Võrguseadmed

Control several multi-video enabled PCs from a single keyboard, mouse and bank of video monitors. High quality video with DDC support and resolutions up to 1920 by 1440 pixels. Dual and quad video head models available with two and four computer ports. Computer selection via keyboard hotkeys, mouse, front panel key, RS232 or remote controller. SmartBoot enables simultaneous bootup of all computers. Software independent operation ensures very wide compatibility. Reliably draws power from the attached PCs avoiding the need for an extra power supply. Flash upgradeable for future device support and enhancements. Excellent for banking, security and engineering applications. Cascadeable to support more than four computers. Hardware compatible with desktop and laptop PCs, RS6000, SGI and DEC Alphas. May be linked together to synchronously switch up to sixteen monitors.

Kattepaneel 19" kapile, halli värvi.

Control several multi-video enabled PCs from a single keyboard, mouse and bank of video monitors. High quality video with DDC support and resolutions up to 1920 by 1440 pixels. Dual and quad video head models available with two and four computer ports. Computer selection via keyboard hotkeys, mouse, front panel key, RS232 or remote controller. SmartBoot enables simultaneous bootup of all computers. Software independent operation ensures very wide compatibility. Reliably draws power from the attached PCs avoiding the need for an extra power supply. Flash upgradeable for future device support and enhancements. Excellent for banking, security and engineering applications. Cascadeable to support more than four computers. Hardware compatible with desktop and laptop PCs, RS6000, SGI and DEC Alphas. May be linked together to synchronously switch up to sixteen monitors.

Built in KVM over CATx extender transmitters to control switch up to 200m away Optional redundant power supply Advanced On Screen Display - up to 16 different passwords and user profiles can be stored on the SmartView XPro Flash upgradeable firmware - as new drivers are released, free upgrades can be downloaded from the Adder website. Front panel keys - used for selecting users and channels manually. Also used for selecting auto-scan. Front panel display - 7 Segment display (red) shows the currently selected CPU. 7 Segment display (green) shows the currently selected user. Indicators show keyboard and mouse activity. Selection methods - convenient switching using On Screen Display menu, selectable keyboard hot-key, 3 button mouse, front panel key or RS232 serial control. Hot connection of devices - can be connected to many running PCs without reboot by using the keyboard and mouse reset feature. On the fly configuration - the SmartView XPro can be configured using the OSD menu. User definable hot-key commands can be used for quick channel selection. Expandable - where the size of your installation is beyond the scope of a single SmartView XPro, additional units can be cascaded. This will allow you to use multiple units to provide a video-switching network. Auto-scan - the SmartView XPro can be set to automatically scan all ports or all active ports at a user definable rate. Automatic mouse conversion - PS/2, IntelliMouse and RS232 type mice are all supported between switch and CPUs. Controlling mouse/trackball is PS/2 type. Mouse control of OSD menu. Name search facility in OSD menu. Users may select exclusive or shared computer access. Keyboard and mouse reset features for each user port. Optional CPU reminder banner may be transparent and moved around the screen. Upload and download of OSD configurations to a PC file or Excel spreadsheet. Cascaded units do not need to be configured.

A choice of 4 and 8 port models Self powered operation simplifies installation Mixed PS/2 and AT/ RS232 keyboards and mice supported Easy channel switching from On Screen Display menu, front panel, mouse, optional remote control, RS232 serial or keyboard hot-key Can be used as a rack mount or desktop switch Cascadable to support up to 300 PCs High video quality and screen resolution up to 1900 x 1440 Compatible with all major software including DOS, Windows 3.x/95/98/NT/2000, Linux, Unix and Netware All metal construction KVM switch designed and manufactured in the UK

