Low-cost passive PoE base unit for powering passive PoE devices over ethernet. Simply connect your power source to the injector, and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead up the tower, and in other situations. For using with RouterBOARDS that support 10-28V PoE powering, input needs to be at least 18V to accomodate any losses in cables.
Cambium Networks’ ePMP product line has set the standard for high performance, scalability and reliability in harsh interference environments all at a compelling price. The ePMP 3000 is the third generation access point (AP) that carries on the interference tolerance mechanisms from ePMP 2000 but adds the power of Multi-UserMIMO (MU-MIMO). The ePMP 3000 is a 4X4 MU-MIMO access point that can double the throughput at the sector level with the same channel bandwidth by serving two subscribers at the same time. In addition, the ePMP 3000 continues interference mitigation techniques with support of the beam steering antenna for uplink, dynamic filtering for neighboring channel interference, and the robust software from the ePMP product line. The ePMP 3000 AP system consists of the ePMP 3000 AP, a 4X4 sector antenna, optional beam steering antenna and a 25 dBi and 16 dBi subscriber modules. The ePMP 3000 system boasts high packet per second performance, peak throughput of 1.2 Gbps and supporting subscriber modules with 600 Mbps of peak throughput.• Frequency Reuse: Supports GPS synchronization and SM Transmit power control to allow for frequency re- use.• Unmatched Performance and Scalability: With the efficient Cambium Networks MAC protocol and advanced air-fairness scheduler up to 120 simultaneously active subscriber modules can be served without performance degradation.• Industry-Leading Interference Tolerance: The intelligent filtering capability on the receive side makes the ePMP 2000 immune to the effects of strong off-channel interferers and on the transmit side serves to reduce off-channel noise for better radio co-location.• Industry-Leading Spectral Efficiency: MU-MIMO in the downlink doubles the sector capacity by serving two MIMO users at the same time.
ASUS USB-AX56. Ühenduvustehnoloogia: Juhtmevaba, Hostiliides: USB, Liides: WLAN. Andmete edastamise maksimaalne määr: 1775 Mbit/s, Wi-Fi laineala: Kaks sagedusala (2,4 GHz / 5 GHz). Toide USB kaudu. Toote värv: Must, Kuld
Rocket® Prism access points incorporate high-performance airMAX ac and airPrism technologies for maximum performance of wireless networks in high-density areas. 2.4GHz Rocket, no doesn’t operate from 2.3 to 2.7GHzIncorporates GPS for PtP synchronization with another R2ACFor PtP with another R2AC, it is much quicker than the older RM2.Supports retro-compatibility with the following: LOCOM2, NSM2, AG-2G, NBE-2G, PBE-M2, RM2, on “Mixed PtMP”Advantages: Much faster processor, Less latency and higher amount of real MbpsReplaces: RM2(in certain applications) 2.4 GHz Coverage The Rocket® Prism 2 AC covers the full 2.4 GHz radio.Revolutionary Filtering TechnologyUbiquiti’s patented airPrism technology provides breakthrough radio selectivity in unlicensed wireless band performance. airPrism technology isolates signals within the operating channel to increase capacity and throughput in co-location deployments.Designed for High PerformanceThe Rocket Prism 2 AC features EMI-shielded metal housing, GPS, airPrism circuitry, and the airView® real-time spectrum analyzer to deliver maximum spectral efficiency/throughput. Now with airOS®8 airOS®8 provides powerful features, including airMAX® ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.2.4GHz Rocket, no doesn’t operate from 2.3 to 2.7GHzIncorporates GPS for PtP synchronization with another R2ACFor PtP with another R2AC, it is much quicker than the older RM2.Supports retro-compatibility with the following: LOCOM2, NSM2, AG-2G, NBE-2G, PBE-M2, RM2, on “Mixed PtMP”Advantages: Much faster processor, Less latency and higher amount of real MbpsReplaces: RM2(in certain applications)
This spiral hose by Delock can be used to bundle exposed cables and protects them from dirt or damage. Simple mounting The delivery content includes a pulling tool, which allows easy threading of the cables. Reusable The cables can be easily added or removed. Multifunctional application The spiral hose can be used in the office or at home, to ensure an orderly and clearly cable installation. Note The spiral hose should be loosened beforehand by first pulling the pulling tool through the hose without cable. The pulling tool can then be pulled through the spiral hose with the cables more easily. Specification • Length: ca. 2.5 m • Diameter: ca. 20 mm • Reusable • Material: PE • Colour: white Package content • Spiral hose • Pull-in tool
Indoor versionLonger 48V cable runs capable because of increased efficiency of power delivery (less current)Additional +/-15kV of ethernet isolation and ESD/Surge protection to deviceWorks seamlessly with Cisco Catalyst and other 802.3af Switches for remote power control
