Lanberg switches have a function that enables data transmission (max. 10 Mbps) and PoE+ power supply up to 250 m on one cable section. Simply switch the button to the PoE+ Extend 250m position on the case to provide extended operation for ports 1 ~ 24. The solution has been introduced for monitoring and IP systems as well as access control, especially if end devices are located outside without the possibility of installing additional network distribution points. 4 kV surge protection The switch itself, as well as the devices connected to it, are repeatedly exposed to various threats, including electric discharges that can flow through both power and network cables. Bearing in mind the safety of devices and their users, Lanberg equipped the switch with an integrated protection system against discharges, guaranteeing 4 kV protection for all ports, effectively reducing their damage due to rapid voltage increase. Under standard conditions, the network will continue to work without interruptions, the switch will continue to work without any interruptions, and the user gains the security of the device and infrastructure. Mounting kit included - ears up to 19" The RS series of switches is characterized not only by the quality of workmanship, ease of use, functionality of the device, but also complementarity in terms of assembly and supplied accessories, where possible. Lanberg has introduced a set of accessories for versatile assembly of its switches. The RSGE-24P-2GE-2S-250 includes mounting ears for cabinets 19 and a set of mounting screws (except M6). This enables a wider application and greater freedom of installation of the RS series switches.
FS1010P 8-Port 10/100M PoE+ Switch with 2 Uplink Ports Supports IEEE802.3at and IEEE802.3af Total PoE output power 120W, up to 32W for one PoE port Support IEEE802.3x full duplex and half duplex flow control Support VLAN and CCTV functions Panel LEDs to monitor operating status and assist in fault analysis Perfect security mechanism
EAP113-Outdoor Wireless, outdoor access point, N300 standardPerfect for outdoor environments: The access point has an IP65-rated housing. Fast Wi-Fi: Wi-Fi speeds reach up to 300Mbps thanks to 2×2 MIMO technology. Long range: High-power amplifier and professional antennas. Omada SDN Integration: Centralized Cloud Management and Intelligent Monitoring. Central management: Cloud access and the Omada application ensure easy and convenient management. PoE support: Support of the 802.3af standard and 48V Passive PoE allows easy installation. Secure Guest Network: Multiple access authentication methods (SMS/Voucher, etc.) and extensive wireless security technologies. Top-class design Thanks to the well-thought-out design of the housing, antennas and flexible power supply and installation options, EAP113-Outdoor is perfect for both inside and outside any building. Detachable antennas EAP113-Outdoor has two detachable omnidirectional antennas, which allows them to be easily replaced if necessary. Long-distance data transmission High transmission power and two powerful omnidirectional antennas make EAP113-Outdoor provide a stable wireless network with a range of up to 200m when located outside the building. Waterproof case designed for outdoor environments The IP65 certificate obtained during testing guarantees that the access point will withstand even the harshest weather conditions. Integration with the Omada SDN platform The Omada Software Defined Networking (SDN) platform integrates network devices such as Access Points, Switches and Routers to provide 100% centralized cloud management and a highly scalable network managed from a single interface. Easy management with the Omada app With easy-to-follow instructions, it only takes a few minutes to configure the settings you need in the Omada app. Monitor the network status, manage clients, change settings at any time, all from your smartphone or tablet.