High Definition VGA with extended profile DDC EDID The AdderView Pro Multi Screen features high resolution VGA video with extended profile DDC EDID. The extended DDC EDID profile ensures that the switched graphics card is always optimised to work with your screen. The VGA capabilities enable users to work at very high resolutions including WUXGA (1920 x 1200) or (1920 x 1440) on each head for resolution intensive applications such as media/graphic design or detailed medical imaging. True Emulation USB2.0 technology The AV4PRO-VGA-MS belongs to the first KVMA range of switches to feature Adder's advanced True USB Emulation technology. Emulated USB provides an instantaneous and reliable switching action and makes keyboard hotkey and mouse switching possible. Previous implementations have used generic emulations and consequently have only been able to support the most basic keyboard and mouse features. Adder's revolutionary True Emulation technology overcomes this frustrating limitation by emulating the true character of the connected devices to all the computers simultaneously. This means that you can now use the extra function keys, wheels, buttons and controls that are commonly found on modern keyboards and mice. With the AV4PRO-VGA-MS, a whole new group of users can take advantage of the flexibility KVM switches have to offer. Users in Architecture, Graphic Design, Post Production, Animation, Medical Imaging etc. often need to use specialised interface devices such as graphics tablets, 3D explorers, joysticks, and so on. The AV4PRO-VGA-MS makes all this possible. Independent simultaneous device selection Flexibility is key to the AdderView Pro. The switch enables you to use the KVMA console to work on one computer whilst your USB peripherals are connected to other computers and your speakers are playing music from yet another. You can of course still switch all connected devices to any one of the connected computers as with any other KVM switch. Channel selection options The AdderView Pro can be switched using s

Two Keyboard Video monitor and Mouse ports allow simultaneous access. A choice of 8 and 16 port models are available all of which can be desk or rack mounted. Matrix firmware can be Flash upgraded. Cascade Matrix to support up to 500 PCs from one OSD database. Exceptionally high video quality with screen resolution up to 1900 x 1440. DDC compliant monitor ports. Standard PC99 specification colour coded connectors reduce cabling costs. Mixed PS/2, wheel mice and AT/ RS232 keyboards and mice supported. Channel selection via On Screen Display menu, front panel, mouse, user selectable hot-key combinations or RS232 control. OSD menu supports up to 16 different user access profiles. Compatible with all major software including DOS, Windows 3.x/95/98/NT/2000/ME/XP, Linux, Unix and NetWare.

USB keyboard and mouse support enables users to choose the most suitable keyboard style Control Sun, Mac or PC computers from a common KVM console Intelligent cables connect to USB, Sun(8-pin), PS/2 and AT/RS232 style computer ports Two simultaneous users may access computers independently Advanced on-screen display makes set-up and control easy Compatible with all major software including Windows 3.X, NT, 2000, 95, 98, XP, ME, DOS, Linux, Mac OS, Sun OS, Unix and NetWare High (1900x1440) video quality with DDC support Rack mountable in a standard 19 inch rack

Features and Benefits   IEEE 802.3af compliant, splits power and data from PoE equipment Supports output power up to 12.95 W at 24 VDC Short circuit protection for power output Auto disconnection if power input voltage is too high -40 to 75°C operating temperature range (T model) DIN-Rail mounting ability   Introduction With the technology of PoE, we can transfer both data and electrical power to Ethernet-enabled devices using a standard Ethernet CAT5 cable. SPL-24 plays the role of powered devices (PD) and splits power from PoEto Ethernet devices. In this case, both power and data can be transmitted up to 328 feet (100 m) from power source equipment (PSE). This product can operate from 0 to 60°C or -40 to 75°C for T model, and the rugged hardware design makes SPL-24 perfect for ensuring your PoE Ethernet equipment can meet demanding industrial applications.

Features and Benefits   IEEE 802.3af compliant, splits power and data from PoE equipment Supports output power up to 12.95 W at 24 VDC Short circuit protection for power output Auto disconnection if power input voltage is too high -40 to 75°C operating temperature range (T model) DIN-Rail mounting ability   Introduction With the technology of PoE, we can transfer both data and electrical power to Ethernet-enabled devices using a standard Ethernet CAT5 cable. SPL-24 plays the role of powered devices (PD) and splits power from PoEto Ethernet devices. In this case, both power and data can be transmitted up to 328 feet (100 m) from power source equipment (PSE). This product can operate from 0 to 60°C or -40 to 75°C for T model, and the rugged hardware design makes SPL-24 perfect for ensuring your PoE Ethernet equipment can meet demanding industrial applications.

