SpecificationsOutput Voltage 24VOutput Rating 0.5A (12W)Input Voltage AC 100~240VInput Frequency 50~60HzOperating Temperature 0C~+40CStorage Temperature -20C~+85C
Netgear 5 x 10/100/1000 Platinum Ethernet Switch, Lifetime Hardware Warranty Type Ethernet Switch Modem speed 10/100/1000 Mbps Gigibit Ethernet I/O ports 5 Ports Connector type Plastic LED Power, Link/Activity Form Factor Desktop or wall-mountable Noise 0 dBA (Fanless) Power 5V / 0.7A DC Power Adapter Power consumption 2.34 W Max. Features Energy Efficient Ethernet Support (IEEE 802.3az); 9,216 bytes Jumbo Frame Support; 2K MAC table; 1 Mbit Packet buffer; MTBF (@ 25° C): 1,386,257 hours; Electromagnetic compliance: Class B Dimensions 118 x 73 x 30 mm Weight 0.10 kg
OmniTik 5 PoE ac features five Gigabit Ethernet ports and support for 802.11ac. It’s equipped with a powerful 720MHz CPU, 128MB RAM, high power 1,300mW 802.11a/n/ac Dual Chain wireless (support for AC as well as backwards compatible with regular 802.11a/n CPE) and comes with a new design weatherproof outdoor enclosure, two integrated 7.5dBi 5GHz omni antennas, a power supply, a PoE injector and a mounting kit. It also supports passive or standard 802.3at/af PoE input/output (12v-57v). Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! It can power 48V devices (like IP camera), if 48V input is used. OmniTik 5 PoE ac (International) supports 5150MHz-5875MHz range.
We’re thrilled to announce the release of the newest product in the Fibaro family, the Dimmer 2!Expanding on the success of the Dimmer, the Dimmer 2 has some amazing new features – including:- Adaptive, self-calibrating dimming (supports leading and trailing edge lamps)- Power Metering- 2-Wire compatible (no neutral required)- Z-Wave 500 series chip- Z-Wave Plus Certified- Build-in Configuration LED- New larger, more secure screw terminalsTüüpDimmerKarbikujundusEraldiseisevToote värvMustKorpuse värvMust
Using airMAX ac technology, the PBE-2AC-400 supports up to 330+ Mbps real TCP/IP throughput. Management Wi-Fi Radio The PowerBeam® 2AC 400 integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.Improved Mounting and Surge Protection Featuring enhanced protection against ESD events, the PowerBeam® 2AC 400 offers a more robust mount with a convenient lifting loop or handle.Integrated Radio Design Ubiquiti’s InnerFeed® technology integrates the radio into the feedhorn of an antenna, so there is no need for cables to connect the radio to the antenna. This improves performance because it eliminates cable losses.Plug and Play Installation The PowerBeam® 2AC 400 requires no tools for assembly; only a single wrench is required for pole-mounting. Performance Breakthrough airMAX® ac products offer improved latency, noise immunity, scalability and significantly increased throughput performance.
The LHG mount is a basic pole mount adapter for LHG series products.• Simple and low cost.• Supports all LHG series, products, including LHG XL.• Made from metal.• Package also includes a U-bolt and a K-58 mounting kit.