Features and Benefits   PoE injector for 10/100/1000 Network, Inject power and data to PD (Power Device) Equipment IEEE 802.3af/at compliant, supports full 30 watts output 24/48 VDC wide range power input -40 to 75?C operation temperature range (T models) Introduction   The INJ-24 is an IEEE 802.3at PoE+ injector that combines power and data and delivers them to a powered device over one Ethernet cable. Designed for power-hungry devices, the INJ-24 injector provides up to 30 watts, twice as much as conventional PoE injectors. It also supports 24/48 VDC power inputs for power redundancy and operational flexibility. The -40 to 75?C wide temperature range design makes the INJ-24 perfect for operating in critical industrial environments.

Features and Benefits  4 IEEE 802.3at compliant PoE and Ethernet combo ports Up to 30 watts at 24/48 VDC per PoE port Intelligent power consumption detection and classification Redundant dual VDC power inputs -40 to 75°C operating temperature range (T models)   Introduction The EDS-P206A-4PoE switches are smart, 6-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-P206A-4PoE switches enable centralization of the power supply and provide up to 30 watts of power per port. The switches can be used to power IEEE 802.3at compliant powered devices (PD), eliminating the need for additional wiring, and support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical solution for your industrial Ethernet network. In addition, the built-in relay warning function alerts network engineers when power failures or port breaks occur.

Features and Benefits  4 IEEE 802.3at compliant PoE and Ethernet combo ports Up to 30 watts at 24/48 VDC per PoE port Intelligent power consumption detection and classification Redundant dual VDC power inputs -40 to 75°C operating temperature range (T models)   Introduction The EDS-P206A-4PoE switches are smart, 6-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-P206A-4PoE switches enable centralization of the power supply and provide up to 30 watts of power per port. The switches can be used to power IEEE 802.3at compliant powered devices (PD), eliminating the need for additional wiring, and support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical solution for your industrial Ethernet network. In addition, the built-in relay warning function alerts network engineers when power failures or port breaks occur.

Features and Benefits  4 IEEE 802.3at compliant PoE and Ethernet combo ports Up to 30 watts at 24/48 VDC per PoE port Intelligent power consumption detection and classification Redundant dual VDC power inputs -40 to 75°C operating temperature range (T models)   Introduction The EDS-P206A-4PoE switches are smart, 6-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-P206A-4PoE switches enable centralization of the power supply and provide up to 30 watts of power per port. The switches can be used to power IEEE 802.3at compliant powered devices (PD), eliminating the need for additional wiring, and support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical solution for your industrial Ethernet network. In addition, the built-in relay warning function alerts network engineers when power failures or port breaks occur.

Features and Benefits  4 IEEE 802.3at compliant PoE and Ethernet combo ports Up to 30 watts at 24/48 VDC per PoE port Intelligent power consumption detection and classification Redundant dual VDC power inputs -40 to 75°C operating temperature range (T models)   Introduction The EDS-P206A-4PoE switches are smart, 6-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-P206A-4PoE switches enable centralization of the power supply and provide up to 30 watts of power per port. The switches can be used to power IEEE 802.3at compliant powered devices (PD), eliminating the need for additional wiring, and support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical solution for your industrial Ethernet network. In addition, the built-in relay warning function alerts network engineers when power failures or port breaks occur.

Features and Benefits Full-gigabit Ethernet ports IEEE 802.3af/at, PoE/PoE+ standards  Up to 30 watts output per PoE port 24/48 VDC flexible redundant power inputs Intelligent power consumption detection and classification Smart PoE over current and short circuit protection -40 to 75°C operating temperature range (T models)  Introduction The EDS-G205A-4PoE switches are smart, 5-port, unmanaged full-gigabit Ethernet switches supporting Power-over-Ethernet on ports 2 to 5. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-G205A-4PoE switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE 802.3af/at standard devices (PD), eliminating the need for additional wiring, and they support IEEE 802.3/802.3u/802.3x with 10/100/1000M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical high-bandwidth solution for your industrial Ethernet network.

Features and Benefits Full-gigabit Ethernet ports IEEE 802.3af/at, PoE/PoE+ standards  Up to 30 watts output per PoE port 24/48 VDC flexible redundant power inputs Intelligent power consumption detection and classification Smart PoE over current and short circuit protection -40 to 75°C operating temperature range (T models)  Introduction The EDS-G205A-4PoE switches are smart, 5-port, unmanaged full-gigabit Ethernet switches supporting Power-over-Ethernet on ports 2 to 5. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-G205A-4PoE switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE 802.3af/at standard devices (PD), eliminating the need for additional wiring, and they support IEEE 802.3/802.3u/802.3x with 10/100/1000M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical high-bandwidth solution for your industrial Ethernet network.

5-Port 10/100Mbps with 1 PoE Ports, Stand-alone, Unmanaged PoE Switch, 5 10Base-T/100Base-TX ports (Ports 1 are PoE ports, Ports 2-5 are non-PoE ports), Complies to 802.3af Power over Ethernet standard, PSE pin-out standard of Alternative A, Supplies up to 15.4 watts per PoE port, Palm-top Fast Ethernet Switch

Features and Benefits  4 IEEE 802.3at compliant PoE and Ethernet combo ports Up to 30 watts at 24/48 VDC per PoE port Intelligent power consumption detection and classification Redundant dual VDC power inputs -40 to 75°C operating temperature range (T models)   Introduction The EDS-P206A-4PoE switches are smart, 6-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-P206A-4PoE switches enable centralization of the power supply and provide up to 30 watts of power per port. The switches can be used to power IEEE 802.3at compliant powered devices (PD), eliminating the need for additional wiring, and support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical solution for your industrial Ethernet network. In addition, the built-in relay warning function alerts network engineers when power failures or port breaks occur.

Features and Benefits Full-gigabit Ethernet ports IEEE 802.3af/at, PoE/PoE+ standards  Up to 30 watts output per PoE port 24/48 VDC flexible redundant power inputs Intelligent power consumption detection and classification Smart PoE over current and short circuit protection -40 to 75°C operating temperature range (T models)  Introduction The EDS-G205A-4PoE switches are smart, 5-port, unmanaged full-gigabit Ethernet switches supporting Power-over-Ethernet on ports 2 to 5. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-G205A-4PoE switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE 802.3af/at standard devices (PD), eliminating the need for additional wiring, and they support IEEE 802.3/802.3u/802.3x with 10/100/1000M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical high-bandwidth solution for your industrial Ethernet network.

Features and Benefits  Multi-mode or single-mode, with SC or ST fiber connector Link Fault Pass-Through (LFP) -40 to 75°C operating temperature range (T models) DIP switches to select FDX/HDX/10/100/Auto/Force   Introduction The IMC-21A industrial media converters are entry-level 10/100BaseT(X) to 100BaseFX media converters designed to provide reliable and stable operation in harsh industrial environments. The converters can operate reliably in temperatures ranging from -40 to 75°C. The rugged hardware design ensures that your Ethernet equipment can withstand demanding industrial conditions. The IMC-21A converters are easy to mount on a DIN-Rail or in distribution boxes.

HP 5820AF-24XG Switch

Features and Benefits  Multi mode, single mode with SC or ST fiber connector Link Fault Pass-Through (LFP) (media converters should work as a pair) -10 to 60°C operating temperature range DIP Switch to select FDX/HDX/10/100/Auto/Force   Introduction The IMC-21 industrial media converters are entry-level 10/100BaseT(X) to 100BaseFX media converters designed to provide reliable and stable operation in harsh industrial environments. The IMC-21 is a cost-effective solution that runs on either a 12 to 45 VDC power input or 18 to 30 VAC power input. The IMC-21 can operate reliably in temperatures ranging from -10 to 60°C, and the rugged hardware design ensures that your Ethernet equipment can withstand demanding industrial conditions. The IMC-21 is easy to mount on a DIN-Rail or in distribution boxes.

Features and Benefits  Multi-mode or single-mode, with SC or ST fiber connector Link Fault Pass-Through (LFP) -40 to 75°C operating temperature range (T models) DIP switches to select FDX/HDX/10/100/Auto/Force   Introduction The IMC-21A industrial media converters are entry-level 10/100BaseT(X) to 100BaseFX media converters designed to provide reliable and stable operation in harsh industrial environments. The converters can operate reliably in temperatures ranging from -40 to 75°C. The rugged hardware design ensures that your Ethernet equipment can withstand demanding industrial conditions. The IMC-21A converters are easy to mount on a DIN-Rail or in distribution boxes.