TRB family devices are designed to be small, lightweight and energy efficient - allowing you to do IoT projects with ease. TRB142 comes with widely used RS232 port for remote device management. It contains a high performance ARM Cortex-A7 1.2GHz processor and 128 megabytes of RAM. It is equipped with mission-critical LTE capabilities and a Linux environment offering high degree of customization.HardwareMobileLTE(Cat1)/3G/2GCPUARM Cortex-A7 1.2 GHz CPURAM128 MBytes (50 MBytes available for userspace)Flash512 MBytes (70 MBytes available for userspace)Power connector4 pin industrialSIM slotMini SIM (2FF)Antenna connectors1 x SMA for LTELEDsPower, signal, network and data statusRS232 connectorDB9 socket, 5 pin configuration with flow controlOtherMicro-USB connector, Reset buttonSecurity/SW featuresNetworkingFirewall, NATRS232 related servicesModbus, Serial over IP, NTRIPRemote ManagementRMS Support, FOTA support, SSH, CLI, SMS UtilitiesAdditional featuresUSB virtual network interface, Input/OutputElectrical, Mechanical & EnvironmentalInput voltage9 - 30 VDCOperating temperature-40° C to 75° CStorage temperature-45° C to 80° COperating humidity10% to 90% non-condensingStorage humidity5% to 95% non-condensingDimensions60 mm x 70 mm x 18 mmWeight50 gMobileLTE(Cat1)/3G/2GCPUARM Cortex-A7 1.2 GHz CPURAM128 MBytes (50 MBytes available for userspace)Flash512 MBytes (70 MBytes available for userspace)Power connector4 pin industrialSIM slotMini SIM (2FF)Antenna connectors1 x SMA for LTELEDsPower, signal, network and data statusRS232 connectorDB9 socket, 5 pin configuration with flow controlOtherMicro-USB connector, Reset buttonSecurity/SW featuresNetworkingFirewall, NATRS232 related servicesModbus, Serial over IP, NTRIPRemote ManagementRMS Support, FOTA support, SSH, CLI, SMS UtilitiesAdditional featuresUSB virtual network interface, Input/OutputElectrical, Mechanical & EnvironmentalInput voltage9 - 30 VDCOperating temperature-40° C to 75° CStorage temperature-45° C to 80° COperating humidity10% to 90% non-condensingStorage humidity5% to 95% non-condensingDimensions60 mm x 70 mm x 18 mmWeight50 g
Remove the bottleneck from your network setup – it is time to upgrade that 1 Gigabit switch to something truly powerful and enjoy real speed. Introducing CRS312-4C+8XG-RM – our first product with 10G RJ45 Ethernet ports. Moreover, it also has 4 x 10G combo ports: use them for 10G RJ45 Ethernet or 10G SFP+, when you need an additional fiber connection. Combo ports can be used alongside the 8 regular 10G RJ45 Ethernet ports at all times. These ports can also be software selected, so you can use RouterOS scripting, to decide which combo ports will be active.This device is a practical solution for those who work with huge data files and need fast, capable connection 24/7: multimedia production, scientific research, game development, big data analysis and so on. CRS312-4C+8XG-RM has a dual power supply for redundancy – no unexpected downtime when the deadlines are looming. It has a full size USB, a console port for configuration and a 1U rackmount case – fits all the standard racks.You can choose between our legendary feature-packed RouterOS for booting or a simpler, but still powerful SwOS. If you would like the ability to use routing and other Layer 3 features in your CRS, use RouterOS.This switch has a great total non-blocking throughput of 120 Gbps, switching capacity of 240 Gbps and forwarding rate of 178 Mpps. CRS312-4C+8XG-RM – built for professionals, great for everyone!
Tootja: Lanberg Tootegrupp: Patchcord võrguseade kaabel Wiring type: CAT5E pikkus: 3 m Category: 5e 1-ühenduse tüüp: 1 x RJ45 male 2-ühenduse tüüp: 1 x RJ45 male Cross-Over: Jah värv: hall
Universal 2in1 crimping tool and cable testerThis professional crimping & testing tool is designed for RJ45 and RJ11 plugs; has a twisted-pair tester built into the cradle's handles to disconnect one part of the tester from the crimper;Prowered by 4xLR44 batteries - not included;Technical data:enables clamping of modular plugs:RJ45 - 8p8cRJ11 - 6p2cRJ12 - 6p6cRJ14 - 6p4cknives for cutting wiresknives for removing external insulation (flat cables)
RayAIM-DH1 is an alignment and aiming attachment for the nRAY. Use it to attach a scope of your choice for even greater precision and easier installation of the Wireless Wire nRAY.
Industrial-grade Ethernet cable that protects your network from elemental and electrostatic damage.The UISP-Cable-Pro is a Category 5e cable with a highly insulating weatherproof jacket that prevents damage from rain snow and other extreme climatic conditions. The cable is also fortified with internal foil shielding and a drain wire that collectively shield it from electrostatic discharge (ESD) and allow it to maintain Gigabit Ethernet link rates even when electromagnetic interference is present.
The dual port QXG-10G2T-X710 is a PCIe Gen 3 (compatible with PCIe Gen 2)10GbE network expansion card with an Intel Ethernet Controller X710 and supports up to five speeds (10G / 5G / 2.5G / 1G / 100M). By using Port Trunking, both ports can be combined to achieve up to 20Gbps transfer speeds for accelerating file sharing and intensive data transfer. With SR-IOV and iSCSI support, the QXG-10G2T-X710 greatly boosts network efficiency and is ideal for I/O-intensive and latency-sensitive virtualization applications and data centers.
The MikroTik 100 Gigabit product line keeps growing: QSFP28 module for distances up to 100m MikroTik 100 Gigabit product line keeps growing: QSFP28 module for distances up to 100m Add this QSFP module for distances up to 100 meters to your CCR2216, CRS504 or CRS518 setups and enjoy real speed and ultimate reliability. This optical module offers four independent full-duplex channels with up to 25 Gbps per channel bandwidth and an aggregate bandwidth of 100 Gbps. The module has built-in digital diagnostic functions such as optical power monitoring.
> Layer 2 management PoE switch > Intelligent PoE > Red port supports 90W IEEE802.3bt > Web management with friendly interface and easy operation > 250 m long distance PoE transmission > PoE watchdog > Plug and play Communication Standard: IEEE802.3; IEEE802.3u; IEEE802.3x; IEEE 802.3ab; IEEE 802.3z PoE Standard: IEEE802.3af/ IEEE802.3at/ Hi-PoE/IEEE802.3bt Port 1-16: 16 × RJ-45 10 M/100 M (PoE) Port 17-18: 2 × RJ-45 10 M/100 M/1000 M (uplink) Port 17-18: 2 × SFP 1000 M (uplink) (combo) PoE Budget: Port 1-2 ≤ 90W, Port 3-16≤ 30W, total ≤ 240W
The effective connection distance is 100 meters on Cat5e/Cat6 cable. The solution is small but very effective. The DN-95132 is an active indoor PoE midspan injector power supply designed specifically for complex backhaul and networking applications. Provides 52 V DC, 0.58 A power for external devices requiring PD power through 2 pairs of output sockets. The solution supports both 10/100 Base-T and Gigabit compatible devices. The solution works with devices that support PD PoE with a power of 30 W, such as wireless access points, WLAN routers, network cameras, IP phones, radio devices and other end devices compatible with power over Ethernet. The solution is fully compliant with the PoE IEEE802.3af standard. The device has a plastic housing protected against fire with a protection level of IP40. The solution supports a wide input voltage range of 100-240 V AC, 50 or 60 Hz. It has a detection chip inside that recognizes and classifies a power-demanding device (PD) before power is supplied to that device. Provides power only when a device supporting the PD (Power Delivery) standard is detected. provides 52 V DC, 0.58 A power for external devices requiring PD power through 2 pairs of output sockets support for both 10/100 Base-T and Gigabit compatible devices the solution supports a wide input voltage range of 100-240 V AC, 50 or 60 Hz Easy-to-use combination of power and data cables in one cable Each output port offers output current limit function, short circuit protection, full powered device detection and classification (PD) Injector can be used regardless of the operating system
Mi Range Extender Pro Wi-Fi Signal Booster 300 Mbps Provides reliable and extremely fast network performance with powerful 802.11n Wi-Fi technology. Up to 24 devices To maintain the best performance, it is recommended to connect up to 24 devices. Easy setup Connecting to the router is very convenient thanks to the Mi Home app. This is even easier with Mi routers. Flexible deployment Once connected to your router, you can simply disconnect and reconnect the amplifier in the location that gives you the best signal quality and coverage. Eliminate the blind spot Wirelessly connects to your router to boost and extend your signal to hard-to-reach areas. 2 external antennas 2 external antennas with advanced connection technology to achieve reliable Wi-Fi coverage throughout your home or office.