Features and Benefits  Multi-mode or single-mode, with SC or ST fiber connector Link Fault Pass-Through (LFP) -40 to 75°C operating temperature range (T models) DIP switches to select FDX/HDX/10/100/Auto/Force   Introduction The IMC-21A industrial media converters are entry-level 10/100BaseT(X) to 100BaseFX media converters designed to provide reliable and stable operation in harsh industrial environments. The converters can operate reliably in temperatures ranging from -40 to 75°C. The rugged hardware design ensures that your Ethernet equipment can withstand demanding industrial conditions. The IMC-21A converters are easy to mount on a DIN-Rail or in distribution boxes.

ACC Patch cable FTP CAT 5e, RJ45, RJ45, 3 m, Grey Other - foil screened twisted pair cable - pair-sequence acc. to EIA/TIA 568 - molded version with strain relief - with length indication on the strain relief - with gold plated contacts - slim line strain relief, suitable for all patch panel Type CAT 5e Network cable F/UTP; 2xRJ45 plug ; foil shielded AWG 26/7 Colour gray Cable length 3m Package poly bag Connectors RJ45

ACC Pach cable FTP CAT 5e, RJ45, RJ45, 1 m, Grey Other - foil screened twisted pair cable - pair-sequence acc. to EIA/TIA 568 - molded version with strain relief - with length indication on the strain relief - with gold plated contacts - slim line strain relief, suitable for all patch panel Type CAT 5e Network cable F/UTP; 2xRJ45 plug ; foil shielded AWG 26/7 Colour gray Cable length 1m Package poly bag Connectors RJ45

8 10/100/1000Base-T PoE ports, Smart Gigabit Ethernet switch, 802.3x Flow Control, StaticTrunk, PortMirroring, IGMP Snooping, 802.1Q VLAN up to 32, VID range 1~4094, LoopBack detection, QoS, Bandwidth Control, Static MAC, Broadcast/Multicast storm control, 802.3af PoE Budget 64W, WebUI control, Smart Console Utility

WENTRONIC 68908 UTP 10/100 pordi jagaja: 2 x CAT5 Ethernet

The RB951G-2HnD is a wireless SOHO Gigabit AP with a new generation Atheros CPU and more processing power. It has five Gigabit Ethernet ports, one USB 2.0 port and a high power 2.4GHz 1000mW 802.11b/g/n wireless AP with antennas built in. In comparison with previous model RB751G-2HnD, it has more powerful 600Mhz CPU (instead of 400Mhz), more RAM - 128MB instead of 64MB, same form factor and price. The device is very small and will look good in any home or office, wall mounting anchor holes are provided. Package contains RouterBOARD 951G-2HnD in a plastic case and power adapter.

Superior ProcessingUbiquiti Networks introduces our proprietary INVICTUS™ core communications processing engine. The speed, power, and efficiency of this integrated circuit enhances the performance of airFiber AF5/AF5U.Efficient Use of 5 GHz BandairFiber AF5/AF5U features 1 MHz center channel resolution with market-leading Power Envelope Tracking technology. airFiber AF5/AF5U accurately and continuously controls transmit power relative to the band edge. The power level automatically tracks to optimize performance near band edges, allowing you to choose the part of the band with the least interference. Long-Range LinksNewly developed for airFiber AF5/AF5U, the patent-pending xRT feature uses an innovative, adaptive multi-channel coding scheme to enhance radio transceiver performance, thereby maximizing your link budget and spectrum utilization – while still maintaining regulatory compliance. This results in links that can span distances from 10 m up to 100+ km.Quick and Easy InstallationThe unique sliding-clamp design of airFiber AF5/AF5U allows mounting hardware to be pre-assembled prior to installation – no more dropped screws at the top of the tower. As an added convenience, the drop-in cradle mount design allows the installer to attach mounting hardware to the pole without having to support the weight of the airFiber radio during installation.Radio Alignment DisplayIntroduced on airFiber AF5/AF5U, the Radio Alignment Display (RAD) makes aiming quicker and easier. The dual, calibrated signal strength indicators display the actual signal strength on the local and remote airFiber radios in real time. The comprehensive array of radio status indicators display the following:• GPS synchronization status• Master/slave mode• RF link status• RF overload warning• Current modulation mode• Link activity and speed for wired management and data ports

AirMax Omni is a Carrier Class omnidirectional antenna that was designed to seamlessly integrate with Rocket M radios (sold separately).Rocket M combines the “brains” in one robust unit, pair Rocket M with AirMax Omni to create powerful 360 omnidirectional coverage. This seamless integration gives network architects unparalleled flexibility and convenience.Rocket Mount Included. AirMax Omni antennas all come with a universal Rocket M mount for easy installation.RF Cables Included. Rugged, weatherproof RF cables are included with AirMax Omni antennas.

Radome Cover 0.9M parabolic/dish for Ubiquiti RocketDish RD-5G34

Hi-gain 16dBi 2X2 MIMO performance for long distance 900MHz applications. Designed to be seamlessly paired with Rocket M900 hardware.Set contains 2pcs Yagi antennas.

3GHz, AirOS, POE-RJ-45 Connector, Standard 802.11n.The Rocket is a rugged, hi-power, very linear 2x2 MIMO radio with enhanced receiver performance. It features incredible range performance (50+km) and breakthrough speed (150+Mbps real TCPI/IP). The device was specifically designed for outdoor PtP bridging and PTMP AirMax base-station applications.Rocket M and AirMax BaseStation/Rocket Antennas have been designed to seamlessly work together. Installing Rocket M on AirMax BaseStation/Rocket Antennas requires no special tools, you simply snap it into place with the mount provided with the Antennas.

The RB400L is low cost series. The RB411L has one miniPCI slot and one Ethernet port. Use this device in an outdoor case for a CPE device, or a point to point wireless link installation. The miniPCI slot allows you to choose your own preferred wireless card model. It’s powered by an Atheros 300MHz CPU and has 32MB of RAM and a Level3 RouterOS license. Differences between RB411 and RB411L can be seen in the file "RB400L differences" which you can download in the left side menu.

The 8P8C RJ45 plug is suitable for Modular applications and features Gold Flash on contacts for optimum data transmission.Type: RJ45 Cat5 PlugStyle: Solid UTP Plug Materials:Contactl: Phospor BronzeContacts: Gold Flash over Nickel underplate.Housing: PolycarbonatePackage include 1pc.

The 8P8C RJ45 plug is suitable for Modular applications and features Gold Flash on contacts for optimum data transmission.Type: RJ45 Cat6 PlugStyle: Solid UTP Plug Materials:Contactl: Phospor BronzeContacts: Gold Flash over Nickel underplate.Housing: PolycarbonatePackage include 1pc.

RouterBOARD 411 with 300MHz Atheros CPU, 32MB RAM, 1 LAN, 1 MiniPCI, 1 MiniPCIe, 1 USB slot, RouterOS L4.The RB411U is a versatile yet very small device. It includes all - a miniPCI slot, a USB 2.0 port and a miniPCI-E slot for connecting a 3G card. A SIM card slot for 3G is also present on the RB411U.RB411U includes RouterOS - the operating system, which can be a router, firewall, bandwidth manager, a mobile 3G router, and more - all at the same time.One small device - with all the power of RouterOS. At a very special price.  SpecificationsCPU Atheros AR7130 300MHz embedded processorMemory 32MB SDRAM onboard memory chipBoot loader RouterBOOTData storage 64MB onboard NAND memory chipEthernet ports One 10/100 Mbit/s Fast Ethernet port supporting Auto-MDI/XMiniPCI slot One MiniPCI Type IIIA/IIIB slotOne MiniPCIe slot for 3G modem (onboard SIM connector)Wireless not built in, possible by adding a miniPCI cardExpansion USB 2.0 with 5V 1A supplyExtras Reset switch, Beeper, Input voltage monitorSerial port One DB9 RS232C asynchronous serial portLEDs Power, NAND activity, 5 user LEDsPower options Power over Ethernet: 10..28V DC (except power over datalines).Power jack: 10..28V DCPower Consumption 3-12WTemperature Operational: -20°C to +70°C (-4°F to 158°F)Humidity Operational: 70% relative humidity (non-condensing)Currently supported OS RouterOS 3.x, Level4 license included